The long-run impact of Information and Communication Technology on economic output: The case of Australia

This paper investigates the cointegration and causal relationships between Information and Communication Technology (ICT) and economic output in Australia using data for about five decades. The framework used in this paper is the single-sector aggregate production function, which is the first comprehensive approach of this kind to include ICT and non-ICT capital and other factors to examine long-run Granger causality. The empirical evidence points to a cointegration relationship between ICT capital and output, and implies that ICT capital Granger causes economic output and multifactor productivity, as does non-ICT capital.

Analysis and Use of Information and Communication Tools in Economics of Climate Change

16 p.

Rethinking schools and community : the knowledge producing school

Schools appear in some accounts of community informatics as part of community, one of a number of organisations that need to be taken into account, perhaps on the basis of them being useful physical or human resources around which community informatics might be based. For their part, schools, at least in Australia, have been an important, early element in the broad take-up of computing and communication technologies (CCTs) by the community. Apart from the possibility of using school resources to support community access out of school time and based on what is published in both fields, schools and work in community informatics have tended to operate independently of one another. There are, nonetheless, interesting parallels in these two broad areas of activity which promote the use of CCTs. This chapter outlines a new research agenda in which schools produce knowledge for local community and in doing so develop new and productive community partnerships. The development provides interesting opportunities for the transformation of regions via this approach to community informatics. The background to this project is based in the long history of using CCTs in schools. The chapter will argue that the way in which schools understand CCTs is crucial to shaping what is possible to be done with CCTs in schools. Shifting the emphasis from information to relationships opens up alternatives that provide opportunities for significant, new relationships with community.

The place of information and communication technology-mediated consultations in primary care : GPs' perspectives

Background: New information and communication technologies such as email and text messaging have been shown to be useful in some aspects of primary care service delivery. Little is known about Scottish GPs’ attitudes towards the adoption of these technologies as routine consultation tools.

Objectives: To explore GPs’ perceptions of the potential place of new non-face-to-face consultation technologies in the routine delivery of primary care; to explore GPs’ perceived barriers to the introduction of these technologies and to identify the processes by which GPs feel that new consultation technologies could be incorporated into routine primary care.

Methods: Qualitative interview study: 20 in-depth semi-structured interviews carried out with maximum variation sample of GPs across Scotland.

Results: Whilst the face-to-face consultation was seen as central to much of the clinical and diagnostic work of primary care, many GPs were conditionally willing to consider using new technologies in the future, particularly to carry out administrative or less complex tasks and therefore maximize practice efficiency and patient convenience. Key considerations were access to appropriate training, IT support and medico-legal guidance.

Conclusions: GPs are conditionally willing to use new consultation media if clinically appropriate and if medico-legal and technical support is available.

Discover the Thracians - An Approach for Use of 2D and 3D Technologies for Digitization of Cultural Heritage in the Field of E-learning

Information and communication technologies (ICT) offer an easier access to and a multi-perspective view of cultural heritage artifacts and may also enrich and improve cultural heritage education through the adoption of innovative learning/teaching methods. This paper examines the different practices and opportunities for digitization of cultural artifacts with historical significance and describes the work on a pilot project concerning the development of e-learning materials in the Thracian cultural and historical heritage. The proposed method presents an approach based on a combination of 2D and 3D technologies to facilitate the overall process of digitization of individual objects. This approach not only provides greater opportunities for presenting the Thracian heritage but also new perspectives for studying it - students, scientists, PhD students will have the opportunity to work with the materials without having access to them.

Quick recovery in transactional flash

Maintaining metadata consistency is a critical issue in designing a filesystem. Although satisfactory solutions are available for filesystems residing on magnetic disks, these solutions may not give adequate performance for filesystems residing on flash devices. Prabhakaran et al. have designed a metadata consistency mechanism specifically for flash chips, called Transactional Flash1]. It uses cyclic commit mechanism to provide transactional abstractions. Although significant improvement over usual journaling techniques, this mechanism has certain drawbacks such as complex protocol and necessity to read whole flash during recovery, which slows down recovery process. In this paper we propose addition of thin journaling layer on top of Transactional Flash to simplify the protocol and speed up the recovery process. The simplified protocol named Quick Recovery Cyclic Commit (QRCC) uses journal stored on NOR flash for recovery. Our evaluations on actual raw flash card show that journal writes add negligible penalty compared to original Transactional Flash's write performance, while quick recovery is facilitated by journal in case of failures.

A multichannel sampling method for 2-D finite-rate-of-innovation signals

We address the problem of sampling and reconstruction of two-dimensional (2-D) finite-rate-of-innovation (FRI) signals. We propose a three-channel sampling method for efficiently solving the problem. We consider the sampling of a stream of 2-D Dirac impulses and a sum of 2-D unit-step functions. We propose a 2-D causal exponential function as the sampling kernel. By causality in 2-D, we mean that the function has its support restricted to the first quadrant. The advantage of using a multichannel sampling method with causal exponential sampling kernel is that standard annihilating filter or root-finding algorithms are not required. Further, the proposed method has inexpensive hardware implementation and is numerically stable as the number of Dirac impulses increases.

Emergency Handling in MICS based Body Area Network

Body Area Network, a new wireless networking paradigm, promises to revolutionize the healthcare applications. A number of tiny sensor nodes are strategically placed in and around the human body to obtain physiological information. The sensor nodes are connected to a coordinator or a data collector to form a Body Area Network. The tiny devices may sense physiological parameters of emergency in nature (e.g. abnormality in heart bit rate, increase of glucose level above the threshold etc.) that needs immediate attention of a physician. Due to ultra low power requirement of wireless body area network, most of the time, the coordinator and devices are expected to be in the dormant mode, categorically when network is not operational. This leads to an open question, how to handle and meet the QoS requirement of emergency data when network is not operational? Emergency handling becomes more challenging at the MAC layer, if the channel access related information is unknown to the device with emergency message. The aforementioned scenarios are very likely scenarios in a MICS (Medical Implant Communication Service, 402-405 MHz) based healthcare systems. This paper proposes a mechanism for timely and reliable transfer of emergency data in a MICS based Body Area Network. We validate our protocol design with simulation in a C++ framework. Our simulation results show that more than 99 p ercentage of the time emergency messages are reached at the coordinator with a delay of 400ms.

Differential Multi-phase DLL for Reconfigurable Radio Frequency Synthesizer

A multi phase, delay-locked loop (DLL) based frequency synthesizer is designed for harmonic rejection mixing in reconfigurable radios. This frequency synthesizer uses a 1 GHz input reference frequency, and achieves <= 20ns settling time by utilizing a wide loop bandwidth. The circuit has been designed in 0.13-mu m CMOS technology. It is designed for a frequency range of 500 MHz to 3 GHz with stuck/harmonic lock removal assist. Index Terms-stuck lock, harmonic lock, delay-locked loops, multi phase, phase detector, frequency synthesis

Optical Flow based on Approximate Nearest Neighbor Field

In this work, we propose an algorithm for optical flow estimation using Approximate Nearest Neighbor Fields (ANNF). Proposed optical flow estimation algorithm consists of two steps, flow initialization using ANNF maps and cost filtering. Flow initialization is done by computing the ANNF map using FeatureMatch between two consecutive frames. The ANNF map obtained represents a noisy optical flow, which is refined by making use of superpixels. The best flow associated with each superpixel is computed by optimizing a cost function. The proposed approach is evaluated on Middlebury and MPI-Sintel optical flow dataset and is found to be comparable with the state of the art methods for optical flow estimation.

Crowd Flow Segmentation based on Motion Vectors in H.264 Compressed Domain

In this work, we have explored the prospect of segmenting crowd flow in H. 264 compressed videos by merely using motion vectors. The motion vectors are extracted by partially decoding the corresponding video sequence in the H. 264 compressed domain. The region of interest ie., crowd flow region is extracted and the motion vectors that spans the region of interest is preprocessed and a collective representation of the motion vectors for the entire video is obtained. The obtained motion vectors for the corresponding video is then clustered by using EM algorithm. Finally, the clusters which converges to a single flow are merged together based on the bhattacharya distance measure between the histogram of the of the orientation of the motion vectors at the boundaries of the clusters. We had implemented our proposed approach on the complex crowd flow dataset provided by 1] and compared our results by using Jaccard measure. Since we are performing crowd flow segmentation in the compressed domain using only motion vectors, our proposed approach performs much faster compared to other pixel domain counterparts still retaining better accuracy.

Design of an Automated Dispenser Unit

This paper presents our work on developing an automated micro positioner and a low cost disposable dispenser module having a disposable dispenser core. The dispenser core is made up of Polydimethylsiloxane (PDMS). Once the user specifies the dispensing location in the Graphical User Interface (GUI), the movement of the micropositioner is automatic. The design, fabrication and characterization results of the dispenser module are also presented. The dispensing experiments are performed with Di-Ethanol Amine as the working reagent. The minimum dispensed volume achieved is about 4 nL.

Super Resolution Using a Single Image Dictionary

To perform super resolution of low resolution images, state-of-the-art methods are based on learning a pair of lowresolution and high-resolution dictionaries from multiple images. These trained dictionaries are used to replace patches in lowresolution image with appropriate matching patches from the high-resolution dictionary. In this paper we propose using a single common image as dictionary, in conjunction with approximate nearest neighbour fields (ANNF) to perform super resolution (SR). By using a common source image, we are able to bypass the learning phase and also able to reduce the dictionary from a collection of hundreds of images to a single image. By adapting recent developments in ANNF computation, to suit super-resolution, we are able to perform much faster and accurate SR than existing techniques. To establish this claim, we compare the proposed algorithm against various state-of-the-art algorithms, and show that we are able to achieve b etter and faster reconstruction without any training.

Sparse coding based VLAD for efficient image retrieval

Representing images and videos in the form of compact codes has emerged as an important research interest in the vision community, in the context of web scale image/video search. Recently proposed Vector of Locally Aggregated Descriptors (VLAD), has been shown to outperform the existing retrieval techniques, while giving a desired compact representation. VLAD aggregates the local features of an image in the feature space. In this paper, we propose to represent the local features extracted from an image, as sparse codes over an over-complete dictionary, which is obtained by K-SVD based dictionary training algorithm. The proposed VLAD aggregates the residuals in the space of these sparse codes, to obtain a compact representation for the image. Experiments are performed over the `Holidays' database using SIFT features. The performance of the proposed method is compared with the original VLAD. The 4% increment in the mean average precision (mAP) indicates the better retrieval performance of the proposed sparse coding based VLAD.

Sensitivity characteristics of Ag doped BaTiO3-CuO mixed oxide as Carbon-dioxide S ensor

Ag doped BaTiO3-CuO mixed oxide thin films are evaluated for their carbon-dioxide sensing characteristics. The metal oxide films of different thicknesses are deposited on oxidized p type Si < 100 > substrate by RF Sputtering. Sensing characteristics for different CO2 concentration, (300 ppm - 1000 ppm) are obtained for different operating temperatures, (100 degrees C - 400 degrees C). Optimum temperature for maximum sensitivity is found to be 250 degrees C. The effect of annealing on sensing properties is also evaluated. The unannealed films give better sensitivity than that of annealed films. Response time and recovery time are also calculated.