Pigment distribution in surface sediments of the North Atlantic Ocean

In an extended deep-sea study the response of the benthic community to seasonally varying sedimentation rates of organic matter were investigated at a fixed abyssal site in the NE Atlantic (BIOTRANS station or JGOFS station L2 at 47°N-20°W, water depth >4500 m) on four legs of METEOR expedition 21 between March and August 1992. The vertical flux at 3500 m depth and temporal variations in the chloroplastic pigment concentration, a measure of phytodetritus deposition, and of total adenylates and total phospholipids, measures of benthic biomass, and of activity of hydrolytic enzymes were observed. The flux patterns in moored sediment traps of total chlorophyll, POC and total flux showed an early sedimentation peak in March/April 1992, followed by low fluxes in May and intermediate ones from June to August. Thus 1992 differed from other years, in which one large flux peak after the spring phytoplankton bloom was observed. Unusually high concentrations of chloroplastic pigments were consistently observed in March 1992, reflecting the early sedimentation input. At the same time biomass of small benthic organisms (bacteria to meiobenthos) and activity of hydrolytic enzymes were higher compared to values from March 1985 and from the following months in 1992. In May and August 1992 pigment concentrations and biomass and activity parameters in the sediment were lower than during previously observed depositions of phytodetrital matter in summer. The data imply that the deep ocean benthic community reacts to small sedimentation events with transient increases in metabolic activity and only small biomass production. The coupling between pelagic and benthic processes is so close that interannual variability in surface water production is "mirrored" by deep-sea benthic processes.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Efectos del régimen de propiedad intelectual de obtenciones vegetales en la seguridad y la soberanía alimentaria de México (20 años del TLCAN)

Este estudio de caso pretende explicar los efectos del actual del régimen de propiedad intelectual de obtenciones en la seguridad y la soberanía alimentaria de México. A pesar de algunos esfuerzos hechos por parte del Estado Mexicano por defender y apoyar el modo de producción familiar a pequeña escala, los efectos de este régimen y de la liberalización del comercio han llevado a que se desarrolle más el modo de producción agrícola industrial al cual suelen acceder principalmente los medianos y grandes productores agrícolas, afectando la seguridad y la soberanía alimentaria de México.

Power relations and small and medium-sized enterprise strategies for capturing value in global production networks: visual effects (VFX) service firm in the Hollywood film industry

Power relations and small and medium-sized enterprise strategies for capturing value in global production networks: visual effects (VFX) service firms in the Hollywood film industry, Regional Studies. This paper provides insights into the way in which non-lead firms manoeuvre in global value chains in the pursuit of a larger share of revenue and how power relations affect these manoeuvres. It examines the nature of value capture and power relations in the global supply of visual effects (VFX) services and the range of strategies VFX firms adopt to capture higher value in the global value chain. The analysis is based on a total of thirty-six interviews with informants in the industry in Australia, the United Kingdom and Canada, and a database of VFX credits for 3323 visual products for 640 VFX firms.

Shifting from production to purpose : facilitating design-led change in a small family-owned enterprise

This research was embedded as a Design-led Innovation catalyst within a family-owned small business, to explore the application of a design program to achieve organizational change. Based on the findings two new models for increasing design integration within an organisation were proposed, establishing a range of pre-requisites needed for a firm to progress. Struggling firms may leverage their use of design and strategy by embedding a catalyst in a new cross-disciplinary role providing the necessary internal assistance. The study demonstrated that even non-design or strategy-inclined family-owned SMEs could benefit from embarking on a design-led journey to boost their competitive preparedness.

Improving added value and small medium enterprises capacity in the utilisation of plantation timber for furniture production in Jepara region

Improving added value and Small Medium Enterprises capacity in the utilisation of plantation timber for furniture production in Jepara region of Indonesia: improving recovery, design, manufacturing, R&D and training capacities.

Unusual RNA plant virus integration in the soybean genome leads to the production of small RNAs

Horizontal gene transfer (HGT) is known to be a major force in genome evolution. The acquisition of genes from viruses by eukaryotic genomes is a well-studied example of HGT, including rare cases of non-retroviral RNA virus integration. The present study describes the integration of cucumber mosaic virus RNA-1 into soybean genome. After an initial metatranscriptomic analysis of small RNAs derived from soybean, the de novo assembly resulted a 3029-nt contig homologous to RNA-1. The integration of this sequence in the soybean genome was confirmed by DNA deep sequencing. The locus where the integration occurred harbors the full RNA-1 sequence followed by the partial sequence of an endogenous mRNA and another sequence of RNA-1 as an inverted repeat and allowing the formation of a hairpin structure. This region recombined into a retrotransposon located inside an exon of a soybean gene. The nucleotide similarity of the integrated sequence compared to other Cucumber mosaic virus sequences indicates that the integration event occurred recently. We described a rare event of non-retroviral RNA virus integration in soybean that leads to the production of a double-stranded RNA in a similar fashion to virus resistance RNAi plants.

Small scale commercial production of tilapia fingerlings in floating bamboo net-hapas

The inadequate supply of tilapia seed is considered as one of the major present constraints to the development of the culture industry in Nigeria. The floating bamboo net-hapa hatchery/nursery system was observed to be very efficient in the mass production of tilapia (Oreochromis niloticus) fry and fingerlings at Kainji Lake Research Institute. This system was therefore, recommended for small-scale (artisanal) commercial operators consisting of fishermen families in order to increase their productivity and hasten development of rural communities. The economic analysis of this system showed that loan obtained for the recommended scale of operation can be amortized within 2 years of the project. It was emphasized that the operational and managerial skills of the fish farm operators account largely to the production cost and profitability of the enterprise

Small-scale commercial production of tilapia fry and fingerlings in concrete raceways

This paper discusses the investment prospects in Tilapia fry and fingerling production in raceways created from the concrete drainage channel of a reservoir or pond of an existing fish farm in Nigeria. With an initial capital of 1,300 and an annual operating cost of 310 spent on procurement of fish feed and brood stock for a 10 m super(2) raceway per se, a net profit of 4,100 and 5,090 would be realized from Sarotherodon galilaeus in the first year and subsequent years of production respectively, assuming that the fingerling production rate has been maintained through the production period. It is concluded that the application of this approach of optimizing the use of available resources in the fish farm for the productive breeding of Tilapia fry and fingerlings will apart from alleviating the problem of scarcity of stocking materials in the country, increase the profit margin accruing to the fish farmer

Intensive small scale cage, pen and enclosure fish production systems: towards 2010

A brief review of most of the publications by the author and other relevant workers on the three water-based fish culture systems was made. The present status of the culture systems in the National Food/Fish Programmes was highlighted. Strategies were advanced towards a successful implementation of the intensive water-based culture systems project as a contribution towards alleviating poverty, hunger and malnutrition under the concept of VISION 2010

Small water bodies for sustainable fisheries production

A brief account is given of some of the discussions presented at a workshop regarding reservoir fisheries in Asia held in Hangzhou, China in Oct 1990. The presentations covered the range of reservoir fisheries management options, from basic limnological research and capture fisheries to intensive cage culture. Particular reference is made to the situation in China, describing current techniques used for stocking and developing reservoir fisheries.

Production and conservation of nutrient-rich small fish (SIS) in ponds and wetlands for nutrition security and livelihoods in South Asia: Proceedings of a World Bank/SAFANSI funded regional workshop on small fish and nutrition, Dhaka, Bangladesh, 1st - 2nd March 2014

Small indigenous fish species (SIS) are an important source of essential macro- and micronutrients that can play an important role in the elimination of malnutrition and micronutrient deficiencies in the populations of many South and Southeast Asian countries. Of the 260 freshwater fish species in Bangladesh, more than 140 are classified as SIS and are an integral part of the rural Bangladeshi diet. As many SIS are eaten whole, with organs and bones, they contain high amounts of vitamins and minerals, including calcium, and iron and zinc. Some SIS, such as mola, are also rich in vitamin A. SIS are often cooked with vegetables and a little oil, so they contribute to the food diversity of the rural poor.SIS are recognized as a major animal-source food group, contributing to improved food and nutrition security and livelihoods of the people of South and Southeast Asia. The purpose of this workshop is to bring together policy makers, extension agents, researchers, non-governmental and development organizations to share knowledge about small fish, their contribution to better nutrition, production technologies, and strategies for wider dissemination of pond culture and wetland based-production and conservation technologies. The workshop is expected to generate ideas for further research and development of sustainable technologies for production, management and conservation of SIS for the benefit of the people of Bangladesh as well as the South and Southeast Asian region.

Production of quality dried small indigenous fish species products using low cost solar tunnel drier

A low cost solar drier was constructed using locally available materials. The size of the drier was 20x3.6x3 having drying capacity of 80 kg of SIS (w/w). Optimization of moisture content was observed for mola, dhela, chapila, chanda and puti at temperature ranges between 40-45°C and 50-55°C in solar tunnel drier. There was little or no change in moisture content at temperature below 40°C during the first 3 hours. Then the moisture content declined gradually with the increase of drying period. On the other hand, at temperature between 50-55°C, moisture content started to decline after 2 hours of drying. The moisture content of the sample reached at about 16% after 26 hours of sun drying at 40-45°C and 20 hours at 50-55°C. The optimum temperature for producing high quality dried products was 45-50°C in solar tunnel drier. The temperature and relative humidity outside and inside the dryers (with fish) at various locations were recorded from 8.00am to 4.00pm. The normal atmospheric ambient temperature was recorded in the range of 25-37°C from at 8:00am to 4:00pm. During the same period the atmospheric relative humidity recorded was in the range of 30-58%. On the other hand, the maximum temperature inside the dryers was recorded in the range of 28-65°C. The lowest temperature recorded was 28°C in the morning and at 13.00pm the highest temperature 65°C was recorded. The maximum relative humidity 58% found in the afternoon and minimum of 28% at noon. There was inverse relationship between temperature intensity of sunshine and humidity which decreased as sunshine increased. In total, it took around 26 hours of drying to reduce the moisture level to about 16%.

Application Of (CS)-C-137 fingerprinting technique to interpreting sediment production records from reservoir deposits in a small catchment of the Hilly Loess Plateau；China

IEECAS SKLLQG