The line transect method for estimating densities of large mammals in a tropical deciduous forest: An evaluation of models and field experiments

We have evaluated techniques of estimating animal density through direct counts using line transects during 1988-92 in the tropical deciduous forests of Mudumalai Sanctuary in southern India for four species of large herbivorous mammals, namely, chital (Axis axis), sambar (Cervus unicolor), Asian elephant (Elephas maximus) and gaur (Bos gauras). Density estimates derived from the Fourier Series and the Half-Normal models consistently had the lowest coefficient of variation. These two models also generated similar mean density estimates. For the Fourier Series estimator, appropriate cut-off widths for analysing line transect data for the four species are suggested. Grouping data into various distance classes did not produce any appreciable differences in estimates of mean density or their variances, although model fit is generally better when data are placed in fewer groups. The sampling effort needed to achieve a desired precision (coefficient of variation) in the density estimate is derived. A sampling effort of 800 km of transects returned a 10% coefficient of variation on estimate for chital; for the other species a higher effort was needed to achieve this level of precision. There was no statistically significant relationship between detectability of a group and the size of the group for any species. Density estimates along roads were generally significantly different from those in the interior af the forest, indicating that road-side counts may not be appropriate for most species.

Water balance modelling in a tropical watershed under deciduous forest (Mule Hole, India): Regolith matric storage buffers the groundwater recharge process

Accurate estimations of water balance are needed in semi-arid and sub-humid tropical regions, where water resources are scarce compared to water demand. Evapotranspiration plays a major role in this context, and the difficulty to quantify it precisely leads to major uncertainties in the groundwater recharge assessment, especially in forested catchments. In this paper, we propose to assess the importance of deep unsaturated regolith and water uptake by deep tree roots on the groundwater recharge process by using a lumped conceptual model (COMFORT). The model is calibrated using a 5 year hydrological monitoring of an experimental watershed under dry deciduous forest in South India (Mule Hole watershed). The model was able to simulate the stream discharge as well as the contrasted behaviour of groundwater table along the hillslope. Water balance simulated for a 32 year climatic time series displayed a large year-to-year variability, with alternance of dry and wet phases with a time period of approximately 14 years. On an average, input by the rainfall was 1090 mm year(-1) and the evapotranspiration was about 900 mm year(-1) out of which 100 mm year(-1) was uptake from the deep saprolite horizons. The stream flow was 100 mm year(-1) while the groundwater underflow was 80 mm year(-1). The simulation results suggest that (i) deciduous trees can uptake a significant amount of water from the deep regolith, (ii) this uptake, combined with the spatial variability of regolith depth, can account for the variable lag time between drainage events and groundwater rise observed for the different piezometers and (iii) water table response to recharge is buffered due to the long vertical travel time through the deep vadose zone, which constitutes a major water reservoir. This study stresses the importance of long term observations for the understanding of hydrological processes in tropical forested ecosystems. (C) 2009 Elsevier B.V. All rights reserved.

Vegetation structure and floristic composition of a tropical dry deciduous forest in Bhadra Wildlife Sanctuary, Karnataka, India

A permanent 2 ha (200 m x 100 m) plot was established for long-term monitoring of plant diversity and dynamics in a tropical dry deciduous forest of Bhadra Wildlife Sanctuary, Karnataka, southern India. Enumeration of all woody plants >= 1 cm DBH (diameter at breast height) yielded a total of 1766 individuals that belonged to 46 species, 37 genera and 24 families. Combretaceae was the most abundant family in the forest with a family importance value of 68.3. Plant density varied from 20 - 90 individuals with an average 35 individuals/quadrat (20 m x 20 m). Randia dumetorum, with 466 individuals (representing 26.7 % of the total density 2 ha(-1)) with species importance value of 36.25, was the dominant species in the plot. The total basal area of the plot was 18.09 m(2) ha(-1) with a mean of 0.72 m(2) quadrat(-1). The highest basal area of the plot was contributed by Combretaceae (12.93 m(2) 2 ha(-1)) at family level and Terminalia tomentosa (5.58 m(2) 2 ha(-1)) at species level. The lowest diameter class (1-10 cm) had the highest density (1054 individuals 2 ha(-1)), but basal area was highest in the 80 - 90 cm diameter class (5.03m(2) 2 ha(-1)). Most of the species exhibited random or aggregated distribution over the plot. This study provides a baseline information on the dry forests of Bhadra Wildlife Sanctuary.

The effects of organic environmental toxicants on hard tissue formation in developing tooth : An in vitro study in mice

Dioxins are organic toxicants that are known to impair tooth development, especially dental hard tissue formation. The most toxic dioxin congener is 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Further, clinical studies suggest that maternal smoking during pregnancy can affect child s tooth development. One of the main components of tobacco smoke is the group of non-halogenated polycyclic aromatic hydrocarbons (PAHs), a representative of which is 7,12-dimethylbenz[a]anthracene (DMBA). Tributyltin (TBT), an organic tin compound, has been shown to impair bone mineralization in experimental animals. In addition to exposure to organic toxicants, a well-established cause for enamel hypomineralization is excess fluoride intake. The principal aim of this thesis project was to examine in vitro if, in addition to dioxins, other organic environmental toxicants, like PAHs and organic tin compounds, have adverse effects on tooth development, specifically on formation and mineralization of the major dental hard tissues, the dentin and the enamel. The second aim was to investigate in vitro if fluoride could intensify the manifestation of the detrimental developmental dental effects elicited by TCDD. The study was conducted by culturing mandibular first and second molar tooth germs of E18 NMRI mouse embryos in a Trowell-type organ culture and exposing them to DMBA, TBT, and sodium fluoride (NaF) and/or TCDD at various concentrations during the secretory and mineralization stages of development. Specific methods used were HE-staining for studying cell and tissue morphology, BrdU-staining for cell proliferation, TUNEL-staining for apoptosis, and QPCR, in situ hybridization and immunohistochemistry for the expressions of selected genes associated with mineralization. This thesis work showed that DMBA, TBT, TCDD and NaF interfere with dentin and enamel formation of embryonic mouse tooth in vitro, and that fluoride can potentiate the harmful effect of TCDD. The results suggested that adverse effects of TBT involve altered expression of genes associated with mineralization, and that DMBA and TBT as well as NaF and TCDD together primarily affect dentin mineralization. Since amelogenesis does not start until mineralization of dentin begins, impaired enamel matrix secretion could be a secondary effect. Dioxins, PAHs and organotins are all liposoluble and can be transferred to the infant by breast-feeding. Since doses are usually very low, developmental toxicity on most of the organs is difficult to indentify clinically. However, tooth may act as an indicator of exposure, since the major dental hard tissues, the dentin and the enamel, are not replaced once they have been formed. Thus, disturbed dental hard tissue formation raises the question of more extensive developmental toxicity.

Leaf flushing phenology and herbivory in a tropical dry deciduous forest, southern India

Patterns of leaf-flushing phenology of trees in relation to insect herbivore damage were studied at two sites in a seasonal tropical dry forest in Mudumalai, southern India, from April 1988 to August 1990. At both sites the trees began to flush leaves during the dry season, reaching a peak leaf-flushing phase before the onset of rains. Herbivorous insects emerged with the rains and attained a peak biomass during the wet months. Trees that flushed leaves later in the season suffered significantly higher damage by insects compared to those that flushed early or in synchrony during the peak flushing phase. Species whose leaves were endowed with physical defenses such as waxes suffered less damage than those not possessing such defenses. There was a positive association between the abundance of a species and leaf damage levels. These observations indicate that herbivory may have played a major role in moulding leaf flushing phenology in trees of the seasonal tropics.

Long term monitering of vegetation in a tropical deciduous forest in Mudumalai,southern India

As part of an international network of large plots to study tropical vegetation dynamics on a long-term basis, a 50-hectare permanent plot was set up during 1988-89 in the deciduous forests of Mudumalai, southern India. Within this plot 25,929 living woody plants (71 species) above 1 cm DBH (diameter at breast height) were identified, measured, tagged and mapped. Species abundances corresponded to the characteristic log-normal distribution. The four most abundant species (Kydia calycina, Lagerstroemia microcarpa, Terminalia crenulata and Helicteres isora) constituted nearly 56% of total stems, while seven species were represented by only one individual each in the plot. Variance/mean ratios of density showed most species to have clumped distributions. The population declined overall by 14% during the first two years, largely due to elephant and fire-mediated damage to Kydia calycina and Helicteres isora. In this article we discuss the need for large plots to study vegetation dynamics.

Vegetation structure and composition of tropical evergreen and deciduous forests in Uttara Kannada District, Western Ghats under different disturbance regimes

In the present paper, we present the structure and composition of tropical evergreen and deciduous forests in the Western Ghats monitored under a long-term programme involving Indian Institute of Science, Earthwatch and volunteer investigators from HSBC. Currently, there is limited evidence on the status and dynamics of tropical forests in the context of human disturbance and climate change. Observations made in this study show that the `more disturbed' evergreen and one of the deciduous plots have low species diversity compared to the less-disturbed forests. There are also variations in the size class structure in the more and `less disturbed' forests of all the locations. The variation is particularly noticeable in the DBH size class 10 - 15 cm category. When biomass stock estimates are considered, there was no significant difference between evergreen and deciduous forests. The difference in biomass stocks between `less disturbed' and `more disturbed' forests within a forest type is also low. Thus, the biomass and carbon stock has not been impacted despite the dependence of communities on the forests. Periodic and long-term monitoring of the status and dynamics of the forests is necessary in the context of potential increased human pressure and climate change. There is, therefore, a need to inform the communities of the impact of extraction and its effect on regeneration so as to motivate them to adopt what may be termed as ``adaptive resource management'', so as to sustain the flow of forest products.

Anisotropic, gradient and metal-like mechanical behaviors of teeth and their implications on tooth functions

The anisotropy and gradient of the elastic modulus and the hardness of teeth were investigated by means of instrumented indentation method. Such properties are attributed to the unique microstructures of teeth based on scanning electron microscopic analysis. By comparing the relationship between the ratio of hardness to the reduced elastic modulus and the ratio of elastic unloading work to the total work of teeth in course of indentation to those of other materials, we found that the material behaviors of teeth display metal-like characteristics rather than ceramics as considered traditionally. These material behaviors and relevant functions are discussed briefly.

Reprodutibilidade de um índice para diagnóstico e avaliação da atividade de lesões de cárie dentária na dentição decídua

O objetivo do presente estudo clínico é verificar a reprodutibilidade intra e interexaminadores de um critério de diagnóstico de cárie dentária (Nyvad et al. 1999) aplicado na dentição decídua, e avaliar o tempo médio necessário para a realização do exame clínico utilizando o referido critério. O mesmo é baseado na combinação de métodos visuais e táteis e propõe a diferenciação entre lesões ativas e inativas, tanto para lesões cavitadas quanto para não cavitadas. A amostra total consistiu de 80 crianças de três a sete anos de idade, de ambos os sexos, estudantes do Centro Educacional Terra Santa (Petrópolis/ RJ). Os responsáveis assinaram um termo de consentimento livre e esclarecido e o trabalho foi aprovado pelo Comitê de Ética em Pesquisa do HUPE-UERJ. Os exames foram realizados após escovação supervisionada, em consultório odontológico sob iluminação artificial, após 3-5s de secagem com ar comprimido, por dois examinadores treinados pelas autoras do índice e calibrados. As concordâncias intra e interexaminadores foram avaliadas pelo percentual de concordância (%) e pelo teste kappa (k), considerando a superfície dentária como unidade de análise e os seguintes pontos de corte: 1) hígida versus cariada; 2) ativa versus inativa; 3) descontinuidade versus hígida; e 4) cavitada versus hígida. O % e o valor de k para confiabilidade interexaminadores para cada ponto de corte foram: 1) % = 0,97 e k = 0,82 (IC: 0,80 - 0,85); 2) % = 0,98 e k = 0,80 (IC: 0,76 - 0,83); 3) % = 0,99 e k = 0,90 (IC: 0,88 - 0,93); 4) % = 99,0 e k = 0,95 (IC: 0,92 - 0,97). O % e o valor de k para confiabilidade intraexaminador para cada ponto de corte foram: 1) % = 0,98 e k = 0,86 (IC: 0,84 - 0,86); 2) % = 0,99 e k = 0,86 (IC: 0,83 - 0,89); 3) % = 0,99 e k = 0,94 (IC: 0,92 - 0,96); 4) % = 0,99 e k = 0,98 (IC: 0,96 - 0,99). O maior % de discordância (65,3% - 158/242) concentrou-se na diferenciação entre supefícies hígidas e lesões não cavitadas: 33,5% (81/242) entre superfície hígida e lesão não cavitada inativa; 26,0% (63/242), entre superfície hígida e lesão não cavitada ativa; e 5,8% (14/242), entre lesão não cavitada ativa e lesão não cavitada inativa. O tempo necessário para realização do exame clínico foi em média 226,5s (128,53). Conclui-se que o índice apresentou reprodutibilidade variando de substancial à quase perfeita e um tempo de exame viável, mostrando-se consistente e reproduzível para a realização de estudos clínicos de cárie dentária na dentição decídua.

First Record of the Ragged-tooth Shark, Odontaspis ferox, off the U.S. Atlantic Coast

On 11 September 1994, a large shark was captured and later identified as the ragged-tooth shark, Odontaspis ferox (Risso). The shark was captured during routine bottom trawl survey operations onboard the NOAA R/V Albatross IV, approximately 25 n.mi. south-southeast of Cape Hatteras, N.C. (lat. 34° 51' N, long. 75° 26' W) with a “36 Yankee” bottom trawl towed at 3.5 knots. Average water depth at the time of capture was 173 m, bottom temperature was 17.8°C, and salinity was 36.41‰. Total length (cm), fork length (cm), weight (kg), and sex were recorded, the specimen was tagged, photographed, and returned live to t

Efeito do reforço estrutural em cimentos de ionômero de vidro com fibras de vidro em restaurações classe II de molares decíduos: estudo in vitro

Os objetivos deste estudo foram medir o efeito do reforço estrutural com a adição de fibras de vidro, na resistência ao teste de tração diametral e no selamento marginal de restaurações classe II com cimento de ionômero de vidro em molares decíduos. Fibras de vidro foram incorporadas ao pó do cimento de ionômero de vidro (CIV) na concentração de 40%. As fibras usadas foram do tipo E com comprimentos que variavam de 50m a 210m. A propriedade mecânica foi verificada através do teste de tração diametral, após 15 minutos, 24 horas e 15 dias de estocagem em água. Corpos de prova foram preparados com as dimensões de 4x8 mm para cada intervalo de tempo de acordo com as normas do fabricante e padrões internacionais. Para o teste de microinfiltração foram usados segundos molares decíduos hígidos, onde foram preparadas cavidades classe II padronizadas em dois grupos: a) controle com CIV Ketac Molar Easymix (3M/ESPE); e b) teste Ketac Molar Easymix (3M/ESPE); reforçado com fibras. Estes dentes foram restaurados e deixados em água por 24h e, a seguir, imersos em solução de nitrato de prata a 50% pelo mesmo período. Para que houvesse a precipitação de sais de prata os dentes foram colocados em solução reveladora de radiografias por 15 minutos. Para analisar a microinfiltração os espécimes foram seccionados na direção mesio-distal obtendo duas amostras de observação para cada cavidade restaurada. Os resultados do teste mecânico foram analisados através dos testes de variância ANOVA e de múltiplas variáveis de Tukey. Os resultados da microinfiltração foram analisados através do teste de MANN-WHITNEY. Com a metodologia empregada foi possível concluir que houve aumento dos valores de tração diametral no CIV com a adição de fibras de vidro. Para os intervalos de 24 horas e 15 dias, o CIV reforçado com fibras apresentou valores de tração diametral superiores àqueles do CIV não reforçado, havendo diferença significativa estatística (p<0,05) para os intervalos testados. No teste de microinfiltração os grupos mostraram valores semelhantes de infiltração marginal. A adição das fibras de vidro tipo E aumentou a resistência à tração diametral do CIV testado em relação ao grupo controle e as fibras de vidro não alteraram a adesão do cimento reforçado.