Value of information in product recovery decisions: A Bayesian approach

There is a widespread recognition of the need for better information sharing and provision to improve the viability of end-of-life (EOL) product recovery operations. The emergence of automated data capture and sharing technologies such as RFID, sensors and networked databases has enhanced the ability to make product information; available to recoverers, which will help them make better decisions regarding the choice of recovery option for EOL products. However, these technologies come with a cost attached to it, and hence the question 'what is its value?' is critical. This paper presents a probabilistic approach to model product recovery decisions and extends the concept of Bayes' factor for quantifying the impact of product information on the effectiveness of these decisions. Further, we provide a quantitative examination of the factors that influence the value of product information, this value depends on three factors: (i) penalties for Type I and Type II errors of judgement regarding product quality; (ii) prevalent uncertainty regarding product quality and (iii) the strength of the information to support/contradict the belief. Furthermore, we show that information is not valuable under all circumstances and derive conditions for achieving a positive value of information. © 2010 Taylor & Francis.

Enhancement of ferromagnetic properties in In1.99Co0.01O3 by additional Cu doping

This paper reports room-temperature ferromagnetism in Co- and Cu-doped In2O3 samples synthesized by a solid-state reaction method. Structure and composition analyses revealed that Co and Cu were incorporated into the In2O3 lattices. Photoluminescence measurement revealed an additional emission at 520 urn from these doped samples. The magnetic measurement showed that additional Cu doping greatly enhanced the ferromagnetism of In1.99Co0.01O3 bulk samples. The implication of the effects of additional Cu doping is also discussed. (c) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Electric field enhancement in guided-mode resonance filters

Electric fields inside guided-mode resonance filters (GMRFs) may be intensified by resonance effects. The electric field enhancement is investigated in two GMRFs: one is resonant at normal incidence, the other at oblique incidence. It is shown that the two GMRFs exhibit different behaviors in their electric enhancement. Differences between the electric field distributions of the two GMRFs arise because coupling between counter-propagating modes occurs in the first case. It is also shown that the order of the electric field of maximum amplitude can be controlled by modulation of the dielectric constant of the grating. (c) 2006 Optical Society of America.

Enhancement of near-band edge photoluminescence of ZnO thin films by employing MgF2 buffer layer

ZnO/MgF2/ZnO sandwich structure films were fabricated. The effects of a buffer layer on structure and optical properties of ZnO films were investigated by X-ray diffraction, photoluminescence, optical transmittance and absorption measurements. Measurement results showed that the buffer layer had the effects of improving the quality of ZnO films and releasing the residual stresses in the films. The near-band edge emissions of ZnO films deposited on the MgF2 buffer layer were significantly enhanced compared with those deposited on bare substrate due to the smaller lattice mismatch between MgF2 and ZnO than that between fused silica and ZnO. (c) 2006 Elsevier B.V. All rights reserved.

Enhancement of near-band-edge photoluminescence of ZnO thin films in sandwich configuration at room temperature

ZnO/ITO/ZnO sandwich structure films were fabricated. The effects of buffer layer on the structure and optical properties of ZnO films were investigated by x-ray diffraction (XRD), photoluminescence, optical transmittance, and absorption measurements. XRD spectra indicate that a buffer layer has the effects of lowering the grain orientation of ZnO films and increasing the residual stresses in the films. The near-band-edge emissions of ZnO films deposited on both single indium tin oxide (ITO) buffer and ITO/ZnO double buffers are significantly enhanced compared with that deposited on a bare substrate due to the quantum confinement effect. (C) 2006 American Institute of Physics.

Geomorphological considerations for the introduction of boulders and groynes for fisheries enhancement: assessment of River Eden at Carhead

This report seeks to briefly provide geomorphological guidance over the introduction of 'habitat enhancement' features for fisheries improvement which is an expanding area of interest throughout the region. This document is a primary attempt to draw together the salient details from the large quantity of literature published in recent years with reference to boulder introduction and to groyne/deflector placement in NW rivers. Secondly the potential introduction of such features is assessed, with reference to the proposed works at Carhead on the Eden.

Optimization of near-field optical field of multi-layer dielectric gratings for pulse compressor

Multi-layer dielectric (MLD) gratings for pulse compressors in high-energy laser systems should provide high diffraction efficiency as well as high laser induced damage thresholds (LIDT). Nonuniform optical near-field distribution is one of the important factors to limit their damage resistant capabilities. Electric field distributions in the gratings and multi-layer film region are analyzed by using Fourier modal method. Optimization of peak electric field in the gratings ridge is performed with a merit function, including both diffraction efficiency and electric field enhancement when the top layer material is HfO2 and SiO2, respectively. A set of optimized gratings parameters is obtained for each structure, which reduce the peak electric field within the gratings ridge to being respective 1.39 and 1.84 times the value of incident light respectively. Finally, we also discuss the effects of gratings refractive index, gratings sidewall angle and incident angle on peak electric field in the gratings ridge. (c) 2006 Elsevier B.V. All rights reserved.

River Wyre salmon and sea trout spawning habitat restoration / creation project. Gravel enhancement schemes.

As part of an overall desire to maintain and improve the migratory salmonid population in the River Wyre, a project was commissioned to investigate remedial action which may improve and enhance spawning success and lead to an eventual improvement in the status of adult stocks. The report, titled "River Wyre Salmon and Sea Trout Spawning Habitat Restoration/Creation Project", concluded that usable spawning gravels appeared to be in short supply in the River Wyre catchment and may be the limiting factor influencing the returning adult stock, as juvenile nursery habitat was not found to be limiting. This report looks at gravel enhancement schemes to improve River Wyre salmon and sea trout spawning habitat restoration. It examines methods for gravel enhancement schemes: mechanical cleaning and construction of gravel addition structures. Includes sites figures of sites identified for enhancement.

Smoked marine fish from Western Region, Ghana: a value chain assessment

The value chain analysis of ths report focused on smoked marine fish- overwhelmingly the most important fish product originating in Western Region, Ghana. Smoked fish from Western Region is mainly destined for the domestic market where demand is very strong. Small quantities of smoked fish are destined for markets in Togo, Benin and Nigeria. The underlying objective of the fisheries value chain analysis is to identify opportunities for growth in the fisheries value chain, with an emphasis on those opportunities that have the potential to generate significant additional livelihoods, particularly at the level of the fishing communities and for low-income groups. The results from the value chain analysis will be used to identify pilot interventions to promote those livelihood outcomes. The main focus for the study is smoked fish (major species/product forms) destined for domestic markets. However, work will also be undertaken on the fresh fish trade and frozen fish to find out more about the significance of these value chains.

Financial Value Added FVA: uma nova ferramenta para a medição do desempenho financeiro das empresas

O objetivo dessa pesquisa é apresentar uma ferramenta alternativa ao valor econômico adicionado na mensuração da performance empresarial correlacionada com o valor de mercado. Na revisão da literatura apresenta-se o conceito de estrutura e custo de capital, utilizando a metodologia do CAPM e do APT. São igualmente apresentadas as principais medidas financeiras de desempenho tais como: retorno operacional sobre o investimento, retorno sobre o patrimônio liquido, retorno sobre os ativos, além de outras formas para cálculo do retorno. Na sequência introduzimos o conceito de lucro residual e o valor econômico adicionado, discutindo suas vantagens, desvantagens, dificuldades e limitações dessa ferramenta. Através do EVA podemos calcular o valor de mercado adicionado, fundamental para o cálculo do valor patrimonial ajustado. Também é apresentado nessa obra a interpretação do EVA pela ótica do modelo Fleuriet de planejamento financeiro. Após essa explanação teórica é apresentado o Financial Value Added proposto por esse trabalho, como alternativa ao Valor Econômico Adicionado na mensuração do desempenho empresarial. Essa ferramenta exclui da base de cálculo as receitas e despesas econômicas, uma vez que as mesmas em alguns casos distorcem o resultado como é constatado no teste com as empresas: Sadia S.A. e Perdigão S.A. onde os resultados foram 54% na Sadia e 13% na Perdigão superiores ao EVA. Em nenhum momento argumenta-se a substituição do EVA, apenas a introdução do FVA como alternativa nos casos em que o EVA não funcione adequadamente.

Impacts of climate change and variability on fish value chains in Uganda

This study examines the vulnerability of fish pr oduction in Uganda, particularly as it r elates to the predicted impacts from climate change, using the concept of the value chain. The value chain approach has been recommended as a useful tool to study specific challenges facing a sector resulting from various drivers of change, including climate. Critically, such analyses can reveal context-specific response strategies to enhance a sector (Jacinto and Pomer oy 2010). The specific purpose of the study was to identify curr ent and potential impacts of climate change and corresponding adaptation strategies in fish value chains. The study builds upon information fr om earlier value chain analyses on fisheries and aquaculture production in Uganda to provide a more in-depth understanding of issues facing the fish industry, in particular, those to be incorporated in the CGIAR Resear ch Program Livestock and Fish.