Evidences of the Cerium Oxide-Catalysed DPF Regeneration in a Real Diesel Engine Exhaust

The active phase Ce0.5Pr0.5O2 has been loaded on commercial substrates (SiC DPF and cordierite honeycomb monolith) to perform DPF regeneration experiments in the exhaust of a diesel engine. Also, a powder sample has been prepared to carry out soot combustion experiments at laboratory. Experiments performed in the real diesel exhaust demonstrated the catalytic activity of the Ce–Pr mixed oxide for the combustion of soot, lowering the DPF regeneration temperature with regard to a counterpart catalyst-free DPF. The temperature for active regeneration of the Ce0.5Pr0.5O2-containing DPF when the soot content is low is in the range of 500–550 °C. When the Ce0.5Pr0.5O2-containing DPF is saturated with a high amount of soot, pressure drop and soot load at the filter reach equilibrium at around 360 °C under steady state engine operation due to passive regeneration. The uncoated DPF reached this equilibrium at around 440 °C. Comparing results at real exhaust with those at laboratory allow concluding that the Ce0.5Pr0.5O2-catalysed soot combustion in the real exhaust is not based on the NO2-assisted mechanism but is most likely occurring by the active oxygen-based mechanism.

Catalytic performance of CuO/Ce0.8Zr0.2O2 loaded onto SiC-DPF in NOx-assisted combustion of diesel soot

This work presents a comparative study between the catalytic performance of the 2% CuO/ceria-zirconia powder catalyst and the same catalyst supported on silicon carbide DPF (Diesel Particulate Filter) towards NO oxidation reaction and soot combustion reaction. The ceria-zirconia catalyst was prepared by the co-precipitation method and 2 wt% copper was incorporated by the incipient wetness impregnation method. The catalyst was incorporated onto the ceramic support using a simple and organic solvent-free procedure by a simply dipping the DPF into an aqueous solution of the catalyst. The powder catalyst has been characterized using N2 adsorption at −196 °C, XRD and Raman Spectroscopy; whereas the catalytic coating morphology has been evaluated by SEM and the mechanical stability by an adherence test. Both catalyst configurations were tested for NO oxidation to NO2 and for soot combustion under NOx/O2. The results revealed that incorporation of the very active copper/ceria-zirconia catalyst onto SiC-DPF has been successfully achieved by a simple coating procedure. Furthermore, the catalytic coating has shown suitable mechanical, chemical and thermal stability. A satisfactory catalytic performance of the catalytic-coated filter was reached towards the NO oxidation reaction. Moreover, it was proved that the catalytic coating is stable and the corresponding coated DPF can be reused for several cycles of NO oxidation without a significant decrease in its activity. Finally, it was verified that the loose-contact mode is a good choice to simulate the catalytic performance of this active phase in a real diesel particulate filter.

Optimização de um sistema híbrido off-grid PV, Gerador Diesel e Baterias

Tese de mestrado integrado, Engenharia da Energia e do Ambiente, Universidade de Lisboa, Faculdade de Ciências, 2016

Benefici del long route EGR sulla riduzione dei consumi: studio di fattibilità su motore diesel automobilistico

L'EGR (Exhaust Gas Recirculation) è una tecnica comunemente sfruttata per la riduzione delle emissioni. In questo studio sono stati investigati i benefici, in termini di fuel economy, prodotti dall'aggiunta di un circuito EGR long route su un motore diesel per applicazioni automobilistiche dotato di sistema short route. L'indagine è stata svolta su di un modello motore su software GT-Power, adeguatamente calibrato e validato sui dati da piano quotato. Simulazioni sono state svolte al fine di valutare gli effetti del solo LP-EGR sul motore, per poi considerare un funzionamento combinato dai due sistemi di ricircolo (dual loop). Le maggiori portate che per il sistema long route interessano la turbina determinano un incremento nelle contropressioni. Ciò ha portato a considerare la possibilità di modificare il sistema turbo. Il layout originario comprendeva una turbina a geometria fissa (FGT), a cui ne sono stati affiancati due ulteriori con turbina a geometria variabile (VGT). I risultati sono stati analizzati vincolando la produzione di inquinanti ai valori registrati nei punti di calibrazione relativi al layout originale del motore. Effettivo risparmio di combustibile non è stato riscontrato nell'allestimento con turbina FGT a causa delle elevate contropressioni, mentre con turbine VGT è stata registrata una effettiva fuel economy grazie al sistema LP-EGR senza alcun deterioramento nelle emissioni di NOx e PM. I benefici riscontrati con il LP-EGR sono da attribure ad un incremento del rendimento indicato dovuto alla riduzione delle perdite per scambio termico a seguito di una minore temperatura caratterizzante i gas ricircolati.

Acoustical and emission characteristics of small, high-speed internal combustion engines. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Closed loop control of automotive engines. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

An initial assessment of the literature on the measurement, control, transport, transformation and health effects of urregulated diesel engine emissions /

Final report, January 1979.

Teratologic effects of long-term exposure to diesel exhaust emissions (rabbits) /

"Contract no. 68-03-2652."

Performance characteristics of automotive engines in the United States. First series--report no. 13. 1975 American Motors 258 CID (4.2 liters), 1V. Interim report.

Transportation Systems Center, Cambridge, Mass.