Combining an enterprise resource planning system and informality:a study of efficiency and flexibility complmentarity [sic]

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT One of the current research trends in Enterprise Resource Planning (ERP) involves examining the critical factors for its successful implementation. However, such research is limited to system implementation, not focusing on the flexibility of ERP to respond to changes in business. Therefore, this study explores a combination system, made up of an ERP and informality, intended to provide organisations with efficient and flexible performance simultaneously. In addition, this research analyses the benefits and challenges of using the system. The research was based on socio-technical system (STS) theory which contains two dimensions: 1) a technical dimension which evaluates the performance of the system; and 2) a social dimension which examines the impact of the system on an organisation. A mixed method approach has been followed in this research. The qualitative part aims to understand the constraints of using a single ERP system, and to define a new system corresponding to these problems. To achieve this goal, four Chinese companies operating in different industries were studied, all of which faced challenges in using an ERP system due to complexity and uncertainty in their business environments. The quantitative part contains a discrete-event simulation study that is intended to examine the impact of operational performance when a company implements the hybrid system in a real-life situation. Moreover, this research conducts a further qualitative case study, the better to understand the influence of the system in an organisation. The empirical aspect of the study reveals that an ERP with pre-determined business activities cannot react promptly to unanticipated changes in a business. Incorporating informality into an ERP can react to different situations by using different procedures that are based on the practical knowledge of frontline employees. Furthermore, the simulation study shows that the combination system can achieve a balance between efficiency and flexibility. Unlike existing research, which emphasises a continuous improvement in the IT functions of an enterprise system, this research contributes to providing a definition of a new system in theory, which has mixed performance and contains both the formal practices embedded in an ERP and informal activities based on human knowledge. It supports both cost-efficiency in executing business transactions and flexibility in coping with business uncertainty.This research also indicates risks of using the system, such as using an ERP with limited functions; a high cost for performing informally; and a low system acceptance, owing to a shift in organisational culture. With respect to practical contribution, this research suggests that companies can choose the most suitable enterprise system approach in accordance with their operational strategies. The combination system can be implemented in a company that needs to operate a medium amount of volume and variety. By contrast, the traditional ERP system is better suited in a company that operates a high-level volume market, while an informal system is more suitable for a firm with a requirement for a high level of variety.

A methodology to select an enterprise resource planning system for a small or medium sized enterprise

Enterprise Resource Planning (ERP) systems are software programs designed to integrate the functional requirements, and operational information needs of a business. Pressures of competition and entry standards for participation in major manufacturing supply chains are creating greater demand for small business ERP systems. The proliferation of new offerings of ERP systems introduces complexity to the selection process to identify the right ERP business software for a small and medium-sized enterprise (SME). The selection of an ERP system is a process in which a faulty conclusion poses a significant risk of failure to SME’s. The literature reveals that there are still very high failure rates in ERP implementation, and that faulty selection processes contribute to this failure rate. However, the literature is devoid of a systematic methodology for the selection process for an ERP system by SME’s. This study provides a methodological approach to selecting the right ERP system for a small or medium-sized enterprise. The study employs Thomann’s meta-methodology for methodology development; a survey of SME’s is conducted to inform the development of the methodology, and a case study is employed to test, and revise the new methodology. The study shows that a rigorously developed, effective methodology that includes benchmarking experiences has been developed and successfully employed. It is verified that the methodology may be applied to the domain of users it was developed to serve, and that the test results are validated by expert users and stakeholders. Future research should investigate in greater detail the application of meta-methodologies to supplier selection and evaluation processes for services and software; additional research into the purchasing practices of small firms is clearly needed.^

Establishing an EGFR mutation screening service for non-small cell lung cancer - sample quality criteria and candidate histological predictors.

INTRODUCTION: EGFR screening requires good quality tissue, sensitivity and turn-around time (TAT). We report our experience of routine screening, describing sample type, TAT, specimen quality (cellularity and DNA yield), histopathological description, mutation result and clinical outcome. METHODS: Non-small cell lung cancer (NSCLC) sections were screened for EGFR mutations (M+) in exons 18-21. Clinical, pathological and screening outcome data were collected for year 1 of testing. Screening outcome alone was collected for year 2. RESULTS: In year 1, 152 samples were tested, most (72%) were diagnostic. TAT was 4.9 days (95%confidence interval (CI)=4.5-5.5). EGFR-M+ prevalence was 11% and higher (20%) among never-smoking women with adenocarcinomas (ADCs), but 30% of mutations occurred in current/ex-smoking men. EGFR-M+ tumours were non-mucinous ADCs and 100% thyroid transcription factor (TTF1+). No mutations were detected in poorly differentiated NSCLC-not otherwise specified (NOS). There was a trend for improved overall survival (OS) among EGFR-M+ versus EGFR-M- patients (median OS=78 versus 17 months). In year 1, test failure rate was 19%, and associated with scant cellularity and low DNA concentrations. However 75% of samples with poor cellularity but representative of tumour were informative and mutation prevalence was 9%. In year 2, 755 samples were tested; mutation prevalence was 13% and test failure only 5.4%. Although samples with low DNA concentration (2.2 ng/μL), the mutation rate was 9.2%. CONCLUSION: Routine epidermal growth factor receptor (EGFR) screening using diagnostic samples is fast and feasible even on samples with poor cellularity and DNA content. Mutations tend to occur in better-differentiated non-mucinous TTF1+ ADCs. Whether these histological criteria may be useful to select patients for EGFR testing merits further investigation.

An Enterprise Opportunity for Entrepreneurial Students: Student Enterprise Development and Experience Assessed through the Student Voice

Purpose: This research investigates the effectiveness of an experiential learning approach, available to students in all disciplines that combined a hands-on entrepreneurial and enterprise experience with professional consultant mentoring by using a competition to win business start-up funding. Design/methodology/approach: Students at a UK university had the chance to enter a competition in which they developed an entrepreneurial idea and then designed and presented a business plan to win business start-up capital. Students who were entrepreneurially motivated, but who lacked capital to start up their business, were targeted, as these students have been argued to benefit the most from a combination of business plan training and entrepreneurial development. Feedback and data was obtained from the students at each stage of the process and was thematically analysed to assess the development of students’ entrepreneurial skills and knowledge through the experience. Findings: The research found that the benefits gained from this approach included both enterprising and entrepreneurial skills, with the greatest impact being on student confidence and belief in their ability to start a business. The practical skills had a ‘demystifying’ effect on students that made them feel like entrepreneurship and enterprise start-up were attainable. Research limitations/implications: The research focused on students at one UK University and centered on entrepreneurship in a retail business. The competition thus appealed mainly to students who were interested in retail start-up, thus leaving out some enterprising students whose feedback may have been different. In addition, while entrepreneurial skills are assessed in the data, the students who would be interested in the competition would be assumed to be proactive, and this skill was not able to be analyzed. This research is a single case, and thus could be enhanced by more cases and looking at other enterprise start-up means beyond retail. Originality/value: This research makes a case that, in light of literature critical of the use of business plan training in entrepreneurship education, certain students are appropriate candidates for this approach. Specific skills and knowledge can be developed in university students using a live enterprise experience, supported by entrepreneurial mentoring. By making the event extracurricular, the study sought to capture the feedback of students who self-selected into the program, who can benefit most from combined entrepreneurial and business-plan development experience.

Place in Time: The Role of Architecture in Establishing an Emotional Connection between Man and Time

This thesis explores the role of architecture as a means of reconnecting humans to the passage of time. A neglect of the temporal in our built environment obscures understanding of the human condition in all of its sensory aspects. The exploration and design of a series of ritual engagements, both culturally, and architecturally, begin to offer a venue through which designers can engage human senses. Rituals act as a means of demarcating the passage of time. It is through the engagement with these moments that people can begin to gain a richer understanding of the ephemeral nature of their own existence. The Pritzker Architecture Prize serves as the selected ritual of exploration because of its celebration of humanity and the art of architecture. However, the notion of ritual is explored down to the level of detail of engagement with handrails and door handles.

Design and implementation of an enterprise application integration solution for science and research outcomes information management using guaraná technology

This document presents an Enterprise Application Integration based proposal for research outcomes and technological information management. The proposal addresses national and international science and research outcomes information management, and corresponding information systems. Information systems interoperability problems, approaches, technologies and integration tools are presented and applied to the research outcomes information management case. A business and technological perspective is provided, including the conceptual analysis and modelling, an integration solution based in a Domain-Specific Language (DSL) and the integration platform to execute the proposed solution. For illustrative purposes, the role and information system needs of a research unit is assumed as the representative case.

Yrittäjyys suomalaisessa yhteiskunnassa

Tässä kandidaatintyössä käsitellään yrittäjyyttä suomalaisessa yhteiskunnassa erityisesti yrityksen perustamisen näkökulmasta. Työn tavoitteena on tutkia yrittäjän ominaisuuksia ja yhteiskunnan tarjoamia mahdollisuuksia yrittäjyyteen sekä yrityksen perustamiseen. Lisäksi työssä käsitellään yrittäjyyteen liittyviä haasteita ja mahdollisuuksia sekä yrittäjyyttä tulevaisuudessa. Tutkimus tehdään ajankohtaisten kirjallisuuslähteiden pohjalta. Yrityksen perustamiseen liittyy paljon byrokratiaa ja henkilökohtaisia riskejä, mikä vaikuttaa yrittäjyyteen liittyviin asenteisiin. Yhteiskunta tarjoaa uusille ja olemassa oleville yrittäjille reilusti tukia, mutta ongelmana on tukijärjestelmän pirstaleisuus. Haasteita luovat myös yrittäjän sisäiset tekijät ja yhteiskunnassa tapahtuvat jatkuvat muutokset. Merkittävämpänä haasteena ja yrittäjyyden esteenä Suomessa voidaan nähdä yrittäjyyteen vaadittavien henkilökohtaisten ominaisuuksien ja motivaation puute yksilötasolla. Yhteiskunnassa vallitsevat trendit vaikuttavat yrittäjyyteen. Tulevaisuudessa yritysten määrän voidaan odottaa kasvavan työrakenteen murroksen myötä, ja väestön ikääntyminen aiheuttaa erityisesti nuorten yrittäjien määrän kasvua. Digitalisoituminen puolestaan luo jatkuvasti uusia liiketoimintamahdollisuuksia, joita yrittäjät voivat hyödyntää.

The Adequacy of the Enterprise Resources Planning (ERP) Systems for the Creation of intangible Managerial Accounting Information: an exploratory study

The general objective of this work was to study the contribution of the ERP for the quality of the managerial accounting information, through the perception of managers of large sized Brazilian companies. The initial principle was that, presently, we live in an enterprise reality characterized by global and competitive worldwide scenery where the information about the enterprise performance and the evaluation of the intangible assets are necessary conditions for the survival, of the companies. The research of the exploratory type is based on a sample of 37 managers of large sized-Brazilian companies. The analysis of the data treated by means of the qualitative method showed that the great majority of the companies of the sample (86%) possess an ERP implanted. It also showed that this system is used in combination with other applicative software. The managers, in its majority, were also satisfied with the information generated in relation to the dimensions Time and Content. However, with regard to the qualitative nature of the information, the ERP made some analysis possible when the Balanced Scorecard was adopted, but information able to provide an estimate of the investments carried through in the intangible assets was not obtained. These results Suggest that in these companies ERP systems are not adequate to support strategic decisions.

Fibronectin as an adjuvant in the diagnosis of oral inflammatory myofibroblastic tumor

Inflammatory myofibroblastic tumor is a distinctive lesion composed of myofibroblastic spindle shaped cells accompanied by inflammatory infiltrate that may arise in various organs. It is believed to be a noneoplastic inflammatory condition, although this is still controversial. The recognition of inflammatory myofibroblastic tumor as an entity is important especially to avoid unnecessary surgery. A few cases have been reported in the oral cavity. This report primarily presents a case of inflammatory myofibroblastic tumor that arose in the floor of mouth of a 23-year-old woman. The proliferating spindle cells were immunoreactive for vimentin, smooth muscle actin, and muscle specific actin and negative for desmin, AE1/AE3, S-100, CD68, MyoD1 and caldesmon. In an attempt to assess the potential neoplastic nature of this lesion, immunohistochemical expression of ALK protein was performed, although no immunoreactivity was detected. Also, the presence of well differentiated myofibroblasts identified by fibronectin is discussed, as well as the importance in establishing an immunoprofile to better consolidate the diagnosis. We conclude that the study of fibronectin in case series may aid the diagnosis as well as the prediction of the tumor course.

A novel framework for modeling value for the customer, an essay on negotiation

This paper proposes a novel framework for modelling the Value for the Customer, the so-called the Conceptual Model for Decomposing Value for the Customer (CMDVC). This conceptual model is first validated through an exploratory case study where the authors validate both the proposed constructs of the model and their relations. In a second step the authors propose a mathematical formulation for the CMDVC as well as a computational method. This has enabled the final quantitative discussion of how the CMDVC can be applied and used in the enterprise environment, and the final validation by the people in the enterprise. Along this research, we were able to confirm that the results of this novel quantitative approach to model the Value for the Customer is consistent with the company's empirical experience. The paper further discusses the merits and limitations of this approach, proposing that the model is likely to bring value to support not only the contract preparation at an Ex-Ante Negotiation Phase, as demonstrated, but also along the actual negotiation process, as finally confirmed by an enterprise testimonial.

Enterprise reference lexicon building from business models

Nowadays, a significant increase on the demand for interoperable systems for exchanging data in business collaborative environments has been noticed. Consequently, cooperation agreements between each of the involved enterprises have been brought to light. However, due to the fact that even in a same community or domain, there is a big variety of knowledge representation not semantically coincident, which embodies the existence of interoperability problems in the enterprises information systems that need to be addressed. Moreover, in relation to this, most organizations face other problems about their information systems, as: 1) domain knowledge not being easily accessible by all the stakeholders (even intra-enterprise); 2) domain knowledge not being represented in a standard format; 3) and even if it is available in a standard format, it is not supported by semantic annotations or described using a common and understandable lexicon. This dissertation proposes an approach for the establishment of an enterprise reference lexicon from business models. It addresses the automation in the information models mapping for the reference lexicon construction. It aggregates a formal and conceptual representation of the business domain, with a clear definition of the used lexicon to facilitate an overall understanding by all the involved stakeholders, including non-IT personnel.

Enterprise semantic Web

This document is a journey through Semantic Web principles and Microsoft SharePoint in order to come to understand some advantages and disadvantages of theirs, and how Semantic Web principles can be blended into an enterprise solution like Microsoft SharePoint.

Interfaz Siebel ‐ Intranet

Una empresa que da servicios de asistencia a usuarios para una entidad bancaria gestiona y registra las incidencias que los empleados u oficinas puedan tener mediante un software CRM. Los empleados del banco no tienen acceso a dicho software, con lo que necesitan alguna forma de poder llegar a cierta información. Este proyecto rellena dicho hueco, estableciendo una conexión extremo a extremo de forma segura y eficaz. Por medio de ficheros XML se envían las solicitudes y las respuestas desde la intranet del banco (mediante un formulario de registro de incidencias) hasta los sistemas CRM.

A novel procedure for establishing clinching parameters for high strength steel sheet

The building industry has a particular interest in using clinching as a joining method for frame constructions of light-frame housing. Normally many clinch joints are required in joining of frames.In order to maximise the strength of the complete assembly, each clinch joint must be as sound as possible. Experimental testing is the main means of optimising a particular clinch joint. This includes shear strength testing and visual observation of joint cross-sections. The manufacturers of clinching equipment normally perform such experimental trials. Finite element analysis can also be used to optimise the tool geometry and the process parameter, X, which represents the thickness of the base of the joint. However, such procedures require dedicated software, a skilled operator, and test specimens in order to verify the finite element model. In addition, when using current technology several hours' computing time may be necessary. The objective of the study was to develop a simple calculation procedure for rapidly establishing an optimum value for the parameter X for a given tool combination. It should be possible to use the procedure on a daily basis, without stringent demands on the skill of the operator or the equipment. It is also desirable that the procedure would significantly decrease thenumber of shear strength tests required for verification. The experimental workinvolved tests in order to obtain an understanding of the behaviour of the sheets during clinching. The most notable observation concerned the stage of the process in which the upper sheet was initially bent, after which the deformation mechanism changed to shearing and elongation. The amount of deformation was measured relative to the original location of the upper sheet, and characterised as the C-measure. By understanding in detail the behaviour of the upper sheet, it waspossible to estimate a bending line function for the surface of the upper sheet. A procedure was developed, which makes it possible to estimate the process parameter X for each tool combination with a fixed die. The procedure is based on equating the volume of material on the punch side with the volume of the die. Detailed information concerning the behaviour of material on the punch side is required, assuming that the volume of die does not change during the process. The procedure was applied to shear strength testing of a sample material. The sample material was continuously hot-dip zinc-coated high-strength constructional steel,with a nominal thickness of 1.0 mm. The minimum Rp0.2 proof stress was 637 N/mm2. Such material has not yet been used extensively in light-frame housing, and little has been published on clinching of the material. The performance of the material is therefore of particular interest. Companies that use clinching on a daily basis stand to gain the greatest benefit from the procedure. By understanding the behaviour of sheets in different cases, it is possible to use data at an early stage for adjusting and optimising the process. In particular, the functionality of common tools can be increased since it is possible to characterise the complete range of existing tools. The study increases and broadens the amount ofbasic information concerning the clinching process. New approaches and points of view are presented and used for generating new knowledge.

Enterprise Portal as a Knowledge Management Tool in a Global Forest Products Company

Tietojohtaminen on osoittautunut nykypäivänä organisaatioiden yhdeksi suurimmaksi haasteeksi. Haasteena ei vain ole se tiedon määrä mitä tulisi hallita, vaan pikemminkin tiedonhallinta toimii yritykselle kilpailuetuna globaalissa yritysmaailmassa. Tämän työn tavoitteena on tutkia yritysportaalin soveltuvuutta tiedonhallintaan globaalissa metsäteollisuusyrityksessä. Lisäksi tavoitteena on selvittää portaalin sovittamista kullekin käyttäjäryhmälle case yrityksessä. Työn teoriaosassa on käsitelty tiedonhallinnan monimuotoisuutta ja vaikeutta kuvata sitä yksiselitteisesti. Lisäksi käyttäjäryhmien ja käyttäjäprofiilien määrittämiseen vaikuttavia seikkoja on selvitetty tässä osassa. Empiirinen osa käsittelee case-yritystä ja sen suhdetta tiedonhallintaan sekä tämän kaltaisen tiedonhallinnan työvälineen käyttöön. Työstä saatujen tulosten perusteella voidaan todeta yritysportaalin soveltuvan hyvin tiedonhallintaan monimutkaisessakin yrityksessä. Portaali muuttaa yrityksen liiketoimintaprosesseja läpinäkyvämmiksi, kun bisneskriittistä tietoa tarjotaan yhdessä paikassa.