957 resultados para 320.01
A comparative study of the physical properties of conventional and Grander-modified adhesive systems
Resumo:
Purpose: The objective of this study was to evaluate the influence of the Grander technology in reducing the surface tension and contact angle of a self-etch adhesive system. Methods: Distilled water and Xeno III self-etch adhesive system (Dentsply) were modified by physical contact with the Flexible unit Grander system to revitalize water, for 48 hours, resulting in four groups: Group 1 - Xeno III under normal conditions; Group 2 - Xeno III modified by Grander; Group 3 - distilled water under normal conditions; Group 4 - distilled water system modified by the Grander system;. Surface tension and contact angle (dentin substrate and titanium plate) of the adhesive system and water in normal and Grander-modified conditions was measured with a goniometer. Data were analyzed by ANOVA and Tukey test (5%). Results: Grander technology reduced the surface tension of water but not of the adhesive system Xeno III. The contact angle property of the adhesive ystem was not affected. Conclusion: Grander technology did not interfere with the surface tension and contact angle physical properties of the Xeno III self-etch adhesive system. Copyright: © 2011 Gonçalves et al.;.
Resumo:
Incluye Bibliografía
Resumo:
Data from a multibreed commercial flock located at Mid-West of Brazil, supported by Programa de Melhoramento Genético de Caprinos e Ovinos de Corte (GENECOC), were used to estimate genetic parameters of traits related to ewe productivity by Average Information Restricted Maximum Likelihood method applied to an animal model. The analyzed traits were litter weight at birth (LWB) and at weaning (LWW), ewe weight at weaning (EW) and ewe production efficiency, estimated by WEE=LWW/EW 0.75. The heritabilities were 0.26±0.05, 0.32±0.06, 0.37±0.03 and 0.10±0.02 for LWB, LWW, EW and WEE, respectively. Significant effects for direct heterosis were observed for LWW and EW. Recombination losses were important for EW and WEE. Genetic correlations of LWB with LWW, EW and WEE were 0.68, 0.37 and 0.15, respectively; of LWW with EW and WEE were 0.30 and 0.34, respectively; and between EW and WEE was -0.25. Even though it is a low heritability trait, WEE can be indicated as a selection criteria for improving the ewe productivity without increasing the mature weight of animals due to its genetic correlations with LWW and other traits. © 2011 Elsevier B.V.
Resumo:
This study aimed to evaluate the effects of adding different concentrations of the leaf additives nandrolone decanoate, ascorbic acid, retinol palmitate and retinol acetate on biological parameters of Bombyx mori larvae. The results showed that nandrolone and ascorbic acid, both at 0.5%, provide the best value for the development of the larvae of B. mori, values which do not correspond to significant increases in cocoon and silk production; 1.0% of retinol palmitate show negative effect to larvae development.
Resumo:
The radioactivity due to 238U and 234U in three aquifer systems occurring within the Paraná sedimentary basin, South America, has been investigated. Uranium is much less dissolved from fractured igneous rocks than from the porous sedimentary rocks as indicated by the U-mobility coefficients between 7. 6 × 10-6 and 1. 2 × 10-3 g cm-3. These values are also compatible with the U preference ratios relative to Na, K, Ca, Mg and SiO2, which showed that U is never preferentially mobilized in the liquid phase during the flow occurring in cracks, fissures, fractures and faults of the igneous basaltic rocks. Experimental dissolution of diabase grains on a time-scale laboratory has demonstrated that the U dissolution appeared to be a two-stage process characterized by linear and second-order kinetics. The U dissolution rate was 8 × 10-16 mol m-2 s-1 that is within the range of 4 × 10-16-3 × 10-14 mol m-2 s-1 estimated for other rock types. The 234U/238U activity ratio of dissolved U in solutions was higher than unity, a typical result expected during the water-rock interactions when preferential 234U-leach from the rock surfaces takes place. Some U-isotopes data allowed estimating 320 ka for the groundwater residence time in a sector of a transect in São Paulo State. A modeling has been also realized considering all U-isotopes data obtained in Bauru (35 samples), Serra Geral (16 samples) and Guarani (29 samples) aquifers. The results indicated that the Bauru aquifer waters may result from the admixture of waters from Guarani (1. 5 %) and Serra Geral (98. 5 %) aquifers. © 2012 Springer-Verlag.
Resumo:
Objective: Peripheral treatment with the cholinergic agonist pilocarpine increases salivary gland blood flow and induces intense salivation that is reduced by the central injection of moxonidine (aα-adrenoceptors/ imidazoline agonist). In the present study, we investigated the effects of the intracerebroventricular (i.c.v.) injection of pilocarpine alone or combined with moxonidine also injected i.c.v. On submandibular/sublingual gland (SSG) vascular resistance. In addition, the effects of these treatments on arterial pressure, heart rate and on mesenteric and hindlimb vascular resistance were also tested. Design: Male Holtzman rats with stainless steel cannula implanted into lateral ventricle and anaesthetized with urethane + α-chloralose were used. Results: Pilocarpine (500 nmol/1 μl) injected i.c.v. Reduced SSG vascular resistance and increased arterial pressure, heart rate and mesenteric vascular resistance. Contrary to pilocarpine alone, the combination of moxonidine (20 nmol/1 μl) and pilocarpine injected i.c.v. Increased SSG vascular resistance, an effect abolished by the pre-treatment with the α2-adrenoceptor antagonist yohimbine (320 nmol/2 μl). The increase in arterial pressure, heart rate and mesenteric resistance was not modified by the combination of moxonidine and pilocarpine i.c.v. Conclusion: These results suggest that the activation of central α2- adrenoceptors may oppose to the effects of central cholinergic receptor activation in the SSG vascular resistance. © 2012 Elsevier Ltd. All rights reserved.
Resumo:
The objective of this study was to define production environments by grouping different environmental factors and, consequently, to assess genotype by production environment interactions on weaning weight (WW) in the Angus populations of Brazil and Uruguay. Climatic conditions were represented by monthly temperature means (°C), minimum and maximum temperatures in winter and summer respectively and accumulated rainfall (mm/year). Mode in month of birth and weaning, and calf weight (kg) and age (days) at weaning were used as indicators of management conditions of 33 and 161 herds in 13 and 34 regions in Uruguay and Brazil, respectively. Two approaches were developed: (a) a bi-character analysis of extreme sub-datasets within each environmental factor (bottom and top 33% of regions), (b) three different production environments (including farms from both countries) were defined in a cluster analysis using standardized environmental factors. To identify the variables that influenced the cluster formation, a discriminant analysis was previously carried out. Management (month, age and weight at weaning) and climatic factors (accumulated rainfalls and winter and summer temperatures) were the most important factors in the clustering of farms. Bi or trivariate analyses were performed to estimate heritability and genetic correlations for WW in extreme sub-datasets within environmental factor or between clusters, using MTDFREML software. Heritability estimates of WW in the first approach ranged from 0.27 to 0.54, and genetic correlations between top and bottom sub-datasets within environmental factors, from -0.29 to 0.70. In the cluster approach, heritabilities were 0.58±0.04 for cluster 1, 0.31±0.01 for Cluster 2 and 0.40±0.02 for Cluster 3. Genetic correlations were 0.27±0.08, 0.32±0.09 and 0.33±0.09, between clusters 1 and 2, 1 and 3, and 2 and 3, respectively. Both approaches suggest the existence of genotype x environment interaction for weaning weight in Angus breed of Brazil and Uruguay. © 2012 Elsevier B.V.
Resumo:
Recent studies have evaluated many methods of internal fixation for sagittal split ramus osteotomy (SSRO), aiming to increase stability of the bone segments while minimizing condylar displacement. The purpose of this study was to evaluate, through biomechanical testing, the stability of the fixation comparing a specially designed bone plate to other two commonly used methods. Thirty hemimandibles were separated into three equal groups. All specimens received SSRO. In Group I the osteotomies were fixed with three 15 mm bicortical positional screws in an inverted-L pattern with an insertion angle of 90°. In Group II, fixation was carried out with a four-hole straight plate and four 6 mm monocortical screws. In Group III, fixation was performed with an adjustable sagittal plate and eight 6 mm monocortical screws. Hemimandibles were submitted to vertical compressive loads, by a mechanical testing unit. Averages and standard deviations were submitted to analysis of variance using the Tukey test with a 5% level of significance. Bicortical screws presented the greatest values of loading resistance. The adjustable miniplate demonstrated 60% lower resistance compared to bicortical screws. Group II presented on average 40% less resistant to the axial loading. © 2012 International Association of Oral and Maxillofacial Surgeons.
Resumo:
Incluye Bibliografía
Resumo:
The aim of the present study was to compare the degradation kinetics of low (1 mg L-1) and high (25 mg L-1) concentrations of ciprofloxacin (CIP) aiming to decrease the concentration of additives and evaluate the pH limitation by the use of low iron concentrations and organic ligands. A parameterized kinetic model was satisfactorily fitted to the experimental data in order to study the performance of photo-Fenton process with specific iron sources (iron citrate, iron oxalate, iron nitrate) under different pH medium (2.5, 4.5, 6.5). The process modeling allowed selecting those process conditions (iron source, additives concentrations and pH medium) which maximize the two performance parameters related to the global equilibrium conversion and kinetic rate of the process. For the high CIP concentration, degradation was very influenced by the iron source, resulting in much lower efficiency with iron nitrate. At pH 4.5, highest TOC removal (0.87) was achieved in the presence of iron citrate, while similar CIP conversions were obtained with oxalate and citrate (0.98 after 10 min). For the low CIP concentration, much higher conversion was observed in the presence of citrate or oxalate in relation to iron nitrate up to pH 4.5. This behavior denotes the importance of complexation also at low dosages. Appropriate additives load (320 μM H 2O2; 6 μM Fe) resulted in a CIP conversion of 0.96 after10 min reaction with citrate up to pH 4.5. © 2013 Elsevier B.V. All rights reserved.
Resumo:
The present work aimed to quantify the fatty acids in total lipids of Nile tilapia fingerlings (Oreochromis niloticus) fed with different sources of vegetable oils mechanically extracted. Were used 320 tilapias (O. niloticus) with average initial weight and average total initial length of 2.55±0.57 g and 5.59±0.43 cm, respectively, fed for a period of 60 days, in a randomized block design with eight treatments and four replications. The diets were prepared with 320 g/kg crude protein and 3.500 kcal of digestible energy per kg of feed enriched with eight different oils: sunflower, canola, sesame, linseed, peanut, Para's nut soy and macadamia, with an addition of 4%. Among the major fatty acids the oleic, palmitic, linolenic and linoleic were obtained in higher concentration (mg/g of LT) in fish from all treatments. The sums of polyunsaturated fatty acids after 60 days of cultivation had increased in all treatments compared to the 30 days of the experiment. This is due to the addition of oils with high contents of n-6 and n-3 fatty acids. The fatty acids in the carcass are a reflection of the energy source of oil used. As a conclusion it is recommended the use of linseed oil in the diet of tilapia fingerlings due to great improvement in the relationship between n-6/n-3.