Lujasta rakenneteräksestä tehdyn rakenteen vikasietoisuuden määritys

Tässä työssä tutkittiin Ruukin valmistamista lujista Optim 700 MC Plus sekä Optim 700 QL teräksistä tehtyjen hitsattujen palkkirakenteiden vikasietoisuutta sekä murtumiskäyttäytymistä laboratoriossa suoritettujen täyden mittakaavan kokeiden avulla. Koerakenteet suunniteltiin siten, että rakenteen kylmämuovauksen sekä hitsauksen vaikutukset yhdessä rakenteen geometrian vaikutuksen kanssa heikentävät rakenteen murtumissitkeyttä rakenteeseen tehdyn teräväkärkisen alkusärön tasossa. Suunnitellussa koesarjassa varioidaan testauslämpötilan lisäksi hitsauksen lämmöntuontia sekä koerakenteeseen tehtävän alkusärön kokoa. Tässä työssä tavoitteena oli yleisesti esittää menettely hitsatun säröllisen teräsrakenteen kestävyyden arviointia varten. Optim 700 MC Plus teräksestä tehdyn koerakenteen käyttäytymistä tutkittiin laskennallisesti murtumismekaniikan avulla. Laadittujen FEM - mallien avulla laskettiin rakenteen murtumisparametrien arvot kummallekin tutkittavalle teräkselle. Optim 700 MC Plus materiaalista valmistetuille koerakenteen säröalueen rakennedetaljia vastaavalle koekappaleille suoritettiin murtumissitkeyskokeita. Murtumissitkeyskokeista saatujen tulosten avulla pystyttiin kuvaamaan täyden mittakaavan koerakenteessa olevan särön murtumiskäyttäytymistä mitoitusmenetelmissä. Koerakenteelle laskettiin tässä työssä kriittisen särökoon ja sitä vastaavan kuorman arvot perustuen rakenteen oletettuun hauraaseen, epästabiiliin sitkeään sekä plastiseen murtumiskäyttäytymiseen. Tässä työssä testattiin molemmista tutkittavista materiaaleista valmistetut täyden mittakaavan koerakenteet -40 °C lämpötilassa. Molemmat testatut rakenteet käyttäytyvät mitattujen siirtymätulosten perusteella melko hauraasti. Optim 700 MC Plus materiaalille saatujen laskentatulosten voidaan todeta testatun koekappaleen perusteella soveltuvan hauraasti käyttäytyvän rakenteen mitoitukseen.

Convenience of scallops in plate structures

In this thesis was performed comprehensive study about the convenience of scallops in plate structures. A literature review was performed and lack of knowledge was fulfilled with fatigue tests performed in the laboratory of Steel Structures at the Lappeenranta University of Technology and with finite element method. The aim of this thesis was to produce design guidance for the use of scallops for different structural details and different loading conditions. An additional aim was to include more precise instructions for scallop design to produce good fatigue resistance and appropriate manufacturing quality. The literature review was performed searching bridge engineering and maritime standards and design guides and studies from scientific databases and reference lists from the literature of this field. Fatigue tests were used to research the effect of using scallops or not using scallops to fatigue strength of bracket specimen. Tests were performed on three specimens with different scallop radii and to five specimens without scallops with different weld penetration depths. Finite element method using solid elements, symmetry and submodels was used to determine stress concentration factors for I-beams with scallops. Stresses were defined with hot spot stress method. Choosing to use a scallop or not in the structure is affected by many factors, such as structural and loading conditions and manufacturability. As a rule of thumb, scallops should be avoided because those cause stress concentration points to the structure and take a lot of time to manufacture. When scallops are not used, good quality welding should be provided and full weld penetration is recommended to be used in load carrying corner weld areas. In some cases, it is advisable to use scallops. In that case, circular scallops are recommended to be used and radius should be chosen from fatigue strength or manufacturing point of view.

Vieillissement vasculaire chez des patients athérosclérotiques: Sénescence prématurée des cellules endothéliales?

La dysfonction de l’endothélium vasculaire, associée à une diminution de ses propriétés vasorelaxantes et anti-thrombogéniques, survient avec le vieillissement mais également chez de plus jeunes patients athérosclérotiques présentant plusieurs facteurs de risque cardiovasculaire. Au niveau cellulaire, le vieillissement des cellules endothéliales (CE) mène à un état irréversible de non division cellulaire appelé sénescence. Ces cellules sénescentes présentent des changements spécifiques au niveau de leur morphologie et de l’expression génique, menant à leur dysfonction. La sénescence dite réplicative est déclenchée par le raccourcissement des télomères survenant à chaque division cellulaire, mais peut également être induite prématurément par le stress oxydant (SIPS). L’objectif principal de cette étude est de caractériser la sénescence de CE vasculaires isolées à partir de patients athérosclérotiques, et d’observer l’impact des facteurs de risque sur cette sénescence. Afin de confirmer la contribution des deux principales voies de la sénescence, nous avons par la suite étudié conjointement ou séparément, l’impact d’un traitement chronique avec un antioxydant sur la sénescence de CE, et d’une surexpression de la sous-unité catalytique de la télomérase (hTERT), une enzyme responsable de l’allongement des télomères. Nous avons isolé et cultivé des CE provenant d’artères mammaires internes prélevées lors de pontages coronariens. Selon les études, les cellules ont été infectées ou non avec un lentivirus surexprimant la hTERT, et cultivées in vitro jusqu’à sénescence, en présence ou en absence de l’antioxydant N-acétyl-L-cystéine (NAC). Différents marqueurs des deux principales voies de la sénescence (réplicative ou SIPS) ont été quantifiés. La sénescence cellulaire se développe exponentiellement avec le temps et est associée à une réduction de la viabilité et de la prolifération cellulaires. Chez les patients athérosclérotiques, le vieillissement des CE passe par les deux principales voies de la sénescence : des télomères courts initialement en culture et la durée d’exposition in vivo aux facteurs de risque cardiovasculaire prédisent une apparition prématurée de la sénescence. Toutefois, chez les fumeurs, la sénescence est exclusivement du type SIPS. Ces facteurs de risque cardiovasculaire et principalement l’hypertension, semblent accélèrer le vieillissement biologique et favoriser la dysfonction des CE. Lorsque traitées chroniquement avec le NAC, les CE présentant initialement de moindres dommages cellulaires et moléculaires ainsi qu’une meilleure défense antioxydante développent une sénescence retardée. Lorsque le NAC est combiné à une surexpression de la hTERT, les deux voies de la sénescence sont bloquées et une immortalisation cellulaire est observée. À l’inverse, dans les CE les plus endommagées par les ROS in vivo, le NAC n’a aucun effet sur le développement de la sénescence, la hTERT, seule ou en combinaison avec le NAC, retarde légèrement la sénescence mais aucune immortalisation n’est observée lorsque ces traitements sont combinés. En conclusion, nos études démontrent que l’exposition chronique au stress oxydant associé aux facteurs de risque cardiovasculaire accélère le développement de la sénescence de CE vasculaires, contribuant potentiellement à l’athérogénèse. Dans les cellules de patients athérosclérotiques, il semble exister un seuil de dommages cellulaires et moléculaires subis in vivo au-delà duquel, aucun traitement (antioxydant ou hTERT) ne peut être bénéfique.

Studies of cap-independent mRNA translation in Drosophila melanogaster

Control of protein synthesis is a key step in the regulation of gene expression during apoptosis and the heat shock response. Under such conditions, cap-dependent translation is impaired and Internal Ribosome Entry Site (IRES)-dependent translation plays a major role in mammalian cells. Although the role of IRES-dependent translation during apoptosis has been mainly studied in mammals, its role in the translation of Drosophila apoptotic genes has not been yet studied. The observation that the Drosophila mutant embryos for the cap-binding protein, the eukaryotic initiation factor eIF4E, exhibits increased apoptosis in correlation with up-regulated proapoptotic gene reaper (rpr) transcription constitutes the first evidence for the existence of a cap-independent mechanism for the translation of Drosophila proapoptotic genes. The mechanism of translation of rpr and other proapoptotic genes was investigated in this work. We found that the 5 UTR of rpr mRNA drives translation in an IRES-dependent manner. It promotes the translation of reporter RNAs in vitro either in the absence of cap, in the presence of cap competitors, or in extracts derived from heat shocked and eIF4E mutant embryos and in vivo in cells transfected with reporters bearing a non functional cap structure, indicating that cap recognition is not required in rpr mRNA for translation. We also show that rpr mRNA 5 UTR exhibits a high degree of similarity with that of Drosophila heat shock protein 70 mRNA (hsp70), an antagonist of apoptosis, and that both are able to conduct IRES-mediated translation. The proapoptotic genes head involution defective (hid) and grim, but not sickle, also display IRES activity. Studies of mRNA association to polysomes in embryos indicate that both rpr, hsp70, hid and grim endogenous mRNAs are recruited to polysomes in embryos in which apoptosis or thermal stress was induced. We conclude that hsp70 and, on the other hand, rpr, hid and grim which are antagonizing factors during apoptosis, use a similar mechanism for protein synthesis. The outcome for the cell would thus depend on which protein is translated under a given stress condition. Factors involved in the differential translation driven by these IRES could play an important role. For this purpose, we undertook the identification of the ribonucleoprotein (RNP) complexes assembled onto the 5 UTR of rpr mRNA. We established a tobramycin-affinity-selection protocol that allows the purification of specific RNP that can be further analyzed by mass spectrometry. Several RNA binding proteins were identified as part of the rpr 5 UTR RNP complex, some of which have been related to IRES activity. The involvement of one of them, the La antigen, in the translation of rpr mRNA, was established by RNA-crosslinking experiments using recombinant protein and rpr 5 UTR and by the analysis of the translation efficiency of reporter mRNAs in Drosophila cells after knock down of the endogenous La by RNAi experiments. Several uncharacterized proteins were also identified, suggesting that they might play a role during translation, during the assembly of the translational machinery or in the priming of the mRNA before ribosome recognition. Our data provide evidence for the involvement of La antigen in the translation of rpr mRNA and set a protocol for purification of tagged-RNA-protein complexes from cytoplasmic extracts. To further understand the mechanisms of translation initiation in Drosophila, we analyzed the role of eIF4B on cap-dependent and cap-independent translation. We showed that eIF4B is mostly involved in cap-, but not IRES-dependent translation as it happens in mammals.

La familia del paciente en Unidad de Cuidado Intensivo (UCI)

Introducción: Ingresar a la UCI no es una experiencia exclusiva del paciente; implica e involucra directamente a la familia, en aspectos generadores de estrés, estrategias de afrontamiento, temores, actitudes y expectativas, la participación de la familia en el cuidado y el rol del psicólogo. Objetivo: Revisar de los antecedentes teóricos y empíricos sobre la experiencia de la familia en UCI. Metodología: Se revisaron 62 artículos indexados en bases de datos. Resultados: la UCI es algo desconocido tanto para el paciente como para la familia, por esto este entorno acentúa la aparición de síntomas ansiosos, depresivos y en algunos casos estrés post traumático. La muerte es uno de los principales temores que debe enfrentar la familia. Con el propósito de ajustarse a las demandas de la UCI, los familiares exhiben estrategias de afrontamiento enfocadas principalmente en la comunicación, el soporte espiritual y religioso y la toma de decisiones. El cuidado centrado en la familia permite una mejor comunicación, relación con el paciente y personal médico. El papel del psicólogo es poco explorado en el espacio de la UCI, pero este puede promover estrategias de prevención y de rehabilitación en el paciente y su grupo familiar. Discusión: es importante tener en cuenta que la muerte en UCI es una posibilidad, algunos síntomas como ansiedad, depresión pueden aparecer y mantenerse en el tiempo, centrar el cuidado en la familia permite tomar las decisiones basados en el diagnóstico y pronóstico y promueve expectativas realistas. Conclusiones: temores, expectativas, actitudes, estrategias de afrontamiento, factores generadores de estrés permiten explicar y comprender la experiencia de la familia del paciente en UCI.

Relación de los factores laborales e individuales con la carga mental de los trabajadores de una institución minera (2014)

Objetivo: Establecer la relación de los factores laborales e individuales con la carga mental en los trabajadores del área de contratación y titulación minera y los de seguimiento y control en una institución minera durante el año 2014. Materiales y métodos: Estudio de corte transversal en 298 trabajadores que trabajan en una Institución Minera, en la ciudad de Bogotá. La identificación de los factores laborales e individuales relacionados con la carga mental se hizo mediante la aplicación de un cuestionario autodiligenciado utilizando la guía de Estimación de la carga mental de trabajo: método NASA TLX, en el cual se realizó análisis de medidas de tendencia central y se indagó relación a través de la prueba Chi cuadrado de Pearson, usando nivel de significación del 5%, con el programa SPSS 20. Resultados: La población predominante era de género masculino, donde la mayoría de los trabajadores fueron ingenieros pertenecientes al área de seguimiento y control, se evidenció asociación estadísticamente significativa entre la profesión con la percepción de exigencia física (p ≤ 0,001), de igual modo entre área de trabajo con la percepción de exigencia mental (p ≤ 0,001), en la cual se establece que la carga mental y el factor profesional (técnicos) y el factor laboral (área de seguimiento y control), son determinantes para la aparición de fatiga fisiológica y cognitiva, ya que en estos se evidencia mayor exigencia física en los trabajadores técnicos con un 81,40% y en los trabajadores del área de seguimiento y control con un 99,04%. Conclusión: Se encontró una alta exigencia mental, temporal y esfuerzo en los trabajadores y una relación significativa entre la profesión con la percepción de exigencia física, predominando en los técnicos, seguidos de abogados e ingenieros y entre el área de trabajo con la percepción de exigencia mental, siendo mayor en el área de seguimiento y control.

Rate-dependent fracture toughness of polycrystalline ice

A series of three-point bend tests using single edge notched testpieces of pure polycrystalline ice have been performed at three different temperatures (–20°C, –30°C and –40°C). The displacement rate was varied from 1 mm/min to 100 mm/min, producing the crack tip strain rates from about 10–3 to 10–1 s–1. The results show that (a) the fracture toughness of pure polycrystalline ice given by the critical stress intensity factor (K IC) is much lower than that measured from the J—integral under identical conditions; (b) from the determination of K IC, the fracture toughness of pure polycrystalline ice decreases with increasing strain rate and there is good power law relationship between them; (c) from the measurement of the J—integral, a different tendency was appeared: when the crack tip strain rate exceeds a critical value of 6 × 10–3 s–1, the fracture toughness is almost constant but when the crack tip strain rate is less than this value, the fracture toughness increases with decreasing crack tip strain rate. Re-examination of the mechanisms of rate-dependent fracture toughness of pure polycrystalline ice shows that the effect of strain rate is related not only to the blunting of crack tips due to plasticity, creep and stress relaxation but also to the nucleation and growth of microcracks in the specimen.

Describing fatigue crack growth and load ratio effects in Al 2524 T3 alloy with an enhanced exponential model

The fatigue crack behavior in metals and alloys under constant amplitude test conditions is usually described by relationships between the crack growth rate da/dN and the stress intensity factor range Delta K. In the present work, an enhanced two-parameter exponential equation of fatigue crack growth was introduced in order to describe sub-critical crack propagation behavior of Al 2524-T3 alloy, commonly used in aircraft engineering applications. It was demonstrated that besides adequately correlating the load ratio effects, the exponential model also accounts for the slight deviations from linearity shown by the experimental curves. A comparison with Elber, Kujawski and "Unified Approach" models allowed for verifying the better performance, when confronted to the other tested models, presented by the exponential model. (C) 2012 Elsevier Ltd. All rights reserved.

Biomechanics Studies in Dentistry: Bioengineering Applied in Oral Implantology

The application of engineering knowledge in dentistry has helped the understanding of biomechanics aspects related to osseointegrated implants. Several techniques have been used to evaluate the biomechanical load oil implants comprising the use of photoelastic stress analysis, finite element stress analysis, and strain-gauge analysis. Therefore, the purpose of this Study was to describe engineering methods used in dentistry to evaluate the biomechanical behavior of osseointegrated implants. Photoelasticity provides good qualitative information oil the overall location and concentration of stresses but produces limited quantitative information. The method serves as ail important tool for determining the critical stress points in a material and is often used for determining stress concentration factors in irregular geometries. The application of strain-gauge method oil dental implants is based oil the use of electrical resistance strain gauges and its associated equipment and provides both in vitro and vivo measurements strains under static and dynamic loads. However, strain-gauge method provides only the data regarding strain at the gauge. Finite element analysis can Simulate stress using a computer-created model to calculate stress, strain, and displacement. Such analysis has the advantage of allowing several conditions to be changed easily and allows measurement of stress distribution around implants at optional points that are difficult to examine clinically All the 3 methodologies call be useful to evaluate biomechanical implant behavior close to the clinical condition but the researcher should have enough knowledge in model fabrication (experimental delineation) and results analysis.

Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

Objectives. Evaluate the flexural strength (sigma) and subcritical crack growth (SCG) under cyclic loading of glass-infiltrated alumina-based (IA, In-Ceram Alumina) and zirconia-reinforced (IZ, In-Ceram Zirconia) ceramics, testing the hypothesis that wet environment influences the SCG of both ceramics when submitted to cyclic loading.Methods. Bar-shaped specimens of IA (n = 45) and IZ ( n = 45) were fabricated and loaded in three-point bending (3P) in 37 degrees C artificial saliva (IA(3P) and IZ(3P)) and cyclic fatigued (F) in dry (D) and wet (W) conditions (IA(FD), IA(FW), IZ(FD), IZ(FW)). The initial sigma and the number of cycles to fracture were obtained from 3P and F tests, respectively. Data was examined using Weibull statistics. The SCG behavior was described in terms of crack velocity as a function of maximum stress intensity factor (K(Imax)).Results. The Weibull moduli (m = 8) were similar for both ceramics. The characteristic strength (sigma(0)) of IA and IZ was and 466 MPa 550 MPa, respectively. The wet environment significantly increased the SCG of IZ, whereas a less evident effect was observed for IA. In general, both ceramics were prone to SCG, with crack propagation occurring at K(I) as low as 43-48% of their critical K(I). The highest sigma of IZ should lead to longer lifetimes for similar loading conditions.Significance. Water combined with cyclic loading causes pronounced SCG in IZ and IA materials. The lifetime of dental restorations based on these ceramics is expected to increase by reducing their direct exposure to wet conditions and/or by using high content zirconia ceramics with higher strength. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Characteristics of the double-torsion test to determine the R-curve of ceramic materials

Double-torsion tests were carried out on a commercial ceramic floor tile to verify whether this test is suitable for determining the R-curve of ceramics. The instantaneous crack length was obtained by means of compliance calibration, and it was found that the experimental compliance underestimates the real crack length. The load vs. displacement curves were also found to drop after maximum loading, causing the stress intensity factor to decline. The R-curves were calculated by two methods: linear elastic fracture mechanics and the energetic method. It was obtained that the average values of crack resistance, R, and the double of the work of fracture, 2 · γwof, did not depend on notch length, a0, which is a highly relevant finding, indicating that these parameters were less dependent on the test specimen's geometry. The proposal was to use small notches, which produce long stable crack propagation paths that in turn are particularly important in the case of coarse microstructures.

Fatigue apparatus for geometrically complex non-standardized specimens

Standard Test Methods (e.g. ASTM, DIN) for materials characterization in general, and for fatigue in particular, do not contemplate specimens with complex geometries, as well as the combination of axial and in-plane bending loads in their methodologies. The present study refers to some patents and the new configuration or configurations of specimens (non-standardized by the status quo of test methods) and a device developed to induce axial and bending combined forces resultants from axial loads applied by any one test equipment (dynamic or monotonic) which possesses such limitation, towards obtaining more realistic results on the fatigue behavior, or even basic mechanical properties, from geometrically complex structures. Motivated by a specific and geometrically complex aeronautic structure (motor-cradle), non-standardized welded tubular specimens made from AISI 4130 steel were fatigue-tested at room temperature, by using a constant amplitude sinusoidal load of 20 Hz frequency, load ratio R = 0.1 with and without the above referred auxiliary fatigue apparatus. The results showed the fatigue apparatus was efficient for introducing higher stress concentration factor at the welded specimen joints, consequently reducing the fatigue strength when compared to other conditions. From the obtained results it is possible to infer that with small modifications the proposed apparatus will be capable to test a great variety of specimen configurations such as: squared tubes and plates with welded or melted junctions, as well as other materials such as aluminum, titanium, composites, polymeric, plastics, etc. © 2009 Bentham Science Publishers Ltd.

Role of stressful and traumatic life events in obsessive-compulsive disorder

Whilst genetic factors are thought to contribute to the development of obsessive-compulsive disorder (OCD), the role of environmental factors in OCD is only beginning to be understood. In this article, we review the influence of stress-related factors in OCD. Overall, studies indicate that: patients with OCD frequently report stressful and traumatic life events before illness onset, although these rates do not seem to be significantly different from those described in other disorders; the association between OCD and post-traumatic stress disorder (PTSD) might result from symptom overlap, although cases of patients developing OCD after PTSD and showing obsessive-compulsive symptoms that were unrelated to trauma have been described fairly consistently; it is unclear whether patients with OCD and a history of stress-related factors (including stressful life events, traumatic life events or comorbid PTSD) may respond better or worse to the available treatments; and comorbid PTSD may modify the clinical expression of OCD-although controlled studies comparing pre-versus post-traumatic OCD patients are still unavailable. In conclusion, there is a growing evidence to suggest a role for stress-related factors in OCD. Although the available literature does not confirm the existence of a post-traumatic subtype of OCD, it does call for further systematic research into this topic. © 2011 Future Medicine Ltd.

Fractografia quantitativa de superfícies obtidas em ensaios de propagação de trincas por fadiga em aço inoxidável 15 –5PH

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da fadiga cíclica na resistência, crescimento subcrítico de trincas e tempo de vida de cerâmicas a base de alumina infiltradas por vidro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)