SUGARCANE BAGASSE PULPING and BLEACHING: THERMAL and CHEMICAL CHARACTERIZATION

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Obtenção de polímeros graftizados de quitosana e estudo das propriedades físico-químicas para aplicação na indústria do petróleo

Chitosan is a biopolymer derived from the shells of crustaceans, biodegradable, inexpensive and renewable with important physical and chemical properties. Moreover, the different modifications possible in its chemical structure generate new properties, making it an attractive polysaccharide owing to its range of potential applications. Polymers have been used in oil production operations. However, growing concern over environmental constraints has prompted oil industry to search for environmentally sustainable materials. As such, this study sought to obtain chitosan derivatives grafted with hydrophilic (poly(ethylene glycol), mPEG) and/or hydrophobic groups (n-dodecyl) via a simple (one-pot) method and evaluate their physicochemical properties as a function of varying pH using rheology, small-angle Xray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. The chitosan derivatives were prepared using reductive alkylation under mild reaction conditions and the chemical structure of the polymers was characterized by nuclear magnetic resonance (1H NMR) and CHN elemental analysis. Considering a constant mPEG/Chitosan molar ratio on modification of chitosan, the solubility of the polymer across a wide pH range (acidic, neutral and basic) could only be improved when some of the amino groups were submitted to reacetylation using the one-pot method. Under these conditions, solubility is maintained even with the simultaneous insertion of n-dodecyl. On the other hand, the solubility of derivatives obtained only through mPEG incorporation using the traditional methodology, or with the ndodecyl group, was similar to that of its precursor. The hydrophilic group promoted decreased viscosity of the polymer solutions at 10 g/L in acid medium. However, at basic pH, both viscosity and thermal stability increased, as well as exhibited a pronounced pseudoplastic behavior, suggesting strong intermolecular associations in the alkaline medium. The SAXS results showed a polyelectrolyte behavior with the decrease in pH for the polymer systems. DLS analyses revealed that although the dilute polymer solutions at 1 g/L and pH 3 exhibited a high density of protonated amino groups along the polymer chain, the high degree of charge contributed significantly to aggregation, promoting increased particle size with the decrease in pH. Furthermore, the hydrophobic group also contributed to increasing the size of aggregates in solution at pH 3, whereas the hydrophilic group helped reduce their size across the entire pH range. Nevertheless, the nature of aggregation was dependent on the pH of the medium. Zeta potential results indicated that its values do not depend solely on the surface charge of the particle, but are also dependent on the net charge of the medium. In this study, water soluble associative polymers exhibit properties that can be of great interest in the petroleum industry

Inter-relação da produtividade de madeira do pinus com atributos físico-químicos de um latossolo do cerrado brasileiro

Com relação aos atributos do solo, a produtividade de madeira do pinus varia substancialmente em função do pH, do teor de matéria orgânica e da resistência à penetração. No ano de 2007, no Município de Selvíria (MS) foi analisada a produtividade de madeira do Pinus caribaea var. hondurensis, em função de alguns atributos físico-químicos de um Latossolo Vermelho Distrófico estabelecido num maciço florestal com 21 anos de idade. O objetivo foi selecionar, entre os atributos pesquisados do solo, aquele que melhor se apresentasse para explicar a variabilidade da produtividade de madeira. Para tanto, foi instalado um grid geoestatístico, para a coleta dos dados do solo e da planta, contendo 121 pontos amostrais, numa área de 3 ha do referido maciço. A produtividade de madeira variou diretamente com o pH do solo, tanto linear quanto espacialmente, com valores de 27,0-32,6 m³ ha-1 ano-1 e 3,9-4,4, respectivamente. Nos maiores, 32,6-36,9 m³ ha-1 ano-1 e 4,4-4,9. Dessa forma, o pH revelou ser um apreciável indicador da qualidade química do solo quando o objetivo foi estimar, linear e espacialmente, a produtividade de madeira da essência florestal pesquisada nas condições do Cerrado brasileiro do Sudeste do Estado do Mato Grosso do Sul.

Nutritional and chemical composition of culinary-medicinal Royal Sun Agaricus (the Himematsutake mushroom) Agaricus brasiliensis S. Wasser et al. (agaricomycetideae)

The objective of the study was to determine the nutritional and chemical composition (carbohydrates, proteins, lipids, calcium, and iron), water and ash content, and the caloric value of powdered fruiting bodies from six strains and from a mixture of strains of the culinary-medicinal mushroom Agaricus brasiliensis. The Kruskal-Wallis nonparametric and multiple comparisons tests and the Pearson correlation coefficient were used, with a 5% significance level. First, the results showed that strain 99/30 had a similar nutritional composition to the mixed sample. Second, when comparing strain nutrients to the mixture nutrients, the highest levels of carbohydrates, proteins, and calcium were in strain 99/25, and the highest levels of lipids were in strains 97/11, 99/28, and 99/30. Strain 99/30 was highest both in caloric value and moisture content. Finally, the mixture was established as a good source of macronutrients and micronutrients, and strain 99/30 was the closest to the mixture in nutritional composition.

Suicidality in Obsessive-Compulsive Disorder: Prevalence and Relation to Symptom Dimensions and Comorbid Conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hazards in non-pasteurized milk on retail sale in Brazil: prevalence of Salmonella spp, Listeria monocytogenes and chemical residues

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vida útil e qualidade de frutos de tomateiros tratados com paclobutrazol

A aplicação de reguladores de crescimento pode influenciar todas as fases do desenvolvimento de uma planta, incluindo o florescimento, o desenvolvimento e a maturação de frutos e sementes. Assim, avaliaram-se as principais características físicas e químicas e a vida útil dos frutos de tomate obtidos de plantas tratadas com paclobutrazol - PBZ (0, 50 e 100 mg L-1), via rega de mudas, aos 15 dias após a semeadura. Os frutos foram analisados imediatamente após a colheita e aos cinco, 10, 15 e 20 dias de armazenamento, em condições ambientes. A eficiência dos tratamentos e a qualidade dos frutos foram determinadas por meio da perda de matéria fresca, firmeza da polpa, teores de sólidos solúveis (SS), acidez titulável (AT), vitamina C e relação SS/AT. Adotou-se o delineamento experimental inteiramente casualizado, em esquema fatorial 3 x 5 (três concentrações de paclobutrazol x cinco períodos de armazenamento em temperatura ambiente). As aplicações de paclobutrazol em mudas de tomateiro, aos 15 dias após a semeadura, nas concentrações de 50 e 100 mg L-1, não alteraram a vida útil dos frutos do tomate longa vida AF 7631. O aumento das concentrações de PBZ resultou em menor perda de matéria fresca dos frutos e sua menor firmeza e acidez. Os teores de sólidos solúveis e de vitamina C e a relação SS/AT não se alteraram com o aumento das concentrações de PBZ. Os frutos, independentemente das concentrações de PBZ aplicadas às mudas, chegaram aos 20 dias de armazenamento (25 ± 2 ºC e 75 ± 5% UR) em condições para consumo, mesmo tendo perdido significativa quantidade de matéria fresca, acidez e firmeza.

Longitudinal study of the influence of removable partial denture and chemical control on the levels of Streptococcus mutans in saliva

Some studies have evaluated the salivary levels of mutans streptococci (MS) in removable partial denture (RPD) users. Saliva samples (2.0 mL) were obtained from 31 patients in six periods: (T0): immediately before installation of RPD; (T8): 8 days after T0; (T48): 48 days after T0; (T92): 92 days after T0; (T140): 140 days after T0 and (T189): 189 days after T0. The samples were vortexed and serially diluted from 10(-1) to 10(-6) in 0.05 m phosphate buffer (pH 7.4). From each dilution, 0.025 mL was plated on Mitis Salivarius Bacitracin (MSB). The plates were incubated in 5% CO2 at 37 degreesC for 72 h. There was an increase (t -test, P < 0.05) in the number of MS between periods T0 and T48 (mean/s.d., CFU mL(-1) of saliva): T0: 2.26/4.43 x 10(6) and T48: 0.47/1.48 x 10(8) . After this, intensive treatment with CHX was accomplished in 29 patients. Saliva samples were obtained after treatment in four periods: (T24 h): 24 h after T0; (T14): 14 days after T24 h; (T28): 28 days after T24 h, and (T63): 63 days after T24 h. The number of MS in saliva did not decrease (t -test, P > 0.05). A new CHX formulation was applied in 15 patients. Saliva samples were obtained in periods: (T0): before new CHX application; (T24 h): 24 h after T0 and (T82): 82 days after T0. The new CHX reduced MS levels in saliva: (mean/s.d., CFU mL(-1) of saliva): T0: 6.64/8.47 x 10(6) and T24 h: 3.2/4.27 x 10(5) (sign rank, P < 0.05). In conclusion, there was a significant increase in the number of MS in saliva after the installation of RPD. The intensive treatment with a properly formulated CHX was effective in the reduction of MS, between 24 h and 82 days after its application.

Evaluation of the Shore A Hardness of Silicone for Facial Prosthesis as to the Effect of Storage Period and Chemical Disinfection

The failure of facial prostheses is caused by limitations in the properties of existing materials, especially flexibility and durability. Therefore, this study evaluated the Shore A hardness of silicone used for fabrication of facial prostheses, Silastic MDX4-4210, according to the influence of storage period, daily disinfection, and 2 types of pigmentation. Thirty specimens were fabricated and divided in 3 groups: colorless, pigmented with makeup, and pigmented with iron oxide. Analysis of results was assessed on a Shore A hardness meter immediately, 6 months, and 1 year after fabrication of specimens, following the guidelines of the American Society for Testing and Materials. The hardness values were statistically analyzed by the Tukey test. The silicone exhibited an increase in hardness with time. However, the hardness was stable from 6 months to 1 year. It was concluded that the silicone is within the values of Shore A hardness reported in the literature, regardless of the storage period, pigmentation, and chemical disinfection.

Effect of electrolytic and chemical lesion by ibotenic acid of the septal area on water and salt intake

Water and sodium chloride intake was studied in male Holtzman rats weighing 250-300 g that had been subjected to electrolytic and chemical lesions of the septal area (SA). Water intake increased in animals with electrolytic lesion of the SA bilaterally from 169.37 +/- 8.55 (sham) to 214.87 +/- 23.10 ml/5 days (lesioned). Water intake decreased after ibotenic acid lesion of the SA from 229.33 +/- 27.60 to 127.33 +/- 22.84 ml/5 days. Sodium chloride intake (1.5%) increased in animals with electrolytic lesion of the SA from 10.0 +/- 1.73 to 15.5 +/- 1.95 ml/5 days after lesion. Also sodium chloride (1.5%) intake increased after ibotenic acid injection into the SA to a greater extent (from 7.83 +/- 1.25 to 14.33 +/- 1.87 ml/5 days). The results indicate that the water intake response may be due to lesions that involve cell bodies and fibers of passage and that the sodium intake response can also be induced by lesions which involve only cell bodies. Finally, these results led us to conclude that the SA uses its cell bodies and afferent bodies and fibers for processing inputs mediating water intake and salt appetite and that the cells bodies of the SA are implicated in increased water intake. (C) 1998 Elsevier B.V.

Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization

Denture fractures are common in daily practice, causing inconvenience to the patient and to the dentists. Denture repairs should have adequate strength, dimensional stability and color match, and should be easily and quickly performed as well as relatively inexpensive. Objective: The aim of this study was to evaluate the flexural strength of acrylic resin repairs processed by different methods: warm water-bath, microwave energy, and chemical polymerization. Material and methods: Sixty rectangular specimens (31x10x2.5 mm) were made with warm water-bath acrylic resin (Lucitone 550) and grouped (15 specimens per group) according to the resin type used to make repair procedure: 1) specimens of warm water-bath resin (Lucitone 550) without repair (control group); 2) specimens of warm water-bath resin repaired with warm water-bath; 3) specimens of warm water-bath resin repaired with microwave resin (Acron MC); 4) specimens of warm water-bath resin repaired with autopolymerized acrylic resin (Simplex). Flexural strength was measured with the three-point bending in a universal testing machine (MTS 810 Material Test System) with load cell of 100 kgf under constant speed of 5 mm/min. Data were analyzed statistically by Kruskal-Wallis test (p<0.05). Results: The control group showed the best result (156.04 +/- 1.82 MPa). Significant differences were found among repaired specimens and the results were decreasing as follows: group 3 (43.02 +/- 2.25 MPa), group 2 (36.21 +/- 1.20 MPa) and group 4 (6.74 +/- 0.85 MPa). Conclusion: All repaired specimens demonstrated lower flexural strength than the control group. Repairs with autopolymerized acrylic resin showed the lowest flexural strength.

Leaf trait variation on Erythroxylum tortuosum (Erythroxylaceae) and its relationship with oviposition preference and stress by a host-specific leaf miner

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composição e distribuição dos Crustácea (Decapoda) na Lagoa do Peixe, Rio Grande do Sul, Brasil

The Lagoa do Peixe (Peixe's Lagoon) is located between Atlantic Ocean and Lagoa dos Patos and is 30 Km long and 0,5-2,0 Km wide (31º13'S, 50º55'W -31º26'S, 51º09'). For one year, the composition and distribution of Crustácea Decapoda were analyzed monthly (from July/1994 to June/1995), in seven subareas (terrestrial border and aquatic area) and physical and chemical parameters (depth, salinity, sediment texture, oxygen in water, organic material of sediment and water temperature) were registered. Decapoda from the families Grapsidae, Ocypodidae, Portunidae (Brachyura), Diogenidae (Anomura) and Penaeidae (Penaeidea) were captured. Chasmagnathus granulata Dana 1851 was found ali months near the canal connecting Atlantic Ocean and Lagoa do Peixe, but inside the lagoon it was collected only in October/94 and June/95, and in extreme subareas it was sampled in February/95 when the salinity was 31 at these sites. Callinectes sapidus Rathbun, 1896 and Cyrtograpsus angulatus Dana, 1851 were captured throughout the year, except October/94 and April/95, respectively. Both species were found in ali áreas of sample, indicating a high plasticity in relation to the factors analyzed in this study. Another species captured probably come in the lagoon in specific months, when the environment provides ideal conditions for their develo-pments.

Ultrastructure of last larval instar fat body cells of Pachycondyla (= Neoponera) villosa (Formicidae : Ponerinae): cytochemical and chemical analysis

The ultrastructure of the fat body cells (trophocytes) of the last larval instar of Pachycondyla (= Neoponera) villosa is presented. The cytoplasm is restricted to the cell periphery and to the smaller strips among the vacuoles, protein granules, lipid droplets, and around the nucleus. Cytochemically, the presence of basic amino acids in the protein granules and in the nuclei was observed by using the ethanolic phosphotungstic acid technique (EPTA). The lipid droplets stained for unsaturated lipids. This result was further confirmed by gas chromatography and mass spectrometry, where the unsaturated fatty acids were identified as oleic and linoleic acids together with saturated fatty acids such as palmitic and stearic acid. Carbohydrates (glycogen) were also detected in the fat body. The glycogen is present as beta particles distributed among the lipid droplets and sometimes attached to them.

Relationship among Apis mellifera L. stings, swarming and climate conditions in the city of Rio Claro, SP, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)