Conformational analysis of the natural iron chelator myo-inositol 1,2,3-trisphosphate using a pyrene-based fluorescent mimic

myo-Inositol phosphates possessing the 1,2,3-trisphosphate motif share the remarkable ability to completely inhibit iron-catalysed hydroxyl radical formation. The simplest derivative, myo-inositol 1,2,3-trisphosphate [Ins(1,2,3)P3], has been proposed as an intracellular iron chelator involved in iron transport. The binding conformation of Ins(1,2,3)P3 is considered to be important to complex Fe3+ in a 'safe' manner. Here, a pyrene-based fluorescent probe, 4,6-bispyrenoyl-myo-inositol 1,2,3,5-tetrakisphosphate [4,6-bispyrenoyl Ins(1,2,3,5)P4], has been synthesised and used to monitor the conformation of the 1,2,3-trisphosphate motif using excimer fluorescence emission. Ring-flip of the cyclohexane chair to the penta-axial conformation occurs upon association with Fe3+, evident from excimer fluorescence induced by π-π stacking of the pyrene reporter groups, accompanied by excimer formation by excitation at 351 nm. This effect is unique amongst biologically relevant metal cations, except for Ca 2+ cations exceeding a 1:1 molar ratio. In addition, the thermodynamic constants for the interaction of the fluorescent probe with Fe3+ have been determined. The complexes formed between Fe 3+ and 4,6-bispyrenoyl Ins(1,2,3,5)P4 display similar stability to those formed with Ins(1,2,3)P3, indicating that the fluorescent probe acts as a good model for the 1,2,3-trisphosphate motif. This is further supported by the antioxidant properties of 4,6-bispyrenoyl Ins(1,2,3,5)P4, which closely resemble those obtained for Ins(1,2,3)P3. The data presented confirms that Fe3+ binds tightly to the unstable penta-axial conformation of myo-inositol phosphates possessing the 1,2,3-trisphosphate motif. © 2010 The Royal Society of Chemistry.

Granulometry of surface sediments from the Panama Basin (Table 2, 3)

Panama Basin sediment surface coarse fractions are dominantly composed of planktonic foraminiferal remains. Textural studies of these coarse fractions by means of a large diameter settling tube system reveal characteristics grain size spectra with important modes at 2.0-2.25 phi, 2.3-2.45 phi, 2.5-2.75 phi, 3.0-33 phi, and 3.4-3.75 phi. The coarser modes consist of large Globoquadrina dutertrei and Globorotalia menardii shells, the finer ones of small planktonic foraminiferal species and of shell fragments of the larger species. Analyses of samples from the Carnegie Gap provide sufficient information such that the extent of the high energy environment close to the sill depth can be mapped; the textural analyses also seem to indicate south and northward flowing components of the bottom currents which transport particle assemblages with distinct textural characteristics. The samples bear evidence for large scale removal of calcareous fines from the crest of structural highs; the fines are then dumped on the flanks of these elevations.

(Table 2-3) Radiocarbon datings of organic matter from sediments of Core PSh-4510

Core PSh-2510 (4.76 m long) recovered mud and clay of the Baltic Ice Lake and of all subsequent stages of the Baltic Sea. Grain size, mineral and chemical compositions, as well as physical properties of sediments were studied. Biostratigraphic (diatoms and foraminifers), lithostratigraphic, and chemical (26 elements) methods, as well as radiocarbon datings were used to subdivide core sections into stratigraphic units.

Crystal structure of 1-benzylsulfonyl-1,2,3,4-tetrahydroquinoline

Peer reviewed

Pentecôte et langues de feu : analyse structurelle et interprétation d’Actes des Apôtres 2,3

Le récit de la Pentecôte (Actes des Apôtres 2) présente au lecteur un élément particulier qui se retrouve rarement dans le canon biblique : les « langues comme de feu ». Seuls les passages d’Isaïe 5,24 et Actes 2,3 utilisent cette expression; pourtant, leurs contextes diffèrent largement. Nous trouvons certains commentaires rabbiniques et fragments de rouleaux de la Mer Morte qui emploient cette même expression, et la littérature gréco-romaine utilise une image similaire où un feu divin se pose sur la tête de certains personnages. Puisque la fonction de cet élément diffère d’un ouvrage littéraire à un autre, comment devons-nous interpréter les langues de feu dans le récit de la Pentecôte? Les commentaires bibliques qui examinent cet élément proposent différentes hypothèses sur la symbolique des langues de feu. Afin de répondre à cette problématique, nous commencerons notre étude avec une présentation sur l’état de la question et des approches synchroniques utilisées. Nous présenterons ensuite l’analyse structurelle du récit de la Pentecôte afin de percevoir la place que notre expression occupe dans cette péricope. Au chapitre trois, nous ferons une analyse grammaticale de notre segment afin de voir la fonction grammaticale de l’expression, et présenter une recension des ouvrages hébraïques et gréco-romains qui utilisent cette expression ou une image similaire. Enfin, l’analyse philologique des termes γλῶσσα et πῦρ sera élaborée et comparée à l’utilisation retrouvée dans le livre des Actes des Apôtres. Subséquemment, nous serons en mesure de porter un regard critique sur quelques interprétations proposées afin de percevoir que la mise en réseau structurel du membre γλῶσσαι ὡσεὶ πυρός, avec les termes répétitifs et synonymiques du récit, nous orientent à percevoir l’accomplissement de la promesse du Saint-Esprit, qui à son tour habilite le croyant à réaliser la mission donnée : la proclamation du message christologique à toutes les ethnies.

Le rôle du motif hydrophobe VAVIM situé au niveau de IVS6 dans les mécanismes d'activation et d'inactivation du canal calcique Caᵥ2.3

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Le rôle du motif hydrophobe VAVIM situé au niveau de IVS6 dans les mécanismes d'activation et d'inactivation du canal calcique Ca�2.3

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Tab. 1+2+3: Selected principal soil properties in the oil exploitation region of KomiArcticOil (Usinsk) in the Russian tundra

Oil polluted and not oil polluted soils (crude oil hydrocarbons contents: 20-92500 mg/kg dry soil mass) under natural grass and forest vegetation and in a bog in the Russian tundra were compared in their principal soil ecological parameters, the oil content and the microbial indicators. CFE biomass-C, dehydrogenase and arylsulfatase activity were enhanced with the occurrence of crude oil. Using these parameters for purposes of controlling remediation and recultivation success it is not possible to distinguish bctween promotion of microbial activity by oil carbon or soil organic carbon (SOC). For this reason we think that these parameters are not appropriate to indicate a soil damage by an oil impact. In contrast the metabolie quotient (qC02), calculated as the ratio between soil basal respiration and the SIR biomass-C was adequate to indicate a high crude oil contamination in soil. Also, the ß-glucosidase activity (parameter ß-GL/SOC) was correlated negatively with oil in soil. The indication of a soil damage by using the stress parameter qCO, or the specific enzyme activities (activity/SOC) minimizes the promotion effect of the recent SOC content on microbial parameters. Both biomass methods (SIR, CFE) have technical problems in application for crude oil-contaminated and subarctic soils. CFE does not reflect the low C_mic level of the cold tundra soils. We recommend to test every method for its suitability before any data collection in series as well as application for cold soils and the application of ecophysiological ratios as R_mic/C_mic, C_mic/SOC or enzymatic activity/SOC instead of absolute data.

Results of Closed-Flow Column Experiments (zip-archive 2.3 MB)

The identification of transport parameters by inverse modeling often suffers from equifinality or parameter correlation when models are fitted to observations of the solute breakthrough in column outflow experiments. This parameters uncertainty can be approached by the application of multiple experimental designs such as column experiments in open-flow mode and the recently proposed closed-flow mode. Latter are characterized by the recirculation of the column effluent into the solution supply vessel that feeds the inflow. Depending on the experimental conditions, the solute concentration in the solution supply vessel and the effluent follows a damped sinusoidal oscillation. As a result, the closed-flow experiment provides additional observables in the breakthrough curve. The evaluation of these emergent features allows intrinsic control over boundary conditions and impacts the uncertainty of parameters in inverse modeling. We present a comprehensive sensitivity analysis to illustrate the potential application of closed-flow experiments. We show that the sensitivity with respect to the apparent dispersion can be controlled by the experimenter leading to a decrease in parameter uncertainty as compared to classical experiments by an order of magnitude for optimal settings. With these finding we are also able to reduce the equifinality found for situations, where rate-limited interactions impede a proper determination of the apparent dispersion and rate coefficients. Furthermore, we show the expected breakthrough curve for equilibrium and kinetic sorption, the latter showing strong similarities to the behavior found for completely mixed batch reactor experiments. This renders the closed-flow mode a useful complementary approach to classical column experiments.

Varianzanalysen - Prüfen der Voraussetzungen und nichtparametrische Methoden sowie praktische Anwendungen mit R und SPSS. Version 1.1 (2.3.2015)

Die Voraussetzunen der parametrischen 1- und mehrfaktoriellen Varianzanalyse, mit und ohne Messwiederholungen, werden besprochen. Ferner werden eine Reihe von alternativen Verfahren vorgestellt, insbesondere einige nichtparametrische, darunter RT (rank transform), INT (inverse normal transform), ART (aligned rank transform), Puri & Sen (L statistic), van der Waerden und Akritas & Brunner (ATS anova type statistic), die sich auf die parametrische Varianzanalyse zurückführen lassen, sowie dichotome und ordinale logistische Regression. Hierzu werden Lösungen mit R und SPSS ausführlich gezeigt.

Comparison of 2.3 & 5 mega pixel (MP) resolution monitors when detecting mammography image blurring

Background - Image blurring in Full Field Digital Mammography (FFDM) is reported to be a problem within many UK breast screening units resulting in significant proportion of technical repeats/recalls. Our study investigates monitors of differing pixel resolution, and whether there is a difference in blurring detection between a 2.3 MP technical review monitor and a 5MP standard reporting monitor. Methods - Simulation software was created to induce different magnitudes of blur on 20 artifact free FFDM screening images. 120 blurred and non-blurred images were randomized and displayed on the 2.3 and 5MP monitors; they were reviewed by 28 trained observers. Monitors were calibrated to the DICOM Grayscale Standard Display Function. T-test was used to determine whether significant differences exist in blurring detection between the monitors. Results - The blurring detection rate on the 2.3MP monitor for 0.2, 0.4, 0.6, 0.8 and 1 mm blur was 46, 59, 66, 77and 78% respectively; and on the 5MP monitor 44, 70, 83 , 96 and 98%. All the non-motion images were identified correctly. A statistical difference (p <0.01) in the blurring detection rate between the two monitors was demonstrated. Conclusions - Given the results of this study and knowing that monitors as low as 1 MP are used in clinical practice, we speculate that technical recall/repeat rates because of blurring could be reduced if higher resolution monitors are used for technical review at the time of imaging. Further work is needed to determine monitor minimum specification for visual blurring detection.