924 resultados para new product development


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Due to a dramatic reduction in defense procurement, the benchmark for developing new defense systems today is performance at an affordable cost. In an attempt to encircle a more holistic perspective of value, lifecycle value has evolved as a concept within the Lean Aerospace Initiative, LAI. The implication of this is development of products incorporating lifecycle and long-term focus instead of a shortsighted cost cutting focus. The interest to reduce total cost of ownership while still improving performance, availability, and sustainability, other dimensions taken into account within the lifecycle value approach, falls well within this context. Several factors prevent enterprises from having a holistic perspective during product development. Some important aspects are increased complexity of the products and significant technological uncertainty. The combination of complexity in system design and the limits of individual human comprehension typically prevent a best value solution to be envisioned. The purpose of this research was to examine relative contributions in product development and determine factors that significantly promote abilities to consider and achieve lifecycle value. This paper contributes a maturity matrix based on important practices and lessons learned through extensive interview based case studies of three tactical aircraft programs, including experiences from more than 100 interviews.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study will collaborate by bringing some detailed analysis and findings on a special case study of a discontinuous product development process, trying to answer how the discontinuous product development process takes place and the main factors that influence this process. Additionally, it tried to explore some explanations for the difficulties generally faced by the companies to sustain innovation. The case is about the Motorola cell phone RAZR V3, launched in 2004. RAZR V3 was noted by industry experts as game-changing feat of design and engineering, selling more than 110 million units by end of 2008 and recognized as one of the fastest selling products in the industry. The study uses a single case methodology, which is appropriate given the access to a phenomenon that happened inside corporate dominium and it is not easily accessed for academic studies, besides being a rare case of success in the cellular phone industry. In order to magnify the understanding of the phenomenon, the exploration was extended to contrast the RAZR development process and the standard product development process in Motorola. Additionally, it was integrated a longitudinal reflection of the company product development evolution until the next breakthrough product hitting the cellular phone industry. The result of the analysis shows that discontinuous products do not fit well traditional product development process (in this case, stage-gate). This result reinforces the results obtained on previous studies of discontinuous product development conducted by other authors. Therefore, it is clear that the dynamics of discontinuous product development are different from the continuous product development, requiring different treatment to succeed. Moreover, this study highlighted the importance of the management influence in all the phases of the process as one of the most important factors, suggesting a key component to be carefully observed in future researches. Some other findings of the study that were considered very important for a discontinuous product development process: have champions (who believe and protect the project) and not only one champion; create a right atmosphere to make flow the creative process; question paradigms to create discontinuous products; simple guiding light to focus the team; company culture that accepts and knows how to deal with risks; and undoubtedly, have a company strategy that understands the different dynamics of continuous and discontinuous product development processes and treat them accordingly.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Em um ambiente global dinâmico e competitivo, muitas empresas notam que constante desenvolvimento e lançamento de novos produtos são atividades-chave para seu crescimento e sobrevivência. Hoje, um dos maiores desafios enfrentados por tais empresas envolve saber como agir em um mundo em que tanto o escopo como a estrutura do ambiente competitivo estão em constante mudança, e em que reestruturações e mudanças de portfólio são centrais para as companhias que visam capitalizar com o crescimento global. Tanto o rápido ritmo de inovação tecnológica quando a crescente afluência de economias emergentes apresentam riscos e oportunidades para as empresas, o que torna importante não apenas que estas estejam atentas ao lançamento de produtos de última geração para mercados desenvolvidos: faz-se também necessário que saibam como lançar produtos antigos para novos mercados. Usando o mercado brasileiro como um exemplo, esta dissertação procurou estudar como multinacionais têm utilizado anúncios publicitários no lançamento, para novos mercados, de categorias e subcategorias de produtos já vendidas em outros países. Após uma revisão da literatura disponível, do desenvolvimento de proposições, e da avaliação destas através de três estudos de caso, foi possível verificar a existência de alguma linearidade entre os casos e a literatura estudada, incluindo: uma busca pela legitimação da categoria que precede àquela pela da marca; o uso de “especialistas” para a legitimação da categoria; o uso de apelos baseados em argumentos; e a divulgação de mais de uma característica de produto por anúncio. No entanto, dadas algumas discrepâncias entre o que foi observado nos casos e aquilo descrito na literatura consultada, também foi possível verificar que a maneira como os anúncios são feitos em diferentes lugares depende igualmente do cenário competitivo enfrentado pela empresa, bem como de variantes econômicas e culturais específicas da localidade em questão.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The research was carried out in the Aviation Division of Dunlop Limited and was initiated as a search for more diverse uses for carbon/carbon composites. An assumed communication model of adoption was refined by introducing the concept of a two way search after making cross industry comparisons of supplier and consumer behaviour. This research has examined methods of searching for new uses for advanced technology materials. Two broad approaches were adopted. First, a case history approach investigated materials that had been in a similar oosition to carbon/carbon to see how other material producing firms had tackled the problem. Second, a questionnaire survey among industrialists examined: the role and identity of material decision makers in different sized firms; the effectiveness of various information sources and channels; and the material adoption habits of different industries. The effectiveness of selected information channels was further studied by monitoring the response to publicity given to carbon/carbon. A flow chart has been developed from the results of this research which should help any material producing firm that is contemplating the introduction of a new material to the world market. Further benefit to our understanding of the innovation and adoption of new materials would accrue from work in the followino areas: "micro" type case histories; understanding more fully the role of product champions or promoters; investigating the phase difference between incremental and radical type innovations for materials; examining the relationship between the adoption rate of new materials and the advance of technology; studying the development of cost per unit function methods for material selection; and reviewing the benefits that economy of scale studies can have on material developments. These are all suggested areas for further work.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis examines the "state of the art" of product innovation in new technology In the UK. The roles in innovation attributed to small and large firms are examined. Growing attention is being focused upon the small firm sector as a seedbed for Innovation and government policy has been changing to encourage the entrepreneurial new technology based firm (NTBF). The novel perspective of this research results from working in such a firm. It provides a longitudinal study of the management of innovation in conjunction with the corporate strategy of the firm. Given that the researcher was a participant and observer in the firm studied, the research is akin to action research in methodology but is better described as grounded theory. Theoretical concepts are drawn from the prescriptive literature describing corporate strategy, and from the empirical literature which has evaluated new product success and failure. Models of the Innovation process are discussed and appropriate strategies and reasons for product innovation failure in NTBFs are described. The strategy, structure and new product development progress of the company are examined, using both the researcher's observations and company documents. This provides information on the methods and practices adopted for product innovation in a NTBF. The thesis analyses the performance of the firm In terms of product innovation. The models and strategies derived from the literature are then tested in the light of the experience of the company. Conclusions are drawn regarding strategies for innovation in NTBFs and about the innovation process in general. The importance of a NTBF adopting a synergistic strategy is shown. Links are established between the existence of synergy in the strategy and coupling in the management of innovation. Innovation is shown to be a laterally interdisciplinary exercise and therefore the "pipeline model" Is criticised. Finally a set of guidelines Is produced for the managers of NTBFs.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Revenue and production output of the United Kingdom’s Aerospace Industry (AI) is growing year on year and the need to develop new products and innovative enhancements to existing ranges is creating a critical need for the increased utilisation and sharing of employee knowledge. The capture of employee knowledge within the UK’s AI is vital if it is to retain its pre-eminent position in the global marketplace. Crowdsourcing, as a collaborative problem solving activity, allows employees to capture explicit knowledge from colleagues and teams and also offers the potential to extract previously unknown tacit knowledge in a less formal virtual environment. By using micro-blogging as a mechanism, a conceptual framework is proposed to illustrate how companies operating in the AI may improve the capture of employee knowledge to address production-related problems through the use of crowdsourcing. Subsequently, the framework has been set against the background of the product development process proposed by Maylor in 1996 and illustrates how micro-blogging may be used to crowdsource ideas and solutions during product development. Initial validation of the proposed framework is reported, using a focus group of 10 key actors from the collaborating organisation, identifying the perceived advantages, disadvantages and concerns of the framework; results indicate that the activity of micro-blogging for crowdsourcing knowledge relating to product development issues would be most beneficial during product conceptualisation due to the requirement for successful innovation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

As identified by Griffin (1997) and Kahn (2012), manufacturing organisations typically improve their market position by accelerating their product development (PD) cycles. One method for achieving this is to reduce the time taken to design, test and validate new products, so that they can reach the end customer before competition. This paper adds to existing research on PD testing procedures by reporting on an exploratory investigation carried out in a UK-based manufacturing plant. We explore the organisational and managerial factors that contribute to the time spent on testing of new products during development. The investigation consisted of three sections, viz. observations and process modelling, utilisation metrics and a questionnaire-based investigation, from which a proposed framework to improve and reduce the PD time cycle is presented. This research focuses specifically on the improvement of the utilisation of product testing facilities and the links to its main internal stakeholders - PD engineers.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

High urban transport energy consumption is directly influenced by transport energy dependence. Dramatic reductions in urban transport energy dependence or consumption are not yet being widely observed despite the variety of urban planning tools currently available. A new urban development framework is presented to tackle this issue that makes use of a recently developed and successfully trialed GIS-based tool, the Transport Energy Specification (TES). The TES was simulated on a neighborhood in Sao Carlos, Brazil. In the simulation, energy dependence was reduced by a factor of 8 through activity location or infrastructure modifications to the built environment.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper reports a research that evaluated the product development methodologies used in Brazilian small and medium-sized metal-mechanic enterprises (SMEs), in a specific region of Sao Paulo. The tool used for collecting the data was a questionnaire, which was developed and applied through interviews conducted by the researchers in 32 companies. The main focus of this paper can be condensed in the synthesis-question ""Is only the company responsible for the development?"" which was analyzed thoroughly. The results obtained from this analysis were evaluated directly (through the respective percentages of answers) and statistically (through the search of an index which demonstrates if two questions are related). The results point to a degree of maturity in SMEs, which allows product development to be conducted in cooperation networks. (C) 2007 Elsevier Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Warranty is an important element of marketing new products as better warranty signals higher product quality and provides greater assurance to customers. Servicing warranty involves additional costs to the manufacturer and this cost depends on product reliability and warranty terms. Product reliability is influenced by the decisions made during the design and manufacturing of the product. As such warranty is very important in the context of new products. Product warranty has received the attention of researchers from many different disciplines and the literature on warranties is vast. This paper carries out a review of the literature that has appeared in the last ten years. It highlights issues of interest to manufacturers in the context of managing new products from an overall business perspective. (C) 2002 Elsevier Science B.V. All rights reserved.