Cattle Teeth in Graves : Interpretations of animal bones found in Finnish inhumation graves (ca AD 550-1700)

The nature of a burial is always ritualistic. This is often forgotten when dealing with Finnish inhumation burials containing animal bones. Only the animal bones found close to the deceased have traditionally been thought to have a ritualistic purpose. The animal bones found in the filling of the grave, which is still part of the burial, has on the other hand, often been neglected in the previous research. In this Master s thesis I will discuss the function and interpretation of animal bones in graves. The base of this study is six sites, all of different nature, from Finland. Luistari in Eura is from the western coast and is dated to Late Iron Age (and possibly Medieval period), the Medieval hamlet of Finno is situated in Espoo which is situated on the southern coast. Two town burials, Turku and Porvoo, are also included in this study. The graves from Turku are dated to Late Medieval period and Early Renaissance, whereas the cemetery in Porvoo is from the 18th century. Visulahti in Mikkeli is from the Late Iron Age and represents Eastern Finnish burial tradition, the same as Suotniemi from Käkisalmi parish, which is nowadays part of Russia. While parts of the animal bones had already been analysed before, the author also analysed animal bones for the purpose of the present Master´s thesis. The bones were compared to the burial contexts, when possible. Based on the comparisons I have made interpretations which might explain the existence of animal bones in the graves. The interpretations are among others sacrifice, commemoration meals and animal burials. The site could also have been a settlement site prior to the graves, thus the bones in the graves would belong to the settlement phase. When comparing the date of the studied sites, the town burials are later and the animal bones are probably related to previous or contemporary use of the sites as graveyards. On top of this there does not seem to be much difference in burial tradition between Eastern and Western Finland, although at least from the hamlet burials of Finno there are aspects that could be linked to Eastern burials. In making the interpretations I have taken into consideration the aspects of belief during different time periods when they could be accounted as relevant. Also the problems with bone preservation were relevant and challenging for the study. Often only the hardest substance of the skeleton, namely teeth, has been preserved. For this reason the quality of the archaeological documentation was a key issue in this study. In producing quality interpretations of the animal bones in graves, the bones, contexts and their relationship to the surrounding site should be documented with care.

BIOMASS GASIFICATION TO SUBSTITUTE FOSSIL FUEL IN FOOD INDUSTRY

Food industries like biscuit and confectionary use significant amount of fossil fuel for thermal energy. Biscuit manufacturing in India is carried out both by organized and unorganized sector. The ratio of organized to unorganized sector is 60 : 40 (1). The total biscuit manufacturing in the organized sector India in 2008 was about 1.7 million metric tons (1). Accounting for the unorganized sector in India, the total biscuit manufacturing would have been about 2.9 million metric tons/annum. A typical biscuit baking is carried in a long tunnel kiln with varying temperature in different zones. Generally diesel is used to provide the necessary heat energy for the baking purpose, with temperature ranging from 190 C in the drying zone to about 300 C in the baking area and has to maintain in the temperature range of +/- 5 C. Typical oil consumption is about 40 litres per ton of biscuit production. The paper discusses the experience in substituting about 120 lts per hour kiln for manufacturing about 70 tons of biscuit daily. The system configuration consists of a 500 kg/hr gasification system comprising of a reactor, multicyclone, water scrubbers, and two blowers for maintaining the constant gas pressure in the header before the burners. Cold producer gas is piped to the oven located about 200 meters away from the gasifier. Fuel used in the gasification system is coconut shells. All the control system existing on the diesel burner has been suitably adapted for producer gas operation to maintain the total flow, A/F control so as to maintain the temperature. A total of 7 burners are used in different zones. Over 17000 hour of operation has resulted in replacing over 1800 tons of diesel over the last 30 months. The system operates for over 6 days a week with average operational hours of 160. It has been found that on an average 3.5 kg of biomass has replaced one liter of diesel.

Anisotropic, gradient and metal-like mechanical behaviors of teeth and their implications on tooth functions

The anisotropy and gradient of the elastic modulus and the hardness of teeth were investigated by means of instrumented indentation method. Such properties are attributed to the unique microstructures of teeth based on scanning electron microscopic analysis. By comparing the relationship between the ratio of hardness to the reduced elastic modulus and the ratio of elastic unloading work to the total work of teeth in course of indentation to those of other materials, we found that the material behaviors of teeth display metal-like characteristics rather than ceramics as considered traditionally. These material behaviors and relevant functions are discussed briefly.

The Fossil higher plants from the Canal Zone

Fossil flora described in the present report is too limited for purposes of exact correlation, which may be expected to be settled by the marine faunas present at most horizons in the Isthmian region. Accompanying table of distribution will show that from the oldest (Hohio) to the youngest (Gatun) plant-bearing formations there is no observable difference in floral facies. This so-called Oligocence series of formations does not represent any great interval of time. (39 page document)

Analysis of growth layers in the teeth of Tursiops truncatus using light microscopy, microradiography, and SEM

Preliminary results show microradiography and scanning electron microscopy (SEM) to be more accurate methods of accessing growth layer groups (GLGs) in the teeth of Tursiops truncatus than transmitted light microscopy. Microradiography shows the rhythmic deposition of mineral as alternating radiopaque and radiolucent layers. It improves the resolution of GLGs near the pulp cavity in older individuals, better than either SEM or light microscopy. SEM of etched sections show GLGs as ridges and grooves which are easily counted from the micrograph. SEM also shows GLGs to be composed of fine incremental layers of uniform size and number which may allow for more precise age determination. Accessory layers are usually hypomineralized layers within the hypermineralized layer of the GLG and are more readily distinguishable as such in SEM of etched sections and microradiographs than in thin sections viewed under transmitted light. The neonatal line is hypomineralized, appearing translucent under transmitted light, radiolucent in a microradiograph, and as a ridge in SEM. (PDF contains 6 pages.)

Age determination and age related factors in the teeth of Western North Atlantic bottlenose dolphins.

Teeth were taken from 120 bottlenose dolphins, Tursiops truncatus, which had stranded on the mid-Atlantic coast of the United States. The number of annual growth layer groups (GLGs) for each animal was used to construct a growth curve. The growth rate of coastal North Atlantic Ocean Tursiops is similar to other cetaceans in having a high initial rate of growth, with no differences in growth between females and males. In females, the first dentinal GLG is thickest and is followed by GLGs which become progressively narrower. In males, the second GLG is thicker than the first; GLGs beyond number two become progressively smaller but at a slower rate than in females. In males and females, the translucent layer makes up proportionally larger parts of the GLG as the animal ages, but in males the percent translucent layer remains constant at about 50% while in females it continues to increase up to about 70% of the GLG. These two factors, GLGs width and translucent layer width, indicate that the sex and age of the animal influence the deposition of GLGs. Incremental layers are also present, averaging 12 per GLG, and seem similar to incremental layers described in other marine mammals. A plot of the relationship of percent growth of the last GLG to time of death suggests that the deposition of GLGs is relatively constant, at least during the first half of the year, and that North Atlantic Ocean Tursiops give birth in the fall as well as in the spring. (PDF contains 31 pages.)

Estimating age of spotted and spinner dolphins (Stenella attenuata and Stenella longirostris) from teeth

This paper is an account of preparation and examination techniques and criteria used to estimate age in decalcified and stained tooth thin sections from spinner and spotted dolphins. A dentinal growth layer group (GLG), composed of two thin light and two thicker dark-stained layers, is deposited annually. The GLG component layers are variably visible, but the "ideal" pattern and successive thinning of dentinal GLGs are used as a guide to determine GLG limits. Age-specific thicknesses of dentinal GLGs found in Hawaiian spinner dolphin teeth seem to be applicable to teeth of spotted dolphins and can be used as an aid in locating GLG boundaries. Cementa1 GLGs are composed of a dark-stained and alightly stained layer and usually are deposited at a rate of one per year, but may be deposited every other year or two or three times per year. Two slightly different methods of counting dentinal GLGs are presented, along with guidelines for determining whether dentinal or cementa1 GLG counts provide the best estimate of age for a specimen. (PDF contains 23 pages.)

The First Occurrence in the Fossil Record of an Aquatic Avian Twig-Nest with Phoenicopteriformes Eggs: Evolutionary Implication

14 p.

From fossil molluscs to salmon

On 9 April 1897 Wilfrid Hudleston, an eminent geologist, purchased the West Holme Estate, comprising some 1500 acres on the edge of the Isle of Purbeck in Dorset, where he could enjoy his sporting interest in shooting and fishing. In doing so, he established a link between himself, The Malacological Society of London, and the Freshwater Biological Association. Hudleston was a keen field geologist who built up a personal collection of several thousand fossils. In 1893 Hudleston took the chair at a meeting, held at the Natural History Museum, which founded The Malacological Society of London. The site on which the Freshwater Biological Association's River Laboratory now stands was formerly part of the West Holme Estate. It purchased the fishing rights to the East Stoke mill stream prior to building the laboratory, in 1957.

The diatoms of Longans lake-vegetation. Fossil diatom flora. [Translation from: Acta Phytogeographica Suecica 36 73-86, 1955. ]

Sediment samples were taken from Lake Langans in Sweden and fossilised diatoms analysed. Sample methods and environmental factors are discussed. Species with a characteristic occurrence are described. The article discusses diatom-thanatocoenoses as indicators of environment.

A paleoictiofauna da Formação Missão Velha, Cretáceo Inferior da Bacia do Araripe, Nordeste do Brasil

A Bacia sedimentar do Araripe é uma das mais ricas localidades fossilíferas do mundo e representa algumas das principais fases da evolução tectônica ligadas ao processo de abertura do Atlântico Sul. Essa bacia se subdivide em dois pacotes estratigráficos distintos: o Grupo Cariri (constituído pelas formações Cariri, Missão Velha e Rio Batateiras) e o Grupo Araripe (constituído pelas formações Crato, Ipubi, Santana e Exu). No caso do Grupo Cariri, apenas a Formação Missão Velha (= Brejo Santo para alguns autores) apresenta restos de peixes fósseis. Essa fauna, típica da fase rift da separação da parte oeste do Gondwana, pode ser comparada à ictiofauna já descrita no Grupo Bahia e à fauna encontrada em diversas bacias interiores do Nordeste do Brasil. O presente trabalho constou da realização de coletas na Formação Missão Velha, identificação, preparação e descrição dos espécimes coletados; comparação da paleoictiofauna dessa formação com a de outras bacias de mesma idade; análise da distribuição paleobiogeográfica dos grupos ali presentes. Apesar de desarticulados, foram identificados seis táxons de peixes, assim como fragmentos de teleósteos não identificados. Os táxons identificados a partir do material coletado são: dentes, espinhos cefálicos e espinhos de nadadeira dorsal de Hybodontiformes; escamas, dentes e ossos desarticulados de Lepidotes sp.; escamas de Pleuropholidae; diversos ossos desarticulados de Mawsonia cf. gigas; placa dentária e outros ossos isolados de Ceratodus sp. Essa fauna é muito importante, pois representa uma biota lacustrina do Neocomiano do Brasil, depositada durante os estágios pré-rift/rift da separação do oeste do Gondwana. Durante a fase pré-rift e rift pode ser observada uma correlação estratigráfica entre a Formação Missão Velha e as bacias marginais da África ocidental. Portanto, a biota presente na Formação Missão Velha auxilia a compreensão da diversidade faunística presente nos estágios pré-rift e rift do Brasil e da África.