辽东山区次生林生态系统主要树种幼苗对光环境的响应

辽东山区森林是辽宁省重要的水源涵养基地与用材林资源，在维系区域内生态环境和林产品的可持续供应方面占据十分重要的战略位置。该区的天然林已基本绝迹，因此该区的森林生态恢复具有重要意义。 已有研究表明，影响辽东山区森林更新演替最主要的环境因素是光环境。核桃楸（Juglans mandshurica）、水曲柳（Fraxinus mandshurica）、黄菠萝（Phellodendron amurense）和红松(Pinus koraiensis)是阔叶红松林的优势树种；这些树种幼苗对光环境的适应性差异，在群落演替和森林生态恢复中发挥重要作用。 本论文采用人为控制遮光试验测定了核桃楸、水曲柳和黄菠萝幼苗对光环境的响应，同时，采用自然光环境试验和人为控制遮光试验相结合的手段测定了红松幼苗对光环境的适应性。人为控制遮光试验设置的光环境类似于自然中的典型林窗、林缘和林下的光环境；在人为控制遮光试验中，研究材料于2007年4月末栽植于4个不同光环境（全光、全光的60%、30%和15%，分别记为FI、II、LI和WI处理）下，在2007年7~9月测定了树种幼苗的光合生理、叶片特征、生长和冠层形态特征等方面的变化，结果表明： 1）不同光环境处理区内的光合有效辐射（PAR）具有显著差异，形成一定的光强梯度，而气温，相对湿度和土壤含水量差异并不显著。全光处理区内的日平均PAR为842.4μmol∙m-2∙s-1，最大PAR为1884.1μmol∙m-2∙s-1，显著高于其它处理区。 2）生长在高光强下4个树种幼苗的叶片有较高的光合能力（Amax），随生长光强的下降，Amax显著下降；光补偿点（LCP）和光饱和点（LSP）也表现出随着生长光强的下降而降低的趋势。核桃楸和水曲柳净光合速率Pn的日变化最大值约为16μmol∙m-2∙s-1，黄菠萝的约为13μmol∙m-2∙s-1，这与温带阔叶树种叶片的最大净光合速率Pn在10~15μmol∙m-2∙s-1范围内的结论相符；3个苗龄红松针叶的Pn日变化均呈单峰型，没有光合“午休”现象，峰值出现在11:00~13:00期间。 3）4个树种幼苗的比叶重（LMA）和单位叶面积鲜重（LFA）均随着光环境的降低而下降；三个阔叶树种幼苗的叶长L、叶宽W、叶周长C和单叶面积A均具有随着光强的降低而呈增大的趋势，表明叶片通过调节叶片的形态来适应多变的光环境。 4）不同光环境对阔叶树种幼苗的植株冠形和生长有显著影响，而红松幼苗植株冠形和生长的变化无明显的规律性。 综上，本研究得出以下结论：○1.通过可塑性分析和模糊隶属函数分析，核桃楸和黄菠萝较水曲柳能适应更宽的光强幅度；同时，核桃楸和黄菠萝较水曲柳的需光性更强，核桃楸和黄菠萝的需光性差异不大。○2.与3年、5年生红松相比，7年生红松对光强的适应幅度最小；同时，7年生红松的需光性强于3年和5年生红松。○3.本研究结果支持前人的观点：红松在幼年阶段能耐一定程度的遮光，在全光的20%~60%光条件下生长较好，随着年龄的增大，红松的需光性增加。

不同光强下核桃楸、水曲柳和黄菠萝的光合生理特征

研究辽东山区次生林3种树种幼苗(核桃楸、水曲柳和黄菠萝)对生长光环境的适应性,在生长季测定4种光强下(全光、60%透光、30%透光、15%透光,分别记为FI,II,LI和WI)树种幼苗叶片气体交换参数、净光合速率、单位叶面积叶绿素含量和比叶重(LMA)。结果表明:随着光强的减弱,3个树种的光补偿点(LCP)、光饱和点(LSP)、最大光合速率(Pmax)、暗呼吸速率(Rd)、类胡萝卜素(Car)、LMA、单位叶鲜质量(LFA)均呈下降趋势;全光下单位叶面积的叶绿素Chl含量均低于弱光处理。本研究结果支持水曲柳在幼苗时期具有一定耐荫性的观点。树种生理生态指标的可塑性分析表明:黄菠萝能适应更宽的光强幅度,且黄菠萝的需光性大于核桃楸。不同光环境下3个树种的生理生态变化特征对解释森林生态系统内树种的共生和演替具有重要意义。

烯烃聚合高性能FI催化剂的进展

FI催化剂系一近几年发展起来的烯烃聚合高性能催化剂。以它的极高的活性、聚合物分子结构的可控性、多重活性聚合等特性而引人注目。本评述首先进行该催化剂的化学描述,然后分别介绍该催化剂的主要特征、活性中心结构、聚合机理和应用,重点介绍该催化剂的五大特征。

Form, fi gure, and the experience of time in seven southern composers of the 1950s-60s

After the 1980s it is diffi cult, following stylistic criteria, to draw a map of contemporary academic music. All styles are compossible, and all are practiced. In this context, the geographical entity “South of Italy” does not stand out for a musical identity with special technical-stylistic features. Rather, at a socio-cultural level, the South remains today – in music no less than in all areas where there is a gap between top development and stagnation – a land of emigrants: six out of the seven composers treated (Ivan Fedele, Giuseppe Colardo, Rosario Mirigliano, Giuseppe Soccio, Nicola Cisternino, Biagio Putignano, Paolo Aralla) live in the North of Italy. The positive aspect of this is the affi nity of the South with the transnational and superstructural community of contemporary music, which from European and Western has now become almost global. The composers under consideration belong to the generation of the ‘50s, rooted in the serial and post-serial movements (from which Franco Donatoni, Luciano Berio, Luigi Nono, Salvatore Sciarrino, Giacinto Scelsi, are the principals models, to mention only the Italians), dipped in the general phenomenon of timbrism (particularly spectralism), and acquainted with electronics. They draw from these sources various instruments of compositional technique and aspects of their poetics. In particular these composers, active from the ‘80s, develop new ways of construction of the temporal form of music. They share the goal to establish a new continuity, different from the tonal one but at the same time transcending the serial and post-serial disintegration and fragmentation. The primary means to this end is a new enhancement of the category of fi gure, as a clear and distinct, recognizable aggregate of pitches, intervals, register, durations, timbre, articulation, dynamics, and texture. Each composer elaborates the atonal fi gural material in different ways, emphasizing one aspect or another. For example, Fedele (1953) is a master in the management of form per se, Colardo (1953) in the activation of disturbed harmonic effects, Mirigliano (1950) in the creation of a slight tension from the smallest vibrations of sound, Soccio (1950) in the set up of movement by means of accumulations and discharges of energy, Cisternino (1957) in a Cagean-Scelsian emphasis on sound as such, Putignano (1960) in the suspension of time through the succession and transformation of images, Aralla (1960) in the foundation of form from below, from the concreteness of sound.

Identyfikacja domen WG/GW zaangażowanych w wiązanie białek Argonaute oraz analiza mechanizmów molekularnych odpowiedzialnych za ich zmienność

Wydział Biologii: Instytut Biologii Molekularnej i Biotechnologii

Access Point Association Coordination in Densely Deployed 802.11 Wireless Networks

Dense deployment of wireless local area network (WLAN) access points (APs) is an important part of the next generation Wi-Fi and standardization (802.11ax) efforts are underway. Increasing demand for WLAN connectivity motivates such dense deployments, especially in geographical areas with large numbers of users, such as stadiums, large enterprises, multi-tenant buildings, and urban cities. Although densification of WLAN APs guarantees coverage, it is susceptible to increased interference and uncoordinated association of stations (STAs) to APs, which degrade network throughput. Therefore, to improve network throughput, algorithms are proposed in this thesis to optimally coordinate AP associations in the presence of interference. In essence, coordination of APs in dense WLANs (DWLANs) is achieved through coordination of STAs' associations with APs. While existing approaches suggest tuning of APs' beacon powers or using transmit power control (TPC) for association control, here, the signal-to-interference-plus-noise ratio (SINRs) of STAs and the clear channel assessment (CCA) threshold of the 802.11 MAC protocol are employed. The proposed algorithms in this thesis enhance throughput and minimize coverage holes inherent in cell breathing and TPC techniques by not altering the transmit powers of APs, which determine cell coverage. Besides uncoordinated AP associations, unnecessary frequent transmission deferment is envisaged as another problem in DWLANs due to the clear channel assessment aspect of the carrier sensing multiple access collision avoidance (CSMA/CA) scheme in 802.11 standards and the short spatial reuse distance between co-channel APs. To address this problem in addition to AP association coordination, an algorithm is proposed for CCA threshold adjustment in each AP cell, such that CCA threshold used in one cell mitigates transmission deferment in neighboring cells. Performance evaluation reveals that the proposed association optimization algorithms achieve significant gain in throughput when compared with the default strongest signal first (SSF) association scheme in the current 802.11 standard. Also, further gain in throughput is observed when the CCA threshold adjustment is combined with the optimized association. Results show that when STA-AP association is optimized and CCA threshold is adjusted in each cell, throughput improves. Finally, transmission delay and the number of packet re-transmissions due to collision and contention significantly decrease.

Using smart people to form future mobile wireless networks

The concept of a body-to-body network, where smart communicating devices carried or worn by a person are used to form a wireless network with devices situated on other nearby persons. New innovations in this area will see the form factor of smart devices being modified, so that they may be worn on the human body or integrated into clothing, in the process creating a new generation of smart people. Applications of body-to-body networking will extend well beyond the support of cellular and Wi-Fi networks. They will also be used in short-range covert military applications, first responder applications, team sports and used to interconnect body area networks (BAN). Security will be a major issue as routing between multiple nodes will increase the risk of unauthorized access and compromise sensitive data. This will add complexity to the medium access layer (MAC) and network management. Antennas designed to operate in body centric communications systems may be broadly categorized as on- or off-body radiators, according to their radiation pattern characteristics when mounted on the human body.

Acesso banda larga sem fios em ambientes heterogéneos de próxima geração

O acesso ubíquo à Internet é um dos principais desafios para os operadores de telecomunicações na próxima década. O número de utilizadores da Internet está a crescer exponencialmente e o paradigma de acesso "always connected, anytime, anywhere" é um requisito fundamental para as redes móveis de próxima geração. A tecnologia WiMAX, juntamente com o LTE, foi recentemente reconhecida pelo ITU como uma das tecnologias de acesso compatíveis com os requisitos do 4G. Ainda assim, esta tecnologia de acesso não está completamente preparada para ambientes de próxima geração, principalmente devido à falta de mecanismos de cross-layer para integração de QoS e mobilidade. Adicionalmente, para além das tecnologias WiMAX e LTE, as tecnologias de acesso rádio UMTS/HSPA e Wi-Fi continuarão a ter um impacto significativo nas comunicações móveis durante os próximos anos. Deste modo, é fundamental garantir a coexistência das várias tecnologias de acesso rádio em termos de QoS e mobilidade, permitindo assim a entrega de serviços multimédia de tempo real em redes móveis. Para garantir a entrega de serviços multimédia a utilizadores WiMAX, esta Tese propõe um gestor cross-layer WiMAX integrado com uma arquitectura de QoS fim-a-fim. A arquitectura apresentada permite o controlo de QoS e a comunicação bidireccional entre o sistema WiMAX e as entidades das camadas superiores. Para além disso, o gestor de cross-layer proposto é estendido com eventos e comandos genéricos e independentes da tecnologia para optimizar os procedimentos de mobilidade em ambientes WiMAX. Foram realizados testes para avaliar o desempenho dos procedimentos de QoS e mobilidade da arquitectura WiMAX definida, demonstrando que esta é perfeitamente capaz de entregar serviços de tempo real sem introduzir custos excessivos na rede. No seguimento das extensões de QoS e mobilidade apresentadas para a tecnologia WiMAX, o âmbito desta Tese foi alargado para ambientes de acesso sem-fios heterogéneos. Neste sentido, é proposta uma arquitectura de mobilidade transparente com suporte de QoS para redes de acesso multitecnologia. A arquitectura apresentada integra uma versão estendida do IEEE 802.21 com suporte de QoS, bem como um gestor de mobilidade avançado integrado com os protocolos de gestão de mobilidade do nível IP. Finalmente, para completar o trabalho desenvolvido no âmbito desta Tese, é proposta uma extensão aos procedimentos de decisão de mobilidade em ambientes heterogéneos para incorporar a informação de contexto da rede e do terminal. Para validar e avaliar as optimizações propostas, foram desenvolvidos testes de desempenho num demonstrador inter-tecnologia, composta pelas redes de acesso WiMAX, Wi-Fi e UMTS/HSPA.

Dependable wireless real-time communications for open environments

Wireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.

Geofencing Components and Existing Models

This paper describes the various Geofencing Components and Existing Models in terms of their Information Security Control Attribute Profiles. The profiles will dictate the security attributes that should accompany each and every Geofencing Model used for Wi-Fi network security control in an organization, thus minimizing the likelihood of malfunctioning security controls. Although it is up to an organization to investigate the best way of implementing information security for itself, by looking at the related models that have been used in the past this paper will present models commonly used to implement information security controls in the organizations. Our findings will highlight the strengths and weaknesses of the various models and present what our experiment and prototype consider as a robust Geofencing Security Model for securing Wi-Fi Networks

The SmartVision navigation prototype for the blind

The goal of the project "SmartVision: active vision for the blind" is to develop a small and portable but intelligent and reliable system for assisting the blind and visually impaired while navigating autonomously, both outdoor and indoor. In this paper we present an overview of the prototype, design issues, and its different modules which integrate a GIS with GPS, Wi-Fi, RFID tags and computer vision. The prototype addresses global navigation by following known landmarks, local navigation with path tracking and obstacle avoidance, and object recognition. The system does not replace the white cane, but extends it beyond its reach. The user-friendly interface consists of a 4-button hand-held box, a vibration actuator in the handle of the cane, and speech synthesis. A future version may also employ active RFID tags for marking navigation landmarks, and speech recognition may complement speech synthesis.

Reference clock design for low power and low phase noise with temperature compensation

Thesis (Ph.D.)--University of Washington, 2016-03

Use of negative information in positioning and tracking algorithms

To avoid additional hardware deployment, indoor localization systems have to be designed in such a way that they rely on existing infrastructure only. Besides the processing of measurements between nodes, localization procedure can include the information of all available environment information. In order to enhance the performance of Wi-Fi based localization systems, the innovative solution presented in this paper considers also the negative information. An indoor tracking method inspired by Kalman filtering is also proposed.

Non-uniform printed antenna array for wireless communications in sports arenas

Wireless communications had a great development in the last years and nowadays they are present everywhere, public and private, being increasingly used for different applications. Their application in the business of sports events as a means to improve the experience of the fans at the games is becoming essential, such as sharing messages and multimedia material on social networks. In the stadiums, given the high density of people, the wireless networks require very large data capacity. Hence radio coverage employing many small sized sectors is unavoidable. In this paper, an antenna is designed to operate in the Wi-Fi 5GHz frequency band, with a directive radiation pattern suitable to this kind of applications. Furthermore, despite the large bandwidth and low losses, this antenna has been developed using low cost, off-the-shelf materials without sacrificing quality or performance, essential to mass production. © 2015 EurAAP.

Determinantes à receptividade ao bluetooth marketing pelo consumidor português

Dissertação de Mestrado apresentada ao Instituto Superior de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação do Mestre Paulo Gonçalves e da Doutora Madalena Vilas Boas Esta versão não contém as críticas e sugestões dos elementos do júri