912 resultados para Fitted
Resumo:
The spatial variability of mechanical resistance to penetration (PR) and gravimetric moisture (GM) was studied at a depth of 0-0.40 m, in a ferralsol cropped with corn, and under conventional tillage in llha Solteira, Brazil (latitude 20 degrees 17'S, and longitude 52 degrees 25'W). The purpose of this study was to analyse and to try explaining the spatial variability of the mentioned soil physical properties using geostatistics. Soil data was collected at points arranged on the nodes of a mesh with 97 points. Geostatistics was used to analyse the spatial variability of PR and GM at four depths: 0-0. 1, 0.1-0.2, 0.2-0.3 and 0.3-0.4 m. PR showed a higher variability of data, with coefficients of variation of 52.39, 30.54, 16.91, and 15.18%, from the surface layers to the deepest layers. The values of the coefficients of variation for GM were lower: 9.99, 5.13, 5.59, and 5.69%. Correlation between GM and PR for the same soil layers was low. Penetration resistance showed spatial structure only in the 0.30-0.40 m layer, while gravimetric moisture showed spatial structure at all depths except for 0-0. 10 m. All the models of fitted semivariograms were spherical and exponential, with ranges of 10-80 m. Data for the variable 'GM' in the 0.20-0.30 and 0.30-0.40 m layers revealed a trend in data attributed to the occurrence of subsurface water flow. (C) 2005 Elsevier B.V. All rights reserved.
Resumo:
The contamination by metal ions has been occurring for decades through the introduction of liquid effluent not treated, mainly from industrial activities, rivers and lakes, affecting water quality. For that the effluent can be disposed in water bodies, environmental standards require that they be adequately addressed, so that the concentration of metals does not exceed the limits of standard conditions of release in the receptor. Several methods for wastewater treatment have been reported in the literature, but many of them are high cost and low efficiency. The adsorption process has been used as effective for removal of metal ions. This paper presents studies to evaluate the potential of perlite as an adsorbent for removing metals in model solution. Perlite, in its natural form (NP) and expanded (EP), was characterized by X-ray fluorescence, X-ray diffraction, surface area analysis using nitrogen adsorption (BET method), scanning electron microscopy and Fourier transform infrared spectroscopy. The physical characteristic and chemical composition of the material presented were appropriate for the study of adsorption. Adsorption experiments by the method of finite bath for model solutions of metal ions Cr3+, Cu2+, Mn2+ and Ni2+ were carried out in order to study the effect of pH, mass of the adsorbent and the contact time on removal of ions in solution. The results showed that perlite has good adsorption capacity. The NP has higher adsorption capacity (mg g-1) than the EP. According to the values of the constant of Langmuir qm (mg g-1), the maximum capacity of the monolayer was obtained and in terms of proportion of mass, we found the following order experimental adsorption: Cr3+ (2.194 mg g- 1) > Ni2+ (0.585 mg g-1) > Mn2+ (0.515 mg g-1) > Cu2+ (0.513 mg g-1) and Cr3+ (1.934 mg g-1)> Ni2+ (0.514 mg g-1) > Cu2+ (0.421 mg g-1) > Mn2+ (0.364 mg g-1) on the NP and EP, respectively. The experimental data were best fitted the Langmuir model compared to Freundlich for Cu2+, Mn2+ and Ni2+. However, for the Cr3+, both models fit the experimental data
Resumo:
OBJETIVO: Testar os efeitos de uma dieta com baixo teor de gordura comparada a uma dieta com gordura de babaçu sobre o estado nutricional em ratos jovens com colestase obstrutiva. MÉTODOS: Submetemos 40 ratos divididos em quatro grupos de 10 animais a partir do P21 (21º dia pós-natal) até o P49 a dois dos seguintes tratamentos: ligadura e ressecção do ducto biliar comum ou operação simulada e dieta com baixo teor de gordura (óleo de milho fornecendo 4,5% da quantidade total de calorias) ou dieta com gordura de babaçu (essa gordura fornecendo 32,7% e óleo de milho fornecendo 1,7% da quantidade total de calorias). Foi mensurado o ganho de peso a cada 4 dias do P25 ao P49. A função de crescimento de Verhulst foi ajustada aos valores de ganho de peso. A velocidade e a aceleração de crescimento nos mesmos momentos foram estimadas usando a mesma equação. Foram mensurados: quantidade de ração ingerida e ingestão energética total do P21 ao P49, utilização de energia do P25 ao P49, gordura absorvida e balanço de nitrogênio (BN) do P42 ao P49. A ANOVA com dois fatores e o método de S.N.K para comparações pareadas foram utilizados para estudar os efeitos, sobre as variáveis, da colestase e das dietas e sua interação (p<0,05). RESULTADOS: em ratos com colestase e dieta com baixo teor de gordura, houve maior velocidade de crescimento no P45, maior aceleração de crescimento no P41 e P45, maior utilização de energia, maior percentual de gordura absorvida e maior BN do que em ratos com colestase e dieta com gordura de babaçu. CONCLUSÃO: A dieta com baixo teor de gordura atenua a restrição de crescimento provocada pela colestase e proporciona melhor aproveitamento da dieta e maior incorporação da proteína ingerida do que a dieta com gordura de babaçu.
Resumo:
The studied region, named Forquilha and localized in northwestern Central Ceará domain (northern portion of Borborema Province), presents a lithostratigraphic framework constituted by paleoproterozoic metaplutonics, metasedimentary sequences and neoproterozoic granitoids. The metasedimentary rocks of Ceará group occupy most part of the area. This group is subdivided in two distinct units: Canindé and Independência. Canindé unit is represented basically by biotite paragneisses and muscovite paragneisses, with minor metabasic rocks (amphibolite lens). Independência sequence is composed by garnetiferous paragneisses, sillimanite-garnet-quartz-muscovite schists and quartz-muscovite schists, pure or muscovite quartzites and rare marbles. At least three ductile deformation events were recognized in both units of Ceará group, named D1, D2 and D3. The former one is interpreted as related to a low angle tangential tectonics which mass transport is southward. D2 event is marked by the development of close/isoclinal folds with a N-S oriented axis. Refolding patterns generated by F1 and F2 superposition are found in several places. The latest event (D3) corresponds to a transcurrent tectonics, which led to development of mega-folds and several shear zones, under a transpressional regime. The mapped shear zones are Humberto Monte (ZCHM), Poço Cercado (ZCPC) and Forquilha (ZCF). Digital image processing of enhanced Landsat 7-ETM+ satellite images, combined with field data, demonstrate that these penetrative structures are associated with positive and negative geomorphologic patterns, distributed in linear and curvilinear arrangements with tonal banding, corresponding to the ductile fabric and to crests. Diverse color composites were tested and RGB-531 and RGB-752 provided the best results for lineament analysis of the most prominent shear zones. Spatial filtering techniques (3x3 and 5x5 filters) were also used and the application of Prewitt filters generated the best products. The integrated analysis of morphological and textural aspects from filtered images, variation of tonalities related to the distribution of geologic units in color composites and the superposition over a digital elevation model, contributed to a characterization of the structural framework of the study area. Kinematic compatibility of ZCHM, ZCPC, ZCF shear zones, as well as Sobral-Pedro II (ZCSPII) shear zone, situated to the west of the study area, was one of the goal of this work. Two of these shear zones (ZCHM, ZCPC) display sinistral movements, while the others (ZCSPII, ZCF) exhibit dextral kinematics. 40Ar/39Ar ages obtained in this thesis for ZCSPII and ZCPC, associated with other 40Ar/39Ar data of adjacent areas, indicate that all these shear zones are related to Brasiliano orogeny. The trend of the structures, the opposite shear senses and the similar metamorphic conditions are fitted in a model based on the development of conjugate shear zones in an unconfined transpression area. A WNW-ESE bulk shortening direction is infered. The geometry and kinematic of the studied structures suggest that shortening was largely accommodated by lateral extrusion, with only minor amounts of vertical stretch
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In this dissertation we studied the seismic activity in the São Caetano county, Pernambuco State, Northeastern Brazil, located near the Pernambuco Lineament. The Pernambuco Lineament is a one of Neoproterozoic continental-scale shear zones that deforms the Borborema province. The seismicity estudied occurred in a NE trending branch of Pernambuco Lineament. The seismic activity in São Caetano started in 2006 and in May 20th, 2006 a 4,0 mb earthquake hit there. This was the largest earthquake ever reported in Pernambuco State. This dissertation is the result of a campaign done in the period from Februay 1th 2007 to July 31 th 2007. In this campaign up to nine three-component digital seismographic stations were deployed and the collected data was used to determine hypocenters and focal mechanism. A total of 214 earthquakes, recorded at least by three stations, were analyzed. To determine hypocenters and time origin the HYPO71 program was used assuming a half-space model with parameters : VP (P-wave velocity) equal to 5.90 km/s and the ratio VP/VS 1.70, where VS is the S-wave velocity. The earthquakes hypocentral distribution was approximately 4 km long and agrees with the NE-SW direction of the Pernambuco Lineamento branch. Hypocentres depth range from 2 to 8 km. The composed focal mechanism was made from a group of 14 selected earthquakes. We try firstly to find the fault plane solution matching the polarity distribution at stations, using the FPFIT program. The result was 43 deg ± 15 deg for strike, 59 deg ± 9 deg for dip and -142 deg ± 15 deg for rake. We also fitted a plane using the hypocentral distribution to obtain the dip and azimuth of the hypocentral distribution. The results obtained by this fit were 58 deg for the azimuth, 55 deg for the dip and -155 deg for rake. This result shows a mechanism of a strike-slip dextral fault with a normal component. This dissertation shows, once more, that there is a good correlation between the seismic activity and geological features in the region near the Pernambuco Lineament and its NE branches
Resumo:
OBJETIVO: Descrever resultados da aplicação de um sistema de monitoramento de fatores de risco para doenças crônicas não transmissíveis (DCNT) por meio de entrevistas telefônicas (SIMTEL) no município de Botucatu/SP. MÉTODOS: Entrevistou-se amostra probabilística (n = 1.410) da população de indivíduos com 18 ou mais anos de idade residente em domicílios do município de Botucatu/SP, conectados à rede de telefonia fixa. A amostragem foi realizada em três etapas: sorteio de linhas do cadastro da companhia telefônica; seleção de linhas residenciais ativas; sorteio para entrevista de um morador com 18 ou mais anos de idade por linha elegível. A taxa de sucesso (entrevistas realizadas: linhas elegíveis sorteadas) foi de 86,9%, sendo de 5,8% a proporção de recusas. Foi aplicado um questionário com 74 questões sobre consumo alimentar, atividade física, tabagismo, consumo de bebidas alcoólicas, peso e estatura recordados e auto-referência a diagnósticos médicos de hipertensão arterial e diabetes. Apresentam-se estimativas brutas da prevalência de fatores de risco/proteção para DCNT e estimativas ajustadas que levam em conta a distribuição segundo idade, sexo e escolaridade da população adulta total do município no Censo Demográfico de 2000. RESULTADOS: Foram observadas altas prevalências de excesso de peso (46.7%) e sedentarismo (57.9%). Houve desvantagem para os homens quanto ao consumo excessivo de bebidas alcoólicas e vantagem no que se refere à prática de atividade física em 1 ou mais dias da semana. Nas mulheres, observou-se associação inversa entre escolaridade e os seguintes fatores de risco: obesidade, excesso de peso, sedentarismo, consumo de carnes com gordura e hábito de fumar. Resultado semelhante foi observado para homens, exceto com relação a obesidade e excesso de peso. CONCLUSÕES: A segunda experiência de aplicação do SIMTEL confirmou o desempenho satisfatório e a utilidade do sistema em nosso meio.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Weight-age and hip height-age relations of Nellore calves, from birth to 10 months old were fitted using a logistic model including sex and year of birth as fixed effects. Calves and their dams were reared on natural pasture using continuous grazing system. The crude protein content and total digestible nutrients were analyzed for pasture selected by the animals. The weights of the calves were adjusted to 205 days and 365 days. There were no significant effects of sex and birth year on the growth curve parameters, but there were significant effects of sex on hip height. The average weight (a parameter) at 10 months of age was 170 kg and the inflection point was observed at 93.5 days old. When weight-age and hip height-age curves were combined in the same graph, the intersection occurred at 142 days. The number of days to gain 160 kg from birth to 205 days of age (adjusted) and number of days to gain 240 kg from 205 days to slaughter was different between the birth years, which were probably due to the quality of the natural pastures. It is necessary to implement nutritional management strategies such as high quality pasture and/or feeding supplementation for calves once they reach three months of age.
Resumo:
Objetivou-se avaliar o crescimento de novilhas de diferentes grupos genéticos no sistema de produção superprecoce. Utilizaram-se 132 novilhas dos seguintes grupos genéticos: 18 ¾ Canchim × ¼ Nelore (¾ CN); 18 ½ Canchim × ½ Nelore (½ CN); 24 Simbrasil -⅝ Simental × ⅜ Nelore; e 72 Three-cross ¼ Simental × ¼ Nelore × ½ Angus. As novilhas foram desmamadas aos 210 dias de idade, com 247,4 ± 16,5 kg de peso vivo (PV), mantidas em creep-feeding durante a fase de cria e confinadas por 132 ± 14 dias até atingirem 350 kg PV e 5 mm de gordura subcutânea, quando, então, foram abatidas. Os grupos genéticos não influenciaram o ganho de peso médio diário, porém a espessura de gordura subcutânea do dorso (EGS) e da garupa (EGG) foi maior nos animais Three-cross, que apresentaram os maiores valores iniciais (1,07 kg/dia). Não houve diferença na área de olho-de-lombo (AOL) inicial, porém a os animais Three-cross apresentaram os maiores valores iniciais. Nos animais do grupo Three-cross, a área de olho-de-lombo (AOL) final e ajustada para 100 kg de peso vivo (PV) foi inferior à observada nos demais grupos, porém o peso final foi superior ao do grupo Simbrasil, com tempo intermediário de confinamento. Ajustando-se os valores de AOL e EGG para o menor número de dias de confinamento (114 dias), animais Simbrasil apresentam maior valor de AOL final e os animais Three-cross e Simbrasil, maior EGG final.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The buffalo is a domestic animal species of growing world-wide importance. Research to improve genetic improvement programs is important to maintain the productivity of buffalo. The objective this research was to evaluate the growth of Brazilian buffalo to two years of age with different growth curves. Growth curves consolidate the information contained in the weight-age data into three or four biologically meaningful parameters. The data included 31,452 weights at birth and 120, 205, 365, 550 and 730 days of buffalo (n = 5,178) raised on pasture without supplementation. Logistic, Gompertz, quadratic logarithmic, and linear hyperbolic curves (designated L, G, QL, and LH, respectively) were fitted to the data by using proc NUN of SAS (SAS Institute, Inc., Cary, NC, USA). The parameters estimates for L [WT= A * (((1 + exp (-k * AGE)))**-m)] were A = 865.1 +/- 5.42; k= 0.0028 +/- 0.00002; M= 3.808 +/- 0.007; R(2) = 0.95. For G [WT= A * exp (-b * exp (-k * age)] the parameters estimates were A= 967.6 +/- 7.23; k = 0.00217 +/- 0.000015; b = -2.8152 +/- 0.00532. For QL [WT= A + b*age + k*(age*age) + m*log (age)] parameters estimates were A= 37.41 +/- 0.48; k= 0.00019 +/- 6.4E(-6); b= 0.539 +/- 0.006; m= 2.32 +/- 0.23; R(2)=0.96. For LH [WT= A + b*AGE + k*(1/AGE)] the parameters estimates were A= 23.15 +/- 0.44; k=15.16 +/- 0.66; b= 0.707 +/- 0.001; R(2)= 0.96. Each of these curves fit these data equally well and could be used for characterizing growth to two years in beef buffalo.
Resumo:
Objetivou-se, no presente estudo, avaliar a produção de leite de caprinos leiteiros da região sudeste do Brasil, com intuito de verificar os fatores de meio e estimar os parâmetros genéticos pelo método dos mínimos quadrados (MMQ). Os controles de 1336 lactações foram inicialmente ajustados pela função multifásica (difásica) e calculou-se a produção de leite total (PLT). Os dados foram provenientes de sete propriedades e três raças (Parda Alpina, Saanen e Toggenburg). A média e o erro-padrão da PLT estimados pelo MMQ foram de 635,31 ±39,75 kg. A interação ano x estação do parto influenciou a PLT. em um dos anos estudados, a PLT foi menor para as cabras paridas no final da estação. Nas três estações de parto, observou-se comportamento quadrático da PLT, em função dos anos de parto. Para as três estações, a PLT aumentou de 1986 até meados de 1990, decrescendo em seguida. A idade de máxima PLT foi observada aos 46,65 meses. Das três raças estudadas, observou-se que as raças Parda Alpina e Saanen apresentaram alternância de superioridade na PLT em algumas fazendas, porém maiores que a Toggenburg. Os coeficientes de herdabilidade e repetibilidade da PLT estimados pelo MMQ foram de 0,296 ± 0,079 e 0,277 ± 0,033, respectivamente. Estes resultados revelam baixa confiabilidade em poucas observações dessas características ou na inconsistência das estimativas da função multifásica. Como a PLT é uma característica limitada ao sexo, sugere-se o teste de progênie como método de seleção mais eficiente para os reprodutores e uso de inseminação artificial como processo de disseminação do material genético selecionado.
Resumo:
Oitenta e seis machos jovens, não-castrados, divididos em quatro grupos raciais - Nelore (n=20), Canchim (n=17), ½ Canchim ×Nelore (CN) (n=25) e ¾ Canchim ×Nelore (TQ) (n=24) - foram pesados a cada 28 dias para avaliação de ganho de peso (kg/dia), ingestão de matéria seca (kg/dia) e conversão alimentar. Ao atingirem peso de abate médio de 450 kg e espessura de gordura subcutânea superior a 4 mm, os animais foram abatidos para avaliação do peso e do rendimento de carcaça e de cortes comerciais do traseiro, área de olho-de-lombo, espessura de gordura subcutânea (mm), marmorização, força de cisalhamento, extrato etéreo (%) e perdas por cocção. O grupo Nelore apresentou-se adequado ao sistema de produção proposto, revelando desempenho similar ao dos animais CN quanto ao ganho de peso (1,18 e 1,29 kg para Nelore e CN, respectivamente) e conversão alimentar (6,90 e 7,04 para Nelore e CN, respectivamente). A ingestão de matéria seca (kg/dia) diferiu entre os grupos raciais (11,82; 9,39; 8,90 e 8,31 para Canchim, TQ, CN e Nelore, respectivamente). O peso da carcaça (kg) dos Canchim (291,14) foi maior e diferiu dos outros grupos (250,74; 246,64 e 244,18 para TQ, CN e Nelore, respectivamente). Apesar de o rendimento de carcaça ter sido maior no grupo Nelore (58,75%), os animais desse grupo apresentaram menor rendimento de cortes nobres que de traseiro, com diferença para o contrafilé (10,22; 11,55; 11,64 e 11,18 para Nelore, Canchim, TQ e CN, respectivamente). Os valores de força de cisalhamento comprovam que o abate de animais jovens garante carne macia, independentemente do grupo genético estudado.