1000 resultados para Amido de milho - Características estruturais


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Nitrogen (N) is one of the major nutrients nutrients absorbed in corn crops, for this reason, nitrogen based fertilizers are expensive and suffer large losses to the environment. Therefore, a diversity of fertilizers, known as special or of enhanced efficiency fertilizers, has been commercialized. The aim of this study was to evaluate the effect of different sources and levels of nitrogen fertilization in coverage, for agronomic characteristics and corn grain productivity, cultivated in the Cerrado region. The experiment was installed in 2015, in Monte Carmelo-MG. The experimental design utilized was a RCBD with four replications. The treatments consisted of five N sources (common urea, polymerized urea, urea combined with NBPT (thiophosphate N-n-butiltriamida or N-n-butiltriamida of thiophosphoric acid), organomineral combined or not with NBPT), five topdress N levels (40, 80, 120, 160 and 200 kg ha-1) and a control (no N topdressing). The evaluated parameters were: the first spike insertion height (FSIH), plant height (PH), stem diameter (DC), number of rows per spike (RS), number of grains per row (GR), spike length (SL), spike diameter (SD), prolificacy (EP), 1,000-grain weight (TGW), leaf chlorophyll index (LCI), content of foliar nutrients, dry matter in aerial part of the plant (DM) and productivity (PG). The results showed that, with the exception of stem diameter, there was no significant statistical difference between sources of nitrogen, indicating that the organomineral source is as efficient as a mineral source. Regardless of the source, the addition of N fertilizers in increasing doses promoted enhanced development of corn plants, increased chlorophyll content, stem diameter, leaf N content, crude protein and productivity. For most phytotechnical features, there was no significant statistic difference in treatments compared to control.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

v. 17, n .2, p. 164-174, abr./jun. 2016.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Este estudo incide sobre as características que a presença do ião flúor em moléculas concede. Mais concretamente em fluoroquinolonas, antibióticos que cada vez são mais utilizados. Fez-se uma analise de vários parâmetros para obtermos informação sobre a interação fármaco-receptor nas fluoroquinolonas. Sendo para isso utilizadas técnicas de caracterização química computacional para conseguirmos caracterizar eletronicamente e estruturalmente (3D) as fluoroquinolonas em complemento aos métodos semi-empíricos utilizados inicialmente. Como é sabido, a especificidade e a afinidade para o sitio alvo, é essencial para eficácia de um fármaco. As fluoroquinolonas sofreram um grande desenvolvimento desde a primeira quinolona sintetizada em 1958, sendo que desde ai foram sintetizadas inúmeros derivados da mesma. Este facto deve-se a serem facilmente manipuladas, derivando fármacos altamente potentes, espectro alargado, factores farmacocinéticos optimizados e efeitos adversos reduzidos. A grande alteração farmacológica para o aumento do interesse neste grupo, foi a substituição em C6 de um átomo de flúor em vez de um de hidrogénio. Para obtermos as informações sobre a influência do ião flúor sobre as propriedades estruturais e electrónicas das fluoroquinolonas, foi feita uma comparação entre a fluoroquinolona com flúor em C6 e com hidrogénio em C6. As quatro fluoroquinolonas presentes neste estudo foram: ciprofloxacina, moxiflocacina, sparfloxacina e pefloxacina. As informações foram obtidas por programas informáticos de mecânica quântica e molecular. Concluiu-se que a presença de substituinte flúor não modificava de forma significativa a geometria das moléculas mas sim a distribuição da carga no carbono vicinal e nos átomos em posição alfa, beta e gama relativamente a este. Esta modificação da distribuição electrónica pode condicionar a ligação do fármaco ao receptor, modificando a sua actividade farmacológica.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

As leguminosas, como o feijão, são consideradas importantes fontes de nutrientes para humanos e a contaminação por fungos e consequente produção de micotoxinas pode estar diretamente influenciada pela sua composição química. Alguns compostos estão associados aos mecanismos de defesa das leguminosas atuando como inibidores de enzimas digestivas ou barreiras físicas à patógenos. É o caso dos compostos fenólicos (CF) e algumas estruturas de caráter proteico. O objetivo deste estudo foi verificar a susceptibilidade de feijões à contaminação por aflatoxinas (AFLAs), através da avaliação da presença de compostos inibidores de enzimas fúngicas. Foi realizada a validação de um método para determinação de AFLAs em feijão. Os CF livres (solúveis em metanol), conjugados (solúveis em etanol) e ligados, bem como as diferentes frações proteicas (albumina, globulina, glutelina e prolamina) foram determinadas em 10 amostras de feijão pertencentes às espécies Phaseolus vulgaris, Vigna unguiculata e Vigna angularis. O seu potencial como inibidor de α-amilase foi testado nos extratos fenólicos e protéicos. Os feijões vermelho e carioca apresentaram os maiores teores de CF totais (1766 µg.g -1 e 1190 µg.g -1 , respectivamente) e os feijões fradinho e branco os menores teores (183 µg.g -1 e 192 µg.g -1 ). Os extratos de CF conjugados apresentaram os teores mais elevados de AF, onde os feijões amendoim se destacou pela maior concentração (68 µg.g -1 ) e o feijão azuki pelo menor (28 µg.g -1 ). Nos extratos de CF livres e conjugados, o ácido clorogênico foi o majoritário em 60% dos feijões analisados e nos extratos de CF ligados, o ácido ferúlico foi o majoritário em 90% dos feijões analisados. Com relação às frações proteicas solúveis, o feijão carioca apresentou o maior teor de albumina (559 mg.g -1 ), globulina (164 mg.g -1 ) e glutelina (325 mg.g -1 ). Com relação à fração prolamina, o feijão preto (brasileiro e chinês) apresentou o maior teor (64 e 65 mg.g -1 , respectivamente), seguido pelo feijão carioca (54 mg.g -1 ). Os limites de detecção (LDm) obtidos para o método de determinação de AFLAs foram de 2,4 µg.kg-1 ; 0,036 µg.kg-1 e 0,06 µg.kg-1 para as AFLAs B1, B2 e G2 e os limites de quantificação (LQm) foram de 4,8 µg.kg-1 (AFLAB1); 0,12 µg.kg- 1 (AFLA B2 e G2). Não foram detectadas AFLAs B1, B2, G1 e G2 nos feijões analisados. Os CF dos extratos etanólicos dos feijões amendoim e azuki e os extratos contendo as proteínas solúveis em etanol dos feijões carioca e fradinho foram testados quanto ao seu potencial para inibição da α-amilase de Aspergillus oryzae (atividade de 4,8 mg amido hidrolisado.mg proteína-1 .mL-1 ). O extrato proteico do feijão fradinho se destacou, pois atingiu um percentual de inibição específica de aproximadamente 56%. Os CF apresentaram uma tendência à inibição incompetitiva e os extratos proteicos não apresentaram um comportamento de inibição que permitisse definir o mecanismo de inibição. Os extratos protéicos e fenólicos dos feijões mostraram ser capazes de inibir a amilase fúngica sugerindo que este fato pode estar associado a ausência da presença de AFLAs nas amostras analisadas.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Starch has properties that make it one of the most studied biopolymers today. It is biodegradable, biocompatible, stable and non-toxic. This work has synthesis of starch and tapioca microparticles, through chemical modification by crosslinking with sodium tripolyphosphate agent in concentrations 7.5 and 15% (m / m). The amylose content was measured for starch and commercial cassava starch at 21.8% and 28.6%, respectively. According to the solubility index, processing in basic medium does not change the solubility of the material, but the addition of crosslinking agent increases this index, which changed from 12.8% for the control unprocessed, to 22.4% for the A5R15 sample. Soluble starch-based materials had a significant increase in the crosslinking density by increasing the concentration of crosslinker, from 1.4 in A5R7,5 sample, to 1.9 in A5R15. The cassava starch-based materials exhibited an opposite behavior: to increase the concentration of crosslinker crosslinking density decreased significantly in F5R7.5 from 2.9, to 1.9 in F5R15 sample. The point of zero charge (PZC) shows that below pH 4 the surface is positively charged. The surface area data is between 3,04 and 1,15 m2.g-1. The pore volume between 2.94 and 1.33 cm3.g-1 and pore size around 1.5 nm. The SEM indicates uneven distribution of microparticles, which are smooth, with no ridges. The maximum adsorption capacity of the materials were tested at pH 7.7 and for A5R15 and CA sample, at pH 2, 5, 6 and 9. It is noted that the processing in basic medium reduces the adsorption capacity of CA and CF in respect fo A and F. The adsorption in A5R15 sample has great dependency on the pH, reaching a value of 587 μg.g-1 in pH 7.7. The samples A5R15 and F5R7,5 adsorbed similar amounts, according to the statistical analysis, and significantly higher than their respective controls and showed lower desorption, indicating that the modification process was effective to control the release of methylene blue. The infrared spectra not show the characteristic bands of the phosphate bonds to the material formed, however, developments in hydroxyl characteristic band suggest modification in the way this group was linked after the reaction. After adsorption, the infrared spectra show different format in the band of hydroxyl. PCA analysis shows that the greatest changes observed in the IR spectra are observed in the region of 3500 cm-1. Thermal analysis showed three thermal events related to dehydration and material degradation. It is observed that the processing increases the temperature to the first mass loss, fixed at 12%, but not observed increased stability due to the presence of crosslinker or process.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We conducted a field experiment near Abelardo Luz, Santa Catarina, from October 2012 to April 2014, to evaluate the effect interaction of nitrogen fertilization and height of canopy over the N nutrition of corn subsequently grown to pasture. The data belonging to this thesis are related to the first two production cycles obtained in sorghum pasture (2012/2013), oat (2013) and corn crop (2013/2014). In the evaluation of forage sorghum and oat it was used the same experimental design, consisting of randomized complete block in a factorial arrangement (2 x 2) with three replications. The first factor was considered canopy height (Low and High) and the second factor was the fertilization of cover crop pasture (0 and 200 kg N.ha-1). In phase I and II, the combination of factors evaluators were prepared in the same experimental unit. For corn crop the design was a randomized complete block in a factorial design (2X2X4X6) with three replications. Factors considered in corn were: canopy height of pasture (Low and High), nitrogen application times (NG - nitrogen in the grains and NP - nitrogen in pasture), nitrogen fertilization in corn (0, 100, 200 and 300 kg N.ha-1) and time (46, 53, 60, 67, 76 and 103 days after sowing the maize). In phases I and II, in general the use of N in the pasture increased the productive potential of the pasture and animal management and canopy height has changed the dynamics of structural components and botanical pasture. In cold conditions for long periods and not acclimatized plants the adoption of high nitrogen fertilization and height high grazing pasture leave vulnerable to damage caused by the freezing of plants. The anticipation of nitrogen fertilization on pasture positively affects the corn crop by increasing the accumulated dry matter and N content in the plant. Nitrogen nutritional content of corn with the anticipation of fertilization in pasture is suitable for obtaining high crop production in integrated crop-livestock system. When used nitrogen only coverage in corn sufficiency level in the nitrogen nutrition is achieved with the use of 100 kg N.ha-1. With the use of 200 kg N ha -1 NG and NP no difference in nitrogen content and nitrogen nutrition index.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Artificial lakes must differ from natural lakes in important structural and functional aspects that need to be understood so that these ecosystems can be properly managed. The aim of this work was to test the hypothesis that the artificial lakes (impoundments) in the semi-arid region of the Rio Grande do Norte State are more eutrophic and turbid and have different trophic structure when compared to the natural coastal lakes that occur in the humid eastern coast of the State. To test this hypothesis, 10 natural lakes and 8 artificial lakes with about 100 ha were sampled between September and November 2005 for the determination of some limnological variables and the abundance of the main fish species, which were grouped in three trophic guilds: facultative piscivores, facultative planktivores and omnivores. The results show that the artificial lakes had significantly higher concentrations of total nitrogen, total phosphorus, chlorophyll a , total and volatile suspended solids than the natural lakes. Results also show that the values of pH, total alkalinity, electric conductivity, turbidity as well as the coefficient of vertical attenuation of light were significantly higher in the artificial lakes than in the natural lakes. In the artificial lakes, the abundance of facultative planktivores was significantly higher, while the abundance of facultative piscivores significantly lower than in the natural lakes. There was no significant difference in the abundance of omnivorous fish between the two types of lakes. These results suggest that the increase in turbidity together with the other changes in the water quality of the artificial lakes, modifies the trophic structure of the fish communities reducing the importance of piscivores and the length of the food chains

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Dissertação de Mestrado, Biologia Marinha, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Tese (doutorado)—Universidade de Brasília, Faculdade de Economia, Administração e Contabilidade, Programa de Pós-Graduação em Administração, 2016.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Dissertação (mestrado)—Universidade de Brasília, Faculdade Gama, Programa de Pós-Graduação em Engenharia Biomédica, 2015.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Mestrado em Engenharia Agronómica - Especialização em Horto-fruticultura e Viticultura - Instituto Superior de Agronomia - UL

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Bactérias endofíticas são microrganismos que habitam o interior dos tecidos vegetais e são conhecidas promotoras do crescimento de plantas, favorecendo sua nutrição, pela solubilização de fosfatos, além de produzirem fito-hormônio, enzimas e sideróforos, apresentando potencial para uso como bioinoculantes. O objetivo deste trabalho foi isolar e caracterizar bactérias endofíticas de milho eficientes na solubilização de fosfatos de cálcio e de ferro e na produção de sideróforos, substâncias que atuam na captação de ferro.Para o isolamento das bactérias, foram coletadas plantas de milho no florescimento em área de cerrado, sendo estas posteriormente desinfestadas e maceradas para o isolamento dos endófitos. Foram isoladas 113 bactérias provenientes de raízes (54,9%), folhas (20,4%) e seiva de milho (24,8%). Dessas bactérias, 49 foram caracterizadas geneticamente com base na sequência do 16S rDNA e avaliadas quanto à capacidade de solubilização de fosfatos em meio de cultura líquido contendo fosfato de cálcio e de ferro e produção de sideróforos. Os isolados mais eficientes na solubilização de fosfato de cálcio e fosfato de ferro produziram entre 179,4 a 193,7 mgP. L-1 e 62,7 a 68,7 mg P. L-1, respectivamente. Foi observada uma correlação negativa de -0,58 e -0,48 entre a solubilização de fósforo nos dois fosfatos testados, P-Ca e P-Fe, e os valores de pH, respectivamente, indicando a produção de ácidos orgânicos como o principal mecanismo de solubilização de P. O sideróforo produzido por 69% dos microrganismos avaliados foi do tipo carboxilato. As bactérias endofíticas eficientes na solubilização de P foram identificadas principalmente como pertencentes ao gênero Bacillus e Pantoea. Foi possível concluir que as estirpes bacterianas provenientes do microbioma interno de milho cultivado em solo de cerrado possuem características promissoras de biossolubilização de fosfatos e promoção de crescimento de plantas, sendo possível neste estudo a seleção de seis isolados do gênero Bacillus para futuros testes de inoculação em plantas.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Artificial lakes must differ from natural lakes in important structural and functional aspects that need to be understood so that these ecosystems can be properly managed. The aim of this work was to test the hypothesis that the artificial lakes (impoundments) in the semi-arid region of the Rio Grande do Norte State are more eutrophic and turbid and have different trophic structure when compared to the natural coastal lakes that occur in the humid eastern coast of the State. To test this hypothesis, 10 natural lakes and 8 artificial lakes with about 100 ha were sampled between September and November 2005 for the determination of some limnological variables and the abundance of the main fish species, which were grouped in three trophic guilds: facultative piscivores, facultative planktivores and omnivores. The results show that the artificial lakes had significantly higher concentrations of total nitrogen, total phosphorus, chlorophyll a , total and volatile suspended solids than the natural lakes. Results also show that the values of pH, total alkalinity, electric conductivity, turbidity as well as the coefficient of vertical attenuation of light were significantly higher in the artificial lakes than in the natural lakes. In the artificial lakes, the abundance of facultative planktivores was significantly higher, while the abundance of facultative piscivores significantly lower than in the natural lakes. There was no significant difference in the abundance of omnivorous fish between the two types of lakes. These results suggest that the increase in turbidity together with the other changes in the water quality of the artificial lakes, modifies the trophic structure of the fish communities reducing the importance of piscivores and the length of the food chains

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O consórcio de culturas, além de melhorar a qualidade do solo, proporciona maior produção por área do que o monocultivo. O estudo objetivou avaliar o desempenho do híbrido simples de milho BRS 1030 semeado em sistema iLPF, Santa Fé e Convencional. O delineamento experimental para análise das características agronômicas e produtivas do milho foi o de blocos casualizados, com seis repetições. Os valores de altura (planta e espiga) foram similares, comparando as médias dos sistemas. Os números de produtividade de grãos por ha não apresentaram diferença significativa, entretanto, verificou-se que os sistemas iLPF e Santa Fé, ambos com população cerca de 14% menordo que o sistema Convencional, proporcionaram maior produção por indivíduo, cerca de 13% superior à obtida no sistema Convencional. A produção de palhada foi superior no sistema Santa Fé (5.612,68 kg.ha-1) em relação aos demais sistemas. O desenvolvimento do milho nos sistemas iLPF e Santa Fé foram semelhantes e superiores ao sistema Convencional.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objetivou-se verificar o desempenho agronômico da cultura do milho em função do tratamento de semen-tes com o inoculante Azo Total® composto de Azospirillum sp., com o bioestimulante Stimulate® e com o fertilizante líquido Cellerate®, individualmente e em combinação. O experimento foi conduzido a campo em Sete Lagoas, MG, utilizando-se o delineamento de blocos casualizados com quatro repetições e tratamentos dispostos em esquema fatorial 2x8, sendo duas cultivares de milho (P30F53 e P30F53 YH) e sete tratamentos de sementes mais a testemeunha (T1 = Testemunha; T2 = Azo Total®; T3 = Stimulate®; T4 = Cellerate®; T5 = Azo Total® + Stimulate®; T6 = Azo Total® + Cellerate®; T7 = Stimulate® + Cellerate®; T8 = Azo Total® + Cellerate® + Stimulate®). Para a análise do desempenho agronômico, foram avaliadas as características: altura de planta; altura de espiga; número de espigas; produtividade; diâmetro do colmo; análise foliar; estande final; índice de espiga; e peso de 1.000 grãos. Nas condições de realização deste trabalho, a cultivar P30F53YH proporciona maior produtividade de grãos quando tratada com os produtos Azo Total®, Stimulate® e Cellerate®. Tratamentos de sementes de milho com os produtos comerciais Azo Total®, Stimulate® e Cellerate® não incrementam significativamente a produtividade de grãos. Tratamento de sementes com Azo Total®, Stimulate® e Cellerate® não influenciam os teores foliares de nutrientes em plantas de milho.