Open-pit block sequencing optimization: A mathematical model and solution technique

This study presents a comprehensive mathematical formulation model for a short-term open-pit mine block sequencing problem, which considers nearly all relevant technical aspects in open-pit mining. The proposed model aims to obtain the optimum extraction sequences of the original-size (smallest) blocks over short time intervals and in the presence of real-life constraints, including precedence relationship, machine capacity, grade requirements, processing demands and stockpile management. A hybrid branch-and-bound and simulated annealing algorithm is developed to solve the problem. Computational experiments show that the proposed methodology is a promising way to provide quantitative recommendations for mine planning and scheduling engineers.

Intuitive interaction in a mixed reality system

Tangible physical systems are more intuitive than Intangible virtual Systems. Mixed reality systems are considered as an alternative to virtual systems, bringing advantages of tangible systems into an interaction. However, past research has mainly focussed on technical aspects of incorporating pervasive-ness and immersive-ness in the virtual systems. This paper reports on an empirical study of intuitive Interaction in a Mixed Reality game system for children and the design aspects that could facilitate intuitive Interaction in such systems. A related samples Friedman’s test showed that the Mixed Reality game system demonstrated more intuitive interactions than non-intuitive Interactions. A linear regression analysis further established that the variation in intuitive Interaction in the Mixed Reality system could be statistically significantly explained primarily by physical affordances offered by the Mixed Reality system and to a lesser extent by the perceived affordances in the system. Design guidelines to develop intuitive Mixed Reality systems are discussed. These guidelines should allow designers to exploit the wonders of advances in technology and at the same time allow users to directly interact with the physical real world. This will allow users to access maximal physical affordances, which are primary contributors to intuitive interaction in Tangible and Mixed Reality systems.

Synthesis of nanocrystalline alpha-Al2O3 by ultrasonic flame pyrolysis

Nanocrystalline alpha-alumina was synthesized in an indigenously built ultrasonic flame pyrolysis (UFP) setup. This paper describes the technical aspects of the apparatus and particle formation in the flame. Ultrasonically atomized aluminium nitrate dissolved in methanol-water mixture was pyrolyzed in an oxy-propane flame for yielding nanocrystalline alpha-alumina. The formation of nanophase alumina was confirmed by powder XRD analysis. Scanning electron microscopy (SEM) analysis was carried out to study particulate morphology. (C) 2003 Elsevier Science Ltd. All rights reserved.

Implementação de verificações biométricas processadas em cartões inteligentes a multi-aplicações.

As biometrias vêm sendo utilizadas como solução de controle de acesso a diversos sistemas há anos, mas o simples uso da biometria não pode ser considerado como solução final e perfeita. Muitos riscos existem e não devem ser ignorados. A maioria dos problemas está relacionada ao caminho de transmissão entre o local onde os usuários requerem seus acessos e os servidores onde são guardados os dados biométricos capturados em seu cadastro. Vários tipos de ataques podem ser efetuados por impostores que desejam usar o sistema indevidamente. Além dos aspectos técnicos, existe o aspecto social. É crescente a preocupação do usuário tanto com o armazenamento quanto o uso indevido de suas biometrias, pois é um identificador único e, por ser invariável no tempo, pode ser perdido para sempre caso seja comprometido. O fato de que várias empresas com seus diferentes servidores guardarem as biometrias está causando incomodo aos usuários, pois as torna mais suscetíveis à ataques. Nesta dissertação, o uso de cartões inteligentes é adotado como possível solução para os problemas supracitados. Os cartões inteligentes preparados para multi-aplicações são usados para realizar as comparações biométricas internamente. Dessa forma, não seria mais necessário utilizar diversos servidores, pois as características biométricas estarão sempre em um único cartão em posse do dono. Foram desenvolvidas e implementadas três diferentes algoritmos de identificação biométrica utilizando diferentes características: impressão digital, impressão da palma da mão e íris. Considerando a memória utilizada, tempo médio de execução e acurácia, a biometria da impressão da palma da mão obteve os melhores resultados, alcançando taxas de erro mínimas e tempos de execução inferiores a meio segundo.

地幔压力下CaSiO3 Perovskite状态方程和弹性常数的第一性原理研究

In the past decade density functional theory (DFT) has made its way from a peripheral position in quantum chemistry to center. Of course the often excellent accuracy of the DFT based methods has provided the primary driving force of this development. This dissertation is devoted to the study of physical and chemical properties of planetary materials by first-principle calculation. The concerned properties include the geometry, elastic constants and anisotropy. In the first chapter, we give a systematic introduction to theoretical background and review its progress. Development of quantum chemistry promotes the establishment of DFT. Theorem of Hohenberg-Kohn is the fundament of DFT and is developed to Kohn-Sham equation, which can be used to perform real calculations. Now, new corrections and extensions, together with developed exchange-correlation, have made DFT more accurate and suitable for larger systems. In the second chapter, we focus on the calculational methods and technical aspects of DFT. Although it is important to develop methods and program, external package are still often used. At the end of this chapter, we briefly some widely used simulation package and the application of DFT. In the third chapter, we begin to focus on properties of real materials by first principles calculation. We study a kind of minerals named Ca perovskite, investigate its possible structure and anisotropy at Earth’s mental condition. By understanding and predicting geo-physically important materials properties at extreme conditions, we can get the most accurate information to interpret seismic data in the context of likely geophysical processes.

New instrumentation for micro-imaging X-ray absorption spectroscopy using optical detection methods

Poolton, Nigel; Towlson, B.M.; Hamilton, B.; Evans, D.A., (2006) 'New instrumentation for micro-imaging X-ray absorption spectroscopy using optical detection methods', Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 246(2) pp.445-451 RAE2008

Nanopartículas e suas aplicações em Ciências Farmacêuticas

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Ciências Farmacêuticas

Prostate biopsy in selecting candidates for hemiablative focal therapy.

Focal therapy (FT) for the management of clinically localized prostate cancer (PCa) is growing from a concept to reality because of increased interest of both patients and physicians. Selection protocols, however, are yet to be established. We discuss the role of prostate biopsy in candidate selection for FT and highlight the different strategies and technical aspects of the use of prostate biopsy in this setting. In our opinion, prostate biopsy plays a major role in the selection process and tailoring appropriate treatment strategy to the patient. FT necessitates dedicated biopsy schemes that would reliably predict the extent, nature, and location of PCa in selected patients. Currently, there is insufficient scientific evidence to propose a specific biopsy scheme that could fit every candidate, providing accurate characterization of the disease in the individual patient. Further research is necessary to establish solid selection protocols that would reliably identify appropriate candidates for FT of PCa.

The potential use of mapped extent and distribution of habitats as indicators of Good Environmental Status (GES)

The Healthy and Biologically Diverse Seas Evidence Group (HBDSEG) has been tasked with providing the technical advice for the implementation of the Marine Strategy Framework Directive (MSFD) with respect to descriptors linked to biodiversity. A workshop was held in London to address one of the Research and Development (R&D) proposals entitled: ‘Mapping the extent and distribution of habitats using acoustic and remote techniques, relevant to indicators for area/extent/habitat loss.’ The aim of the workshop was to identify, define and assess the feasibility of potential indicators of benthic habitat distribution and extent, and identify the R&D work which could be required to fully develop these indicators. The main points that came out of the workshop were: (i) There are many technical aspects of marine habitat mapping that still need to be resolved if cost-effective spatial indicators are to be developed. Many of the technical aspects that need addressing surround issues of consistency, confidence and repeatability. These areas should be tackled by the JNCC Habitat Mapping and Classification Working Group and the HBDSEG Seabed Mapping Working Group. (ii) There is a need for benthic ecologists (through the HBDSEG Benthic Habitats Subgroup and the JNCC Marine Indicators Group) to finalise the list of habitats for which extent and/or distribution indicators should be considered for development, building upon the recommendations from this report. When reviewing the list of indicators, benthic habitats could also be distinguished into those habitats that are defined/determined primarily by physical parameters (although including biological assemblages) (e.g. subtidal shallow sand) and those defined primarily by their biological assemblage (e.g. seagrass beds). This distinction is important as some anthropogenic pressures may influence the biological component of the ecosystem despite not having a quantifiable effect on the physical habitat distribution/extent. (iii) The scale and variety of UK benthic habitats makes any attempt to undertake comprehensive direct mapping exercises prohibitively expensive (especially where there is a need for repeat surveys for assessment). There is a clear need therefore to develop a risk-based approach that uses indirect indicators (e.g. modelling), such as habitats at risk from pressures caused by current human activities, to develop priorities for information gathering. The next steps that came out of the workshop were: (i) A combined approach should be developed by the JNCC Marine Indicators Group together with the HBDSEG Benthic Habitats Subgroup, which will compile and ultimately synthesise all the criteria used by the three different groups from the workshop. The agreed combined approach will be used to undertake a final review of the habitats considered during the workshop, and to evaluate any remaining habitats in order to produce a list of habitats for indicator development for which extent and/or distribution indicators could be appropriate. (ii) The points of advice raised at this workshop, alongside the combined approach aforementioned, and the final list of habitats for extent and/or distribution indicator development will be used to develop a prioritised list of actions to inform the next round of R&D proposals for benthic habitat indicator development in 2014. This will be done through technical discussions within JNCC and the relevant HBDSEG Subgroups. The preparation of recommendations by these groups should take into account existing work programmes, and consider the limited resources available to undertake any further R&D work.

Patient satisfaction with realtime teledermatology in Northern Ireland

Teledermatology consultations were organized between two health centers and two hospitals in Northern Ireland using low-cost videoconferencing equipment. A prospective study of patient satisfaction was carried out. Following each teleconsultation, patients were asked to complete a questionnaire assessing their satisfaction with the service. Over 22 months, 334 patients were seen by a dermatologist over the video-link, and 292 patients (87%) completed the 16-item questionnaire. Patients reported universal satisfaction with the technical aspects of teledermatology. The quality of both the audio and the display was highly acceptable to patients. Personal experiences of the teledermatology consultation were also favourable: 85% felt comfortable using the video-link. The benefits of teledermatology were generally recognized: 88% of patients thought that a teleconsultation could save time. Patients found the teledermatology consultation to be as acceptable as the conventional dermatology consultation. These findings suggest overall patient satisfaction with realtime teledermatology.

How standardised patients award global scores in OSCEs: a qualitative study

Standardized patients (SPs) are often asked to award global scores on the humanistic aspects of a candidate’s performance in an OSCE. However, little is known about the process by which SPs arrive at their mark.
Five focus groups of SPs, using a convenience sample, were used to collect data until saturation. Thematic analysis was carried out independently by three researchers using a grounded theory approach.

Four major themes contributed to their decision-making process: environment, relationships within the exam, preparedness for the task and expectations of the student’s performance. Environmental factors included the station itself, the rating scale and examiner fatigue. Relationship factors included first impressions, the sense of purpose derived from examining and a tendency to mirror the examiner’s reaction. Factors relating to preparedness for task involved experience as an SP and technical aspects, such as the need for calibration. Lastly, expectations of performance were related to preconceptions about what makes a ‘good’ student, including their level of studies, appearance and technical performance.

In assessing students, SPs drew on their wider attitudes and experiences. SPs did not limit their assessment to humanistic traits but often included technical performance. Thus, SPs to some extent assessed a similar construct to examiners and this may help to explain the increased reliability associated with using SP scores. SP global scores are a useful adjunct but the process by which SPs award marks is complex and provides a challenge for training and standardisation.

How Critical Care Nurses' Role and Education Affect Organ Donation

Organ and tissue dysfunction and failure cause high mortality rates around the world. Tissue and organs transplantation is an established, cost-effective, life-saving treatment for patients with organ failure. However, there is a large gap between the need for and the supply of donor organs. Acute and critical care nurses have a central role in the organ donation process, from identifying and assessing potential donors and supporting their families to involvement in logistics. Nurses with an in-depth knowledge of donation understand its clinical and technical aspects as well as the moral and legal considerations. Nurses have a major role to play in tackling organ and tissue shortages. Such a role cannot be adequately performed if nurses are not fully educated about donation and transplant. Such education could be incorporated into mandatory training and completed by all nurses.

Improved extraction of arabinoxylans from rye bran and production of health beneficial oligosaccharides

Dissertação de mest., Engenharia Biológica, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2011

O trompe l’oeil barroco na Igreja do Menino Deus em Lisboa : métodos e técnicas

Tese de doutoramento, Belas-Artes (Geometria), Universidade de Lisboa, Faculdade de Belas-Artes, 2014

Acompanhamento de obra: optimização de soluções: técnicas de cofragem (Atlântico Estoril Residence)

Relatório de Estágio para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações