Direct torque control em máquinas assíncronas

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Energy Harvesting for Autonomous Underwater Vehicles

In this study, energy production for autonomous underwater vehicles is investigated. This project is part of a bigger project called TURTLE. The autonomous vehicles perform oceanic researches at seabed for which they are intended to be kept operational underwater for several months. In order to ful l a long-term underwater condition, powerful batteries are combined with \micro- scale" energy production on the spot. This work tends to develop a system that generates power up to a maximum of 30 W. Latter energy harvesting structure consists basically of a turbine combined with a generator and low-power electronics to adjust the achieved voltage to a required battery charger voltage. Every component is examined separately hence an optimum can be de ned for all, and subsequently also an overall optimum. Di erent design parameters as e.g. number of blades, solidity ratio and cross-section area are compared for di erent turbines, in order to see what is the most feasible type. Further, a generator is chosen by studying how ux distributions might be adjusted to low velocities, and how cogging torque can be excluded by adapted designs. Low-power electronics are con gured in order to convert and stabilize heavily varying three-phase voltages to a constant, recti ed voltage which is usable for battery storage. Clearly, di erent component parameters as maximum power and torque are matched here to increase the overall power generation. Furthermore an overall maximum power is set up for achieving a maximum power ow at load side. Due to among others typical low velocities of about 0.1 to 0.5 m/s, and constructing limits of the prototype, the vast range of components is restricted to only a few that could be used. Hence, a helical turbine is combined in a direct drive mode to a coreless-stator axial- ux permanent-magnet generator, from which the output voltage is adjusted subsequently by a recti er, impedance matching unit, upconverter circuit and an overall control unit to regulate di erent component parameters. All these electronics are combined in a closed-loop design to involve positive feedback signals. Furthermore a theoretical con guration for the TURTLE vehicle is described in this work and a solution is proposed that might be implemented, for which several design tests are performable in a future study.

Design of a power output stage for a class D audio power amplifier based on an 1.5-bit ∑ ∆ M

Dissertação apresentada para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Molecular characterization of Torque teno virus and SEN virus co-infection with HIV in patients from Southern Iran

Introduction Torque teno virus (TTV) and SEN virus are circular single-stranded DNA viruses that cause blood-borne infections. The SEN virus (SEN-V) was originally detected in the serum of an injection drug user infected with human immunodeficiency virus (HIV). Recently TTV was discovered as a potential causative agent of non-A-E hepatitis. The aim of this study was to investigate the prevalence of the SEN-V-D/H and TTV in HIV patients and healthy blood donors in Iran. Methods One hundred and fifty HIV patients with a mean age of 50.46 ± 18.46 years and 150 healthy blood donors with a mean age of 48.16 ± 13.73 years were included in this study. TTV and SEN-V were detected by the PCR and were quantitatively assayed by competitive PCR (nested and semi-nested PCR). Restriction fragment length polymorphisms (RFLPs) were used to determine the heterogeneity of TTV. Results TTV and SEN-V were detected 96 (64%) and 84 (56%) of 150 HIV patients respectively. These rates were 34% (n=51) and 37.33% (n=56) in healthy blood donors (significant, p<0.05). PCR detected SEN-V/TTV DNA from 32 of the healthy blood donors (21.33%), while 65 (43.33%) of HIV patients were positive for SEN-V/TTV DNA. Of 150 HIV patients, 32.66% and 23.33% were positive for SEN-V-H and SEN-V-D, respectively and 18.66% (n=28) were co-infected with SEN-V-D/H. Conclusions The prevalence of SEN-VD/H and TTV is higher in HIV patients than in healthy blood donors in Southern Iran. Our results suggest that TTV and SEN-V might play a role in the development of liver disease in patients with immunodeficiency diseases.

Real convergence in per capita output and growth in Eurozone: A time-series approach

The real convergence hypothesis has spurred a myriad of empirical tests and approaches in the economic literature. This Work Project intends to test for real output and growth convergence in all N(N-1)/2 possible pairs of output and output growth gaps of 14 Eurozone countries. This paper follows a time-series approach, as it tests for the presence of unit roots and persistence changes in the above mentioned pairs of output gaps, as well as for the existence of growth convergence with autoregressive models. Overall, significantly greater evidence has been found to support growth convergence rather than output convergence in our sample.

Analysis of output properties of the Peroxiredoxin/Thioredoxin/Thioredoxin reductase system

Dissertação de mestrado em Bioinformática

O Modelo unput-output no planeamento de longo prazo

Doutoramento em Economia.

Composition of Greenhouse Gas Emissions in Spain: an Input-Output Analysis

Extending the traditional input-output model to account for the environmental impacts of production processes reveals the channels by which environmental burdens are transmitted throughout the economy. In particular, the environmental input-output approach is a useful technique for quantifying the changes in the levels of greenhouse emissions caused by changes in the final demand for production activities. The inputoutput model can also be used to determine the changes in the relative composition of greenhouse gas emissions due to exogenous inflows. In this paper we describe a method for evaluating how the exogenous changes in sectorial demand, such as changes in private consumption, public consumption, investment and exports, affect the relative contribution of the six major greenhouse gases regulated by the Kyoto Protocol to total greenhouse emissions. The empirical application is for Spain, and the economic and environmental data are for the year 2000. Our results show that there are significant differences in the effects of different sectors on the composition of greenhouse emissions. Therefore, the final impact on the relative contribution of pollutants will basically depend on the activity that receives the exogenous shock in final demand, because there are considerable differences in the way, and the extent to which, individual activities affect the relative composition of greenhouse gas emissions. Keywords: Greenhouse emissions, composition of emissions, sectorial demand, exogenous shock.

Ecological and Economic Impacts within the Environmental Input-Output Framework

The environmental input-output approach reveals the channels through which the environmental burdens of production activities are transmitted throughout the economy. This paper uses the input-output framework and analyses the changes in Spanish emission multipliers during the period 1995-2000. By decomposing the global changes in multipliers into different components, it is possible to evaluate separately the economic and ecological impacts captured by the environmental input-output model. Specifically, in this study we distinguish between the effects on multipliers caused by changes in emission coefficients (the ecological impacts) and the effects on multipliers caused by changes in technical coefficients (the economic impacts). Our results show a significant improvement in the ecological impacts of production activities, which contributed negatively to changes in emission multipliers. They also show a deterioration in the economic impacts, which contributed positively to changes in emission multipliers. Together, these two effects lead to a small reduction in global multipliers during the period of analysis. Our results also show significant differences in the individual behaviour of different sectors in terms of their contribution to multiplier changes. Since there are considerable differences in the way individual sectors affect the changes in emission levels, and in the intensity of these effects, this means that the final effects will basically depend on the activity considered. Keywords: emission multipliers, multipliers' changes, ecological impacts, economic impacts.

An input-output analysis of the "key" sectors in CO2 emissions from a production perspective: an application to the spanish economy

Here we present an approach that allows the identification of the "key" productive sectors responsible for CO2 emission. For this purpose, we develop an input–output methodology from a supply perspective. We focus on the impact of an increase in the value-added of the different productive sectors on total CO2 emissions and we identify the productive sectors responsible for the increase in CO2 emissions when there is an increase in the income of the economy. The approach shows the contribution of the various sectors to CO2 emission from a production perspective and allows us to identify the sectors that deserve more consideration for mitigation policies. This analysis is complementary to the input–output analysis from a demand perspective. The methodology is applied to the Spanish economy.

Economic impacts of alternative water policy scenarios in the Spanish production system: an input-output analysis

The objective of this paper is to analyse the economic impacts of alternative water policies implemented in the Spanish production system. The methodology uses two versions of the input-output price model: a competitive formulation and a mark-up formulation. The input-output framework evaluates the impact of water policy measures on production prices, consumption prices, intermediate water demand and private welfare. Our results show that a tax on the water used by sectors considerably reduces the intermediate water demand, and increases the production and consumption prices. On the other hand, according to Jevons' paradox, an improvement in technical efficiency, which leads to a reduction in the water requirements of all sectors and an increase in water production, increases the amount of water consumed. The combination of a tax on water and improved technical efficiency takes the pressure off prices and significantly reduces intermediate water demand. JEL Classification: C67 ; D57 ; Q25. Keywords: Production prices; Consumption prices; Water uses; Water policy; Water taxation.

Income growth and atmospheric pollution in Spain: an input-output approach

The relationships between economic growth and environmental pressures are complex. Since the early nineties, the debate on these relationships has been strongly influenced by the Environmental Kuznets Curve hypothesis, which states that during the first stage of economic development environmental pressures increase as per capita income increases, but once a critical turning-point has been reached these pressures diminish as income levels continue to increase. However, to date such a delinking between economic growth and emission levels has not happened for most atmospheric pollutants in Spain. The aim of this paper is to analyse the relationship between income growth and nine atmospheric pollutants in Spain. In order to obtain empirical outcomes for this analysis, we adopt an input-output approach and use NAMEA data for the nine pollutants. First, we undertake a structural decomposition analysis for the period 1995-2000 to estimate the contribution of various factors to changes in the levels of atmospheric emissions. And second, we estimate the emissions associated with the consumption patterns of different groups of households classified according to their level of expenditure

Subsistemas input-output y contaminación: una aplicación al sector servicions y las emisiones de CO2 en España

El análisis de subsistemas input-output nos proporciona una herramienta de gran utilidad para estudiar la estructura productiva de los diferentes sectores que componen una economía. En el presente trabajo se ha desarrollado este análisis para estudiar las emisiones de CO2 relacionadas con el conjunto de ramas productivas que conforman el sector servicios. La descomposición de la producción total del subsistema servicios nos permite obtener las emisiones de CO2 relacionadas con diferentes efectos (escala, propio, feed-back y spill over). De los resultados obtenidos, destaca el diferente papel de las distintas ramas productivas de servicios. Las actividades de transporte serían las responsables de las mayores emisiones generadas directamente en el sector. Estas actividades son demandadas por el resto de sectores de la economía en mayor grado que su propia demanda final, teniendo mayor responsabilidad la producción vendida a otros sectores que la propia demanda final. No obstante, para el resto de actividades las emisiones directas e indirectas asociadas a la demanda final son mucho más importantes, por el fuerte efecto de arrastre sobre otras ramas de la economía que ejercen las actividades de servicios. A este respecto, destacan los servicios de Comercio, Hostelería, Inmobiliarias y servicios empresariales y la Administración pública, actividades que reciben escasa atención en el diseño de políticas orientadas a reducir las emisiones, pero que tienen una responsabilidad muy destacable en el fuerte aumento de emisiones experimentado en los últimos años.

Actividad económica, consumo final de energía y requerimientos de energía primaria en Cataluña, 1990-2005. Análisis mediante el uso de los balances energéticos desde una perspectiva input-output

Este trabajo analiza la evolución de los consumos finales de energía en Cataluña durante el periodo 1990-2005. En conjunto, los consumos finales de energía crecen por encima del crecimiento del PIB en términos reales. La disponibilidad actual de datos permite una desagregación en cinco actividades: sector primario; sector industrial; sector servicios; transporte; y sector doméstico. Los aumentos relativos más importantes se dan en los sectores servicios, doméstico y transporte. Es esta última actividad (que incluye el transporte privado y comercial) la que experimenta un mayor aumento en términos absolutos, hasta llegar a representar un consumo final de energía.