Amperometric detection of benzoyl peroxide in pharmaceutical preparations using carbon paste electrodes with peroxidases naturally immobilized on coconut fibers

This paper describes the applications of anew carbon paste electrode containing fibers of coconut (Cocus nucifera L) fruit, which are very rich in peroxidase enzymes naturally immobilized on its structure. The new sensor was applied for the amperometric quantification of benzoyl peroxide in facial creams and dermatological shampoos. The amperometric measurements were performed in 0.1 mol L(-1) phosphate buffer (pH 5.2), at 0.0 V (versus Ag/AgCl). On these conditions, benzoyl peroxide was rapidly determined in the 5.0-55 mu mol L(-1), with a detection limit of 2.5 mu mol L(-1) (s/n = 3), response time of 4.1 s (90% of the steady state) and sensitivity limit of 0.33 A mol L(-1) cm(-2). The amperometric results are in good agreement with those obtained by spectrophotometric technique, used as a standard method. (C) 2009 Elsevier B.V. All rights reserved.

Engineering Active Pharmaceutical Ingredients by Spray Drying: Effects on Physical Properties and In Vitro Dissolution

Active pharmaceutical ingredients have very strict quality requirements; minor changes in the physical and chemical properties of pharmaceuticals can adversely affect the dissolution rate and therefore the bioavailability of a given drug. Accordingly, the aim of the present study was to investigate the effect of spray drying on the physical and in vitro dissolution properties of four different active pharmaceutical ingredients, namely carbamazepine, indomethacin, piroxicam, and nifedipine. Each drug was dispersed in a solution of ethanol and water (70:30) and subjected to single-step spray drying using similar operational conditions. A complete characterization of the spray-dried drugs was performed via differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray powder diffraction (XRPD), particle size distribution analysis, solubility analysis, and an in vitro dissolution study. The results from the thermal analysis and X-ray diffraction showed that, except for carbamazepine, no chemical modifications occurred as a result of spray drying. Moreover, the particle size distribution of all the spray-dried drugs significantly decreased. In addition, SEM images showed that most of the particles had an irregular shape. There was no significant improvement in the solubility of the spray-dried drugs compared with the unprocessed compounds; however, in general, the dissolution rates of the spray-dried drugs showed a remarkable improvement over their non-spray-dried counterparts. Therefore, the results from this study demonstrate that a single spray-drying step may lead to changes in the physical properties and dissolution characteristics of drugs and thus improve their therapeutic action.

Efficiency from pharmacy inventory technology: A means to improving quality in non-profit hospitals

Hospitals, like all organizations, have both a mission and a finite supply of resources with which to accomplish that mission. Because the inventory of therapeutic drugs is among the more expensive resources needed by a hospital to achieve its mission, a conceptual model of structure plus process equals outcome posits that adequate emphasis should be placed on optimization of the organization's investment in this important structural resource to provide highest quality outcomes. Therefore emphasis should be placed on the optimization of pharmacy inventory because lowering the financial investment in drug inventory and associated costs increases productive efficiency, a key element of quality. ^ In this study, a post-intervention analysis of a hospital pharmacy inventory management technology implementation at The University of Texas M.D. Anderson Cancer Center was conducted to determine if an intervention which reduced a hospital's financial investment in pharmaceutical inventory provided an opportunity to incrementally optimize the organization's mix of structural resources thereby improving quality of care. The results suggest that hospital pharmacies currently lacking technology to support automated purchasing logistics and perpetual, real-time inventory management for drugs may achieve measurable benefits from the careful implementation of such technology, enabling the hospital to lower its investment in on-hand inventory and, potentially, to reduce overall purchasing expenditures. ^ The importance of these savings to the hospital and potentially to the patient should not be underestimated for their ability to generate funding for previously unfunded public health programs or in their ability to provide financial relief to patients in the form of lower drug costs given the current climate of escalating healthcare costs and tightening reimbursements.^

Pharmaceutical industry : hazardous waste generation, treatment, and disposal.

Final report (SW-508) describing work performed for the Federal Solid waste management program under Contract no. 68-01-2684.

Drug lag [microform] : hearing before the Subcommittee on Natural Resources, Agriculture Research, and Environment of the Committee on Science and Technology, U.S. House of Representatives, Ninety-seventh Congress, first session, September 16, 1981.

"No. 149."

Union list of periodicals in pharmaceutical libraries.

"Published under the auspices of the Pharmaceutical Section, Science-Technology Division, Special Libraries Association."

Social aspects of pharmaceutical innovation: heart disease

This study examines the invention, innovation, introduction and use of a new drug therapy for coronary heart disease and hypertension; beta-blockade. The relationships between drug introductions and changes in medical perceptions of disease are analysed, and the development and effects of our perception of heart disease through drug treatments and diagnostic technology is described. The first section looks at the evolution of hypertension from its origin as a kidney disorder, Bright's disease, to the introduction and use of effective drugs for its treatment. It is shown that this has been greatly influenced by the introduction of new medical technologies. A medical controversy over its nature is shown both to be strongly influenced by the use of new drugs, and to influence their subsequent use. The second section reviews the literature analysing drug innovation, and examines the innovation of the beta-blocking drugs, making extensive use of participant accounts. The way in which the development of receptor theory, the theoretical basis of the innovation,was influenced by the innovation and use of drugs is discussed, then the innovation at ICI, the introduction into clinical use, and the production of similar drugs by other manufacturers are described. A study of the effects of these drugs is then undertaken, concentrating on therapeutic costs and benefits, and changes in medical perceptions of disease. The third section analyses the effects of other drugs on heart disease, looking at changes in mortality statistics and in medical opinions. The study concludes that linking work on drug innovation with that on drug effects is fruitful, that new drugs and diagnostic technology have greatly influenced medical perceptions of the nature and extent of heart disease, and that in hypertension, the improvement in drug treatment will soon result in much of the population being defined as in need of it life-long.

Faces of pricing and profit planning in innovation at the doorstep of the EU:government pricing policy in the pharmaceutical sector in Turkey

The majority of research on the pharmaceutical sector has focused on an overall micro economic, medical oriented welfare issues, whereas the marketing management role of the innovative drug manufacturer has to a large extent been disregarded. Using the case of Turkey, through a series of in-depth interviews with highly innovative companies, other marketing management possibilities are explored based on broader definitions of value and transparency. Our results suggest that pharmaceutical companies as well as the government might have a too narrow focus of value and underestimate the potential long term benefits of a broader approach to marketing management and long term relationships between the various stakeholders.

Functionalised particles using dry powder coating in pharmaceutical drug delivery:promises and challenges

Introduction: Production of functionalised particles using dry powder coating is a one-step, environmentally friendly process that paves the way for the development of particles with targeted properties and diverse functionalities. Areas covered: Applying the first principles in physical science for powders, fine guest particles can be homogeneously dispersed over the surface of larger host particles to develop functionalised particles. Multiple functionalities can be modified including: flowability, dispersibility, fluidisation, homogeneity, content uniformity and dissolution profile. The current publication seeks to understand the fundamental underpinning principles and science governing dry coating process, evaluate key technologies developed to produce functionalised particles along with outlining their advantages, limitations and applications and discusses in detail the resultant functionalities and their applications. Expert opinion: Dry particle coating is a promising solvent-free manufacturing technology to produce particles with targeted functionalities. Progress within this area requires the development of continuous processing devices that can overcome challenges encountered with current technologies such as heat generation and particle attrition. Growth within this field requires extensive research to further understand the impact of process design and material properties on resultant functionalities.

Enhancing Knowledge Acquisition in Pharmaceutical Organisations based in Pakistan

Absorptive Capacity (ACAP) depicts the sequential order of activities connecting externally generated knowledge into an organisation; this involves a company’s ability to acquire new knowledge from an external source, assimilate and transform it, and eventually exploit it via its industrial processes and products/services. The sandwiched role of middle managers, being interlinked between decision makers and employees, has been argued as vital to organisational success. However, their role is often viewed as having conflicts astride management i.e. between employees and decision makers. This study, using a thematic analysis approach, explores and identifies the common and conflicting role of middle managers, as viewed by different respondents in organisational hierarchies. Results, based on a sample of 33 employees operating in the Pakistan Pharmaceutical sector, indicate that conflicting roles of middle managers also persist with more common roles in organisations.

A Highly Improved Method For Sensitive Determination Of Amitriptyline In Pharmaceutical Formulations Using An Unmodified Carbon Nanotube Electrode In The Presence Of Sulfuric Acid.

The present paper describes a novel, simple and reliable differential pulse voltammetric method for determining amitriptyline (AMT) in pharmaceutical formulations. It has been described for many authors that this antidepressant is electrochemically inactive at carbon electrodes. However, the procedure proposed herein consisted in electrochemically oxidizing AMT at an unmodified carbon nanotube paste electrode in the presence of 0.1 mol L(-1) sulfuric acid used as electrolyte. At such concentration, the acid facilitated the AMT electroxidation through one-electron transfer at 1.33 V vs. Ag/AgCl, as observed by the augmentation of peak current. Concerning optimized conditions (modulation time 5 ms, scan rate 90 mV s(-1), and pulse amplitude 120 mV) a linear calibration curve was constructed in the range of 0.0-30.0 μmol L(-1), with a correlation coefficient of 0.9991 and a limit of detection of 1.61 μmol L(-1). The procedure was successfully validated for intra- and inter-day precision and accuracy. Moreover, its feasibility was assessed through analysis of commercial pharmaceutical formulations and it has been compared to the UV-vis spectrophotometric method used as standard analytical technique recommended by the Brazilian Pharmacopoeia.

Use Of Experimental Design To Optimize A Triple-potential Waveform To Develop A Method For The Determination Of Streptomycin And Dihydrostreptomycin In Pharmaceutical Veterinary Dosage Forms By Hplc-pad.

An HPLC-PAD method using a gold working electrode and a triple-potential waveform was developed for the simultaneous determination of streptomycin and dihydrostreptomycin in veterinary drugs. Glucose was used as the internal standard, and the triple-potential waveform was optimized using a factorial and a central composite design. The optimum potentials were as follows: amperometric detection, E1=-0.15V; cleaning potential, E2=+0.85V; and reactivation of the electrode surface, E3=-0.65V. For the separation of the aminoglycosides and the internal standard of glucose, a CarboPac™ PA1 anion exchange column was used together with a mobile phase consisting of a 0.070 mol L(-1) sodium hydroxide solution in the isocratic elution mode with a flow rate of 0.8 mL min(-1). The method was validated and applied to the determination of streptomycin and dihydrostreptomycin in veterinary formulations (injection, suspension and ointment) without any previous sample pretreatment, except for the ointments, for which a liquid-liquid extraction was required before HPLC-PAD analysis. The method showed adequate selectivity, with an accuracy of 98-107% and a precision of less than 3.9%.

Solid Lipid Nanoparticles As Nucleic Acid Delivery System: Properties And Molecular Mechanisms.

Solid lipid nanoparticles (SLNs) have been proposed in the 1990s as appropriate drug delivery systems, and ever since they have been applied in a wide variety of cosmetic and pharmaceutical applications. In addition, SLNs are considered suitable alternatives as carriers in gene delivery. Although important advances have been made in this particular field, fundamental knowledge of the underlying mechanisms of SLN-mediated gene delivery is conspicuously lacking, an imperative requirement in efforts aimed at further improving their efficiency. Here, we address recent advances in the use of SLNs as platform for delivery of nucleic acids as therapeutic agents. In addition, we will discuss available technology for conveniently producing SLNs. In particular, we will focus on underlying molecular mechanisms by which SLNs and nucleic acids assemble into complexes and how the nucleic acid cargo may be released intracellularly. In discussing underlying mechanisms, we will, when appropriate, refer to analogous studies carried out with systems based on cationic lipids and polymers, that have proven useful in the assessment of structure-function relationships. Finally, we will give suggestions for improving SLN-based gene delivery systems, by pointing to alternative methods for SLNplex assembly, focusing on the realization of a sustained nucleic acid release.

Molecularly Imprinted Solid Phase Extraction Of Fluconazole From Pharmaceutical Formulations.

This work encompasses a direct and coherent strategy to synthesise a molecularly imprinted polymer (MIP) capable of extracting fluconazole from its sample. The MIP was successfully prepared from methacrylic acid (functional monomer), ethyleneglycoldimethacrylate (crosslinker) and acetonitrile (porogenic solvent) in the presence of fluconazole as the template molecule through a non-covalent approach. The non-imprinted polymer (NIP) was prepared following the same synthetic scheme, but in the absence of the template. The data obtained from scanning electronic microscopy, infrared spectroscopy, thermogravimetric and nitrogen Brunauer-Emmett-Teller plot helped to elucidate the structural as well as the morphological characteristics of the MIP and NIP. The application of MIP as a sorbent was demonstrated by packing it in solid phase extraction cartridges to extract fluconazole from commercial capsule samples through an offline analytical procedure. The quantification of fluconazole was accomplished through UPLC-MS, which resulted in LOD≤1.63×10(-10) mM. Furthermore, a high percentage recovery of 91±10% (n=9) was obtained. The ability of the MIP for selective recognition of fluconazole was evaluated by comparison with the structural analogues, miconazole, tioconazole and secnidazole, resulting in percentage recoveries of 51, 35 and 32%, respectively.