Solution-Processable Carbazole-Based Conjugated Dendritic Hosts for Power-Efficient Blue-Electrophosphorescent Devices

A novel class of hosts suitable for solution processing has been developed based on a conjugated dendritic scaffold. By increasing the dendron generation, the highest occupied molecular orbital (HOMO) energy level can be tuned to facilitate hole injection, while the triplet energy remains at a high level, sufficient to host high-energy-triplet emitters. A power-efficient blue-electrophosphorescent device based on H2 (see figure) is presented.

Performance Enhancement of Polymer Light-Emitting Diodes by Using Ultrathin Fluorinated Polyimide Modifying the Surface of Poly(3,4-ethylene dioxythiophene):Poly(styrenesulfonate)

Herein, an insulating fluorinated polyimide (F-PI) is utilized as an ultrathin buffer layer of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in polymer light-emitting diodes to enhance the device performance. The selective solubility of F-PI in common solvents avoids typical intermixing interfacial problems during the sequential multilayer spin-coating process. Compared to the control device, the F-PI modification causes the luminous and power efficiencies of the devices to be increased by a factor of 1.1 and 4.7, respectively, along with almost 3-fold device lifetime enhancement. Photovoltaic measurement, single-hole devices, and X-ray photoelectron spectroscopy, are utilized to investigate the underlying, mechanisms, and it is found that the hole injection barrier is lowered owing to the interactions between the PEDOT:PSS and F-PI. The F-PI modified PEDOT:PSS layer demonstrates step-up ionization potential profiles from the intrinsic bulk PEDOT:PSS side toward the F-PI-modified PEDOT:PSS surface, which facilitate the hole injection.

Efficient multilayer white polymer light-emitting diodes with aluminum cathodes

Efficient multilayer white polymer light-emitting diodes (WPLEDs) with aluminum cathodes are fabricated. The multilayer structure is composed of a water soluble hole-injection layer, a toluene-soluble emissive layer, and an alcohol-soluble emissive layer. The polarity difference of the solvents used for spin coating these polymers allows for realization of the multilayer polymer structure. The recombination zone confined at the interface of the two emissive polymers avoids exciton quenching by electrodes, and white emission is realized by harvesting photons emitted from the two emissive polymers. A maximum luminous efficiency of 16.9 cd/A and a power efficiency of 11.1 lm/W are achieved for this WPLED.

Comparison for DNA primary sequence

In this article, two schemes are suggested based on three exons of beta-globin gene belonging to 10 species for comparison of DNA primary sequences. At first, the positions of four nucleic acid bases were extracted, and then based on the information, as the numerical characterization of DNA sequences, the sequence invariants were derived. Sequences comparisons of 10 species selected in this work by using these invariants were performed. The results, especially with scheme 2, are quite satisfactory.

A novel invariant and sequence comparison for DNA

We consider numerical characterization of DNA primary sequence based on the positions of bases (a, t, c, g) and the pairs of bases X, Y in DNA (X, Y=a, t, c, g). This leads to a representation of DNA by a numerical sequence. Then, we extract a novel invariant (molecular connectivity index) from the derived numerical sequences. The suitable invariant can offer a characterization of DNA primary sequence. Finally, we provide an illustration of its utility by making a comparison between ten DNA sequences belonging to beta-globin gene in different species. The evolutionary relationships of ten species we have revealed in this contribution accord with phylogenetic tree properly.

Density-functional study of lanthanum, ytterbium, and lutetium dimers

La-2, Yb-2, and Lu-2 have been studied by use of the density-functional methods B3LYP, BLYP, B3PW91, BHLYP, BP86, B3P86, MPW1PW91, and PBE1PBE. In these density-functional methods, the exchange functional is from either Becke's three-parameter HF-DFT hybrid exchange functional (B3), pure DFT exchange functional of 1988 (B), a modification of the half-and-half HF/DFT hybrid method (BH), Perdew-Wang 1991 (PW91), or Barone's modified PW91 (MPW1), while the correlation functional is from either Lee, Yang, and Parr (LYP), Perdew-Wang 1991 (PW91), or Perdew 86 (P86). PBE1PBE is the generalized-gradient-approximation exchange-correlation functional of Perdew, Burke, and Ernzerhof. For La-2, the calculated bond distance is in reasonable agreement with the experiment, but the calculated vibrational frequency is underestimated significantly compared with the experiment. Only BP86 and B3P86 have the best performance in reproducing the experimental dissociation energy for La-2. For the van der Waals dimer Yb-2, three functionals, B3LYP, BLYP, and BHLYP have excellent performance in reproducing the spectroscopic constants compared with both the experiment and previous theoretical studies.

Phase structure and transition behavior of a liquid crystal 5-{[(4 '-heptoxy-4-biphenylyl)oxy]carbonyl}-1-pentyne

The phase structures and transition behaviors of a novel liquid crystal compound containing biphenylyl mesogen, 5-{[(4'-heptoxy-4-biphenytyl) oxy]carbonyl}-1-pentyne (A3E'O7), have been investigated by differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and wide angle X-ray diffraction (WAXD). In contrast to the published compound 5- {[(4'-heptoxy-4-biphenyl-yl)carbonyl]oxy}-1-pentyne (A3EO7), in which the ester bridge between the mesogenic core and the flexible spacer has different linkage order, A3E'O7 shows strikingly different phase structure and transition behaviors. Overall, A3E'O7 has better packing order and higher transition temperatures. It undergoes three enantiotropic stable liquid crystalline phases which are associated to smectic A (S-A) phase (100.2-98.2 degrees C), smectic C (S-C) phase (98.2-87.2 degrees C) and highly ordered smectic X (S-X) phase (87.2-63.3 degrees C), respectively, till eventual crystallization takes place upon cooling from isotropic state to room temperature. However, A3EO7 only shows monotropic SA (72.4-53.6 degrees C) phase and the metastable monotropic S-C phase provided that the same thermal treatment is applied.

人参四逆汤抗休克作用的有效组分成分分析

分析人参四逆汤抗失血性休克作用的提取组分 S- 1和 S- 7的组成成分。方法　结合硅胶色谱柱分离 ,利用 ESI/MSn、MAL DI- TOF/MS等技术分析鉴定 S- 1和 S- 7的化学成分。结果　从人参四逆汤水煎液的抗休克作用的有效组分 S- 7中分析和鉴定了人参皂苷 - Ra1 、- Ra2 、- Rb1 、- Rb2 、- Rb3、- Rc、- Rd、- Re、- Rg1 、- Rg2 、- Rg3、- Rf等 12种人参皂苷 ;从有效组分 S- 1中检出下列二萜生物碱成分 :苯甲酰次乌头碱油酸酯 (14 - benzoylhypaconine- 8-linoleate,HAL )、苯甲酰去氧乌头碱油酸酯 (14 - benzoyldeoxyaconine- 8- oleate,HAO )、苯甲酰次乌头碱棕榈酸酯(14 - benzoylhypaconine- 8- palmitate,HAP)、苯甲酰中乌头碱 (benzoylmesaconitine,BM)、苯甲酰乌头碱 (benzoyla-conitine,BA)、苯甲酰次乌头碱 (benzoylhypaconitine,BH)。结论...

人参四逆汤生物碱和皂苷成分的研究

研究人参四逆汤的有效成分。方法 :利用软电离质谱技术 ,对人参四逆汤的有效成分进行鉴定。结果 :从人参四逆汤水煎液中分析和鉴定了人参皂苷Ra1,Ra2 ,Rb1,Rb2 ,Rb3 ,Rc ,Rd ,Re,Rg1,Rg2 ,Rg3 ,Rf等 12种人参皂苷 ;苯甲酰中乌头碱 (BM )、苯甲酰乌头碱 (BA)、苯甲酰次乌头碱 (BH)、尼奥灵 (NL)、附子灵 (FL)、14 乙酰基塔拉地萨敏 (AT)、苯甲酰次乌头碱亚油酸酯 (HAL)、苯甲酰去氧乌头碱亚油酸酯 (HAO)、苯甲酰次乌头碱棕榈酸酯 (HAP)、塔拉地萨敏 (TS)等 10种二萜生物碱。结论 :含有脂肪酸酯型生物碱的提取组分具有抗休克作用 ,含有人参皂苷的提取组分具有明显的负性肌力作用。

Helical single-lamellar crystals thermotropically formed in a synthetic nonracemic chiral main-chain polyester

Phase structures and transformation mechanisms of nonracemic chiral biological and synthetic polymers are fundamentally important topics in understanding their macroscopic responses in different environments. It has been known for many years that helical structures and morphologies can exist in low-ordered chiral liquid crystalline (LC) phases. However, when the chiral liquid crystals form highly ordered smectic liquid crystal phases, the helical morphology is suppressed due to the crystallization process. A double-twisted morphology has been observed in many liquid crystalline biopolymers such as dinoflaggellate chromosomes (in Prorocentrum micans) in an in vivo arrangement. Helical crystals grown from solution have been reported in the case of Bombyx mori silk fibroin crystals having the beta modification. This study describes a synthetic nonracemic chiral main-chain LC polyester that is able to thermotropically form helical single lamellar crystals. Flat single lamellar crystals can also be observed under the same crystallization condition. Moreover, flat and helical lamellae can coexist in one single lamellar crystal, within which one form can smoothly transform to the other. Both of these crystals possess the same structure, although translational symmetry is broken in the helical crystals. The polymer chain folding direction in both flat and helical lamellar crystals is determined to be identical, and it is always along the long axis of the lamellae. This finding provides an opportunity to study the chirality effect on phase structure, morphology, and transformation in condensed states of chiral materials. [S0163-1829(99)01042-5].

A STUDY OF THE SPECTRUM PROPERTIES AND THE PHOTOVOLTAGE RESPONSE OF NANOCRYSTALLINE ND2O3

The diffuse reflectance spectra of nanocrystalline Nd2O3 were measured in the ultraviolet-visible region, It is found that the part of f-->f transition bands were widened and red-shift occurred. The absorption tail-band in the region from 300 to 550 nm was assigned to the O-2p-->Nd-4f transition. The behavior of light-induced charge transfer and photovoltaic properties of nanocrystalline Nd2O3 were studied by the surface photovoltage spectroscopy (SPS) and electric field modulating SPS techniques. The SPS response shows two peaks at 330 nm(P-1) and 380 nm(P-2) in the UV-Vis range, The spectral features observed can be explained in terms of charge transfer and interband transition.

The Photovoltage Properties and the Spectrum Analyses of Nanocrystalline Er2O3

The diffuse reflectance spectra of nanocrystalline Er2O3 were measured in the UV-vis region. It was found that the f -> f transition bands become stronger with the decrease of the size of particles. The tail-band in the range of 300 similar to 550nm was assigned to the O2p -> Er4f transition. Both behavior of light-induced charge transfer and photovoltaic properties of nanocrystalline Er2O3 were investigated with surface photovoltage spectroscopy (SPS). The SPS shows that two peaks appear at 340nm (p(1)) and 385nm (p(2)). The observed spectral features can be explained in terms of charge transfer and interband transition.

PHASE-BEHAVIOR IN THERMOTROPIC LIQUID-CRYSTALLINE POLYMER AND POLYARYLETHERSULFONE BLENDS

An experimental study of the phase morphology and miscibility of binary blends of poly-arylethersulfone (PES) and a liquid crystalline polymer (LCP) of p-oxybenzoate and ethylene terephthalate units in a 60/40 molar ratio (PET-60PHB) is described. Blends

Tectonic geomorphology of the Ryukyu Trench-Arc-Backarc System: geological-geophysical exploration and mapping

OKINAWA TROUGH; BASIN