Knowing and teaching the indigenous other : teachers’ engagement with Aboriginal and Torres Strait Islander cultures

This is the first empirical study of teacher knowledge and classroom practice in Aboriginal and Torres Strait Islander education. It describes the construction of a survey instrument to measure non-Indigenous Australian teachers’ knowledge of Indigenous culture and place, frequency of everyday intercultural exchanges, and attempts to integrate Indigenous knowledge into classroom practice. Many teachers reported low levels of knowledge of Indigenous cultures, and limited encounters outside of school. While the cohort expressed dissatisfaction with pre-service training, exposure to pre- and in-service courses in Indigenous education correlated with higher levels of cultural knowledge and cultural engagement. Teachers with higher levels of cultural engagement were more likely to attempt to integrate Indigenous knowledges in curriculum and pedagogy.

Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements

The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110]oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire, i.e. the [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt). The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio. Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small. Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one, which implies that experimental predictions of Young’s modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young’s modulus as obtained via resonance testing.

CASNS - A heuristic algorithm for the nesting of irregular-shaped sheet-metal blanks

This article reports on the design and implementation of a computer-aided sheet nesting system (CASNS) for the nesting of two-dimensional irregular-shaped sheet-metal blanks on a given sheet stock or coil stock. The system is designed by considering several constraints of sheet-metal stamping operations, such as bridge width and grain orientation, and design requirements such as maximizing the strength of the part hen subsequent bending is involved, minimization of scrap, and economic justification for'a single or multiple station operation. Through many practical case studies, the system proves its efficiency, effectiveness and usefulness.

CADDS: an automated die design system for sheet-metal blanking

This article reports on the design and implementation of a Computer-Aided Die Design System (CADDS) for sheet-metal blanks. The system is designed by considering several factors, such as the complexity of blank geometry, reduction in scrap material, production requirements, availability of press equipment and standard parts, punch profile complexity, and tool elements manufacturing method. The interaction among these parameters and how they affect designers' decision patterns is described. The system is implemented by interfacing AutoCAD with the higher level languages FORTRAN 77 and AutoLISP. A database of standard die elements is created by parametric programming, which is an enhanced feature of AutoCAD. The greatest advantage achieved by the system is the rapid generation of the most efficient strip and die layouts, including information about the tool configuration.

Cultivating creative ecologies : creative teaching and teaching for creativity

Australian universities now commonly list creativity amongst the generic attributes that graduates are expected to have achieved or demonstrated upon graduation. While this reflects emerging local and global trends to encourage creativity at every educational level, creativity as a generic capability has special difficulties. These include problems of definition, its perceived value, the gap between espoused beliefs and practice, and tensions between standards and accreditation agendas and the desire to embed creative outcomes in the curriculum. Contextual and disciplinary differences also shape the expression of creative teaching and teaching for creativity. This paper explores these issues, acknowledging the role of information and communications technologies in shaping the technology-enhanced learning spaces where creativity may emerge. Csikszentmihalyi’s model of creativity as a system of interactions is presented as a useful foundation for furthering the discourse in this domain, along with the notion of creative ecologies as spaces for effecting change.

Aqueous phase synthesis of copper nanoparticles : a link between heavy metal resistance and nanoparticle synthesis ability in bacterial systems

We demonstrate aqueous phase biosynthesis of phase-pure metallic copper nanoparticles (CuNPs) using a silver resistant bacterium Morganella morganii. This is particularly important considering that there has been no report that demonstrates biosynthesis and stabilization of pure copper nanoparticles in the aqueous phase. Electrochemical analysis of bacterial cells exposed to Cu2+ ions provides new insights into the mechanistic aspect of Cu2+ ion reduction within the bacterial cell and indicates a strong link between the silver and copper resistance machinery of bacteria in the context of metal ion reduction. The outcomes of this study take us a step closer towards designing rational strategies for biosynthesis of different metal nanoparticles using microorganisms.

Kaleidoscope : Reframing learning and teaching evaluation through a shared stakeholder lens

Sector wide interest in Reframe: QUT’s Evaluation Framework continues with a number of institutions requesting finer details as QUT embeds the new approach to evaluation across the university in 2013. This interest, both nationally and internationally has warranted QUT’s collegial response to draw upon its experiences from developing Reframe into distilling and offering Kaleidoscope back to the sector. The word Reframe is a relevant reference for QUT’s specific re-evaluation, reframing and adoption of a new approach to evaluation; whereas Kaleidoscope reflects the unique lens through which any other institution will need to view their own cultural specificity and local context through an extensive user-led stakeholder engagement approach when introducing new approaches to learning and teaching evaluation. Kaleidoscope’s objectives are for QUT to develop its research-based stakeholder approach to distil the successful experience exhibited in the Reframe Project into a transferable set of guidelines for use by other tertiary institutions across the sector. These guidelines will assist others to design, develop, and deploy, their own culturally specific widespread organisational change informed by stakeholder engagement and organisational buy-in. It is intended that these guidelines will promote, support and enable other tertiary institutions to embark on their own evaluation projects and maximise impact. Kaleidoscope offers an institutional case study of widespread organisational change underpinned by Reframe’s (i) evidence-based methodology; (ii) research including published environmental scan, literature review (Alderman, et al., 2012), development of a conceptual model (Alderman, et al., in press 2013), project management principles (Alderman & Melanie, 2012) and national conference peer reviews; and (iii) year-long strategic project with national outreach to collaboratively engage the development of a draft set of National Guidelines. Kaleidoscope’s aims are to inform Higher Education evaluation policy development through national stakeholder engagement, the finalisation of proposed National Guidelines. In correlation with the conference paper, the authors will present a Draft Guidelines and Framework ready for external peer review by evaluation practitioners from the Higher Education sector, as part of Kaleidoscope’s dissemination strategy (Hinton & Gannaway, 2011) applying illuminative evaluation theory (Parlett & Hamilton, 1976), through conference workshops and ongoing discussions (Shapiro, et al., 1983; Jacobs, 2000). The initial National Guidelines will be distilled from the Reframe: QUT’s Evaluation Framework’s Policy, Protocols, and incorporated Business Rules. It is intended that the outcomes of Kaleidoscope are owned by and reflect sectoral engagement, including iterative evaluation through multiple avenues of dissemination and collaboration including the Higher Education sector. The dissemination strategy with the inclusion of Illuminative Evaluation methodology provides an inclusive opportunity for other institutions and stakeholders across the Higher Education sector to give voice through the information-gathering component of evaluating the draft Guidelines, providing a comprehensive understanding of the complex realities experienced across the Higher Education sector, and thereby ‘illuminating’ both the shared and unique lenses and contexts. This process will enable any final guidelines developed to have broader applicability, greater acceptance, enhanced sustainability and additional relevance benefiting the Higher Education sector, and the adoption and adaption by any single institution for their local contexts.

Variability of metal composition and concentrations in road dust in the urban environment

Urban road dust comprises of a range of potentially toxic metal elements and plays a critical role in degrading urban receiving water quality. Hence, assessing the metal composition and concentration in urban road dust is a high priority. This study investigated the variability of metal composition and concentrations in road dust in 4 different urban land uses in Gold Coast, Australia. Samples from 16 road sites were collected and tested for selected 12 metal species. The data set was analyzed using both univariate and multivariate techniques. Outcomes of the data analysis revealed that the metal concentrations in road dust differ considerably within and between different land uses. Iron, aluminum, magnesium and zinc are the most abundant in urban land uses. It was also noted that metal species such as titanium, nickel, copper and zinc have the highest concentrations in industrial land use. The study outcomes revealed that soil and traffic related sources as key sources of metals deposited on road surfaces.

From policy borrowing to implementation : an illuminative evaluation of learning and teaching in higher education in Australia (2002 to 2008)

This study documents and theorises the consequences of the 2003 Australian Government Reform Package focussed on learning and teaching in Higher Education during the period 2002 to 2008. This is achieved through the perspective of program evaluation and the methodology of illuminative evaluation. The findings suggest that the three national initiatives of that time, Learning and Teaching Performance Fund (LTPF), Australian Learning and Teaching Council (ALTC), and Australian Universities Quality Agency (AUQA), were successful in repositioning learning and teaching as a core activity in universities. However, there were unintended consequences brought about by international policy borrowing, when the short-lived nature of LTPF suggests a legacy of quality compliance rather than one of quality enrichment.

Framing student evaluations of university learning and teaching : discursive strategies and textual outcomes

Evaluation in higher education is an evolving social practice, that is, it involves what people, institutions and broader systems do and say, how they do and say it, what they value, the effects of these practices and values, and how meanings are ascribed. The textual products (verbal, written, visual, gestural) that inform and are produced by, for and through evaluative practices are important as they promulgate particular kinds of meanings and values in specific contexts. This paper reports on an exploratory study that sought to investigate, using discourse analysis, the types of evaluative practices that were ascribed value, and the student responses that ensued, in different evaluative instruments. Findings indicate that when a reflective approach is taken to evaluation, students’ responses are more considered, they interrogate their own engagement in the learning context and they are more likely to demonstrate reconstructive thought. These findings have implications for reframing evaluation as reflective learning.

Caught in the headlights: Designing for creative learning and teaching in higher education

This study was an exploration of the different ways that educators conceptualise and approach creative learning and teaching. The research revealed theoretical and practice-based insights, demonstrating that exemplary teachers adopt an ecological approach to designing for student creativity; this approach acknowledges and works with the complexity of the higher education environment and the dynamic relationships between students, peers and teachers. The inquiry confirmed the value of using learning design patterns to uncover hidden creative processes.

Feeling the pressure: Early childhood educators’ reported views about learning and teaching phonics in Australian prior-to-school settings

Early childhood educators’ beliefs about literacy teaching can impact on the types of phonics experiences educators provide for children in prior-to-school settings. The Australian Early Years Learning Framework supports a play-based, intentional approach to teaching phonics, however little is known about what Australian early childhood educators believe is important in teaching phonics in the prior-to-school years. Using a qualitative content analysis, this research study investigates 115 early childhood educators’ views about how phonics should be taught and the use of commercially produced phonics programs (e.g. Jolly Phonics and Letterland) in prior-to-school settings. This study further investigates educators’ perceived pressures to include structured phonics lessons, as a way of addressing parental notions of ‘school readiness’. The results of this study indicate conflicting views were held about how phonics should be taught. Some educators also experienced external pressures to engage in literacy practices that may be in opposition with their own beliefs about how literacy is learnt. This study provides insights into the pedagogical practices early childhood educators believe are appropriate when teaching phonics. The educational implications are discussed.

The paradox of creative uncertainty in learning and teaching

In an ever-changing and globalised world there is a need for higher education to adapt and evolve its models of learning and teaching. The old industrial model has lost traction, and new patterns of creative engagement are required. These new models potentially increase relevancy and better equip students for the future. Although creativity is recognised as an attribute that can contribute much to the development of these pedagogies, and creativity is valued by universities as a graduate capability, some educators understandably struggle to translate this vision into practice. This paper reports on selected survey findings from a mixed methods research project which aimed to shed light on how creativity can be designed for in higher education learning and teaching settings. A social constructivist epistemology underpinned the research and data was gathered using survey and case study methods. Descriptive statistical methods and informed grounded theory were employed for the analysis reported here. The findings confirm that creativity is valued for its contribution to the development of students’ academic work, employment opportunities and life in general; however, tensions arise between individual educator’s creative pedagogical goals and the provision of institutional support for implementation of those objectives. Designing for creativity becomes, paradoxically, a matter of navigating and limiting complexity and uncertainty, while simultaneously designing for those same states or qualities.

Grant application: QUT Learning and Teaching scheme 2012 Cracking the Code - A checklist to complement CRAs for first year Justice students.

Widening participation brings with it increasing diversity, increased variation in the level of academic preparedness (Clarke, 2011; Nelson, Clarke, & Kift 2010). Cultural capital coupled with negotiating the academic culture creates an environment based on many assumptions about academic writing and university culture. Variations in staff and student expectations relating to the teaching and learning experience is captured in a range of national and institutional data (AUSSE, CEQ, LEX). Nationally, AUSSE data (2009) indicates that communication, writing, speaking and analytic skills, staff expectations are quite a bit higher than students. The research team noted a recognisable shift in the changing cohort of students and their understanding and engagement with feedback and CRAs, as well as variations in teaching staff and student expectations. The current reality of tutor and student roles is that: - Students self select when/how they access lectures and tutorials. - Shorter tutorial times result in reduced opportunity to develop rapport with students. - CRAs are not always used consistently by staff (different marking styles and levels of feedback). - Marking is not always undertaken by the student’s tutor/lecturer. - Student support services might be recommended to students once a poor grade has been given. Students can perceive this as remedial and a further sense of failure. - CRA sheet has a mark /grade attached to it. Stigma attached to low mark. Hard to focus on the CRA feedback with a poor mark etched next to it. - Limited opportunities for sessionals to access professional development to assist with engaging students and feedback. - FYE resources exist, however academic time is a factor in exploring and embedding these resources. Feedback is another area with differing expectations and understandings. Sadler (2009) contends that students are not equipped to decode the statements properly. For students to be able to apply feedback, they need to understand the meaning of the feedback statement. They also need to identify, the particular aspects of their work that need attention. The proposed Checklist/guide would be one page and submitted with each assessment piece thereby providing an interface to engage students and tutors in managing first year understandings and expectations around CRAs, feedback, and academic practice.