An adjustable focusing system for a 2 MeV H- ion beam line based on permanent magnet quadrupoles

A compact adjustable focusing system for a 2 MeV H- RFQ Linac is designed, constructed and tested based on four permanent magnet quadrupoles (PMQ). A PMQ model is realised using finite element simulations, providing an integrated field gradient of 2.35 T with a maximal field gradient of 57 T/m. A prototype is constructed and the magnetic field is measured, demonstrating good agreement with the simulation. Particle track simulations provide initial values for the quadrupole positions. Accordingly, four PMQs are constructed and assembled on the beam line, their positions are then tuned to obtain a minimal beam spot size of (1.2 x 2.2) mm^2 on target. This paper describes an adjustable PMQ beam line for an external ion beam. The novel compact design based on commercially available NdFeB magnets allows high flexibility for ion beam applications.

Management information:design of a system for change identification

This thesis deals with the problem of Information Systems design for Corporate Management. It shows that the results of applying current approaches to Management Information Systems and Corporate Modelling fully justify a fresh look to the problem. The thesis develops an approach to design based on Cybernetic principles and theories. It looks at Management as an informational process and discusses the relevance of regulation theory to its practice. The work proceeds around the concept of change and its effects on the organization's stability and survival. The idea of looking at organizations as viable systems is discussed and a design to enhance survival capacity is developed. It takes Ashby's theory of adaptation and developments on ultra-stability as a theoretical framework and considering conditions for learning and foresight deduces that a design should include three basic components: A dynamic model of the organization- environment relationships; a method to spot significant changes in the value of the essential variables and in a certain set of parameters; and a Controller able to conceive and change the other two elements and to make choices among alternative policies. Further considerations of the conditions for rapid adaptation in organisms composed of many parts, and the law of Requisite Variety determine that successful adaptive behaviour requires certain functional organization. Beer's model of viable organizations is put in relation to Ashby's theory of adaptation and regulation. The use of the Ultra-stable system as abstract unit of analysis permits developing a rigorous taxonomy of change; it starts distinguishing between change with in behaviour and change of behaviour to complete the classification with organizational change. It relates these changes to the logical categories of learning connecting the topic of Information System design with that of organizational learning.

Optimum Chemical Balance Weighing Design under Certain Condition

2000 Mathematics Subject Classification: 62K05, 05B05.

Design of high channel-count fiber Bragg gratings using tailored group delay

A novel method of fiber Bragg grating design based on tailored group delay is presented. The method leads to designs that are superior to the previously reported results. © OSA 2012.

Nvidia, matrox, paper? - Undergraduate game design tools in the humanities and social sciences

Eschewing costly high-tech approaches, this paper looks at the experience of using low-tech approaches to game design assignments as problem based learning and assessment tool over a number of years in undergraduate teaching. General game design concepts are discussed, along with learning outcomes and assessment rubrics in line with Blooms Taxonomy based on evidence from students who had no prior experience of serious game play or design. Approaches to creating game design based assessments are offered.

Education and self-regulation of learning for gifted pupils: Systemic design and development.

Gifted pupils differ from their age-mates with respect to development potential, actual competencies, self-regulatory capabilities, and learning styles in one or more domains of competence. The question is how to design and develop education that fits and further supports such characteristics and competencies of gifted pupils. Analysis of various types of educational interventions for gifted pupils reflects positive cognitive or intellectual effects and differentiated social comparison or group-related effects on these pupils. Systemic preventive combination of such interventions could make these more effective and sustainable. The systemic design is characterised by three conditional dimensions: differentiation of learning materials and procedures, integration by and use of ICT support, and strategies to improve development and learning. The relationships to diagnostic, instructional, managerial, and systemic learning aspects are expressed in guidelines to develop or transform education. The guidelines imply the facilitation of learning arrangements that provide flexible self-regulation for gifted pupils. A three-year pilot in Dutch nursery and primary school is conducted to develop and implement the design in collaboration with teachers. The results constitute prototypes of structured competence domains and supportive software. These support the screening of entry characteristics of all four-year old pupils and assignment of adequate play and learning processes and activities throughout the school career. Gifted and other pupils are supported to work at their actual achievement or competency levels since their start in nursery school, in self-regulated learning arrangements either in or out of class. Each pupil can choose other pupils to collaborate with in small groups, at self-chosen tasks or activities, while being coached by the teacher. Formative evaluation of the school development process shows that the systemic prevention guidelines seem to improve learning and social progress of gifted pupils, including their self-regulation. Further development and implementation steps are discussed.

It's Not Rocket Library Science: Design Epistemology and American Librarianship

Thesis (Ph.D.)--University of Washington, 2016-06

Finite Population Inference for Causal Parameters

Thesis (Ph.D.)--University of Washington, 2016-08

The Design and Implementation of a SD Card File System

SD card (Secure Digital Memory Card) is widely used in portable storage medium. Currently, latest researches on SD card, are mainly SD card controller based on FPGA (Field Programmable Gate Array). Most of them are relying on API interface (Application Programming Interface), AHB bus (Advanced High performance Bus), etc. They are dedicated to the realization of ultra high speed communication between SD card and upper systems. Studies about SD card controller, really play a vital role in the field of high speed cameras and other sub-areas of expertise. This design of FPGA-based file systems and SD2.0 IP (Intellectual Property core) does not only exhibit a nice transmission rate, but also achieve the systematic management of files, while retaining a strong portability and practicality. The file system design and implementation on a SD card covers the main three IP innovation points. First, the combination and integration of file system and SD card controller, makes the overall system highly integrated and practical. The popular SD2.0 protocol is implemented for communication channels. Pure digital logic design based on VHDL (Very-High-Speed Integrated Circuit Hardware Description Language), integrates the SD card controller in hardware layer and the FAT32 file system for the entire system. Secondly, the document management system mechanism makes document processing more convenient and easy. Especially for small files in batch processing, it can ease the pressure of upper system to frequently access and process them, thereby enhancing the overall efficiency of systems. Finally, digital design ensures the superior performance. For transmission security, CRC (Cyclic Redundancy Check) algorithm is for data transmission protection. Design of each module is platform-independent of macro cells, and keeps a better portability. Custom integrated instructions and interfaces may facilitate easily to use. Finally, the actual test went through multi-platform method, Xilinx and Altera FPGA developing platforms. The timing simulation and debugging of each module was covered. Finally, Test results show that the designed FPGA-based file system IP on SD card can support SD card, TF card and Micro SD with 2.0 protocols, and the successful implementation of systematic management for stored files, and supports SD bus mode. Data read and write rates in Kingston class10 card is approximately 24.27MB/s and 16.94MB/s.

Glycosaminoglycan distribution in the rat uterine cervix during the estrous cycle

OBJECTIVE: To analyze the amount of glycosaminoglycans in the uterine cervix during each phase of the rat estrous cycle. DESIGN: Based on vaginal smears, forty female, regularly cycling rats were divided into four groups (n = 10 for each group): GI - proestrous, GII - estrous, GIII - metaestrous and GIV - diestrous. Animals were sacrificed at each phase of the cycle, and the cervix was immediately removed and submitted to biochemical extraction and determination of sulfated glycosaminoglycans and hyaluronic acid. The results were analyzed by ANOVA followed by the Bonferroni post-hoc test. RESULTS: The uterine cervix had the highest amount of total sulfated glycosaminoglycans and dermatan sulfate during the estrous phase (8.90 ± 0.55 mg/g of cetonic extract, p<0.001; and 8.86 ± 0.57 mg/g of cetonic extract, p<0.001). In addition, there was more heparan sulfate at the cervix during the proestrous phase (0.185 ± 0.03 mg/g of cetonic extract) than during any other phase (p<0.001). There were no significant changes in the concentration of hyaluronic acid in the uterine cervix during the estrous cycle. CONCLUSION: Our data suggest that the amount of total sulfated glycosaminoglycans may be influenced by hormonal fluctuations related to the estrous cycle, with dermatan sulfate and heparan sulfate being the glycosaminoglycans most sensitive to hormonal change.

Mudanças no âmbito da testagem anti-HIV no Brasil entre 1998 e 2005

OBJETIVO: Analisar mudanças na realização de teste anti-HIV, as razões alegadas entre as pessoas que foram ou não testadas e o recebimento de aconselhamento. MÉTODOS: Estudos transversais conduzidos com homens e mulheres de 16 a 65 anos, com amostras representativas do Brasil urbano em 1998 (n=3.600) e 2005 (n=5.040). Características sociodemográficas, sexuais, reprodutivas e de experiências de vida e saúde foram consideradas na análise. A avaliação das possíveis diferenças nas distribuições das variáveis baseou-se nos testes qui-quadrado de Pearson e F design-based (±<5%). RESULTADOS: Em 1998, 20,2% dos entrevistados haviam realizado o teste e 33,6% em 2005. Foram testadas 60% das mulheres na faixa 25-34 anos, mas as que iniciaram a vida sexual antes dos 16 anos e reportaram quatro ou mais parceiros sexuais nos cinco anos anteriores à entrevista foram menos testadas. Não se observou aumento significativo da testagem entre homens, exceto para os de 55-65 anos, renda per capita entre 1-3 e 5-10 salários mínimos, aposentados, protestantes históricos e adeptos de cultos afro-brasileiros, moradores da região Norte/Nordeste e os que declararam parceria homo/bissexual ou não tiveram relações sexuais nos cinco anos anteriores à entrevista. Não aumentou a freqüência de testagem entre pessoas auto-avaliadas como sob alto risco para o HIV. Entre as mulheres, a freqüência de testagem pré-natal aumentou e a testagem por trabalho diminuiu entre os homens. Em 2005, metade dos testados não recebeu orientação antes ou após o teste. CONCLUSÕES: Houve expansão desigual na testagem, atingindo principalmente mulheres em idade reprodutiva, adultas e pessoas com melhores condições sociais. A testagem parece estar aumentando no País sem a devida atenção à decisão autônoma das pessoas e sem o provimento de maior e melhor oferta de aconselhamento

The Preparation of Ternary Solid Dispersions of an Herbal Drug via Spray Drying of Liquid Feed

The present study aimed the preparation and characterization of ternary solid dispersions by direct spray drying of a liquid suspension containing curcumin, a solubility enhancer and a drying aid. The experiments followed a Box-Behnken design in order to evaluate the influence of temperature, ratio of curcumin: lipidic carrier, and the collodial silicon dioxide content on the characteristics of the microparticulated solid dispersions. The angle of repose, Hausner factor, Carr index, water activity, and solubility were used to characterize solid dispersions. The results show that water activity, Hausner factor, and Carr index varied in an acceptable range for pharmaceutical purposes. The condition that maximizes solubility was determined using an exploratory design based on a surface response analysis and allowed a 3200-fold increase in curcumin solubility. Ternary solid dispersion showed a 90% curcumin release after 10min during a dissolution test. The results show that the spray drying of a liquid feed is an attractive and promising alternative to obtain enhanced solubility drug ternary solid dispersions.

Advice on exercise from a family physician can help sedentary patients to become active

Objectives: To test the effectiveness, in the setting of primary health care, of verbal advice on exercise from a family physician (FP) combined with supporting written information. Design: A controlled trial with subjects allocated to a control group or one of two intervention groups using a balanced design based on day of the week. Setting: Ten general practices in Perth, Western Australia. Subjects: All sedentary patients consulting an FP. Intervention: Verbal advice on exercise from the FP and a pamphlet on exercise mailed to the patient's home address within 2 days of his/her visit to the doctor. Main outcome measure: Level of physical activity at followup. Results: 6,351 adult patients attending an FP practice completed a screening questionnaire, and 763 sedentary adults were recruited to the project. The response to follow-up, via a postal survey at 1, 6, and 12 months after the index consultation was 70%, 60%, and 57%, respectively. At 1 month a subsample of the control and intervention subjects were contacted for a telephone interview to verify self-reported levels of activity (n = 136). Treating all nonresponders as sedentary, at 1 month significantly more subjects in the combined intervention groups reported doing some physical activity (40%) compared with the control group (31%). Similarly, at 6 months, 30% of the control group and 38% of the combined intervention groups were now active. There was very little change at followup at 12 months (31% control and 36% intervention groups, respectively). Conclusion: A simple intervention aimed at the promotion of physical activity to sedentary patients in general practice can help reduce inactivity.

Designing teams for first-of-a-kind, complex systems using the initial phases of cognitive work analysis: Case study

We present a technique for team design based on cognitive work analysis (CWA). We first develop a rationale for this technique by discussing the limitations of conventional approaches for team design in light of the special characteristics of first-of-a-kind, complex systems. We then introduce the CWA-based technique for team design and provide a case study of how we used this technique to design a team for a first-of-a-kind, complex military system during the early stages of its development. In addition to illustrating the CWA-based technique by example, the case study allows us to evaluate the technique. This case study demonstrates that the CWA-based technique for team design is both feasible and useful, although empirical validation of the technique is still necessary. Applications of this work include the design of teams for first-of-a-kind, complex systems in military, medical, and industrial domains.