FRENKEL-KONTOROVA DOMAIN-WALL PHASE-TRANSITIONS IN AN ADSORBED LAYER - POTASSIUM ON CO(10(1)OVER-BAR-0)

As the potassium fractional coverage of a cobalt {1010BAR} surface is increased over the range 0.2 to 0.6 monolayer the adlayer passes through a series of phase transitions. A commensurate phase is formed at exactly 0.5 monolayer, and corresponds to adatoms bonded in high-symmetry hollow sites on the unreconstructed cobalt surface, with an effective adatom radius lying between the ionic and covalent radii of potassium. A detailed structural study shows that the structural transitions can be characterised within a one-dimensional Frenkel-Kontorova model, with small lateral displacements of adatoms away from hollow sites in the low and high coverage phases. The low coverage phases progress from a distributed vacancy structure to a low density domain-wall structure; while the high coverage phase formed above half a monolayer is a high density asymmetric domain-wall structure.

THE SURFACE-STRUCTURE OF A C(2 X-2) POTASSIUM OVERLAYER ON CO(1010)

The surface structure of the clean Co{1010BAR} surface and a c(2 x 2) potassium overlayer have been determined by quantitative low energy electron diffraction. The Co{1010BAR} sample has been shown to be laterally unreconstructed with the surface being uniquely terminated by an outermost closely packed double layer (dz12 = 0.68 angstrom). A damped oscillatory relaxation of the outermost three atomic layers occurs, with relaxations DELTA-dz12 = -6.5 +/- 2% and DELTA-dz23 = +1.0 +/- 2%.

The c(2 x 2) overlayer formed at a coverage of 0.5 ML was subjected to a full I-V analysis. A range of adsorption sites were tested including fourfold hollow, on-top, and both long and short bridge sites in combination with both "long" and "short" cobalt interlayer terminations. A clear preference was found for adsorption in the maximal coordination fourfold hollow site. No switching of surface termination occurs. The potassium adatoms reside in the [1210BAR] surface channels directly above second layer cobalt atoms with a potassium to outermost cobalt interlayer separation of 2.44 +/- 0.05 angstrom. Potassium-cobalt bond lengths of 3.40 +/- 0.05 and 3.12 +/- 0.05 angstrom between the four (one) outermost (second) layer nearest-neighbour substrate atoms suggests a potassium effective radius of 1.87 +/- 0.05 angstrom, somewhat smaller than the Pauling covalent radius and considerably larger than the ionic radius (1.38 angstrom). The alkali-surface bonding is thus predominantly "covalent"/"metallic".

Direct oxidation of amines to nitriles in the presence of ruthenium-terpyridyl complex immobilized on ILs/SILP

The immobilization of a ruthenium complex (Ru2Cl4(az-tpy)2) within a range of supported ionic liquids ([C4C1im]Cl, [C4C1im][NTf2], [C6C1im]Cl, [C4C1pyrr]Br, [C4C1im]Br, [C4C1pyrr]Cl) dispersed silica (SILP) operates as an efficient heterogeneous catalyst in oxidation of long chain linear primary amines to corresponding nitriles. This reaction follows a “green” route using a cheap and easy to handles oxidant (oxygen or air). The conversion was found to be strongly influenced by the alkyl chain length of the amine substrate and the choice of oxidant. No condensation reaction was observed between the starting amines and the selectivity to nitrile is 100%. Moving from a composition of 20 atm N2/5 atm O2 to 5 atm N2/20 atm O2 led to enhancements in the conversion (n-alkylamines) and selectivity (benzonitrile) which have been correlated with an increase of the solubilized oxygen. This was further supported by using different inert gas (nitrogen, helium, argon)/oxygen mixtures indicating that the O2 solubility in the SILP system, has an important effect on conversions and TON in this reaction using SILP catalysts. Experiments performed in the presence of CO2 led to a different behaviour due to the formation of amine-CO2 adducts. The application of the Weisz–Prater criterion confirmed the absence of any diffusional constraints.

Bacteria microarrays as sensitive tools for exploring pathogen surface epitopes and recognition by host receptors

We describe a protocol for the generation and validation of bacteria microarrays and their application to the study of specific features of the pathogen's surface and interactions with host receptors. Bacteria were directly printed on nitrocellulose-coated glass slides, using either manual or robotic arrayers, and printing quality, immobilization efficiency and stability of the arrays were rigorously controlled by incorporating a fluorescent dye into the bacteria. A panel of wild type and mutant strains of the human pathogen Klebsiella pneumoniae, responsible for nosocomial and community-acquired infections, was selected as model bacteria, and SYTO-13 was used as dye. Fluorescence signals of the printed bacteria were found to exhibit a linear concentration-dependence in the range of 1 x 10(8) to 1 x 10(9) bacteria per ml. Similar results were obtained with Pseudomonas aeruginosa and Acinetobacter baumannii, two other human pathogens. Successful validation of the quality and applicability of the established microarrays was accomplished by testing the capacity of the bacteria array to detect recognition by anti-Klebsiella antibodies and by the complement subcomponent C1q, which binds K. pneumoniae in an antibody-independent manner. The biotin/AlexaFluor-647-streptavidin system was used for monitoring binding, yielding strain-and dose-dependent signals, distinctive for each protein. Furthermore, the potential of the bacteria microarray for investigating specific features, e.g. glycosylation patterns, of the cell surface was confirmed by examining the binding behaviour of a panel of plant lectins with diverse carbohydrate-binding specificities. This and other possible applications of the newly developed arrays, as e.g. screening/evaluation of compounds to identify inhibitors of host-pathogen interactions, make bacteria microarrays a useful and sensitive tool for both basic and applied research in microbiology, biomedicine and biotechnology.

Regenerated cellulose matrix-encapsulated active substances and method therefor.

The process involves encapsulation or immobilization of the active solid substance in a cellulose framework by regenerating cellulose dissolved in an ionic liq. solvent in a regenerating soln. The active substance can be initially present in the ionic liq. or in the regenerating solvent either as a soln. or dispersion. The invention is applicable to mol. encapsulation and to entrapping of larger particles including enzymes, nanoparticles and macroscopic components, and to the formation of bulk materials with a wide range of morphol. forms. Thus, carbamoylmethylphosphine oxide (I) encapsulated in a cellulose matrix was realized by adding I to a 10% soln. of cellulose in 1-butyl-3-methylimidazolium chloride (ionic liq.) under vigorous stirring and then removing the ionic liq. with water. [on SciFinder(R)]

Active site labeling of cysteine cathepsins by a straightforward diazomethylketone probe derived from the N-terminus of human cystatin C

We designed a straightforward biotinylated probe using the N-terminal substrate-like region of the inhibitory site of human cystatin C as a scaffold, linked to the thiol-specific reagent diazomethylketone group as a covalent warhead (i.e. Biot-(PEG)2-Ahx-LeuValGly-DMK). The irreversible activity-based probe bound readily to cysteine cathepsins B, L, S and K. Moreover affinity labeling is sensitive since active cathepsins were detected in the nM range using an ExtrAvidin®-peroxidase conjugate for disclosure. Biot-(PEG)2-Ahx-LeuValGly-DMK allowed a slightly more pronounced labeling for cathepsin S with a compelling second-order rate constant for association (kass = 2,320,000 M−1 s−1). Labeling of the active site is dose-dependent as observed using 6-cyclohexylamine-4-piperazinyl-1,3,5-triazine-2-carbonitrile, as competitive inhibitor of cathepsins. Finally we showed that Biot-(PEG)2-Ahx-LeuValGly-DMK may be a simple and convenient tool to label secreted and intracellular active cathepsins using a myelomonocytic cell line (THP-1 cells) as model.

Lanthanide luminescent logic gate mimics in soft matter: [H(+)] and [F(-)] dual-input device in a polymer gel with potential for selective component release

The non-covalent incorporation of responsive luminescent lanthanide, Ln(iii), complexes with orthogonal outputs from Eu(iii) and Tb(iii) in a gel matrix allows for in situ logic operation with colorimetric outputs. Herein, we report an exemplar system with two inputs ([H(+)] and [F(-)]) within a p(HEMA-co-MMA) polymer organogel acting as a dual-responsive device and identify future potential for such systems.

Simultaneous cellulose conversion and hydrogen production assisted by cellulose decomposition under UV-light photocatalysis

Photocatalytic conversion of cellulose to sugars and carbon dioxide with simultaneous production of hydrogen assisted by cellulose decomposition under UV or solar light irradiation was achieved upon immobilization of cellulose onto a TiO2 photocatalyst. This approach enables production of hydrogen from water without using valuable sacrificial agents, and provides the possibility for recovering sugars as liquid fuels.

Detection of Tetrodotoxins in Puffer Fish by a Self-Assembled Monolayer-Based Immunoassay and Comparison with Surface Plasmon Resonance, LC-MS/MS, and Mouse Bioassay

The increasing occurrence of puffer fish containing tetrodotoxin (TTX) in the Mediterranean could represent a major food safety risk for European consumers and threaten the fishing industry. The work presented herein describes the development of a new enzyme linked immunosorbent assay (mELISA) based on the immobilization of TTX through dithiol monolayers self-assembled on maleimide plates, which provides an ordered and oriented antigen immobilization and favors the antigen-antibody affinity interaction. The mELISA was found to have a limit of detection (LOD) of TTX of 0.23 mg/kg of puffer fish matrix. The mELISA and a surface plasmon resonance (SPR) immunosensor previously developed were employed to establish the cross-reactivity factors (CRFs) of 5,6,11-trideoxy-TTX, 5,11-deoxy-TTX, 11-nor-TTX-6-ol, and 5,6,11-trideoxy-4-anhydro-TTX, as well as to determine TTX equivalent contents in puffer fish samples. Results obtained by both immunochemical tools were correlated (R(2) = 0.977). The puffer fish samples were also analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS), and the corresponding CRFs were applied to the individual TTX contents. Results provided by the immunochemical tools, when compared with those obtained by LC-MS/MS, showed a good degree of correlation (R(2) = 0.991 and 0.979 for mELISA and SPR, respectively). The mouse bioassay (MBA) slightly overestimated the CRF adjusted TTX content of samples when compared with the data obtained from the other techniques. The mELISA has been demonstrated to be fit for the purpose for screening samples in monitoring programs and in research activities.

Argilas aniónicas multifuncionais

O presente trabalho aborda a imobilização de vários complexos do tipo dioxomolibdénio(VI), dioxotungsténio(VI) e de cobre(II) em suportes do tipo hidróxidos duplos lamelares (LDHs). Numa primeira parte descrevem-se os suportes LDHs e a síntese e caracterização em solução e estado sólido de complexos catecolato cis-MoO2 e cis-WO2. Investigou-se depois a química de intercalação deste tipo de complexos, nomeadamente a influência dos LDHs percursores, temperatura de intercalação, excesso de anião e mudança de metal no complexo intercalado (M=Mo, W). De seguida foi estudada a imobilização de oxocomplexos de molibdénio(VI) num LDH com pilares de bipiridina dicarboxilato e procedeu-se à avaliação da sua aplicabilidade em reacções catalíticas de oxidação de álcoois e olefinas. Com o objectivo de desenvolver as aplicações dos LDHs com pilares foi estudada a imobilização de um complexo de cobre(II) neste material e avaliada a sua aplicação como catalizador na oxidação de substratos orgânicos.

Novel microporous silicates and mesoporous MCM materials derivatised with inorganic and organometallic complexes

Os materiais microporosos e mesoporosos são potenciais catalisadores heterogéneos. Os zeólitos e outros materiais microporosos do tipo zeolítico tradicionais, têm átomos tetracoordenados no esqueleto. Nos últimos anos, um vasto número de titanossilicatos contendo Ti(IV) hexacoordenado e Si(IV) tetracoordenado, com estruturas tridimensionais, têm sido alvo de grande interesse. Um dos objectivos desta tese foi preparar silicatos microporosos, contendo átomos metálicos com número de coordenação superior a quatro, e possuindo quer novas estruturas quer propriedades físicas e químicas interessantes. Neste contexto, foi preparado um novo ítriossilicato de sódio, AV-1, análogo do raro mineral montregianite, Na4K2Y2Si16O38·10H2O. Este material é o primeiro sólido microporoso que contem quantidades estequiométricas de sódio (e ítrio) no esqueleto. Foi, também, sintetizado um silicato de cério, AV-5, análogo estrutural do mineral montregianite com potencial aplicação em optoelectrónica. Nesta tese é, ainda, descrita a síntese e caracterização estrutural de um silicato de cálcio hidratado, AV-2, análogo do raro mineral rhodesite (K2Ca4Na2Si16O38.12H2O). Na continuação do trabalho desenvolvido em Aveiro na síntese de novos titanossilicatos surgiu o interesse de preparar novos zirconossilicatos microporosos por síntese hidrotérmica. Foram preparados dois novos materiais análogos dos minerais petarasite Na5Zr2Si3O18(Cl,OH)·2H2O (AV-3) e kostylevite, K2Si3O9·H2O (AV-8). Foram, também, obtidos análogos sintéticos dos minerais parakeldyshite e wadeite, por calcinação a alta temperatura de AV-3 e de umbite sintética. A heterogeneização de complexos organometálicos na superfície de materiais mesoporosos do tipo M41S permite associar a grande actividade catalítica e a presença de sítios activos localizados típicos dos complexos organometálicos, com a robustez e fácil separação, características dos materiais mesoporosos siliciosos. Nesta dissertação relata-se a derivatização dos materiais MCM-41 e MCM-48 através da reacção de [SiMe2{(h5-C5H4)2}]Fe e [SiMe2{(h5-C5H4)2}]TiCl2 com os grupos silanol das superfícies mesoporosas. Os materiais MCMs derivatizados com ansa-titanoceno foram testados na epoxidação de cicloocteno a 323 K na presença de hidrogenoperóxido de t-butilo. Estudou-se a heterogeneização dos sais de complexos com ligação metal-metal [Mo2(MeCN)10][BF4]4, [Mo2(m-O2CMe)2(MeCN)6][BF4]2 e [Mo2(m- O2CMe)2(dppa)2(MeCN)2][BF4]2 via imobilização nos canais do MCM-41. A imobilização dos catalisadores homogéneos na superfície do MCM-41 envolve a saída dos ligandos nitrilo lábeis, preferencialmente em posição axial, através da reacção com os grupos Si-OH da sílica. Verificou-se que a ligação Mo-Mo se mantém intacta nos produtos finais. É provável que estes materiais sejam eficientes catalisadores heterogéneos em reacções de polimerização. As técnicas de caracterização utilizadas nesta tese foram a difracção de raios-X de pós, a microscopia electrónica de varrimento, a espectroscopia de ressonância magnética nuclear do estado sólido (núcleos 13C, 23Na e 29Si), as espectroscopias de Raman e infravermelho com transformadas de Fourier, as análises termogravimétricas e as análises de adsorção de água e azoto.

Síntese e estudos estruturais de novos materiais luminescentes

A presente dissertação teve como objectivo a síntese, caracterização e estudo das propriedades luminescentes de complexos livres e/ou imobilizados no material mesoporoso MCM-41. Na primeira parte estudaram-se complexos do tipo, Eu(NTA)3L2, onde NTA corresponte ao β-dicetonato 1-(2-naftoil)-3,3,3-trifluoro-acetonato, e L2 aos ligandos bidentados de azoto derivados do pirazolilpiridina e L aos ligandos monodentados (etil-4-piridilacetato, água, piridina e metilfenilsulfóxido). Alguns destes ligandos foram imobilizados e/ou impregnados no MCM-41, tendo-se posteriormente complexado o fragmento Eu(NTA)3. Na segunda parte estudou-se o efeito do contra-ião no complexo C[Eu(NTA)4], usando os catiões (C): tetrabutilamónio [NBu4]+, 1-butil-3-metilimidazolilo [C4mim]+ e 1-butil-3-metilpiridínio [C4mpy]+. O anião [Eu(NTA)4]- foi imobilizado no MCM-41 derivatizado com grupos 1-propil-3-metilimidazolilo. Todos os complexos preparados foram caracterizados pelas técnicas de análise elementar, termogravimetria, espectroscopias vibracionais (Infravermelho e Raman) e de ressonância magnética nuclear, e os materiais preparados foram adicionalmente analisados por difracção de raios-X de pós e ressonância magnética nuclear de estado sólido. Foram também estudadas as propriedades fotoluminescentes dos compostos, e para facilitar a análise dos resultados, nalguns casos foram preparados e caracterizados os compostos análogos de gadolínio.

Thiram in the environment: effect of humic substances and Cu(II) ions

Em Portugal, o tirame é um dos fungicidas mais utilizados, cujas vendas aumentaram significativamente nos últimos anos, sendo também um dos fungicidas mais utilizados em todo o mundo. No entanto, em comparação com outros pesticidas, existe falta de informação na literatura sobre o seu comportamento em sistemas ambientais, nomeadamente, no que diz respeito à sua degradação no solo ou em águas e produtos a que dá origem. Neste contexto, o objetivo deste trabalho foi estudar a influência das substâncias húmicas e iões cobre no comportamento e destino do tirame no meio ambiente. Foram realizados vários estudos para analisar o comportamento do tirame em solos com diferentes conteúdos de matéria orgânica e de iões cobre, e em águas naturais, estudando como as substâncias húmicas, os iões cobre e a luz solar podem afetar a sua degradação. Os estudos de adsorção-desadsorção do tirame nos solos revelaram que a matéria orgânica do solo e o conteúdo de cobre afetavam os processos de adsorção-desadsorção do tirame, influenciando a sua lixiviação e persistência no solo. De facto, verificou-se que o teor de cobre do solo tinha um efeito bastante marcante no processo de adsorçãodesadsorção do tirame. Verificou-se a ocorrência de reações entre o tirame e os iões cobre, cuja extensão durante os estudos de adsorção pode ser fortemente dependente do teor de cobre do solo e da concentração inicial de tirame em solução. Assim, a escolha do tempo de equilíbrio em estudos de adsorção e a determinação das isotérmicas de adsorção ao solo torna-se uma tarefa difícil. Além disso, os complexos formados com o cobre existente no solo são persistentes, não sendo facilmente lixiviados para as águas subterrâneas. Conclui-se que os iões cobre(II) podem contribuir para a imobilização do tirame no solo e o aumento da persistência dos seus resíduos ligados ao cobre. A partir de estudos de recuperação do tirame em águas naturais verificou-se a ocorrência de uma rápida degradação do tirame, devido provavelmente aos iões metálicos, nomeadamente, iões cobre. Verificou-se que dependendo da razão tirame:Cu podiam ocorrer dois processos: (i) complexação entre o tirame e o cobre, quando não há excesso de iões cobre, sendo o complexo formado mais persistente que o tirame; (ii) ou, quando há um grande excesso de iões cobre, a degradação do tirame e a estabilização dos produtos de degradação por complexação, podendo formar-se complexos que permanecem sem alteração em solução durante pelo menos dois meses. No geral, foi possível, pela primeira vez, identificar alguns dos complexos de cobre formados ao longo do tempo. Por fim, estudou-se a cinética de fotodegradação do tirame em solução aquosa sob a ação da luz solar e identificaram-se, pela primeira vez, três fotoprodutos. Verificou-se um aumento da velocidade de fotodegradação do tirame na presença de substâncias húmicas. Assim, podemos concluir que a matéria orgânica, os iões cobre(II) e a luz solar têm um efeito importante no comportamento do tirame no meio ambiente. Contudo, os iões cobre têm um efeito mais marcante na degradação e persistência dos produtos que são formados.

Avaliação ecológica do efeito combinado de contaminantes ambientais

The assessment of ecological status of lotic freshwater bodies, based on stringent criteria of classification, has been defined by the Water Framework Directive (WFD), as a result of the implementation and optimization of methodologies that integrate physico-chemical, biological, and hydromorphological parameters. It is recognized that the application of this methodology is not easy, because it requires deep technical and scientific knowledge; it is time consuming in its application involving high financial costs. Thus, the main objective of this study was the development of cheaper and faster complementary methodologies that may contribute to the technical application of the classification criteria defined by the WFD, achieving the same final results of evaluation. In order to achieve this main goal, the river Mau, a small mountain river subjected to different stressors (eg, metals, pesticides), was established as the main sampling area. This thesis reviewed the historical development of various biotic indexes and its application in assessing water quality, especially highlighting the new paradigm defined by the WFD, and the corresponding actions developed for optimization and intercalibration of methodologies, evaluating the final state of water bodies. The ecological spatiotemporal characterization of the river Mau focused on the application of the WFD methodology, using at this stage only macroinvertebrates collected during four seasons. Results were compared with historical data of the last three years and they demonstrated that the river is in good condition. However, the ecological quality decreased at certain locations indicating that organisms were subjected to some type of disturbance. As the ecological quality can be conditioned by pulses of contamination from the sediments, in environmental adverse conditions, assays were performed with elutriates, obtained from sediments collected near the mining complex Braçal-Palhal. Results showed that this method was effective achieving the state of contamination, which may be important in prioritizing/scoring of critical areas within river ecosystems potentially impacted, using the WFD methodology. However, this methodology requires the collection of sediment which can promote the modification and / or loss of contaminants. To solve this potential problem, we developed a new methodology to obtain similar results. For this, we used a benthic microalga, belonging to the Portuguese flora, sensitive to organic pollution and metals. This methodology was optimized for application in situ, by immobilization of diatom in calcium alginate beads. The results showedthat their sensitivity and normal growth rate are similar to data obtained when used free cells of diatom. This new methodology allowed the achievement of a very quick response on the degree of contamination of a site, providing a complementary methodology to WFD.

Ferroelectric : CNTs structures fabrication for advanced functional nano devices

This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.