Nanocrack-induced leakage current in AlInN/AlN/GaN

Here we report on the study of nano-crack formation in Al1−xInxN/AlN/GaN heterostructures, on its association with composition fluctuation and on its local electrical properties. It is shown here that indium segregation at nano-cracks and threading dislocations originating from the non-pseudomorphic AlN interlayer could be the cause of the high reverse-bias gate leakage current of Ni/Au Schottky contacts on Al1−xInxN/AlN/GaN heterostructures and significantly affects the contact rectifying behavior. Segregation of indium around crack tips in Al1−xInxN acting as conductive paths was assessed with conductive atomic force microscopy.

Le Corbusier y el proyecto para Saint Marie de la Tourette: De la celda al espacio inefable

El convento de la Tourette se concibe en un marco temporal concreto. Sin embargo sería erróneo limitarse a él a la hora de intentar desentrañar las claves del proyecto y llegar a un entendimiento completo del mismo. Es necesario analizarlo atendiendo al conjunto global de la producción del arquitecto, la cual ha ido forjando una forma propia de hacer que condicionará en gran medida las decisiones tomadas en cada momento. Esta tesis realiza una investigación de doble sentido (recogida en los dos volúmenes que la componen). Por un lado analiza el proceso evolutivo en el que se enhebra la obra intentando desentrañar la influencia de aquel en ésta, pero por otro, invirtiendo el sentido, también desvela ciertas claves de la arquitectura de Le Corbusier a través del preciso análisis de proyecto de la Tourette. Pero aún más, la pertenencia del convento de la Tourette al “tipo monacal” introduce la presencia de un tiempo histórico “ab origine, in hillo tempore” del que la investigación se hace eco. Un tiempo al que Le Corbusier siempre volverá la mirada, y que en este caso se encuentra muy presente, determinando el devenir del proyecto de una forma particular y definitiva. Por tanto este trabajo pretende convocar los dos tiempos que conviven en el proyecto del convento de la Tourette, el corto, concreto y cerrado de su génesis y desarrollo, que se circunscribe al periodo de proyecto comprendido entre los años 1953 y 1956, y el más dilatado, abstracto y abierto, que enlaza el proyecto con la producción de Le Corbusier, y aún más atrás, con el tiempo histórico. En la primera parte del trabajo (A. “PROYECTO”) se realiza un análisis cronológico de la documentación gráfica ‐incluyendo su re‐dibujo‐ y escrita del proyecto, desde los croquis que el arquitecto esboza en su primera visita al valle del Turdine hasta el documento final del project d’exécution, a partir del cual se materializará la obra. El objetivo de la investigación no es describir la realidad construida, sino participar del secreto de su génesis analizando y intentando comprender los dibujos o el pensamiento de sus creadores. Frente a la multitud de escritos sobre la obra del convento de la Tourette el foco de atención de la tesis se centra en el proyecto. Es en esta fase de elaboración y desarrollo de las ideas, previa a la acción de construir, donde pensamos que La deriva de la propia actividad del arquitecto avala esta decisión. A lo largo de su carrera Le Corbusier va reduciendo progresivamente su presencia en la obra centrándose cada vez más en las fases de la concepción y proyecto arquitectónico. Considera que en ellas se produce lo “esencial” mientras que deja las decisiones de obra en manos de sus colaboradores y de los diversos “operadores”, participando tan solo en el visto bueno final de las mismas (esta posición contrasta con la entrega de los constructores para quienes el arquitecto encarna la innovación tecnológica). En la Tourette realiza exclusivamente tres visitas de obra en las que actúa como un mero escenógrafo, ajustando aquí y allá pequeñas decisiones de la construcción. Esta distancia refuerza su posición en el proceso y subraya su búsqueda de un ideal teórico desarrollado sobre todo en la fase de proyecto frente a lo subsidiario de la realidad práctica. En la segunda parte de la tesis, denominada “RE‐VISIONES”, se abre el campo de acción a otras facetas de la ingente actividad de Le Corbusier como la pintura, la escritura o incluso la escultura; una nueva MIRADA bajo el prisma de una serie de conceptos‐llave recurrentes en su Petit vocabulaire (l’homme, la céllule, la bôite, l’organisme). Se amplía, por tanto, el marco temporal, repasando de modo genérico y transversal la evolución de los mismos en la trayectoria del arquitecto, comprobándose como el convento de la Tourette es un eslabón característico y clave en todos ellos. ABSTRACT The Convent of La Tourette is conceived in a specific time frame. However, it would be erroneous to limit oneself simply to this when trying to unravel the keys to the project and to fully understand it. It is necessary to analyse the project attending to the entire production of the architect, who progressively shaped his own way of doing things which would condition to a large extent the decisions taken at each point in time. This thesis carries out its research in a dual sense (brought together in both its volumes). On the one hand, it analyses the development process threading the work attempting to fathom the influence of the former on the latter but, on the other hand, inverting the sense which also reveals certain keys to the architecture of Le Corbusier by means of a detailed analysis of the project for La Tourette. Even more so, the Convent of La Tourette belonging to the “monastic type” introduces the presence of a historical period “ab origine, in hillo tempore" reflected in the research. A period to which Le Corbusier would always look back on and which is extremely present in this case, determining the evolution of the project in a particular and definitive manner. Therefore, this piece of work attempts to bring together both time periods co‐existing in the project for the Convent of La Tourette, the short, specific and closed one regarding its genesis development, encompassing the project period going from 1953 to 1956, and the broader, more abstract and open one linking the project with the production by Le Corbusier, and even further back, with the historical period. The first part of this work (A. “PROJECT") performs a chronological analysis of the graphic – including its re‐drawing –and written documentation of the project, from the outlines the architect sketched in his first visit to the Turdine valley up to the final document of the project d’exécution from which the works would materialise. The main object of the investigation is not intend to describe the reality constructed, but to participate in the secret of its genesis, analysing and trying to understand the drawings or the thoughts of its creators. As opposed to the many writings on the work of the Convent of La Tourette, the attention of this thesis focusses on the project. It is in this preparation and development stage, previous to the construction action, where it is believed the real keys to understand and explain it lie. The enormous work collecting, ordering and analysing the abundant graphic and written information reveals “a multidirectional process, full of regrets and securities, errors and certainties, leaps backwards and tremendous foresight in the process” directed not only by the conditions of the assignment, but also by the way of doing things of Le Corbusier and his collaborator I. Xenakis. A web of hidden relationships is weaved in this open space of the process, often distant in time, allowing us to draw a new route, not only towards the constructed works of the Convent of La Tourette, but towards understanding his entire production. It is in the creation of this new path of knowledge, and not only in its conclusion, where the “thesis” acquires its true meaning. In second place, the drift in the actual activity of the architect backs this decision. Throughout his career, Le Corbusier progressively reduced his presence on site, focussing more and more on the conception and architectural project stages. He considered that which was “essential” took place in these, while leaving the on‐site decisions to his collaborators and the different “operators”, only participating in their final approval (this position is in contrast with the delivery by the constructors for whom the architect embodies the technological innovation). In La Tourette he exclusively made three on‐site visits, in which acted as a pure stage designer, adjusting small construction decisions here and there. This distance reinforces his position in the process and underlines his search for a theoretical ideal developed primarily in the project stage as opposed to that which is secondary of the practical reality. The second part of the thesis, called “RE‐VISIONS”, widens the scope of action to other aspects of the huge activity by Le Corbusier, encompassing painting, writing or even sculpture; a new VIEW under the prism of a series of recurrent key concepts in his Petit vocabulaire (l’homme, la céllule, la bôite, l’organisme). The time frame is therefore extended, revising in a generic and transversal manner the development of these concepts throughout the career of Le Corbusier, confirming how the Convent of La Tourette is a characteristic and key link to each of them.

Systematic analysis of the decoding delay in multiview video

We present a framework for the analysis of the decoding delay in multiview video coding (MVC). We show that in real-time applications, an accurate estimation of the decoding delay is essential to achieve a minimum communication latency. As opposed to single-view codecs, the complexity of the multiview prediction structure and the parallel decoding of several views requires a systematic analysis of this decoding delay, which we solve using graph theory and a model of the decoder hardware architecture. Our framework assumes a decoder implementation in general purpose multi-core processors with multi-threading capabilities. For this hardware model, we show that frame processing times depend on the computational load of the decoder and we provide an iterative algorithm to compute jointly frame processing times and decoding delay. Finally, we show that decoding delay analysis can be applied to design decoders with the objective of minimizing the communication latency of the MVC system.

Quadruple-junction inverted metamorphic concentrator devices

We present results for quadruple-junction inverted metamorphic (4J-IMM) devices under the concentrated direct spectrum and analyze the present limitations to performance. The devices integrate lattice-matched subcells with rear heterojunctions, as well as lattice-mismatched subcells with low threading dislocation density. To interconnect the subcells, thermally stable lattice-matched tunnel junctions are used, as well as a metamorphic GaAsSb/GaInAs tunnel junction between the lattice-mismatched subcells. A broadband antireflection coating is used, as well as a front metal grid designed for high concentration operation. The best device has a peak efficiency of (43.8 ± 2.2)% at 327-sun concentration, as measured with a spectrally adjustable flash simulator, and maintains an efficiency of (42.9 ± 2.1)% at 869 suns, which is the highest concentration measured. The V_oc increases from 3.445 V at 1-sun to 4.10 V at 327-sun concentration, which indicates high material quality in all of the subcells. The subcell voltages are analyzed using optical modeling, and the present device limitations and pathways to improvement are discussed. Although further improvements are possible, the 4J-IMM structure is clearly capable of very high efficiency at concentration, despite the complications arising from utilizing lattice-mismatched subcells.

Energy-based de novo protein folding by conformational space annealing and an off-lattice united-residue force field: Application to the 10-55 fragment of staphylococcal protein A and to apo calbindin D9K

The conformational space annealing (CSA) method for global optimization has been applied to the 10-55 fragment of the B-domain of staphylococcal protein A (protein A) and to a 75-residue protein, apo calbindin D9K (PDB ID code 1CLB), by using the UNRES off-lattice united-residue force field. Although the potential was not calibrated with these two proteins, the native-like structures were found among the low-energy conformations, without the use of threading or secondary-structure predictions. This is because the CSA method can find many distinct families of low-energy conformations. Starting from random conformations, the CSA method found that there are two families of low-energy conformations for each of the two proteins, the native-like fold and its mirror image. The CSA method converged to the same low-energy folds in all cases studied, as opposed to other optimization methods. It appears that the CSA method with the UNRES force field, which is based on the thermodynamic hypothesis, can be used in prediction of protein structures in real time.

An iterative method for extracting energy-like quantities from protein structures.

We present a method (ENERGI) for extracting energy-like quantities from a data base of protein structures. In this paper, we use the method to generate pairwise additive amino acid "energy" scores. These scores are obtained by iteration until they correctly discriminate a set of known protein folds from decoy conformations. The method succeeds in lattice model tests and in the gapless threading problem as defined by Maiorov and Crippen [Maiorov, V. N. & Crippen, G. M. (1992) J. Mol. Biol. 227, 876-888]. A more challenging test of threading a larger set of test proteins derived from the representative set of Hobohm and Sander [Hobohm, U. & Sander, C. (1994) Protein Sci. 3, 522-524] is used as a "workbench" for exploring how the ENERGI scores depend on their parameter sets.

Calix[6]arene Derivatives as Pivotal Components of Working Devices and Molecular Machine Prototypes

This Ph.D. thesis describes the synthesis, characterization and study of calix[6]arene derivatives as pivotal components for the construction of molecular machine prototypes. Initially, the ability of a calix[6]arene wheel to supramolecularly assist and increase the rate of a nucleophilic substitution reaction was exploited for the synthesis of two constitutionally isomeric oriented rotaxanes. Then, the synthesis and characterization of several hetero-functionalised calix[6]arene derivatives and the possibility to obtain molecular muscle prototypes was reported. The ability of calix[6]arenes to form oriented pseudorotaxane towards dialkyl viologen axles was then exploited for the synthesis of two calixarene-based [2]catenanes. As last part of this thesis, studies on the electrochemical response of the threading-dethreading process of calix[6]arene-based pseudorotaxanes and rotaxanes supported on glassy carbon electrodes are reported.

High-speed UDP Data Transmission with Multithreading and Automatic Resource Allocation

In this paper a utilization of the high data-rates channels by threading of sending and receiving is studied. As a communication technology evolves the higher speeds are used more and more in various applications. But generating traffic with Gbps data-rates also brings some complications. Especially if UDP protocol is used and it is necessary to avoid packet fragmentation, for example for high-speed reliable transport protocols based on UDP. For such situation the Ethernet network packet size has to correspond to standard 1500 bytes MTU[1], which is widely used in the Internet. System may not has enough capacity to send messages with necessary rate in a single-threaded mode. A possible solution is to use more threads. It can be efficient on widespread multicore systems. Also the fact that in real network non-constant data flow can be expected brings another object of study –- an automatic adaptation to the traffic which is changing during runtime. Cases investigated in this paper include adjusting number of threads to a given speed and keeping speed on a given rate when CPU gets heavily loaded by other processes while sending data.

Mapping hippocampal and ventricular change in Alzheimer disease

We developed an anatomical mapping technique to detect hippocampal and ventricular changes in Alzheimer disease (AD). The resulting maps are sensitive to longitudinal changes in brain structure as the disease progresses. An anatomical surface modeling approach was combined with surface-based statistics to visualize the region and rate of atrophy in serial MRI scans and isolate where these changes link with cognitive decline. Fifty-two high-resolution MRI scans were acquired from 12 AD patients (age: 68.4 +/- 1.9 years) and 14 matched controls (age: 71.4 +/- 0.9 years), each scanned twice (2.1 +/- 0.4 years apart). 3D parametric mesh models of the hippocampus and temporal horns were created in sequential scans and averaged across subjects to identify systematic patterns of atrophy. As an index of radial atrophy, 3D distance fields were generated relating each anatomical surface point to a medial curve threading down the medial axis of each structure. Hippocampal atrophic rates and ventricular expansion were assessed statistically using surface-based permutation testing and were faster in AD than in controls. Using color-coded maps and video sequences, these changes were visualized as they progressed anatomically over time. Additional maps localized regions where atrophic changes linked with cognitive decline. Temporal horn expansion maps were more sensitive to AD progression than maps of hippocampal atrophy, but both maps correlated with clinical deterioration. These quantitative, dynamic visualizations of hippocampal atrophy and ventricular expansion rates in aging and AD may provide a promising measure to track AD progression in drug trials. (C) 2004 Elsevier Inc. All rights reserved.

Structure of thermolysin cleaved microcin J25: Extreme stability of a two-chain antimicrobial peptide devoid of covalent links

sThe structure of a two-chain peptide formed by the treatment of the potent antimicrobial peptide microcin J25 (MccJ25) with thermolysin has been characterized by NMR spectroscopy and mass spectrometry. The native peptide is 21 amino acids in size and has the remarkable structural feature of a ring formed by linkage of the side chain of Glu8 to the N-terminus that is threaded by the C-terminal tail of the peptide. Thermolysin cleaves the peptide at the Phe10-Val11 amide bond, but the threading of the C-terminus through the N-terminal ring is so tight that the resultant two chains remain associated both in the solution and in the gas phases. The three-dimensional structure of the thermolysin-cleaved peptide derived using NMR spectroscopy and simulated annealing calculations has a well-defined core that comprises the N-terminal ring and the threading C-terminal tail. In contrast to the well-defined core, the newly formed termini at residues Phe10 and Val11 are disordered in solution. The C-terminal tail is associated to the ring both by hydrogen bonds stabilizing a short beta-sheet and by hydrophobic interactions. Moreover, unthreading of the tail through the ring is prevented by the bulky side chains of Phe19 and Tyr20, which flank the octapeptide ring. This noncovalent two-peptide complex that has a remarkable stability in solution and in highly denaturing conditions and that survives in the gas phase is the first example of such a two-chain peptide lacking disulfide or interchain covalent bonds.

A real-time asymmetric multiprocessor-reconfigurable system-on-chip architecture

We propose an asymmetric multi-processor SoC architecture, featuring a master CPU running uClinux, and multiple loosely-coupled slave CPUs running real-time threads assigned by the master CPU. Real-time SoC architectures often demand a compromise between a generic platform for different applications, and application-specific customizations to achieve performance requirements. Our proposed architecture offers a generic platform running a conventional embedded operating system providing a traditional software-oriented development approach, while multiple slave CPUs act as a dedicated independent real-time threads execution unit running in parallel of master CPU to achieve performance requirements. In this paper, the architecture is described, including the application / threading development environment. The performance of the architecture with several standard benchmark routines is also analysed.

Modelling Java concurrency with Object-Z

In this paper, we present a formal model of Java concurrency using the Object-Z specification language. This model captures the Java thread synchronization concepts of locking, blocking, waiting and notification. In the model, we take a viewpoints approach, first capturing the role of the objects and threads, and then taking a system view where we capture the way the objects and threads cooperate and communicate. As a simple illustration of how the model can, in general be applied, we use Object-Z inheritance to integrate the model with the classical producer-consumer system to create a specification directly incorporating the Java concurrency constructs.

A classification of concurrency failures in java components

The Java programming language supports concurrency. Concurrent programs are hard to test due to their inherent non-determinism. This paper presents a classification of concurrency failures that is based on a model of Java concurrency. The model and failure classification is used to justify coverage of synchronization primitives of concurrent components. This is achieved by constructing concurrency flow graphs for each method call. A producer-consumer monitor is used to demonstrate how the approach can be used to measure coverage of concurrency primitives and thereby assist in determining test sequences for deterministic execution.

MOVPE growth and characterization of Al(Ga)N and InAlN/AlGaN quantum wells for UV LED applications

The study of III-nitride materials (InN, GaN and AlN) gained huge research momentum after breakthroughs in the production light emitting diodes (LEDs) and laser diodes (LDs) over the past two decades. Last year, the Nobel Prize in Physics was awarded jointly to Isamu Akasaki, Hiroshi Amano and Shuji Nakamura for inventing a new energy efficient and environmental friendly light source: blue light-emitting diode (LED) from III-nitride semiconductors in the early 1990s. Nowadays, III-nitride materials not only play an increasingly important role in the lighting technology, but also become prospective candidates in other areas, for example, the high frequency (RF) high electron mobility transistor (HEMT) and photovoltaics. These devices require the growth of high quality III-nitride films, which can be prepared using metal organic vapour phase epitaxy (MOVPE). The main aim of my thesis is to study and develop the growth of III-nitride films, including AlN, u-AlGaN, Si-doped AlGaN, and InAlN, serving as sample wafers for fabrication of ultraviolet (UV) LEDs, in order to replace the conventional bulky, expensive and environmentally harmful mercury lamp as new UV light sources. For application to UV LEDs, reducing the threading dislocation density (TDD) in AlN epilayers on sapphire substrates is a key parameter for achieving high-efficiency AlGaNbased UV emitters. In Chapter 4, after careful and systematic optimisation， a working set of conditions, the screw and edge type dislocation density in the AlN were reduced to around 2.2×108 cm-2 and 1.3×109 cm-2 , respectively, using an optimized three-step process, as estimated by TEM. An atomically smooth surface with an RMS roughness of around 0.3 nm achieved over 5×5 µm 2 AFM scale. Furthermore, the motion of the steps in a one dimension model has been proposed to describe surface morphology evolution, especially the step bunching feature found under non-optimal conditions. In Chapter 5, control of alloy composition and the maintenance of compositional uniformity across a growing epilayer surface were demonstrated for the development of u-AlGaN epilayers. Optimized conditions (i.e. a high growth temperature of 1245 °C) produced uniform and smooth film with a low RMS roughness of around 2 nm achieved in 20×20 µm 2 AFM scan. The dopant that is most commonly used to obtain n-type conductivity in AlxGa1-xN is Si. However, the incorporation of Si has been found to increase the strain relaxation and promote unintentional incorporation of other impurities (O and C) during Si-doped AlGaN growth. In Chapter 6, reducing edge-type TDs is observed to be an effective appoach to improve the electric and optical properties of Si-doped AlGaN epilayers. In addition, the maximum electron concentration of 1.3×1019 cm-3 and 6.4×1018 cm-3 were achieved in Si-doped Al0.48Ga0.52N and Al0.6Ga0.4N epilayers as measured using Hall effect. Finally, in Chapter 7, studies on the growth of InAlN/AlGaN multiple quantum well (MQW) structures were performed, and exposing InAlN QW to a higher temperature during the ramp to the growth temperature of AlGaN barrier (around 1100 °C) will suffer a significant indium (In) desorption. To overcome this issue, quasi-two-tempeature (Q2T) technique was applied to protect InAlN QW. After optimization, an intense UV emission from MQWs has been observed in the UV spectral range from 320 to 350 nm measured by room temperature photoluminescence.

(Un)covering ground: dance, space and mobility

Ballet and modern dance teachers often exhort students to ‘travel across the floor’ and ‘cover ground’. These instructions invoke metaphors of travel and mobility that capture an array of common assumptions about dance, space and movement. This essay examines the spatial and mobility discourses that these instructions simultaneously build upon and produce while exploring the seductiveness of technique’s promise of mastering space through the moving body. Threading auto-ethnography with critical theory and moving across different disciplinary fields and writing styles, I explore the ways in which these instructions leak outside the perimeter of the dance studio to feed into the narrative of a dancer’s extended physical, geographical and social mobility. Analysing the mobility and travel discourses of my dance training vis-à-vis poststructuralist theorizations of the subaltern power of the nomad and theories of space and place, I argue that this narrative becomes complicit in the construction of an idealized notion of artistic nomadism, which, in turn, aligns with current neoliberal logics organised around the production of mobile subjects.