A study of clearance intervals, flashing operation, and left-turn phasing at traffic signals. Volume 3: flashing operation. Final report.

Federal Highway Administration, Office of Research and Development, Washington, D.C.

Demand-responsive decentralized urban traffic control : part 1, single-intersection policies /

"February 1982."

Computerized allocation of police traffic services; a demonstration study. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Computerized allocation of police traffic services; reference volume I. Computer-sensor system description. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Guidelines for flashing traffic control devices. Final report.

Federal Highway Administration, Office of Research and Development, Washington, D.C.

Traffic models overview handbook.

Federal Highway Administration, Office of Traffic Management and IVHS, Washington, D.C.

NETGRAF: a computer graphics aid to the operation and interpretation of NETSIM, a traffic simulation model. Part 1: overview and experimental results. Final report.

Transportation Department, Office of University Research, Washington, D.C.

NETGRAF: a computer graphics aid to the operation and interpretation of NETSIM, a traffic simulation model. Part 3: programmer's guide.

Transportation Department, Office of University Research, Washington, D.C.

Traffic mitigation and demand management : summary of national experience and potential applications in New York /

"DOT-I-88-02"--Cover.

Curbside pickup and delivery operations and arterial traffic impacts /

Mode of access: Internet.

Optimization of traffic signal controls within equilibrium route choice models : final report to Illinois Department of Transpotation/

Cover title.

Selection of traffic controls for severe weather conditons /

Final report, issued March 1977.

Effects of taper length on traffic operations in construction zones /

Final report; December 1977.

An automatic tuning strategy for local fuzzy logic ramp metering algorithm using Particle Swarm Optimization (PSO)

Freeway systems are becoming more congested each day. One contribution to freeway traffic congestion comprises platoons of on-ramp traffic merging into freeway mainlines. As a relatively low-cost countermeasure to the problem, ramp meters are being deployed in both directions of an 11-mile section of I-95 in Miami-Dade County, Florida. The local Fuzzy Logic (FL) ramp metering algorithm implemented in Seattle, Washington, has been selected for deployment. The FL ramp metering algorithm is powered by the Fuzzy Logic Controller (FLC). The FLC depends on a series of parameters that can significantly alter the behavior of the controller, thus affecting the performance of ramp meters. However, the most suitable values for these parameters are often difficult to determine, as they vary with current traffic conditions. Thus, for optimum performance, the parameter values must be fine-tuned. This research presents a new method of fine tuning the FLC parameters using Particle Swarm Optimization (PSO). PSO attempts to optimize several important parameters of the FLC. The objective function of the optimization model incorporates the METANET macroscopic traffic flow model to minimize delay time, subject to the constraints of reasonable ranges of ramp metering rates and FLC parameters. To further improve the performance, a short-term traffic forecasting module using a discrete Kalman filter was incorporated to predict the downstream freeway mainline occupancy. This helps to detect the presence of downstream bottlenecks. The CORSIM microscopic simulation model was selected as the platform to evaluate the performance of the proposed PSO tuning strategy. The ramp-metering algorithm incorporating the tuning strategy was implemented using CORSIM's run-time extension (RTE) and was tested on the aforementioned I-95 corridor. The performance of the FLC with PSO tuning was compared with the performance of the existing FLC without PSO tuning. The results show that the FLC with PSO tuning outperforms the existing FL metering, fixed-time metering, and existing conditions without metering in terms of total travel time savings, average speed, and system-wide throughput.

Hybrid approaches to estimating freeway travel times using point traffic detector data

The accurate and reliable estimation of travel time based on point detector data is needed to support Intelligent Transportation System (ITS) applications. It has been found that the quality of travel time estimation is a function of the method used in the estimation and varies for different traffic conditions. In this study, two hybrid on-line travel time estimation models, and their corresponding off-line methods, were developed to achieve better estimation performance under various traffic conditions, including recurrent congestion and incidents. The first model combines the Mid-Point method, which is a speed-based method, with a traffic flow-based method. The second model integrates two speed-based methods: the Mid-Point method and the Minimum Speed method. In both models, the switch between travel time estimation methods is based on the congestion level and queue status automatically identified by clustering analysis. During incident conditions with rapidly changing queue lengths, shock wave analysis-based refinements are applied for on-line estimation to capture the fast queue propagation and recovery. Travel time estimates obtained from existing speed-based methods, traffic flow-based methods, and the models developed were tested using both simulation and real-world data. The results indicate that all tested methods performed at an acceptable level during periods of low congestion. However, their performances vary with an increase in congestion. Comparisons with other estimation methods also show that the developed hybrid models perform well in all cases. Further comparisons between the on-line and off-line travel time estimation methods reveal that off-line methods perform significantly better only during fast-changing congested conditions, such as during incidents. The impacts of major influential factors on the performance of travel time estimation, including data preprocessing procedures, detector errors, detector spacing, frequency of travel time updates to traveler information devices, travel time link length, and posted travel time range, were investigated in this study. The results show that these factors have more significant impacts on the estimation accuracy and reliability under congested conditions than during uncongested conditions. For the incident conditions, the estimation quality improves with the use of a short rolling period for data smoothing, more accurate detector data, and frequent travel time updates.