DEVELOPMENT OF THE ECOCAR 3 PROPOSAL AND GUIDELINES FOR MODELING AND DESIGN IN YEAR ONE OF ECOCAR 3

This report summarizes the work done for the Vehicle Powertrain Modeling and Design Problem Proposal portion of the EcoCAR3 proposal as specified in the Request for Proposal from Argonne National Laboratory. The results of the modeling exercises presented in the proposal showed that: An average conventional vehicle powered by a combustion engine could not meet the energy consumption target when the engine was sized to meet the acceleration target, due the relatively low thermal efficiency of the spark ignition engine. A battery electric vehicle could not meet the required range target of 320 km while keeping the vehicle weight below the gross vehicle weight rating of 2000 kg. This was due to the low energy density of the batteries which necessitated a large, and heavy, battery pack to provide enough energy to meet the range target. A series hybrid electric vehicle has the potential to meet the acceleration and energy consumption parameters when the components are optimally sized. A parallel hybrid electric vehicle has less energy conversion losses than a series hybrid electric vehicle which results in greater overall efficiency, lower energy consumption, and less emissions. For EcoCAR3, Michigan Tech proposes to develop a plug-in parallel hybrid vehicle (PPHEV) powered by a small Diesel engine operating on B20 Bio-Diesel fuel. This architecture was chosen over other options due to its compact design, lower cost, and its ability to provide performance levels and energy efficiency that meet or exceed the design targets. While this powertrain configuration requires a more complex control system and strategy than others, the student engineering team at Michigan Tech has significant recent experience with this architecture and has confidence that it will perform well in the events planned for the EcoCAR3 competition.

Proposal of Histophilus somni gen. nov., sp. nov. for the three species incertae sedis 'Haemophilus somnus', 'Haemophilus agni' and 'Histophilus ovis'

Earlier investigations have shown that 'Haemophilus somnus', 'Haemophilus agni' and 'Histophilus ovis' represent the same species. In the present investigation, the taxonomic position of this species is explored further by sequencing the 16S rRNA and rpoB genes of strains that were investigated previously by DNA-DNA hybridization. These results clearly support the allocation of this species to a novel genus within the family PASTEURELLACEAE: The phenotypic separation of Histophilus somni gen. nov., sp. nov. from other members of the family can, for most strains, be based on capnophilia, yellowish pigmentation and indole production. However, due to phenotypic variation, the use of a species-specific PCR test based on the 16S rRNA gene is included in the species description. This is justified by the high sequence similarity of the 16S rRNA gene within the species and the fact that the highest sequence similarity to any other taxon within the family is 93.4 %. The type strain, 8025(T)=ATCC 43625(T)=CCUG 36157(T), was isolated in the USA from a bovine brain with lesions of thromboembolic meningoencephalitis.

Is characterization of a single isolate sufficient for valid publication of a new genus or species? Proposal to modify recommendation 30b of the Bacteriological Code (1990 Revision)

From 1990 to 2000, the number of published named taxa based upon new isolates at species and genus levels in International Journal of Systematic and Evolutionary Microbiology, formerly International Journal of Systematic Bacteriology, have increased by approximately four- and sevenfold, respectively. New taxa based upon characterization of only a single isolate remained at around 40% for both categories. The Bacteriological Code (1990 Revision) has no recommendations on the number of strains required for definition of new taxa. For a few groups, a minimum number of 5-10 strains has been suggested in minimal standards. Since an exponential increase in new taxa can be expected in the future, the authors discuss problems related to naming new species and genera based upon descriptions of a single isolate and suggest that this practice is re-evaluated. It is proposed that the following should be added to Recommendation 30b of the Bacteriological Code: 'Descriptions should be based on as many strains as possible (minimum five), representing different sources with respect to geography and ecology in order to be well characterized both phenotypically and genotypically, to establish the centre (from which the type strain could be chosen) and the extent of the cluster to be named. In addition, comparative studies should be performed, including reference strains that represent neighbouring species and/or genera, in order to give descriptions that are sufficiently detailed to allow differentiation from these neighbours.'

Proposal of a new serovar of Actinobacillus pleuropneumoniae: serovar 15

We report on the re-examination of nine Australian isolates of Actinobacillus pleuropneumoniae that have been previously assigned to serovar 12. In the ring precipitation test, none of the nine isolates reacted with antisera to serovars 1-14 of A. pleuropneumoniae. Antiserum prepared against one of the Australian isolates gave no reaction with any of the 14 recognised serovar reference strains, except serovar 7. This reaction of the HS143 antiserum with serovar 7 antigen could be removed by adsorption with serovar 7 antigen. The adsorbed antiserum remained reactive with HS143 and the other eight Australian isolates. The nine Australian isolates were all shown to express ApxII and ApxIII, found in serovars 2, 4, 6 and 8, as well as the 42kDa outer membrane protein found in all serovars of A. pleuropneumoniae. The nine Australian isolates were found to possess the following toxin associated genes apxIBD, apxIICA, apxIIICA, apxIIIBD and apxIVA. The toxin gene profile of the Australian isolates is typical of A. pleuropneumoniae serovars 2, 4, 6 and 8. On the basis of the serological characterisation results and the toxin gene profiles, we propose that these isolates represent a new serovar of A. pleuropneumoniae--serovar 15--with HS143 being the reference strain for the new serovar.

Proposal for an International Molybdenum Isotope Measurement Standard and Data Representation

Molybdenum isotopes are increasingly widely applied in Earth Sciences. They are primarily used to investigate the oxygenation of Earth's ocean and atmosphere. However, more and more fields of application are being developed, such as magmatic and hydrothermal processes, planetary sciences or the tracking of environmental pollution. Here, we present a proposal for a unifying presentation of Mo isotope ratios in the studies of mass-dependent isotope fractionation. We suggest that the δ98/95Mo of the NIST SRM 3134 be defined as +0.25‰. The rationale is that the vast majority of published data are presented relative to reference materials that are similar, but not identical, and that are all slightly lighter than NIST SRM 3134. Our proposed data presentation allows a direct first-order comparison of almost all old data with future work while referring to an international measurement standard. In particular, canonical δ98/95Mo values such as +2.3‰ for seawater and −0.7‰ for marine Fe–Mn precipitates can be kept for discussion. As recent publications show that the ocean molybdenum isotope signature is homogeneous, the IAPSO ocean water standard or any other open ocean water sample is suggested as a secondary measurement standard, with a defined δ98/95Mo value of +2.34 ± 0.10‰ (2s). Les isotopes du molybdène (Mo) sont de plus en plus largement utilisés dans les sciences de la Terre. Ils sont principalement utilisés pour étudier l'oxygénation de l'océan et de l'atmosphère de la Terre. Cependant, de plus en plus de domaines d'application sont en cours de développement, tels que ceux concernant les processus magmatiques et hydrothermaux, les sciences planétaires ou encore le suivi de la pollution environnementale. Ici, nous présentons une proposition de présentation unifiée des rapports isotopiques du Mo dans les études du fractionnement isotopique dépendant de la masse. Nous suggérons que le δ98/95Mo du NIST SRM 3134 soit définit comme étant égal à +0.25 ‰. La raison est que la grande majorité des données publiées sont présentés par rapport à des matériaux de référence qui sont similaires, mais pas identiques, et qui sont tous légèrement plus léger que le NIST SRM 3134. Notre proposition de présentation des données permet une comparaison directe au premier ordre de presque toutes les anciennes données avec les travaux futurs en se référant à un standard international. En particulier, les valeurs canoniques du δ98/95Mo comme celle de +2,3 ‰ pour l'eau de mer et de -0,7 ‰ pour les précipités de Fe-Mn marins peuvent être conservés pour la discussion. Comme les publications récentes montrent que la signature isotopique moyenne du molybdène de l'océan est homogène, le standard de l'eau océanique IAPSO ou tout autre échantillon d'eau provenant de l'océan ouvert sont proposé comme standards secondaires, avec une valeur définie du δ98/95 Mo de 2.34 ± 0.10 ‰ (2s).

Multidisciplinary consensus on assessment of unruptured intracranial aneurysms: proposal of an international research group.

BACKGROUND AND PURPOSE To address the increasing need to counsel patients about treatment indications for unruptured intracranial aneurysms (UIA), we endeavored to develop a consensus on assessment of UIAs among a group of specialists from diverse fields involved in research and treatment of UIAs. METHODS After composition of the research group, a Delphi consensus was initiated to identify and rate all features, which may be relevant to assess UIAs and their treatment by using ranking scales and analysis of inter-rater agreement (IRA) for each factor. IRA was categorized as very high, high, moderate, or low. RESULTS Ultimately, 39 specialists from 4 specialties agreed (high or very high IRAs) on the following key factors for or against UIA treatment decisions: (1) patient age, life expectancy, and comorbid diseases; (2) previous subarachnoid hemorrhage from a different aneurysm, family history for UIA or subarachnoid hemorrhage, nicotine use; (3) UIA size, location, and lobulation; (4) UIA growth or de novo formation on serial imaging; (5) clinical symptoms (cranial nerve deficit, mass effect, and thromboembolic events from UIAs); and (6) risk factors for UIA treatment (patient age and life expectancy, UIA size, and estimated risk of treatment). However, IRAs for features rated with low relevance were also generally low, which underlined the existing controversy about the natural history of UIAs. CONCLUSIONS Our results highlight that neurovascular specialists currently consider many features as important when evaluating UIAs but also highlight that the appreciation of natural history of UIAs remains uncertain, even within a group of highly informed individuals.

Systematic analysis of the intravoxel incoherent motion threshold separating perfusion and diffusion effects: Proposal of a standardized algorithm

PURPOSE To systematically evaluate the dependence of intravoxel-incoherent-motion (IVIM) parameters on the b-value threshold separating the perfusion and diffusion compartment, and to implement and test an algorithm for the standardized computation of this threshold. METHODS Diffusion weighted images of the upper abdomen were acquired at 3 Tesla in eleven healthy male volunteers with 10 different b-values and in two healthy male volunteers with 16 different b-values. Region-of-interest IVIM analysis was applied to the abdominal organs and skeletal muscle with a systematic increase of the b-value threshold for computing pseudodiffusion D*, perfusion fraction Fp , diffusion coefficient D, and the sum of squared residuals to the bi-exponential IVIM-fit. RESULTS IVIM parameters strongly depended on the choice of the b-value threshold. The proposed algorithm successfully provided optimal b-value thresholds with the smallest residuals for all evaluated organs [s/mm2]: e.g., right liver lobe 20, spleen 20, right renal cortex 150, skeletal muscle 150. Mean D* [10(-3) mm(2) /s], Fp [%], and D [10(-3) mm(2) /s] values (±standard deviation) were: right liver lobe, 88.7 ± 42.5, 22.6 ± 7.4, 0.73 ± 0.12; right renal cortex: 11.5 ± 1.8, 18.3 ± 2.9, 1.68 ± 0.05; spleen: 41.9 ± 57.9, 8.2 ± 3.4, 0.69 ± 0.07; skeletal muscle: 21.7 ± 19.0; 7.4 ± 3.0; 1.36 ± 0.04. CONCLUSION IVIM parameters strongly depend upon the choice of the b-value threshold used for computation. The proposed algorithm may be used as a robust approach for IVIM analysis without organ-specific adaptation. Magn Reson Med, 2014. © 2014 Wiley Periodicals, Inc.

Tumour border configuration in colorectal cancer: proposal for an alternative scoring system based on the percentage of infiltrating margin.

AIMS Information on tumour border configuration (TBC) in colorectal cancer (CRC) is currently not included in most pathology reports, owing to lack of reproducibility and/or established evaluation systems. The aim of this study was to investigate whether an alternative scoring system based on the percentage of the infiltrating component may represent a reliable method for assessing TBC. METHODS AND RESULTS Two hundred and fifteen CRCs with complete clinicopathological data were evaluated by two independent observers, both 'traditionally' by assigning the tumours into pushing/infiltrating/mixed categories, and alternatively by scoring the percentage of infiltrating margin. With the pushing/infiltrating/mixed pattern method, interobserver agreement (IOA) was moderate (κ = 0.58), whereas with the percentage of infiltrating margins method, IOA was excellent (intraclass correlation coefficient of 0.86). A higher percentage of infiltrating margin correlated with adverse features such as higher grade (P = 0.0025), higher pT (P = 0.0007), pN (P = 0.0001) and pM classification (P = 0.0063), high-grade tumour budding (P < 0.0001), lymphatic invasion (P < 0.0001), vascular invasion (P = 0.0032), and shorter survival (P = 0.0008), and was significantly associated with an increased probability of lymph node metastasis (P < 0.001). CONCLUSIONS Information on TBC gives additional prognostic value to pathology reports on CRC. The novel proposed scoring system, by using the percentage of infiltrating margin, outperforms the 'traditional' way of reporting TBC. Additionally, it is reproducible and simple to apply, and can therefore be easily integrated into daily diagnostic practice.

Soft tissue grafting to improve the attached mucosa at dental implants: A review of the literature and proposal of a decision tree.

BACKGROUND Scientific data and clinical observations appear to indicate that an adequate width of attached mucosa may facilitate oral hygiene procedures thus preventing peri-implant inflammation and tissue breakdown (eg, biologic complications). Consequently, in order to avoid biologic complications and improve long-term prognosis, soft tissue conditions should be carefully evaluated when implant therapy is planned. At present the necessity and time-point for soft tissue grafting (eg, prior to or during implant placement or after healing) is still controversially discussed while clinical recommendations are vague. OBJECTIVES To provide a review of the literature on the role of attached mucosa to maintain periimplant health, and to propose a decision tree which may help the clinician to select the appropriate surgical technique for increasing the width of attached mucosa. RESULTS The available data indicate that ideally, soft tissue conditions should be optimized by various grafting procedures either before or during implant placement or as part of stage-two surgery. In cases, where, despite insufficient peri-implant soft tissue condition (ie, lack of attached mucosa or movements caused by buccal frena), implants have been uncovered and/or loaded, or in cases where biologic complications are already present (eg, mucositis, peri-implantitis), the treatment appears to be more difficult and less predictable. CONCLUSION Soft tissue grafting may be important to prevent peri-implant tissue breakdown and should be considered when dental implants are placed. The presented decision tree may help the clinician to select the appropriate grafting technique.