Comprehensive Two-Dimensional Gas Chromatography: Instrumental and Methodological Development

Comprehensive two-dimensional gas chromatography (GC×GC) offers enhanced separation efficiency, reliability in qualitative and quantitative analysis, capability to detect low quantities, and information on the whole sample and its components. These features are essential in the analysis of complex samples, in which the number of compounds may be large or the analytes of interest are present at trace level. This study involved the development of instrumentation, data analysis programs and methodologies for GC×GC and their application in studies on qualitative and quantitative aspects of GC×GC analysis. Environmental samples were used as model samples. Instrumental development comprised the construction of three versions of a semi-rotating cryogenic modulator in which modulation was based on two-step cryogenic trapping with continuously flowing carbon dioxide as coolant. Two-step trapping was achieved by rotating the nozzle spraying the carbon dioxide with a motor. The fastest rotation and highest modulation frequency were achieved with a permanent magnetic motor, and modulation was most accurate when the motor was controlled with a microcontroller containing a quartz crystal. Heated wire resistors were unnecessary for the desorption step when liquid carbon dioxide was used as coolant. With use of the modulators developed in this study, the narrowest peaks were 75 ms at base. Three data analysis programs were developed allowing basic, comparison and identification operations. Basic operations enabled the visualisation of two-dimensional plots and the determination of retention times, peak heights and volumes. The overlaying feature in the comparison program allowed easy comparison of 2D plots. An automated identification procedure based on mass spectra and retention parameters allowed the qualitative analysis of data obtained by GC×GC and time-of-flight mass spectrometry. In the methodological development, sample preparation (extraction and clean-up) and GC×GC methods were developed for the analysis of atmospheric aerosol and sediment samples. Dynamic sonication assisted extraction was well suited for atmospheric aerosols collected on a filter. A clean-up procedure utilising normal phase liquid chromatography with ultra violet detection worked well in the removal of aliphatic hydrocarbons from a sediment extract. GC×GC with flame ionisation detection or quadrupole mass spectrometry provided good reliability in the qualitative analysis of target analytes. However, GC×GC with time-of-flight mass spectrometry was needed in the analysis of unknowns. The automated identification procedure that was developed was efficient in the analysis of large data files, but manual search and analyst knowledge are invaluable as well. Quantitative analysis was examined in terms of calibration procedures and the effect of matrix compounds on GC×GC separation. In addition to calibration in GC×GC with summed peak areas or peak volumes, simplified area calibration based on normal GC signal can be used to quantify compounds in samples analysed by GC×GC so long as certain qualitative and quantitative prerequisites are met. In a study of the effect of matrix compounds on GC×GC separation, it was shown that quality of the separation of PAHs is not significantly disturbed by the amount of matrix and quantitativeness suffers only slightly in the presence of matrix and when the amount of target compounds is low. The benefits of GC×GC in the analysis of complex samples easily overcome some minor drawbacks of the technique. The developed instrumentation and methodologies performed well for environmental samples, but they could also be applied for other complex samples.

The need for speed: Timely prevention of the dispersal of noxious weeds in relief fodder using efficient sampling procedures

Invasive and noxious weeds are well known as a pervasive problem, imposing significant economic burdens on all areas of agriculture. Whilst there are multiple possible pathways of weed dispersal in this industry, of particular interest to this discussion is the unintended dispersal of weed seeds within fodder. During periods of drought or following natural disasters such as wild fire or flood, there arises the urgent need for 'relief' fodder to ensure survival and recovery of livestock. In emergency situations, relief fodder may be sourced from widely dispersed geographic regions, and some of these regions may be invaded by an extensive variety of weeds that are both exotic and detrimental to the intended destination for the fodder. Pasture hay is a common source of relief fodder and it typically consists of a mixture of grassy and broadleaf species that may include noxious weeds. When required urgently, pasture hay for relief fodder can be cut, baled, and transported over long distances in a short period of time, with little opportunity for prebaling inspection. It appears that, at the present time, there has been little effort towards rapid testing of bales, post-baling, for the presence of noxious weeds, as a measure to prevent dispersal of seeds. Published studies have relied on the analysis of relatively small numbers of bales, tested to destruction, in order to reveal seed species for identification and enumeration. The development of faster, more reliable, and non-destructive sampling methods is essential to increase the fodder industry's capacity to prevent the dispersal of noxious weeds to previously unaffected locales.

Enhanced processing of SPOT multispectral satellite imagery for environmental monitoring and modelling

The Taita Hills in southeastern Kenya form the northernmost part of Africa’s Eastern Arc Mountains, which have been identified by Conservation International as one of the top ten biodiversity hotspots on Earth. As with many areas of the developing world, over recent decades the Taita Hills have experienced significant population growth leading to associated major changes in land use and land cover (LULC), as well as escalating land degradation, particularly soil erosion. Multi-temporal medium resolution multispectral optical satellite data, such as imagery from the SPOT HRV, HRVIR, and HRG sensors, provides a valuable source of information for environmental monitoring and modelling at a landscape level at local and regional scales. However, utilization of multi-temporal SPOT data in quantitative remote sensing studies requires the removal of atmospheric effects and the derivation of surface reflectance factor. Furthermore, for areas of rugged terrain, such as the Taita Hills, topographic correction is necessary to derive comparable reflectance throughout a SPOT scene. Reliable monitoring of LULC change over time and modelling of land degradation and human population distribution and abundance are of crucial importance to sustainable development, natural resource management, biodiversity conservation, and understanding and mitigating climate change and its impacts. The main purpose of this thesis was to develop and validate enhanced processing of SPOT satellite imagery for use in environmental monitoring and modelling at a landscape level, in regions of the developing world with limited ancillary data availability. The Taita Hills formed the application study site, whilst the Helsinki metropolitan region was used as a control site for validation and assessment of the applied atmospheric correction techniques, where multiangular reflectance field measurements were taken and where horizontal visibility meteorological data concurrent with image acquisition were available. The proposed historical empirical line method (HELM) for absolute atmospheric correction was found to be the only applied technique that could derive surface reflectance factor within an RMSE of < 0.02 ps in the SPOT visible and near-infrared bands; an accuracy level identified as a benchmark for successful atmospheric correction. A multi-scale segmentation/object relationship modelling (MSS/ORM) approach was applied to map LULC in the Taita Hills from the multi-temporal SPOT imagery. This object-based procedure was shown to derive significant improvements over a uni-scale maximum-likelihood technique. The derived LULC data was used in combination with low cost GIS geospatial layers describing elevation, rainfall and soil type, to model degradation in the Taita Hills in the form of potential soil loss, utilizing the simple universal soil loss equation (USLE). Furthermore, human population distribution and abundance were modelled with satisfactory results using only SPOT and GIS derived data and non-Gaussian predictive modelling techniques. The SPOT derived LULC data was found to be unnecessary as a predictor because the first and second order image texture measurements had greater power to explain variation in dwelling unit occurrence and abundance. The ability of the procedures to be implemented locally in the developing world using low-cost or freely available data and software was considered. The techniques discussed in this thesis are considered equally applicable to other medium- and high-resolution optical satellite imagery, as well the utilized SPOT data.

Cereal cultivars can be ranked consistently for resistance to root-lesion nematodes (Pratylenchus thornei & P. neglectus) using diverse procedures

The root-lesion nematodes (RLN) Pratylenchus thornei and P. neglectus are widely distributed in Australian grain producing regions and can reduce the yield of intolerant wheat cultivars by up to 65 , costing the industry ~123 M AUD/year. Consequently, researchers in the northern, southern and western regions have independently developed procedures to evaluate the resistance of cereal cultivars to RLN. To compare results, each of the three laboratories phenotyped a set of 26 and 36 cereal cultivars for relative resistance/susceptibility to P. thornei and P. neglectus respectively. The northern and southern regions also investigated the effects of planting time and experiment duration on RLN reproduction and cultivar ranking. Results show the genetic correlation between cultivars tested using the northern and southern procedures evaluating P. thornei resistance was 0.93. Genetic correlations between experiments using the same procedure, but with different planting times, were 0.99 for both northern and southern procedures. The genetic correlation between cultivars tested using the northern, southern and western procedures evaluating P. neglectus resistance ranged from 0.71 to 0.95. Genetic correlations between experiments using the same procedure but with different planting times ranged from 0.91 to 0.99. This study established that, even though experiments were conducted in different geographic locations and with different trial management practices, the diverse nematode resistance screening procedures ranked cultivars similarly. Consequently, RLN resistance data can be pooled across regions to provide national consensus ratings of cultivars.

Improved procedures for static and dynamic analyses of wrinkled membranes

An analysis of large deformations of flexible membrane structures within the tension field theory is considered. A modification-of the finite element procedure by Roddeman et al. (Roddeman, D. G., Drukker J., Oomens, C. W J., Janssen, J. D., 1987, ASME J. Appl. Mech. 54, pp. 884-892) is proposed to study the wrinkling behavior of a membrane element. The state of stress in the element is determined through a modified deformation gradient corresponding to a fictive nonwrinkled surface. The new model uses a continuously modified deformation gradient to capture the location orientation of wrinkles more precisely. It is argued that the fictive nonwrinkled surface may be looked upon as an everywhere-taut surface in the limit as the minor (tensile) principal stresses over the wrinkled portions go to zero. Accordingly, the modified deformation gradient is thought of as the limit of a sequence of everywhere-differentiable tensors. Under dynamic excitations, the governing equations are weakly projected to arrive at a system of nonlinear ordinary differential equations that is solved using different integration schemes. It is concluded that, implicit integrators work much better than explicit ones in the present context.

Semi-empirical procedures for estimation of residual velocity and ballistic limit for impact on mild steel plates by projectiles

This paper deals with the development of simplified semi-empirical relations for the prediction of residual velocities of small calibre projectiles impacting on mild steel target plates, normally or at an angle, and the ballistic limits for such plates. It has been shown, for several impact cases for which test results on perforation of mild steel plates are available, that most of the existing semi-empirical relations which are applicable only to normal projectile impact do not yield satisfactory estimations of residual velocity. Furthermore, it is difficult to quantify some of the empirical parameters present in these relations for a given problem. With an eye towards simplicity and ease of use, two new regression-based relations employing standard material parameters have been discussed here for predicting residual velocity and ballistic limit for both normal and oblique impact. The latter expressions differ in terms of usage of quasi-static or strain rate-dependent average plate material strength. Residual velocities yielded by the present semi-empirical models compare well with the experimental results. Additionally, ballistic limits from these relations show close correlation with the corresponding finite element-based predictions.

Incremental attribute evaluation through recursive procedures

Incremental semantic analysis in a programming environment based on Attribute Grammars is performed by an Incremental Attribute Evaluator (IAE). Current IAEs are either table-driven or make extensive use of graph structures to schedule reevaluation of attributes. A method of compiling an Ordered Attribute Grammar into mutually recursive procedures is proposed. These procedures form an optimal time Incremental Attribute Evaluator for the attribute grammar, which does not require any graphs or tables.

Improved procedures for the Beckmann rearrangement: the reaction of ketoxime carbonates with boron trifluoride etherate

A variety of ketoxime ethyl carbonates-easily prepared from the oximes and ethyl chloroformate-undergo the Beckmann rearrangement upon treatment with 1 equivalent of boron trifluoride etherate, in dichloromethane solution at room temperature in excellent yields (generally 75-99%). (C) 2000 Elsevier Science Ltd. All rights reserved.

Improved procedures for the Beckmann rearrangement: the reaction of ketoxime carbonates with boron trifluoride etherate

A variety of ketoxime ethyl carbonates-easily prepared from the oximes and ethyl chloroformate-undergo the Beckmann rearrangement upon treatment with 1 equivalent of boron trifluoride etherate, in dichloromethane solution at room temperature in excellent yields (generally 75-99%). (C) 2000 Elsevier Science Ltd. All rights reserved.

Evidence in European Asylum Procedures

This thesis explores the particular framework of evidentiary assessment of three selected appellate national asylum procedures in Europe and discusses the relationship between these procedures, on the one hand, and between these procedures and other legal systems, including the EU legal order and international law, on the other. A theme running throughout the thesis is the EU strivings towards approximation of national asylum procedures and my study analyses the evidentiary assessment of national procedures with the aim of pinpointing similarities and differences, and the influences which affect these distinctions. The thesis first explores the frames construed for national evidentiary solutions by studying the object of decision-making and the impact of legal systems outside the national. Second, the study analyses the factual evidentiary assessment of three national procedures - German, Finnish and English. Thirdly, the study explores the interrelationship between these procedures and the legal systems influencing them and poses questions in relation to the strivings of EU and methods of convergence. The thesis begins by stating the framework and starting points for the research. It moves on to establish keys of comparison concerning four elements of evidentiary assessment that are of importance to any appellate asylum procedure, and that can be compared between national procedures, on the one hand, and between international, regional and national frameworks, on the other. Four keys of comparison are established: the burden of proof, demands for evidentiary robustness, the standard of proof and requirements for the methods of evidentiary assessment. These keys of comparison are then identified in three national appellate asylum procedures, and in order to come to conclusions on the evidentiary standards of the appellate asylum procedures, relevant elements of the asylum procedures in general are presented. Further, institutional, formal and procedural matters which have an impact on the evidentiary standards in the national appellate procedures are analysed. From there, the thesis moves on to establish the relationship between national evidentiary standards and the legal systems which affect them, and gives reasons for similarities and divergences. Further, the thesis studies the impact of the national frameworks on the regional and international level. Lastly, the dissertation makes a de lege ferenda survey of the relationship between EU developments, the goal of harmonization in relation to national asylum procedures and the particular feature of evidentiary standards in national appellate asylum procedures. Methodology The thesis follows legal dogmatic methods. The aim is to analyse legal norms and legal constructions and give them content and context. My study takes as its outset an understanding of the purposes for legal research also regarding evidence and asylum to determine the contents of valid law through analysis and systematization. However, as evidentiary issues traditionally are normatively vaguely defined, a strict traditional normative dogmatic approach is not applied. For the same reason a traditionalist and strict legal positivism is not applied. The dogmatics applied to the analysis of the study is supported by practical analysis. The aim is not only to reach conclusions concerning the contents of legal norms and the requirements of law, but also to study the use and practical functioning of these norms, giving them a practcial context. Further, the study relies on a comparative method. A functionalist comparative method is employed and keys of comparison are found in evidentiary standards of three selected national appellate asylum procedures. The functioning equivalences of German, Finnish and English evidentiary standards of appellate asylum procedures are compared, and they are positioned in an European and international legal setting. Research Results The thesis provides results regarding the use of evidence in national appellate asylum procedures. It is established that evidentiary solutions do indeed impact on the asylum procedure and that the results of the procedure are dependent on the evidentiary solutions made in the procedures. Variations in, amongst other things, the interpretation of the burden of proof, the applied standard of proof and the method for determining evidentiary value, are analysed. It is established that national impacts play an important role in the adaptation of national appellate procedures to external requirements. Further, it is established that the impact of national procedures on as well the international framework as on EU law varies between the studied countries, partly depending on the position of the Member State in legislative advances at the EU level. In this comparative study it is, further, established that the impact of EU requirements concerning evidentiary issues may be have positive as well as negative effects with regard to the desired harmonization. It is also concluded that harmonization using means of convergence that primaly target legal frameworks may not in all instances be optimal in relation to evidentiary standards, and that more varied and pragmatic means of convergence must be introduced in order to secure harmonization also in terms of evidence. To date, legal culture and traditions seem to prevail over direct efforts at procedural harmonization.

Dissociation of monoclonal antibody-antigen complexes: Implications for ELISA procedures

A single step solid phase radioimmunoassay (SS-SPRIA) has been developed for human chorionic,gonadotropin (hCG) using monoclonal antibodies (MAb) from culture media adsorbed immunochemically on plastic tubes. The assays have been found to be very simple in terms of operation and do not demand purification of MAbs. Several MAbs which do not show any displacement in liquid phase RIA and ELISA provide a satisfactory SS-SPRIA. Our investigations revealed that the assumption regarding the stability of the primary Mab-Ag complex during incubation and washing steps in ELISAs is not strictly valid for dissociable MAbs. A comparison of different assay systems suggests that the single step SPRIA offers additional advantages over conventionally used multistep ELISA procedures and provides a quantitative probe for the analysis of epitope-paratope interactions.

Study of Layering Procedures in Finite-Element Analysis of RC Flexural and Torsional Elements

A new postcracking formulation for concrete, along with both implicit and explicit layering procedures, is used in the analysis of reinforced-concrete (RC) flexural and torsional elements. The postcracking formulation accounts for tension stiffening in concrete along the rebar directions, compression softening in cracked concrete based on either stresses or strains, and aggregate interlock based on crack-confining normal stresses. Transverse shear stresses computed using the layering procedures are included in material model considerations that permit the development of inclined cracks through the RC cross section. Examples of a beam analyzed by both the layering techniques, a torsional element, and a column-slab connection region analyzed by the implicit layering procedure are presented here. The study highlights the primary advantages and disadvantages of each layering approach, identifying the class of problems where the application of either procedure is more suitable.

Discrimination of Nuclear Grade Steel Samples Subjected to Different Heat Treatment Procedures Based on Acoustic Emission (AE) Data Profiling at Crack Initiation

The present work is an attempt to study crack initiation in nuclear grade, 9Cr-1Mo ferritic steel using AE as an online NDE tool. Laboratory experiments were conducted on 5 heat treated Compact Tension (CT) specimens made out of nuclear grade 9Cr-1Mo ferritic steel by subjecting them to cyclic tensile load. The CT Specimens were of 12.5 mm thickness. The Acoustic emission test system was setup to acquire the data continuously during the test by mounting AE sensor on one of the surfaces of the specimen. This was done to characterize AE data pertaining to crack initiation and then discriminate the samples in terms of their heat treatment processes based on AE data. The AE signatures at crack initiation could conclusively bring to fore the heat treatment distinction on a sample to sample basis in a qualitative sense.Thus, the results obtained through these investigations establish a step forward in utilizing AE technique as an on-line measurement tool for accurate detection and understanding of crack initiation and its profile in 9Cr-1Mo nuclear grade steel subjected to different processes of heat treatment.