Laskentamalli PKL-koelaitteiston pienen vuodon kokeen simuloimiseksi Apros-ohjelmistolla

Työn tavoitteena oli tehdä Apros-laskentamalli PKL-koelaitteistosta ja testata kuinka hyvin Apros pystyy laskemaan PKL-koelaitteistolla suoritetun E2.2 pienen vuodon kokeen. Tavoitteena oli myös tarkastella boorittoman veden tulpan etenemistä pienen vuodon kokeen aikana. PKL-koelaitteisto vastaa saksalaista sähköteholtaan 1300 MW olevaa Philippsburg 2 painevesilaitosta. Koelaitteiston tilavuudet ja teho on skaalattu kertoimella 145. Työssä tehdyllä laskentamallilla tarkasteltiin boorittoman veden tulpan liikkumista pienen vuodon kokeen aikana. Kun malli oli valmis, laskenta suoritettiin Apros 5.05 versiolla. Boorittoman veden tulpan etenemisen laskennassa käytettiin toisen kertaluvun diskretointia, jolla booripitoisuuden muutokset säilyvät teräväreunaisina. Laskentamalli pystyi kuvaamaan koelaitteistolla suoritetussa pienen vuodon kokeessa tapahtuneet ilmiöt varsin hyvin. Eroa koetuloksiintuli pääkiertopiirien luonnonkiertojen alkamishetkistä ja primääripaineen käyttäytymisessä. Kokeen alkutilanne ei ollut stationääritila, joten alkutilanteen asettamisessa oli hankaluuksia. Varsinkin pääkiertopiirien veden pinnankorkeuksienasettamisessa oli vaikeuksia, koska veden pinnankorkeuksien erot pyrkivät tasoittumaan nopeasti kokeen aikana. Apros pystyi laskemaan PKL-koelaitteistolla suoritetun pienen vuodon kokeen hyvin. Mallilla tulisi kuitenkin laskea vielä toisentyyppisiäkin kokeita, ennen kuin voidaan varmuudella tietää mallin toimivuus. PKL-koelaitteisto vastaa pääpiirteiltään Suomeen rakennettavaa Olkiluoto 3 ydinvoimalaitosta. Tehty työ antaa lisävarmuutta, kun Olkiluoto 3 laitoksen turvallisuustarkasteluita tehdään.

Ideasta toimintaan - yrityksen perustamisprosessi Case: Nextum Oy

Tutkimuksessa kuvataan yrityksen perustamisprosessi idean synnystä toiminnan käynnistämiseen. Tutkimuksessa painotetaan sähköisen kaupankäyntimallin toteutuksessa huomionarvoisia tekijöitä, hyötyjä ja ongelmia sekä analysoidaan case-yrityksen perustamisprosessia. Tutkimus toteutettiin laadullisena case-tutkimuksena, jonka empiriaosio koostuu Nextum Oy:n perustajajäsenien kokemuksista. Yrityksen perustaminen sisältää kolmevaihetta; liikeidean kehittäminen, Iiiketoimintasuunnitelman laadinta ja perustamistoimien teko. Sähköinen kaupankäynti edellyttää tuotteen soveltuvuutta Internet-myyntiin sekä logistiikan että asiakkaiden tavoitettavuuden näkökulmasta. Sähköinen kaupankäynti mandollistaa kustannussäästöjä, palvelun parantamisen ja toiminnan tehostamisen. Samalla asiakkaiden valta kasvaa, kilpailu kiristyy ja arvoketjut uusiutuvat. Sähköinen kaupankäyntimalli todettiin Nextum Oy:n kannattavuuden kannalta keskeiseksi tekijäksi. Yrityksen perustaminen eteni kirjallisuudenoppien mukaan, mutta muutamia ongelmakohtia löytyi muun muassa projektin aikataulutuksesta.

Essential surgery: the way forward.

INTRODUCTION: Very little surgical care is performed in low- and middle-income countries (LMICs). An estimated two billion people in the world have no access to essential surgical care, and non-surgeons perform much of the surgery in remote and rural areas. Surgical care is as yet not recognized as an integral aspect of primary health care despite its self-demonstrated cost-effectiveness. We aimed to define the parameters of a public health approach to provide surgical care to areas in most need. METHODS: Consensus meetings were held, field experience was collected via targeted interviews, and a literature review on the current state of essential surgical care provision in Sub-Saharan Africa (SSA) was conducted. Comparisons were made across international recommendations for essential surgical interventions and a consensus-driven list was drawn up according to their relative simplicity, resource requirement, and capacity to provide the highest impact in terms of averted mortality or disability. RESULTS: Essential Surgery consists of basic, low-cost surgical interventions, which save lives and prevent life-long disability or life-threatening complications and may be offered in any district hospital. Fifteen essential surgical interventions were deduced from various recommendations from international surgical bodies. Training in the realm of Essential Surgery is narrow and strict enough to be possible for non-physician clinicians (NPCs). This cadre is already active in many SSA countries in providing the bulk of surgical care. CONCLUSION: A basic package of essential surgical care interventions is imperative to provide structure for scaling up training and building essential health services in remote and rural areas of LMICs. NPCs, a health cadre predominant in SSA, require training, mentoring, and monitoring. The cost of such training is vastly more efficient than the expensive training of a few polyvalent or specialist surgeons, who will not be sufficient in numbers within the next few generations. Moreover, these practitioners are used to working in the districts and are much less prone to gravitate elsewhere. The use of these NPCs performing "Essential Surgery" is a feasible route to deal with the almost total lack of primary surgical care in LMICs.

ADVANCED NUMERICAL METHODS FOR SIMULATING MICROBUBBLE IN AN AERATED MIXING TANK

Fluid mixing in mechanically agitated tanks is one of the major unit operations in many industries. Bubbly flows have been of interest among researchers in physics, medicine, chemistry and technology over the centuries. The aim of this thesis is to use advanced numerical methods for simulating microbubble in an aerated mixing tank. Main components of the mixing tank are a cylindrical vessel, a rotating Rushton turbine and the air nozzle. The objective of Computational Fluid Dynamics (CFD) is to predict fluid flow, heat transfer, mass transfer and chemical reactions. The CFD simulations of a turbulent bubbly flow are carried out in a cylindrical mixing tank using large eddy simulation (LES) and volume of fluid (VOF) method. The Rushton turbine induced flow is modeled by using a sliding mesh method. Numerical results are used to describe the bubbly flows in highly complex liquid flow. Some of the experimental works related to turbulent bubbly flow in a mixing tank are briefly reported. Numerical simulations are needed to complete and interpret the results of the experimental work. Information given by numerical simulations has a major role in designing and scaling-up mixing tanks. The results of this work have been reported in the following scientific articles: ·Honkanen M., Koohestany A., Hatunen T., Saarenrinne P., Zamankhan P., Large eddy simulations and PIV experiments of a two-phase air-water mixer, in Proceedings of ASME Fluids Engineering Summer Conference (2005). ·Honkanen M., Koohestany A., Hatunen T., Saarenrinne P., Zamankhan P., Dynamical States of Bubbling in an Aerated Stirring Tank, submitted to J. Computational Physics.

What to compare and how: Comparative transcriptomics for Evo-Devo.

Evolutionary developmental biology has grown historically from the capacity to relate patterns of evolution in anatomy to patterns of evolution of expression of specific genes, whether between very distantly related species, or very closely related species or populations. Scaling up such studies by taking advantage of modern transcriptomics brings promising improvements, allowing us to estimate the overall impact and molecular mechanisms of convergence, constraint or innovation in anatomy and development. But it also presents major challenges, including the computational definitions of anatomical homology and of organ function, the criteria for the comparison of developmental stages, the annotation of transcriptomics data to proper anatomical and developmental terms, and the statistical methods to compare transcriptomic data between species to highlight significant conservation or changes. In this article, we review these challenges, and the ongoing efforts to address them, which are emerging from bioinformatics work on ontologies, evolutionary statistics, and data curation, with a focus on their implementation in the context of the development of our database Bgee (http://bgee.org). J. Exp. Zool. (Mol. Dev. Evol.) 324B: 372-382, 2015. © 2015 Wiley Periodicals, Inc.

From caging to rouse dynamics in polymer melts with intramolecular barriers: a critical test of the mode coupling theory

By means of computer simulations and solution of the equations of the mode coupling theory (MCT),we investigate the role of the intramolecular barriers on several dynamic aspects of nonentangled polymers. The investigated dynamic range extends from the caging regime characteristic of glass-formers to the relaxation of the chain Rouse modes. We review our recent work on this question,provide new results, and critically discuss the limitations of the theory. Solutions of the MCT for the structural relaxation reproduce qualitative trends of simulations for weak and moderate barriers. However, a progressive discrepancy is revealed as the limit of stiff chains is approached. This dis-agreement does not seem related with dynamic heterogeneities, which indeed are not enhanced by increasing barrier strength. It is not connected either with the breakdown of the convolution approximation for three-point static correlations, which retains its validity for stiff chains. These findings suggest the need of an improvement of the MCT equations for polymer melts. Concerning the relaxation of the chain degrees of freedom, MCT provides a microscopic basis for time scales from chain reorientation down to the caging regime. It rationalizes, from first principles, the observed deviations from the Rouse model on increasing the barrier strength. These include anomalous scaling of relaxation times, long-time plateaux, and nonmonotonous wavelength dependence of the mode correlators.

Compliance of hospitality premises to the ban on smoking in all enclosed public places in the Seychelles

In Seychelles, comprehensive tobacco control legislation enacted in 2009, and subsequent regulations, ban smoking in all enclosed places (defined as any area under a fixed or transient roof). A survey in October-November 2014 assessed i) the compliance to the Act and these regulations in 63 restaurants, bars or discotheques and ii) knowledge of the Tobacco control Act and these regulations of supervisors and managers of these hospitality premises; (47 agreed to answer). No person was found smoking in 92% of all premises. However, "no smoking" signs did not conform to regulations in >70% of premises, and ashtrays were seen in 17% of enclosed premises. All supervisors and managers (100%) knew that smoking is banned in enclosed premises but <15% knew the fines liable to persons, respective owners of enclosed places, when a person smokes in an enclosed premise. Furthermore, 60% of supervisors were not aware that no smoking signs must comply with a specific regulation and 40% were not aware that ashtrays are not permitted in enclosed premises. In conclusion, the positive finding is that few persons smoke in restaurants, bars and discotheques, but the survey also showed that several aspects of regulations for tobacco control in enclosed premises are not well implemented. This calls for further information campaigns targeting both the public and the managers of hospitality premises, but also for strengthening enforcement measures, including fines for offenses. Scaling up comprehensive tobacco control measures, including full enforcement of clean air policy, is of paramount importance to meet the national target of 30% reduction of the smoking prevalence between 2010 and 2025.

Kipsin kiteytymiseen vaikuttavat tekijät ammoniumsulfaattikiteyttämön lämmönvaihtimissa

Työssä pyrittiin selvittämään syitä kipsin saostumiseen ammoniumsulfaattikiteyttämön putkilämmönvaihtimien pinnalle ja miten epätoivottua saostumista voitaisiin estää. Lämmönvaihtimissa virtaa ammoniumsulfaattia, jossa on epäpuhtautena kalsiumia, joka saostuu pinnoille kalsiumsulfaattina. Kirjallisuusosassa tarkasteltiin kiteytymisen mekanismia ja kipsin kiteytymiseen vaikuttavia tekijöitä. Saostumien estoaineita ja niiden vaikutusta kipsin kiteytymiseen sekä kipsin liukoisuutta ammoniumsulfaattiliuoksessa käsiteltiin myös kirjallisuusosassa. Kipsin kiteytymiseen vaikuttavia tekijöitä selvitettiin laboratoriokokeilla, joissa pyrittiin simuloimaan lämmönvaihdinta lämpövastuksella. Laboratoriokokeissa kokeiltiin erilaisia saostuman estoaineita ja pyrittiin löytämään prosessiin mahdollisimman tehokas kipsin kiteytymisen estoaine. Lämmönvaihtimien toiminnan tehokkuutta eli muodostuneen saostuman vaikutusta lämmönsiirtymiseen tutkittiin veden luovuttaman lämpövirran avulla. Lämmönvaihtimien tukkeutumista selvitettiin putkien vaihdon tarpeen perusteella. Kalsiumpitoisuuden vaihteluja prosessivirroissa selvitettiin kalsiumtaseen avulla. Saostumiseen vaikuttavien tekijöiden lisäksi selvitettiin mistä ja kuinka paljon kalsiumia kulkeutuu prosessiin ja poistuu sieltä. Työn tarkoituksena oli löytää ratkaisu, jolla epätoivottua saostumista lämmönvaihdin-ten pinnoille pystyttäisiin vähentämään joko kemiallisesti tai muuttamalla prosessi-muuttujia. Kalsiumia havaittiin olevan eniten pelkistämön sisäisissä ammoniumsul-faattiliuoskierroissa. Kalsiumtaseen perusteella kalsiumia poistuu pelkistämöltä eniten kipsinä ammoniumsulfaattituotteen mukana. Laboratoriokokeissa havaittiin polykar-boksylaattien estävän kipsin kasvua parhaiten, joskin estoaineen oikealla annostuksel-la havaittiin olevan suuri vaikutus. Lämmönvaihtimien saostuman havaittiin olevan kipsin ja glauberiitin seos. Vaippapuolen luovuttamien lämpövirran arvojen perusteel-la pystyttiin seuraamaan putkien tukkeutumista.

Radial displacement of a fluid annulus in a rotating Hele-Shaw cell

The radial displacement of a fluid annulus in a rotating circular HeleShaw cell has been investigated experimentally. It has been found that the flow depends sensitively on the wetting conditions at the outer interface. Displacements in a prewet cell are well described by Darcy"s law in a wide range of experimental parameters, with little influence of capillary effects. In a dry cell, however, a more careful analysis of the interfacemotion is required; the interplay between a gradual loss of fluid at the inner interface, and the dependence of capillary forces at the outer interface on interfacial velocity and dynamic contact angle, result in a constant velocity for the interfaces. The experimental results in this case correlate in the form of an empirical scaling relation between the capillary number Ca and a dimensionless group, related to the ratio of centrifugal to capillary forces, which spans about three orders of magnitude in both quantities. Finally, the relative thickness of the coating film left by the inner interface is obtained as a function of Ca.

Questions of Scale in Economic Experiments

Questions of scale have received ample attention in physical scale modeling and experimentation, but have not been discussed with regard to economic experimentation. In this article I distinguish between two kinds of experiments, "generic" and "specific" experiments. Using a comparison between two experimental laboratory studies on the "posted price effect", I then show that scale issues become important in specific laboratory experiments because of the scaling down of time in the target market to laboratory dimensions. This entails choices in the material configuration of the experiment as well as role changes of experimental subjects. My discussion thus adds to recent literature on external validity and on the materiality of experiments.

Fast and economic immobilization methods described for non-commercial Pseudomonas lipases

There is an increasing interest to seek new enzyme preparations for the development of new products derived from bioprocesses to obtain alternative bio-based materials. In this context, four non-commercial lipases from Pseudomonas species were prepared, immobilized on different low-cost supports, and examined for potential biotechnological applications. Results: To reduce costs of eventual scaling-up, the new lipases were obtained directly from crude cell extracts or from growth culture supernatants, and immobilized by simple adsorption on Accurel EP100, Accurel MP1000 and Celite (R) 545. The enzymes evaluated were LipA and LipC from Pseudomonas sp. 42A2, a thermostable mutant of LipC, and LipI. 3 from Pseudomonas CR611, which were produced in either homologous or heterologous hosts. Best immobilization results were obtained on Accurel EP100 for LipA and on Accurel MP1000 for LipC and its thermostable variant. Lip I. 3, requiring a refolding step, was poorly immobilized on all supports tested ( best results for Accurel MP1000). To test the behavior of immobilized lipases, they were assayed in triolein transesterification, where the best results were observed for lipases immobilized on Accurel MP1000. Conclusions: The suggested protocol does not require protein purification and uses crude enzymes immobilized by a fast adsorption technique on low-cost supports, which makes the method suitable for an eventual scaling up aimed at biotechnological applications. Therefore, a fast, simple and economic method for lipase preparation and immobilization has been set up. The low price of the supports tested and the simplicity of the procedure, skipping the tedious and expensive purification steps, will contribute to cost reduction in biotechnological lipase-catalyzed processes.

Colony-colony interactions between highly invasive ants

Among invasive species, ants are a particularly prominent group with enormous impacts on native biodiversity and ecosystem functioning. Globalization and on-going climate change are likely to increase the rate of ant invasions in the future, leading to simultaneous introductions of several highly invasive species within the same area, Here, we investigate pairwise interactions among four highly invasive species, Linepithema humile,Lashis neglectus, Pheidole megacephala and Wasmannia auropunctata, at the whole colony level, using a laboratory set-up. :Each colony consisted of 300 workers and one queen. The number of surviving workers in the competing colonies was recorded daily over 7 weeks. We modelled the survival of each colony during pairwise colony interactions, using a nonlinear model characterizing the survival dynamics of each colony individually. The least dominant species was P. megacephala, which always went extinct. Interactions among the three other species showed more complex dynamics, rendering the outcome of the interactions less predictable. Overall, W auropunctata and L neglectus were the most dominant species. This study shows the importance of scaling up to the colony level in order to gain realism in predicting the outcome of multiple invasions.

Cost-effectiveness of Tenofovir / Emtricitabine / Efavirenz versus Zidovudine / Lamivudine / Efavirenz as fist-line regimens for the treatment of HIV-infected patients in low-income settings

The Highly Active Antiretroviral Therapy (HAART) is the combination of at least three antiretroviral compounds. The combination purpose is to reduce the likelihood of drug resistance. However in the long-term the resistance to the first-line combination occurs and leads to treatment failure. Thus, a second-line and even a third-line regimen are recommended in the long run. [...] [P. 5] The two treatment alternatives under comparison: Tenofovir (300 mg) CO-formulated with Emtricitabine (200 mg) and Efavirenz (600 mg) currently known under the brand name Atripla (R) was introduced in July 2006 in the United States market. The excellent safety profile and ease of use make this combination a perfect first-line regimen in low-income settings. Therefore, this treatment option was recommended in WHO 2006 reviewed guidelines. Unfortunately, Tenofovir and Emtricitabine compounds are still costly and not yet widely available. For a matter of simplification this regimen is referred in this report as "the recent" therapy. Initially, we had in mind to consider the most frequently used first-line regimen in low-income countries (Stavudine / Larnivudme / Nevirapine) as a comparator for this economic evaluation. Unfortunately, according to the literature review results (see Annex 3); there was no data available comparing head to head the effectiveness of this regimen with the recent one. Instead, we selected a less frequently but commonly used first-line regimen in low-income countries as a comparator: Zidovudine, Lamivudine, Efavirenz. This combination has extensive experience in durability, safety and toxicity and seems to be an optimal choice for a first-line regimen according to the clinical trial group 384 team. Furthermore, Zidovudine, one of the compounds of this combination is now recommended as one of the preferred NNRTI [Non Nucleoside Reverse Transcriptase Inhibitors] options to be considered by countries instead of Stavudine (the most used NNRTI in limited-income countries). As this combination has been included in the WHO guidelines as a first-line therapy since 2003 when WHO launched the "3 by 5" scaling-up initiative, this combination of drugs is referred in this report as the "old" therapy. Objectives: The primary objective of this economic evaluation is to compare the two first-line HAARTs introduced above, in a low-income setting context. Both of these combinations are recommended by the 2006 WHO guidelines as potential first-line regimens. The secondary objective is to provide a simplified and comprehensible cost-effectiveness modeling tool in order to help policy makers, in resource-limited settings, make decisions about which first-line HAART to fund using the scarce resources available. [P. 6-7]

Sticky income inequality in the Spanish transition (1973-1990)

This paper investigates the evolution of income inequality in Spain during its transition to democracy, suggesting a method for the correction of under-reporting of earnings and profits in the Household Budget Surveys’ data. The contribution is twofold: the methodological proposal, based on income expenditure discrepancy and scaling-up to National Accounts, improves on previous work, and can be convenient for similar historical sources in other countries. Secondly, its application results in an alternative history of the distribution of income in this case, changing the levels and also the observed trend. Previous literature asserted a substantial equalization, related to the democratization process, while after the adjustment inequality in disposable income is shown to have been quite persistent.

Vertailuanalyysin käyttö termohydraulisten koelaitteistojen tulosten laitosmittakaavaan skaalautumisen tutkimisessa

Työn tavoitteena oli tarkastella termohydraulisten koelaitteistojen skaalauksessa käytettäviä periaatteita ja menettelyjä sekä vertailla Apros-simulaattoriohjelmalla laskettuja kanden koelaitteistomallin ja EPR-mallin tuloksia. Tarkoituksena oli saada käsitys siitä, miten hyvin tarkastellut koelaitteistot kuvaavat EPR-Iaitostyypin käyttäytymistä onnettomuustilanteessa. Malleilla tutkittiin jäähdytteen määrän vaikutusta primääripiirin käyttäytymiseen. Koelaitteistomallien tuloksissa toistuvat samat ilmiöt kuin EPR-mallin tuloksissa. Laskettuja PKL-koelaitteistomallin tuloksia vertailtiin myös koelaitteistolla suoritettuun kokeeseen. PKL-mallin todettiin toistavan hyvin kokeen tulokset. Koelaitteistojen tuloksien perusteella kelpoistetaan laskentaohjelmia, joita käytetään ydinvoimalaitosten turvallisuustutkimuksessa. Erityistä harkintaa tulee käyttää koelaitteistojen tulosten hyödyntämisessä, sillä mittakaava vaikuttaa ilmiöiden esiintymiseen.