Débora, qual foi o livro que trouxeste hoje? A potencialidade dos livros na educação pré-escolar

Relatório da UC Seminário de Apoio à Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar

Establishing the main Guidelines for Cast Steel to Produce Truck Parts

Este trabalho foi realizado na Scania CV AB e teve como principal objectivo estabelecer uma diretriz sobre a possível utilização de aços vazados. Existe uma grande necessidade na realização deste trabalho, de forma a apoiar os engenheiros de projecto no seu processo de selecção dos materiais mais adequados, para produzir componentes mais leves e de elevado desempenho. Esta diretriz apresenta informação relacionada com propriedades mecânicas, processos de fundição, vazabilidade, tipologia de defeitos, tratamentos térmicos, soldabilidade e tratamentos superficiais dos aços vazados. Este trabalho foi limitado, na seleção de materiais para componentes do camião, a aços vazados que poderiam ser aplicados em dois componentes específicos: um componente estrutural da carroçaria sujeito a esforços de fadiga e a um colector de gases de combustão, sujeito a fluência, oxidação, fadiga por corrosão, fadiga-térmica e fadiga-mecânica. Foi realizado um benchmark focado nestes dois componentes de forma a saber que materiais são utilizados de momento por outras empresas concorrentes. Foi realizada ainda uma análise sobre possíveis materiais que possam ser aplicados em cada componente referido. Foi conduzida uma caracterização no estado bruto de fundição de um aço inoxidável vazado usado para produzir um protótipo do colector de gases. Esta caracterização consistiu numa análise microestrutural e medição de macro e microdurezas. Além da caracterização inicial, foram aplicados um conjunto de tratamentos térmicos, de forma a estudar a possibilidade de eliminar os carbonetos presentes inicialmente nas fronteiras de grão. As principais conclusões deste trabalho são que o aço vazado apresenta potencial para ser uma escolha válida em diversas aplicações, devido a um leque alargado de propriedades apresentadas tipicamente por este material. Relativamente a aplicações estruturais, o aço vazado é vantajoso comparativamente ao ferro fundido, quando são requeridos, por exemplo, soldabilidade e elevada resistência, combinada com elevada tenacidade à fractura. Para componentes sujeitos a elevadas temperaturas de serviço, o aço inoxidável vazado é vantajoso quando usado a temperaturas superiores a 750°C, apesar do seu elevado custo. O tratamento térmico composto por um recozimento de solubilização seguido de envelhecimento, elimina quase na totalidade os carbonetos presentes nas fronteiras de grão e verifica-se um aumento de dureza através de uma precipitação de carbonetos finamente dispersos na matriz, que poderão também aumentar a resistência à fluência.

O impacto do perfil do utente da USF durante o seu internamento

RESUMO - Introdução: Através da elaboração do presente projeto de investigação pretendeu-se analisar o que poderá influenciar o custo total de um utente internado, inscrito numa USF, que foi seguidamente internado no setor hospitalar. Recorreu-se à base de dados de uma USF e de um hospital, ambos pertencentes à ARS Alentejo do ano de 2010. O objetivo central consiste em estudar a relação do volume de consultas da USF e se o tipo de admissão no hospital, sendo ela programada ou não programada, explica a variância o custo do internamento. Metodologia: Foi efetuado o cruzamento entre os dados dos utentes inscritos na USF e o total de internamento hospitalar, utilizando a sua data de nascimento e respetivo sexo. Após efetuado o cruzamento, através de um procedimento estatístico com base em SPSS, foram estipuladas pressupostos de forma a encontrar uma associação entre o custo do utente internado com as variáveis da base de dados da USF. De seguida, foi verificado se o tipo de admissão do internamento pode ou não influenciar o custo do internamento. Para efetuar tais correlações, optei por separar a amostra consoante alguns dos seus grupos mais frequentes, em que foi desagregado os internamentos referentes ao GCD 14 – Gravidez, Parto e Puerpério e dos utentes pertencentes ao escalão etários dos idosos (mais de 64 anos). Resultados: A variável da idade do utente é a que mais poderá explicar a variância do custo do internamento, apresentando sempre valores significativos para tal relação. As restantes pouco ou nada podem explicar a variância do custo do internamento. Quanto à tipologia de admissão, o facto de ser programado poderá explicar a diminuição dos dias de internamento, que concomitantemente poderá diminuir o custo do internamento, devido a forte correlação existente entre elas (r=0,666). Conclusão: A introdução da integração dos cuidados de saúde a nível primário e secundário poderá ser a solução base para a redução dos gastos desnecessários na saúde. Um maior acompanhamento do utente nos CSP poderá reduzir a frequência hospitalar, como verificamos que as variáveis da USF e o facto de a consulta ser programada podem explicar tal variância.

Influence d’un rince-bouche fluoré sur la corrosion galvanique entre un fil NiTi ou un fil CuNiTi et différents boîtiers orthodontiques : incidence sur les propriétés mécaniques des fils

Objectif : il a été rapporté que l’utilisation d’agents prophylactiques fluorés pouvait favoriser la corrosion galvanique au sein des alliages de titane. L’objectif de la présente étude était d’évaluer l’effet d’un rince-bouche fluoré sur les propriétés mécaniques de fils en nickel-titane (NiTi) et de fils en cuivre-nickel-titane (CuNiTi) lorsque ces derniers sont couplés à des boîtiers de compositions différentes (boîtiers de marques Smartclip, Clarity, et Sprint). Matériels et Méthodes : 90 segments de fils en NiTi et 90 segments de fils en CuNiTi ont été chacun couplés à 2 boîtiers de chaque marque. Chaque assemblage fil-boîtiers a été par la suite incubé pendant 3 heures à 37°C, soit dans une solution de fluore neutre (Fluorinse™ 0,05% NaF), soit dans une solution de salive artificielle (solution contrôle). Suite à l’incubation, les échantillons étaient nettoyés avec de l’eau déshydrogénée, les fils séparés des boîtiers et montés sur un support pour subir un test de pliage en trois points en milieu humide (salive artificielle) à 37°C. Les modules d’élasticité ainsi que les limites conventionnelles d’élasticité en activation et en désactivation ont été mesurés et comparés. Des analyses de Variance (ANOVA) et des comparaisons post-hoc avec la correction de Bonferronni ont été utilisées pour comparer les groupes entre eux (α = 0,05). Résultats : L’utilisation d’un rince-bouche fluoré a produit une réduction du module d’élasticité et de la limite conventionnelle d’élasticité en activation et en désactivation pour les fils en NiTi ; cependant, cet effet a été modulé par le type de boîtier auquel le fil a été couplé. Les propriétés mécaniques de fils en CuNiTi n’ont pas été affectées par le fluor, ou par le type de boîtier utilisé. Conclusions : L’utilisation d’un rince-bouche fluoré modifie les propriétés mécaniques des fils en NiTi seulement. Cet effet est modulé par le boîtier auquel le fil en NiTi est couplé. A la différence des autres études publiées dans la littérature, nos résultats ne nous permettent pas de conclure que la modification des propriétés mécaniques des fils en NiTi entrainerait obligatoirement un allongement de la durée du traitement orthodontique. Mots clés : Fluor, fils nickel-titane, boîtiers orthodontiques, corrosion galvanique, propriétés mécaniques.

Une évaluation de la dimension de la lumière de boîtiers 0,018" provenant de quatre différents manufacturiers. Existe-t-il un standard dans l’industrie?

Introduction: The objective of this experimental research was to evaluate the slot’s vertical dimension and profile of four different 0.018″ self-ligating brackets and to identify the level of tolerance accepted by manufacturers during the fabrication process. It was then possible to calculate and compare the torque play of those brackets using the measured values and the nominal values. Material and Methods: Twenty-five 0.018″ self-ligating brackets of upper left central incisors from the following manufacturers, Speed® (Strite Industries, Cambridge, Ontario, Canada), InOvationR® (GAC, Bohemia, NY, USA), CarriereLX® (Ortho Organizers, Carlsbad, CA, USA) and SmartClip® (3M Unitek, Monrovia, CA, USA), were evaluated using electron microscopy with 150X images. The height of each bracket was measured at every 100 microns of depth from the lingual wall at five different levels. A Student T test was then used to compare our results with the manufacturer’s stated value of 0.018″. To determine if there was a significant difference between the four manufacturers, analysis of variance (ANOVA) was performed at the significance level of p<0.05. The torque play was then calculated using geometrical formulas. Results: On average, Speed brackets were oversized by 2.7%[MV 0.0185″ (SD:0.002)], InOvationR by 3.7% [MV 0.0187″ (SD:0.002)], CarriereLX by 3.2% [MV 0.0186″ (SD:0.002)] and SmartClipSL by 5.0% [MV 0.0189″ (SD:0.002)]. The height of all brackets was significantly higher than the nominal value of 0.018″ (p<0.001). The slot of SmartClip brackets was significantly larger than those of the other three manufacturers (p<0.001). None of the brackets studied had parallel gingival and occlusal walls; some were convergent and others divergent. These variations can induce a torque play up to 4.5 degrees with a 0.017″x0.025″ wire and 8.0 degrees with a 0.016″x0.022″ wire. Conclusion: All studied brackets were oversized. None of the brackets studied had parallel gingival and occlusal walls and there was no standard between manufacturers for the geometry of their slots. These variations can cause a slight increase of the torque play between the wire and the bracket compared with the nominal value.

Indirect Bonding Method: in vitro Comparison of the Shear Bond Strength between Metallic Orthodontic Brackets and Different Porcelain Surface Preparations

Introduction : La force d’adhésion à l'interface métal-céramique avec les résines auto-polymérisantes destinées au collage indirect des boîtiers orthodontiques n'a pas été évaluée à ce jour et un protocole clinique basé sur la littérature scientifique est inexistant. Objectifs : 1) Comparer la force de cisaillement maximale entre des boîtiers métalliques et des surfaces en porcelaine préparées selon différentes méthodes; 2) Suggérer un protocole clinique efficace et prévisible. Matériel et méthodes : Quatre-vingt-dix disques en leucite (6 groupes; n = 15/groupe) ont été préparés selon 6 combinaisons de traitements de surface : mécaniques (+ / - fraisage pour créer les rugosités) et chimiques (acide fluorhydrique, apprêt, silane). Des bases en résine composite Transbond XT (3M Unitek, Monrovia, California) faites sur mesure ont été collées avec le système de résine adhésive auto-polymérisante Sondhi A + B Rapid Set (3M Unitek, Monrovia, California). Les échantillons ont été préservés (H2O/24hrs), thermocyclés (500 cycles) et testés en cisaillement (Instron, Norwood, Massachusetts). Des mesures d’Index d’adhésif résiduel (IAR) ont été compilées. Des tests ANOVAs ont été réalisés sur les rangs étant donné que les données suivaient une distribution anormale et ont été ajustés selon Tukey. Un Kruskall-Wallis, U-Mann Whitney par comparaison pairée et une analyse de Weibull ont aussi été réalisés. Résultats : Les médianes des groupes varient entre 17.0 MPa (- fraisage + acide fluorhydrique) à 26.7 MPa (- fraisage + acide fluorhydrique + silane). Le fraisage en surface ne semble pas affecter l’adhésion. La combinaison chimique (- fraisage + silane + apprêt) a démontré des forces de cisaillement significativement plus élevées que le traitement avec (- fraisage + acide fluorhydrique), p<0,05, tout en possédant des forces similaires au protocole typiquement suggéré à l’acide fluorhydrique suivi d’une application de silane, l’équivalence de (- fraisage + acide fluorhydrique + silane). Les mesures d’IAR sont significativement plus basses dans le groupe (- fraisage + acide fluorhydrique) en comparaison avec celles des 5 autres groupes, avec p<0,05. Malheureusement, ces 5 groupes ont des taux de fracture élévés de 80 à 100% suite à la décimentation des boîtiers. Conclusion : Toutes les combinaisons de traitement de surface testées offrent une force d’adhésion cliniquement suffisante pour accomplir les mouvements dentaires en orthodontie. Une application de silane suivie d’un apprêt est forte intéressante, car elle est simple à appliquer cliniquement tout en permettant une excellente adhésion. Il faut cependant avertir les patients qu’il y a un risque de fracture des restorations en céramique lorsque vient le moment d’enlever les broches. Si la priorité est de diminuer le risque d’endommager la porcelaine, un mordançage seul à l’acide hydrofluorique sera suffisant.

Comparaison de la perception de la douleur entre le traitement orthodontique avec Invisalign® et le traitement avec fils et boîtiers fixes

Introduction : L’inconfort causé par les appareils orthodontiques peut significativement affecter la coopération des patients dans leur traitement. La douleur, ainsi que la détérioration de la fonction (mastication, élocution) sont reconnus comme les déterminants majeurs de la coopération des patients traités par appareils amovibles. Invisalign® se positionne comme une alternative esthétique aux multiples inconforts observés lors des traitements fixes avec boîtiers. À ce jour, peu d’études ont cherché à comparer la douleur (quantitativement et qualitativement) perçue entre cette technique et celle avec boîtiers fixes sur une longue période. Objectif : L’objectif de la présente étude est d’évaluer la douleur ressentie par les patients qui suivent un traitement orthodontique avec coquilles correctrices Invisalign® et de la comparer avec celle des patients qui suivent un traitement orthodontique conventionnel avec des boîtiers fixes. Matériels et Méthodes: L’étude compte 70 patients (29 garçons, 41 filles), moyenne d’âge de 16 ans [11 à 30]. Les trois sous-groupes sont Invisalign® (n=31), boîtiers Damon (n=19) et boîtiers Speed (n=20). Les groupes avec boîtiers (Damon et Speed) sont les 2 groupes de l’étude menée au sein de la clinique d’Orthodontie de l’Université de Montréal en 2011 qui comparait la perception de la douleur durant le traitement orthodontique entre boîtiers auto-ligaturants passifs et actifs. L’étude a été organisée en 4 phases correspondant à l’insertion des 4 premiers fils pour les groupes avec boîtiers (Phase 1: 0,016" Supercable, Phase 2: 0,016" CuNiTi, Phase 3: 0,016"x0,022" CuNiTi, Phase 4: 0,019"x0,025" CuNiTi) et à l’insertion des coquilles 1, 4, 7 et 10 pour le groupe Invisalign®. À l’aide d’un questionnaire, l’étude évalue pour chaque phase l’ampleur (grâce à une échelle visuelle analogue EVA), la durée et la localisation de la douleur à 6 différents points (T1: immédiatement après l’insertion, T2: 5h après, T3: 24h après, T4: 3 jours après, T5: une semaine après, T6: 2 semaines après). Résultats: À T1Ph3 le pourcentage de patients rapportant de la douleur était plus élevé avec Damon qu’avec Invisalign® (p=0,032) (Damon=55,6% ; Invisalign®=23,3%) mais il n’y avait pas de différence avec le groupe Speed (p=0,114). Les patients avec Invisalign® rapportaient significativement moins d’irritation des tissus mous (muqueuses, gencives) que les patients avec des boîtiers. Pour les résultats des EVA, les différences étaient statistiquement significatives à 2 temps : T3Ph1 (Médiane Invisalign®=33,31, Médiane Speed=49,47; p=0,025) et T3Ph4 (Médiane Invisalign®=13,15, Médiane Damon=27,28; p=0,014). Pour la majorité des patients la douleur ne nécessitait pas la prise de médicament et il n’y avait pas de différence significative entre les groupes sur ce point. La qualité de vie était légèrement affectée lors de la première phase et moindrement pour le groupe Invisalign® que pour les groupes avec boîtiers. Pour les patients Invisalign®, la douleur atteignait son niveau le plus élevé entre 5 et 24 heures après l’insertion de la première coquille, et diminuait en intensité et en durée à chaque phase. Conclusion: La perception de la douleur lors d’un traitement orthodontique avec Invisalign® est inférieure à celle ressentie lors d’un traitement avec des boîtiers fixes. Cette méthode de traitement est donc une thérapie attirante pour les patients désirant un traitement esthétique et relativement confortable.

On Vessiot's Theory of Partial Differential Equations

The object of research presented here is Vessiot's theory of partial differential equations: for a given differential equation one constructs a distribution both tangential to the differential equation and contained within the contact distribution of the jet bundle. Then within it, one seeks n-dimensional subdistributions which are transversal to the base manifold, the integral distributions. These consist of integral elements, and these again shall be adapted so that they make a subdistribution which closes under the Lie-bracket. This then is called a flat Vessiot connection. Solutions to the differential equation may be regarded as integral manifolds of these distributions. In the first part of the thesis, I give a survey of the present state of the formal theory of partial differential equations: one regards differential equations as fibred submanifolds in a suitable jet bundle and considers formal integrability and the stronger notion of involutivity of differential equations for analyzing their solvability. An arbitrary system may (locally) be represented in reduced Cartan normal form. This leads to a natural description of its geometric symbol. The Vessiot distribution now can be split into the direct sum of the symbol and a horizontal complement (which is not unique). The n-dimensional subdistributions which close under the Lie bracket and are transversal to the base manifold are the sought tangential approximations for the solutions of the differential equation. It is now possible to show their existence by analyzing the structure equations. Vessiot's theory is now based on a rigorous foundation. Furthermore, the relation between Vessiot's approach and the crucial notions of the formal theory (like formal integrability and involutivity of differential equations) is clarified. The possible obstructions to involution of a differential equation are deduced explicitly. In the second part of the thesis it is shown that Vessiot's approach for the construction of the wanted distributions step by step succeeds if, and only if, the given system is involutive. Firstly, an existence theorem for integral distributions is proven. Then an existence theorem for flat Vessiot connections is shown. The differential-geometric structure of the basic systems is analyzed and simplified, as compared to those of other approaches, in particular the structure equations which are considered for the proofs of the existence theorems: here, they are a set of linear equations and an involutive system of differential equations. The definition of integral elements given here links Vessiot theory and the dual Cartan-Kähler theory of exterior systems. The analysis of the structure equations not only yields theoretical insight but also produces an algorithm which can be used to derive the coefficients of the vector fields, which span the integral distributions, explicitly. Therefore implementing the algorithm in the computer algebra system MuPAD now is possible.

Regional climate impacts of a possible future grand solar minimum

Any reduction in global mean near-surface temperature due to a future decline in solar activity is likely to be a small fraction of projected anthropogenic warming. However, variability in ultraviolet solar irradiance is linked to modulation of the Arctic and North Atlantic Oscillations, suggesting the potential for larger regional surface climate effects. Here, we explore possible impacts through two experiments designed to bracket uncertainty in ultraviolet irradiance in a scenario in which future solar activity decreases to Maunder Minimum-like conditions by 2050. Both experiments show regional structure in the wintertime response, resembling the North Atlantic Oscillation, with enhanced relative cooling over northern Eurasia and the eastern United States. For a high-end decline in solar ultraviolet irradiance, the impact on winter northern European surface temperatures over the late twenty-first century could be a significant fraction of the difference in climate change between plausible AR5 scenarios of greenhouse gas concentrations.

Trends in systemic lupus erythematosus mortality rates in the state of Sao Paulo, Brazil from 1985 to 2004

Objectives To estimate mortality rates and mortality trends from SLE in the state of Sao Paulo, Brazil. Material and methods The official data bank was used to study all deaths occurred from 1985 to 2004 in which SLE was mentioned as the underlying cause of death. Besides the overall mortality rate, the annual gender- and age-specific mortality rates were estimated for each calendar year by age bracket (0-19 years, 20-39 years, 40-59 years and over 60 years) and for the sub-periods 1985-1995 (first) and 1996-2004 (second), by decades. Chi-square test was used to compare the mortality rates between the two periods, as well the mortality rates according to educational level considering years of study. Pearson correlation coefficient test was used to analyse mortality trends. The crude rates were adjusted for age by the direct method, using the standard Brazilian population in 2000. Results A total of 2,601 deaths (90% female) attributed to SLE were analysed. The mean age at death was significantly higher in the second than in the first sub-period (36.6 +/- 15.6 years vs. 33.9 +/- 14.0 years; p<0.001). The overall adjusted mortality rate was 3.8 deaths/million habitants/year for the entire period and 3.4 deaths/million inhabitants/year for the first and 4.0 deaths/million inhabitants/year for the second sub-period (p<0.001). In each calendar year, the mortality rate was significantly lower for the better educated group. Throughout the period, there was a significant increase in mortality rates only among women over 40. Conclusion SLE patients living in the state of Silo Paulo still die at younger ages than those living in developed countries. Our data do not support the theory that there was an improvement in the SLE mortality rate in the last 20 years in the state of Sao Paulo. Socio-economic factors, such as the difficulty to get medical care and adequate treatment, may be the main factors to explain the worst prognosis for our patients.

Caries, gender and socio-economic change in the Xavante Indians from Central Brazil

Background: The oral health conditions of indigenous peoples in Amazonia are closely associated with ecological and dietary changes related to interaction with non-Indians. Aim: The study investigated the incidence of caries in an indigenous community from Central Brazil focusing on gender differences. Subjects and methods: The research was conducted among the Xavante Indians and was based on longitudinal data collected in two surveys (1999 and 2004). The study included 128 individuals, 63 (49.2%) males and 65 (50.8%) females, divided in four age brackets (6-12, 13-19, 20-34, 35-60 years of age). The DMFT (decayed, missing and filled teeth) index and incidences (difference between 1999 and 2004) were calculated for each individual. The proportion of incidence was also calculated. Differences in caries risk between gender and age brackets were compared by parametric and non-parametric tests. Results: There were statistically significant differences in relation to caries incidence between age brackets and gender. The greatest incidence was observed in the 20-34 age bracket, which presented 3.30 new decayed teeth, twice the risk of the 6-12 age bracket (p0.01), chosen as reference. While females in most age groups did not show higher risk for caries when compared to males, there was a 4.04-fold risk in the 20-34 age bracket (p0.01). Conclusion: It is concluded that factors related to the social functions of each sex (gender issues) and differential access to information, health services, and education may help to understand the differences observed in the incidence of caries.

Orthodontic brackets removal under shear and tensile bond strength resistance tests - a comparative test between light sources

We have investigated if a new LEDs system has enough efficient energy to promote efficient shear and tensile bonding strength resistance under standardized tests. LEDs 470 +/- 10 nm can be used to photocure composite during bracket fixation. Advantages considering resistance to tensile and shear bonding strength when these systems were used are necessary to justify their clinical use. Forty eight human extracted premolars teeth and two light sources were selected, one halogen lamp and a LEDs system. Brackets for premolar were bonded through composite resin. Samples were submitted to standardized tests. A comparison between used sources under shear bonding strength test, obtained similar results; however, tensile bonding test showed distinct results: a statistical difference at a level of 1% between exposure times (40 and 60 seconds) and even to an interaction between light source and exposure time. The best result was obtained with halogen lamp use by 60 seconds, even during re-bonding; however LEDs system can be used for bonding and re-bonding brackets if power density could be increased.

Crystallographic variant selection in α–β brass

The transformation texture of α/β brass with a diffusional Widmanstätten α growth morphology has been investigated. Electron micrographs and electron backscattered diffraction was used to determine that the orientation relationship between the β phase and the α associated with nucleation at β grain boundaries was (44.3°) left angle bracket1 1 6right-pointing angle bracket. Crystallographic variant selection was observed across those prior β/β grain boundaries, but this has little effect on the transformation texture due to the crystal symmetry. The effect of the crystallographic variant selection on texture is further weakened by nucleation of diffusional transformed α in the grain interior.

The cost of seasonal respiratory illnesses in Australian children: the dominance of patient and family costs and implications for vaccine use

Respiratory viral infections are one of the next group of diseases likely to be targeted for prevention in childhood by the use of vaccines. To begin collecting necessary epidemiology and cost information about the illnesses caused by these viruses, we conducted a prospective cohort study in 118 Melbourne children between 12 and 71 months of age during winter and spring 2001. We were interested in calculating an average cost per episode of community-managed acute respiratory disease, in identifying the key cost drivers of such illness, and to identify the proportion of costs borne by the patient and family. There were 202 community-managed influenza-like illnesses identified between July and December 2001, generating 89 general practitioner visits, and 42 antibiotic prescriptions. The average cost of community-managed episodes (without hospitalisation) was $241 (95% CI $191 to $291), with the key cost drivers being carer time away from usual activities caring for the ill child (70% of costs), use of non-prescription medications (5.4%), and general practice visits (5.0%). The patient and family met 87per cent of total costs. The lowest average cost occurred in households from the highest income bracket. Acute respiratory illness managed in the community is common, with the responsibility for meeting the cost of episodes predominantly borne by the patient and family in the form of lost productivity. These findings have implications for preventive strategies in children, such as the individual use of, or implementation of public programs using, currently available vaccines against influenza and vaccines under development against other viral respiratory pathogens.

Standard voting power indices work : an experimental investigation of pure voting power

We evaluate power indices by experimentally measuring the political power embodied in blocks of votes per se. Subjects with differing votes divide a fixed purse by majority rule in online chat rooms under supermision. Chat rooms and processes for selecting subjects reduce or eliminate extraeous political forces leaving logrolling as the primary political force. Results show that various power indices bracket voting power which is more than proportionally concentrated in large players.