Padrão de fermentação e composição química de silagens de grãos úmidos de milho e sorgo submetidas ou não a inoculação microbiana

Objetivou-se avaliar o padrão de fermentação e a composição química de silagens de grãos úmidos de milho e de sorgo confeccionadas com ou sem o uso de inoculante microbiano. Avaliou-se, no experimento 1, a silagem de grãos úmidos de milho e, no experimento 2, a silagem de grãos úmidos de sorgo. O material foi ensilado em silos experimentais de PVC (50 cm de comprimento e 100 mm de diâmetro), três por tratamento (tempo de armazenagem, com ou sem inoculante) para cada grão. Amostras foram tomadas antes (0) e aos 1, 2, 3, 4, 8, 16, 32 e 64 dias após a ensilagem, totalizando 48 silos experimentais para cada grão. Os tratamentos foram arranjados em delineamento inteiramente casualizado, em esquema fatorial 2 x 9 (com e sem inoculante microbiano, nove tempos de armazenagem), com três repetições para cada grão. Não houve efeito da inoculação e do tempo pós-ensilagem sobre o teor de MS dos grãos úmidos de milho e de sorgo, com médias de 64,13 e 64,03% e de 67,66 e 67,48% para silagens controle e inoculadas, respectivamente. Não houve efeito da inoculação sobre o pH dos grãos úmidos de milho e de sorgo aos 64 dias após ensilagem, com médias de 3,97 e 3,92 e de 3,94 e 3,95 unidades para silagens controle e inoculadas, respectivamente. O inoculante microbiano não promoveu alterações na composição química nem redução de perdas da MS nas silagens de grãos úmidos de milho e de sorgo. Nas condições estudadas, não é necessária inoculação para melhoria nos padrões fermentativos de silagens de grãos úmidos de milho e de sorgo.

Avaliação nutricional da silagem de grãos úmidos de sorgo de alto ou de baixo conteúdo de taninos para leitões na fase de creche

Foram realizados dois experimentos com o objetivo de avaliar a utilização da silagem de grãos úmidos de sorgo (SGUS) de alto ou baixo conteúdo de tanino na alimentação de leitões na fase de creche. No ensaio de digestibilidade, foram utilizados 12 suínos mestiços, machos castrados (peso inicial de 15,9±1,9 kg), alojados em gaiolas para estudos de metabolismo, distribuídos em um delineamento experimental inteiramente casualizado, com quatro repetições, em que a unidade experimental foi constituída por um leitão. O método utilizado foi o de coleta total de fezes e urina. Os valores de MS, proteína, amido, MO e energia digestíveis e os de EM, na matéria natural (68,75% de MS), foram, respectivamente, 43,94; 5,45; 46,67; 63,46%; 2.700 e 2.674 kcal/kg para a SGUS de alto teor de tanino e 40,72; 5,92; 44,08; 63,75%; 2.641 e 2.608 kcal/kg, para SGUS de baixo conteúdo de tanino. O segundo experimento foi conduzido para avaliar o desempenho de leitões e a viabilidade econômica da utilização de rações com diferentes níveis de substituição do milho seco por SGUS de alto ou baixo teor de tanino. Foram utilizados 56 suínos mestiços (14,7±1,9 e 29,2±3,0 kg de pesos inicial e final) distribuídos em um delineamento inteiramente casualizado, com quatro repetições e dois leitões por unidade experimental. Os tratamentos consistiram de uma ração à base de milho e farelo de soja e de outras seis com 33, 66 e 100% de substituição do milho seco por SGUS de alto ou baixo conteúdo de taninos, com base nos valores de energia digestível (ED) desses ingredientes. Não foram observadas diferenças no desempenho dos animais entre os tratamentos, entretanto, houve aumento linear no consumo diário de ração para a SGUS de baixo teor de tanino e redução linear para o custo da ração por quilograma de peso vivo ganho para a SGUS de alto teor de tanino.

Rehydration and shrinkage behaviour of dried pineapple

The shrinking behavior, apparent densities and rehydration indexes of fresh and osmotically pre-treated pineapple slices during air-drying were obtained. The air drying velocity varied from 1.5 to 2.5 m/s and the air temperature from 40 to 70 degreesC. By means of automatic control, it was possible to obtain drying curves under conditions of constant product temperature. Volumetric shrinkage of fresh samples was temperature independent for drying at high air velocities but, at lower velocities, increased with decreasing drying temperature. Osmotically pre-treating the material resulted in reduced shrinkage, as well as drying with product temperature controlled, due to lower drying times needed that led to shorter high temperature exposition. Moisture dependence of apparent density was highly non-linear and could be fitted by an empirical model. Fresh sample rehydration indexes were higher than osmosed ones and increased with increasing temperature, except for pre-treated samples dried at 70 degreesC, probably due to superficial sugar caramelization, which reduced surface water permeability.

Recycling potential of urban solid waste destined for sanitary landfills: the case of Indaiatuba, SP, Brazil

The urban solid waste of the city of Indaiatuba (pop. 175 000), located in the state of São Paulo, was characterized, focusing on the recycling potential. For this purpose, collected waste was subdivided into 27 items, classified by mass and volume. About 90% of this waste was found to be potentially recyclable and only 10% requiring landfilling. The compostable organic matter, in the form of food and garden waste, both with high moisture content (51 and 41%, respectively), represents 54% in mass and 21% in volume. The most common type of plastic in this waste is high density polyethylene, whose estimated disposal is about 5000 kg day(-1). A socio-economic analysis of the waste generation indicates that low-income neighbourhoods discard relatively less packaging and more food waste, shoes and construction debris than middle and high income ones, which may be due to low purchasing power and schooling. Our findings indicate that more aluminium and uncoloured polyethylene terephthalate is discarded in the warmest months of the year, probably due to a greater consumption of canned and bottled drinks.

Structural and electrical characterization of semiconducting barium-lead-titanate ceramics

BaTiO3 is usually doped to achieve the temperature stability required by device applications, as well as to obtain a large positive temperature coefficient anomaly of resistivity (PTCR). Uniform distribution of dopants among the submicron dielectric particles is the key for optimal control of grain size and microstructure to maintain a high reliability. The system Ba0.84Pb0.16TiO3 was synthesized from high purity BaCO3, TiO2, PbO oxide powders as raw materials. Sb2O3, MnSO4 and ZnO were used as dopants and Al2O3, TiO2 and SiO2 as grain growth controllers. Phase composition was analyzed by using XRD and the microstructure was investigated by SEM. EDS attached to SEM was used to analyze phase composition specially related to abnormal grain growth. Electrical resistivities were measured as a function of temperature and the PTCR effect characterized by an abrupt increase on resistivity.

Influence of drying conditions on the rheological properties of prunes

Rheological properties of rehydrated prunes were obtained applying compression-relaxation tests by using a Texture Analyzer TAXT2i. A mathematical development was adopted to determine the stress and area, along the deformation. Experimental data of stress versus time was fitted by using three different rheological models: generalized Maxwell, Normand & Peleg and Maxwell. Results showed that generalized Maxwell model can be used to describe the viscoelastic behavior of the samples. The rheological parameters obtained indicated that prunes exhibited elastic behavior more pronounced at low moisture content and drying air temperature. At high moisture content and temperature the sample became a more viscous and less rigid.

CYTOMORPHOLOGICAL AND IMMUNOCYTOCHEMICAL EVALUATION OF FINE NEEDLE ASPIRATES FROM HIGH-GRADE NON-HODGKINS-LYMPHOMAS

1. Fine needle aspirates from ten patients with high-grade malignant non-Hodgkin's lymphomas were analyzed by cytomorphology and immunocytochemistry.2. The following morphologic diagnoses were made: lymphoblastic lymphoma (3 cases), Burkitt's lymphoma (3 cases), mixed small and large cell lymphomas with predominance of large cells (2 cases), and centroblastic lymphoma (2 cases). Immunocytochemistry showed a B-cell phenotype in five cases and a T-cell phenotype in four. One case of lymphoblastic lymphoma was negative for the T and B cell markers used.3. The results of histological and immunohistochemical analyses performed on surgical biopsies from 8 patients confirmed the morphological diagnosis in all cases. Two cases of Burkitt's lymphoma were submitted only to cytological and immunological diagnosis.4. The high diagnostic accuracy of combined cytomorphology and immunocytochemical assessment of fine needle aspirate samples validates the use of the technique in the diagnostic work-up of high-grade non Hodgkin's lymphomas.

Role of oxygen vacancies in the magnetic and dielectric properties of the high-dielectric-constant system CaCu3Ti4O12: An electron-spin resonance study

We report experiments of electron spin resonance (ESR) of Cu2+ in polycrystalline samples of CaCu3Ti4O12 post-annealed in different atmospheres. After being synthesized by solid state reaction, pellets of CaCu3Ti4O12 were annealed for 24 h at 1000 degrees C under air, Ar or O-2. Our temperature dependent ESR data revealed for all samples nearly temperature independent g value (2.15(1)) and linewidth for T > T-N approximate to 25 K. However, the values of ESR linewidth are strongly affected by the oxygen content in the sample. For instance, argon post-annealed samples show a much larger linewidth than the O-2 or air post-annealed samples. We attribute this broadening to an increase of the dipolar homogeneous broadening of the Cu2+ ESR lines due to the presence of oxygen vacancies which induce an S=1/2 spin inside the TiO6 octahedra. Correlation between a systematic dependence of the ESR linewidth on the oxygen content and the high dielectric constant of these materials is addressed. Also, ESR, magnetic susceptibility, and specific heat data for a single crystal of CaCu3Ti4O12 and for polycrystals of CdCu3Ti4O12 are reported.

Genotyping of Epstein-Barr virus in Brazilian Burkitt's lymphoma and reactive lymphoid tissue - Type A with a high prevalence of deletions within the latent membrane protein gene

Both Epstein-Barr virus (EBV) types A and B are found in endemic Burkitt's lymphoma (BL) occurring in equatorial Africa. We studied 17 cases of Brazilian BL previously demonstrated to be EBV-positive to determine the EBV type as well as the presence of a characteristic 30 bp deletion within the 3' end of the latent membrane protein-1 (LMP-1) gene that may be important to the pathogenesis of several EBV-associated neoplasms. All case in which the age was known were children. We found type A EBV in 13 of 14 (93%) evaluable cases, and type B in one case. The LMP-1 deletion was found in 12 of 15 (80%) evaluable cases, including the one case of type B EBV, and a similar high prevalence (59%) of the deletion was detected in EBV-positive normal and reactive lymphoid tissues from individuals from the same geographic region. The high proportion of cases associated with type A EBV suggests that immunodeficiency is not an important factor in the pathogenesis of Brazilian BL, in contrast to endemic African BL. The presence of the LMP-1 deletion in a high prevalence in the normal population in this region is unexplained.

Avaliação da silagem de grãos úmidos de milho

This work had the objective of evaluating the effects of different percentages of corn (Zea mays L.) cob on the quality of the silage of high-moisture corn grains. The following treatments were studied: percentages of corn cob in the silage (0, 5, 10, 15 and 20%); period of sampling after opening the silos (zero, two, four and six days). The factorial arrangement 5 × 4 was studied according to a completely randomized block design with three replications. The variables studied were not affected by the sampling period. The buffering capacity and the pH were not affected by the cob, while the percent soluble carbohydrates and amoniacal nitrogen increasing until 1.2 and 1.89 unit percent, respectively. Increasing the amount of corn cobs reduced the contents of DM (from 63.9% to 58.6%), CP (from 10.0% to 7.3%), EE (from 4.87% to 3.92%) and the values of DMIVD (from 90.5% to 79.1%) in the silages and increasing the contents of acid detergente fiber (ADF) (from 3.3% to 12.9%) and neutral detergente fiber (NDF) (from 15.16% to 26.1%). The values of brute energy (BE) were not affected (P>0.01) by the cob corn in the silage.

Desempenho e características da carcaça de tourinhos santa gertrudes confinados, recebendo dietas com alto concentrado e níveis crescentes de polpa cítrica peletizada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Stagnant effective thermal conductivity of agro-industrial residues for solid-state fermentation

The stagnant effective thermal conductivities (K0) of sugar cane bagasse (SCB), wheat bran (WB), orange pulp and peel (OPP) and their combination (weight proportion 1:2:2 SCB/OPP/WB) were obtained using the line heat source method. These solid materials were applied to pectinase production via solid-state fermentation. The moisture content ranged from 4 to 80% (w.b.). A conduction mechanism through the porous media was observed, along with conduction through a liquid film and contact thermal resistance between the samples and the probe. K0 was low for intermediate moisture contents and approached the molecular conductivity of water for high moisture contents. © 2013 Copyright Taylor and Francis Group, LLC.

Extrusion of flavored corn grits: Structural characteristics, volatile compounds retention and sensory acceptability

The effects of the moisture content of the raw material, extrusion temperature and screw speed on flavor retention, sensory acceptability and structure of corn grits extrudates flavored with isovaleraldehyde, ethyl butyrate and butyric acid were investigated. Higher temperature resulted in more expanded extrudates with lower density and cutting force, while higher moisture content increased ethyl butyrate retention. The most acceptable extrudates were those obtained with low moisture content, under conditions of high extrusion temperature and high screw speed, or low screw speed and low extrusion temperature, whereas the aroma intensity closest to the ideal was observed under conditions of low extrusion temperature and low moisture content of the raw material. © 2013 Elsevier Ltd.

Degradabilidade de grãos secos e ensilados de sorgo, com e sem tanino, submetidos à granulometrias

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Substituição dos grãos secos de milho pela silagem de grãos úmidos de milho para vacas da raça holandesa em lactação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)