Behavior of Brick-Mortar Interfaces in FRP-Strengthened Masonry Assemblages under Normal Loading and Shear Loading

Determination of shear strength of brick-mortar bed joint is critical to overcome the sliding-shear or joint-shear failure in masonry. In the recent past, researchers have attempted to enhance the shear strength and deformation capacity of brick-mortar bed joints by gluing fiber-reinforced polymer (FRP) composite across the bed joint. FRP composites offer several advantages like high strength-to-weight ratio, and ease of application in terms of labor, time, and reduced curing period. Furthermore, FRP composites are desirable for strengthening old masonry buildings having heritage value because of its minimal interference with the existing architecture. A majority of earlier studies on shear strengthening of masonry available in the literature adopted masonry having the ratio of modulus of elasticity of masonry unit (Emu) to modulus of elasticity of mortar (Em) greater than one. Information related to shear behavior of FRP glued masonry composed of masonry units having Young's modulus lower than mortar is limited. Hence the present study is focused on characterizing the interfacial behavior of brick-mortar bed joint of masonry assemblages composed of solid burnt clay bricks and cement-sand mortar (E-mu/E-m ratio less than one), strengthened with FRP composites. Masonry triplets and prisms with bed joint inclined to loading axis (0 degrees, 30 degrees, 45 degrees, 60 degrees and 90 degrees) are employed in this study. Glass and carbon FRP composites composed of bidirectional FRP fabric with equal density in both directions are used for strengthening masonry. Masonry triplets are glued with glass and carbon FRP composites in two configurations: (1) both faces of the triplet specimens are fully glued with GFRP composites; and (2) both faces of the triplet specimens are glued with GFRP and CFRP composites in strip form. The performance of masonry assemblages strengthened with FRP composites is assessed in terms of gain in shear strength, shear displacement, and postpeak behavior for various configurations and types of FRP composites considered. A semianalytical model is proposed for the prediction of shear strength of masonry bed joints glued with FRP composites. A composite failure envelope consisting of a Coulomb friction model and a compression cap is obtained for unreinforced masonry and GFRP-strengthened masonry based on the test results of masonry triplets and masonry prisms with bed joints having various inclinations to the loading (C) 2015 American Society of Civil Engineers.

Numerical analysis of segmented-electrode Orbitraps

Simple geometries which are possible alternatives for the Orbitrap are studied in this paper. We have taken up for numerical investigation two segmented-electrode structures, ORB1 and ORB2, to mimic the electric field of the Orbitrap. In the ORB1, the inner spindle-like electrode and the outer barrel-like electrode of the Orbitrap have been replaced by 35 rings and 35 discs of fixed radii, respectively. In this structure two segmented end cap electrodes have been added. In this geometry, different potentials are applied to the different electrodes keeping top-bottom symmetry intact. In the second geometry, ORB2, the inner and outer electrodes of the Orbitrap were replaced by an approximate step structure which follows the profile of the Orbitrap electrodes. In the present study 45 steps have been used. In the ORB2, like the Orbitrap, the inner electrode is held at a negative potential and the outer electrode is at ground potential. For the purpose of comparing the performance of ORB1 and ORB2 with that of the Orbitrap, the following studies have been undertaken: (1) variation of electric potential, (2) computation of ion trajectories, (3) simulation of image currents. These studies have been carried out using both 2D and 3D Boundary Element Method (BEM), the 3D BEM was developed specifically for this study. It has been seen in these investigations that ORB1 and ORB2 have performance similar to that of the Orbitrap, with the performance of the ORB1 being seen to be marginally superior to that of the ORB2. It has been shown that with proper optimization, geometries containing far fewer electrodes can be used as mass analyzers. A novel technique of optimization of the electric field has been proposed with the objective of minimizing the dependence of axial frequency of ion motion on the initial position of an ion. The results on the optimization of 9 and 15 segmented-electrode traps having the same design as ORB1 show that it can provide accurate mass analysis. (C) 2015 Elsevier B.V. All rights reserved.

Numerical analysis of segmented-electrode Orbitraps

Simple geometries which are possible alternatives for the Orbitrap are studied in this paper. We have taken up for numerical investigation two segmented-electrode structures, ORB1 and ORB2, to mimic the electric field of the Orbitrap. In the ORB1, the inner spindle-like electrode and the outer barrel-like electrode of the Orbitrap have been replaced by 35 rings and 35 discs of fixed radii, respectively. In this structure two segmented end cap electrodes have been added. In this geometry, different potentials are applied to the different electrodes keeping top-bottom symmetry intact. In the second geometry, ORB2, the inner and outer electrodes of the Orbitrap were replaced by an approximate step structure which follows the profile of the Orbitrap electrodes. In the present study 45 steps have been used. In the ORB2, like the Orbitrap, the inner electrode is held at a negative potential and the outer electrode is at ground potential. For the purpose of comparing the performance of ORB1 and ORB2 with that of the Orbitrap, the following studies have been undertaken: (1) variation of electric potential, (2) computation of ion trajectories, (3) simulation of image currents. These studies have been carried out using both 2D and 3D Boundary Element Method (BEM), the 3D BEM was developed specifically for this study. It has been seen in these investigations that ORB1 and ORB2 have performance similar to that of the Orbitrap, with the performance of the ORB1 being seen to be marginally superior to that of the ORB2. It has been shown that with proper optimization, geometries containing far fewer electrodes can be used as mass analyzers. A novel technique of optimization of the electric field has been proposed with the objective of minimizing the dependence of axial frequency of ion motion on the initial position of an ion. The results on the optimization of 9 and 15 segmented-electrode traps having the same design as ORB1 show that it can provide accurate mass analysis. (C) 2015 Elsevier B.V. All rights reserved.

Efecto de la inclusión de saccharina sobre el comportamiento productivo de cerdos de engorde

El presente trabajo experimental se realizó con el objetivo de evaluar el efecto de inclusión de dos niveles de Saccharina sobre los rendimientos productivos: Ganancia Media Diaria (GMD.); Consumo de Alimento Promedio (CAP); Conversión Alimenticia (CA) en cerdos de engorde, evaluándose la utilidad económica de los tratamientos. Se utilizaron tres tratamientos. T1: testigo; T2: 7.38 % de Saccharina y T3 : 14.76 % de Saccharina, los que estaban conformados por grupos de siete cerdos cada uno, con edades y pesos promedios de 120 días y 34.55 Kg. El análisis estadístico empleado fué un Diseño Completamente Aleatorio (DCA), para las variables GMD/Tratamiento y C.A/Tratamiento. Se obtuvieron ganancias medias diarias de T1: 750.48; T2 : 893.34; T3 : 774.29 gr/días/cerdos respectivamente. Resultando no significativa al Pr≤ O.05 para los tres tratamientos. Con la realización del análisis de costo de alimento por Kg de ganancia de peso se obtuvieron los valores de C$ 5.13 (T1); C$ 4.62 (T2); C$ 4.48 (T3) respectivamente. Al realizarse el presupuesto parcial se determinó que el tratamiento que obtuvo la mayor utilidad fue el tratamiento dos (T2) resultando de C$ 57.77 siendo para el tratamiento tres (T3 ) la utilidad de C$ 12.27 ambos tratamientos con respecto al tratamiento uno (T1). Por tanto, el tratamiento T2 es el que genera las beneficios económicos.

Instability Of Plane Poiseuille Flow In A Fluid-Porous System

The instability of Poiseuille flow in a fluid-porous system is investigated. The system consists of a fluid layer overlying porous media and is subjected to a horizontal plane Poiseuille flow. We use Brinkman's model instead of Darcy's law to describe the porous layer. The eigenvalue problem is solved by means of a Chebyshev collocation method. We study the influence of the depth ratio (d) over cap and the Darcy number delta on the instability of the system. We compare systematically the instability of Brinkman's model with the results of Darcy's model. Our results show that no satisfactory agreement between Brinkman's model and Darcy's model is obtained for the instability of a fluid-porous system. We also examine the instability of Darcy's model. A particular comparison with early work is made. We find that a multivalued region may present in the (k, Re) plane, which was neglected in previous work. Here k is the dimensionless wavenumber and Re is the Reynolds number. (C) 2008 American Institute of Physics. [DOI: 10.1063/1.3000643]

Evaluación del rendimiento y almacenamiento de catorce cultivares de cebolla (Allium cepa L.) en el Valle de Sébaco

Con el propósito de evaluar el rendimiento y la capacidad de almacenamiento de catorce cultivares de cebolla (Allium Cap L.), se realizó un ensayo en el Centro experimental “Raúl González A”, del valle de Sebaco durante el periodo Diciembre 1987 a Julio 1,988 El método de siembra utilizado fue el de trasplante: el diseño experimental utilizado fue el de bloques completos al azar con 4 repeticiones y parcela experimental de 6 mts. De largo y 1.6 mts de Ancho. El área de la parcela útil fue de 5.4 mts2. Los paramentos evaluados fueron los siguientes: longitud de planta, numero de hojas, diámetro polar y ecuatorial, grados Srix porcentaje de plantas sin bulbo, porcentaje de bulbos dobles, porcentaje de bulbos enfermos y el rendimiento. En almacenamiento se evaluó el porcentaje de bulbos comerciales al final del almacenamiento. En base al ANDEVA y la prueba de Tukey al 5% de determino que las variedades Toro PRR ( 20.262 kg/ha), Grand prix (18.194 kg/ha) y Ringer Grano PRR (17.898) superan en rendimiento al resto de las variedades: Los materiales se sabe que no presentan los rendimientos más pobres, aunque se destaca el hecho de que los materiales mejorados superan al material original. En el almacenamiento mostrado un mejor comportamiento las variedades Yellow Granex y Red Creole con 80% de bulbos comerciales al final del periodo de almacenamiento.

Market Power in the Spanish Electricity Auction

Published as an article in: Journal of Regulatory Economics, 2010, vol. 37, issue 1, pages 42-69.

海底管线地基土体塑性及剪切破坏分析

提出一种分析管线地基极限承载力的平面应变有限元模拟方法,采用自适应网格技术和接触对算法模拟管线嵌入土体的准静态过程,利用修正Drucker-Prager/Cap本构模型模拟土体塑性。研究不同土性和管土界面摩擦条件下,管线地基土体的塑性变形及位移场特性。利用载荷沉降曲线并结合地基塑性应变分布图和位移矢量图,可判别管线地基的剪切破坏型式、确定地基极限承载力。

Lengua y derecho a la educación en la Comunidad Autónoma del País Vasco : reflexiones jurídicas sobre el tránsito hacia un nuevo modelo

The article analyzes the legal regime of Euskara in the education system of the Autonomous Community of the Basque Country (capv). In the capv, the legislation recognizes the right to choose the language of study during the educational cycle. The students are separated into different classrooms based on their language preference. This system of separation (of language models) has made it possible to make great strides, although its implementation also suggests aspects which, from the perspective of a pluralistic Basque society on its way towards greater social, political and language integration, call for further reflection The general model for language planning in the capv was fashioned in the eighties as a model characterized by the guarantee of spaces of language freedom, and the educational system was charged with making the learning of the region’s autochthonous language more widespread. At this point, we already have a fair degree of evidence on which to base an analysis of the system of language models and we are in a position to conclude that perhaps the educational system was given too heavy a burden. Official studies on language performance of Basque schoolchildren show (in a way that is now fully verified) that not all the students who finish their mandatory period of schooling achieve the level of knowledge of Euskara required by the regulations. When faced with this reality, it becomes necessary for us to articulate some alternative to the current configuration of the system of language models, one that will make it possible in the future to have a Basque society that is linguistically more integrated, thereby avoiding having the knowledge or lack of knowledge of one of the official languages become a language barrier between two communities. Many sides have urged a reconsideration of the system of language models. The Basque Parliament itself has requested the Department of Education to design a new system. This article analyzes the legal foundations on which the current system is built and explores the potential avenues for legal cooperation that would make it possible to move towards a new system aimed at guaranteeing higher rates of bilingualism. The system would be sufficiently flexible so as to be able to respond to and accommodate the different sociolinguistic realities of the region.

Régimen jurídico de las lenguas y reconocimiento de la diversidad lingüística en el Tratado por el que se establece una Constitución para Europa

The territory of the European Union is made up of a rich and wide-ranging universe of languages, which is not circumscribed to the «State languages». The existence of multilingualism is one of Europe’s defining characteristics and it should remain so in the constantly evolving model of Europe’s political structure. Nonetheless, until now, the official use of languages has been limited to the «State languages» and has been based on a concept of state monolingualism that has led to a first level of hierarchization among the languages of Europe. This has affected the very concept of European language diversity. The draft of the treaty establishing a European Constitution contains various language-related references that can be grouped in two major categories: on the one hand, those references having to do the constitutional status of languages, and on the other, those regarding the recognition of European language diversity. Both issues are dealt with in this article. In analyzing the legal regime governing languages set forth in the draft of the constitutional treaty, we note that the draft is not based on the concept of the official status of languages. The language regulation contained in the draft of the constitutional treaty is limited in character. The constitutional language regime is based on the concept of Constitutional languages but the official status of languages is not governed by this rule. The European Constitution merely enunciates rights governing language use for European citizens vis-à-vis the languages of the Constitution and refers the regulation of the official status of languages to the Council, which is empowered to set and modify that status by unanimous decision. Because of its broad scope, this constitutes a regulatory reservation. In the final phase of the negotiation process a second level of constitutional recognition of languages would be introduced, linked to those that are official languages in the member states (Catalan, Basque, Galician, etc.). These languages, however, would be excluded from the right to petition; they would constitute a tertium genus, an intermediate category between the lan guages benefiting from the language rights recognized under the Constitution and those other languages for which no status is recognized in the European institutional context. The legal functionality of this second, intermediate category will depend on the development of standards, i.e., it will depend on the entrée provided such languages in future reforms of the institutional language regime. In a later section, the article reflects on European Union language policy with regard to regional or minority languages, concluding that the Union has not acted in accordance with defined language policy guidelines when it has been confronted, in the exercise of its powers, with regional or minority languages (or domestic legislation having to do with language demands). The Court of Justice has endeavoured to resolve on a case by case basis the conflicts raised between community freedoms and the normative measures that protect languages. Thus, using case law, the Court has set certain language boundaries for community freedoms. The article concludes by reflecting on the legal scope of the recognition of European language diversity referred to in Article II-82 of the European Constitution and the possible measures to implement the precept that might constitute the definition of a true European language policy on regional or minority languages. Such a policy has yet to be defined.

Apuntes jurídicos sobre el paisaje lingüístico en Euskal Herria

This paper is a study of place-names and signs in the Basque Country from the point of view of language law. These are matters that relate to both the status and corpus of language and contribute to the formation of the language landscape,» After a brief historical introduction, the author focuses on the factors that bear on signs and the language 1andscape: the cornpetence factor and the language factor. The description of the latter leads the author to a discussion of the existing language system, in which the Spanish and Basque sharing official status does not necessarily entail the obligation to use both languages at the same time. Using this discussion as a frame of reference, the au- thor analyses place-names, traffic signals and signs. As for place-names, the existing rules are deemed rigid and lacking in ambition, in that they do not pursue the dissemination of official Basque forms. In traffic signaIs, Basque has to appear alongside Spanish, which is required by Spanish legislation, although this bilingualism excludes place-names that have an official Basque form only. With regard to signs, the author analyses public premises, companies licensed to provide public services and the private sector. For public premises there is no specific regulation, but the status of Basque as an autochthonous language, together with the identification and informatíon purposes of signs, could support the exclusive use of this language, According to the author , companies licensed to provide public services should observe the same language system as the goverment and therefore promote the use of Basque. Finally, in the private sector, the author upholds the legitimacy of measures to promote Basque language use such as tax allowances and exemptions in advertising and commercial signs.

Guidance for benthic habitat mapping: an aerial photographic approach

This document, Guidance for Benthic Habitat Mapping: An Aerial Photographic Approach, describes proven technology that can be applied in an operational manner by state-level scientists and resource managers. This information is based on the experience gained by NOAA Coastal Services Center staff and state-level cooperators in the production of a series of benthic habitat data sets in Delaware, Florida, Maine, Massachusetts, New York, Rhode Island, the Virgin Islands, and Washington, as well as during Center-sponsored workshops on coral remote sensing and seagrass and aquatic habitat assessment. (PDF contains 39 pages) The original benthic habitat document, NOAA Coastal Change Analysis Program (C-CAP): Guidance for Regional Implementation (Dobson et al.), was published by the Department of Commerce in 1995. That document summarized procedures that were to be used by scientists throughout the United States to develop consistent and reliable coastal land cover and benthic habitat information. Advances in technology and new methodologies for generating these data created the need for this updated report, which builds upon the foundation of its predecessor.

Cost effectiveness of a combination of instruments for global warming: a quantitative approach for Spain

Climate change is an important environmental problem and one whose economic implications are many and varied. This paper starts with the presumption that mitigation of greenhouse gases is a necessary policy that has to be designed in a cost effective way. It is well known that market instruments are the best option for cost effectiveness. But the discussion regarding which of the various market instruments should be used, how they may interact and what combinations of policies should be implemented is still open and very lively. In this paper we propose a combination of instruments: the marketable emission permits already in place in Europe for major economic sectors and a CO(2) tax for economic sectors not included in the emissions permit scheme. The study uses an applied general equilibrium model for the Spanish economy to compute the results obtained with the new mix of instruments proposed. As the combination of the market for emission permits and the CO(2) tax admits different possibilities that depend on how the mitigation is distributed among the economic sectors, we concentrate on four possibilities: cost-effective, equalitarian, proportional to emissions, and proportional to output distributions. Other alternatives to the CO(2) tax are also analysed (tax on energy, on oil and on electricity). Our findings suggest that careful, well designed policies are needed as any deviation imposes significant additional costs that increase more than proportionally to the level of emissions reduction targeted by the EU.

Embryonic development in Clarias gariepinus under laboratory conditions

The embryonic development in Clarias gariepinus was studied under laboratory conditions. The developmental stages of eggs starting from first cleavage were examined microscopically. Photomicroscope was used to take important stages of segmentation, blastulation, differentiation of embryo and hatching. The films of the photograph were developed and printed for each stage produced. The accurate timing and detailed description of each stage was done. The results show that the blastodisc (Polar cap) appeared about 35 minutes after fertilization and the first cleavage dividing the blastodisc into two blastomeres occurs 15 minutes after polar cap formation. Details of the developmental stages of embryos and the timing from one stage to the other were described. The larva shook off the shell and emerged completely from the egg case about 22 hours after fertilization at a water temperature of 25.1 degree C. The accurate determination of the time of initiation of first mitosis is of great importance in fish culture and breeding especially in the production of tetraploids

Essays in mechanism design

This dissertation contains three essays on mechanism design. The common goal of these essays is to assist in the solution of different resource allocation problems where asymmetric information creates obstacles to the efficient allocation of resources. In each essay, we present a mechanism that satisfactorily solves the resource allocation problem and study some of its properties. In our first essay, ”Combinatorial Assignment under Dichotomous Preferences”, we present a class of problems akin to time scheduling without a pre-existing time grid, and propose a mechanism that is efficient, strategy-proof and envy-free. Our second essay, ”Monitoring Costs and the Management of Common-Pool Resources”, studies what can happen to an existing mechanism — the individual tradable quotas (ITQ) mechanism, also known as the cap-and-trade mechanism — when quota enforcement is imperfect and costly. Our third essay, ”Vessel Buyback”, coauthored with John O. Ledyard, presents an auction design that can be used to buy back excess capital in overcapitalized industries.