Experiencias de interoperabilidad entre CRIS y repositorios en Catalunya

Toni Prieto, Técnico IC del Servicio de Bibliotecas y Documentación (SBD) de la UPC, en su presentación 'Experiencias de interoperabilidad entre CRIS y repositorios en Catalunya', describió la integración del repositorio UPCommons y del CRIS DRAC (Descriptor de la Recerca i l'Activitat Acadèmica) de la UPC. El resultado de esta integración es un esquema integrado de archivo CRIS/IR en dos fases, envío y revisión, en el que los metadatos se introducen en DRAC -para posteriormente ser transferidos, validados y enriquecidos si procede- y el archivo de texto completo asociado se realiza en UPCommons. De manera similar funciona la integración de GIR (Gestió Integral de la Recerca, basado en Universitas XXI Investigación) y el repositorio O2 en la UOC, permitiendo la asignación del identificador handle de un ítem en O2 a una referencia en GIR. Ambos sistemas, DRAC en la UPC y GIR en la UOC, están integrados en el Proyecto CVN de generación de CVs normalizados. Se mencionaron asimismo experiencias posteriores de integración CRIS/IR actualmente en curso en la Universitat de Barcelona y en la U Pompeu Fabra, y se mostró el impacto significativo de la estrategia de integración de sistemas sobre el ritmo de incorporación de contenidos a UPCommons.

El camino hacia la integración de sistemas de gestión de la información científica : el TCD (Trinity College Dublin) como estudio de caso. CERIF y euroCRIS

Pablo de Castro, Director de GrandIR, describió la visión que el Grupo euroCRIS tiene de la infraestructura integrada de gestión de la información científica, compuesta por un sistema CRIS institucional, un repositorio de publicaciones y un repositorio de datos y software, y presentó el modelo de infraestructura integrada del Trinity College Dublin (TCD) como estudio de caso internacional. El sistema CRIS del TCD (TCD Research Support System o RSS), desde su primera versión en 2002, está basado en el estándar CERIF, un modelo de descripción de la actividad científica que está adquiriendo una progresiva relevancia como base de los sistemas CRIS en Europa, particularmente en el Reino Unido. Se citaron en la presentación los ensayos para incorporar CERIF al modelo de datos del software ePrints de repositorios, habilitándolo así para soportar parte de las tareas de recolección de información que realiza un CRIS, y la progresiva cobertura de CERIF a ámbitos tales como la gestión de datos de investigación.

La paulatina incorporación del estándar CERIF al diseño de sistemas integrados de gestión científica

Núria Cuní y Juan Pedro Belchi, representantes del Consorcio Sigma Gestión Universitaria, miembro institucional de euroCRIS, hablaron de sus previsiones para la incorporación de CERIF al desarrollo de su módulo Argos para sistemas CRIS universitarios, previa descripción de la aplicación de Argos a la integración de diversos sistemas institucionales en la Universitat Pompeu Fabra. El trabajo de implantación de Argos en la UPF incluyó la puesta a punto del estándar CVN, y en la presentación se relacionó dicho proyecto CVN con la adaptación progresiva del modelo de datos de Argos hacia CERIF.

Implementación de un servicio de apoyo a las convocatorias de evaluación de la investigación

Desde 2011, el Área de Programación y Calidad de la Universitat Oberta de Catalunya (UOC) trabaja de manera transversal con el Grupo de Servicios de Biblioteca de Apoyo a la Investigación para ofrecer un servicio de apoyo a las convocatorias de evaluación de la investigación (AQU, ANECA). Se ha hecho una apuesta institucional para que el profesorado de la UOC supere satisfactoriamente las calificaciones y reconocimientos externos exigidos para las titulaciones del centro y tenga suficiente y valorada experiencia docente e investigadora.

Hierarchical linear models in Psychiatry: A bibliometric study

Development of research methods requires a systematic review of their status. This study focuses on the use of Hierarchical Linear Modeling methods in psychiatric research. Evaluation includes 207 documents published until 2007, included and indexed in the ISI Web of Knowledge databases; analyses focuses on the 194 articles in the sample. Bibliometric methods are used to describe the publications patterns. Results indicate a growing interest in applying the models and an establishment of methods after 2000. Both Lotka"s and Bradford"s distributions are adjusted to the data.

Selecting Scientific Papers for Publication via Citation Auctions

The scientific community has been suffering from peer review for decades. This process (also called refereeing) subjects an author's scientific work or ideas to the scrutiny of one or more experts in the field. Publishers use it to select and screen manuscript submissions, and funding agencies use it to award research funds. The goal is to get authors to meet their discipline's standards and thus achieve scientific objectivity. Publications and awards that haven't undergone peer review are often regarded with suspicion by scholars and professionals in many fields. However, peer review, although universally used, has many drawbacks. We propose replacing peer review with an auction-based approach: the better the submitted paper, the more scientific currency the author likely bid to have it published. If the bid correctly reflects the paper's quality, the author is rewarded in this new scientific currency; otherwise, the author loses this currency. We argue that citations are an appropriate currency for all scientists. We believe that citation auctions encourage scientists to better control their submissions' quality. It also inspire them to prepare more exciting talks for accepted papers and to invite discussion of their results at congresses and conferences and among their colleagues. In the long run, citation auctions could have the power to greatly improve scientific research

Citation auctions as a method to improve selection of scientific papers

This paper describes the basis of citation auctions as a new approach to selecting scientific papers for publication. Our main idea is to use an auction for selecting papers for publication through - differently from the state of the art - bids that consist of the number of citations that a scientist expects to receive if the paper is published. Hence, a citation auction is the selection process itself, and no reviewers are involved. The benefits of the proposed approach are two-fold. First, the cost of refereeing will be either totally eliminated or significantly reduced, because the process of citation auction does not need prior understanding of the paper's content to judge the quality of its contribution. Additionally, the method will not prejudge the content of the paper, so it will increase the openness of publications to new ideas. Second, scientists will be much more committed to the quality of their papers, paying close attention to distributing and explaining their papers in detail to maximize the number of citations that the paper receives. Sample analyses of the number of citations collected in papers published in years 1999-2004 for one journal, and in years 2003-2005 for a series of conferences (in a totally different discipline), via Google scholar, are provided. Finally, a simple simulation of an auction is given to outline the behaviour of the citation auction approach

Integrating CRIS and repository – an overview of the situation in Finland and in three other Nordic countries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Deinking sludge utilization possibilities: technical, economic, and environmental assessments

This report introduces the ENPI project called “EMIR - Exploitation of Municipal and Industrial Residues” which was executed in a co-operation between Lappeenranta University of Technology (LUT), Saint Petersburg State University of Economics (SPbSUE), Saint Petersburg State Technical University of Plant Polymers (SPbSTUPP) and industrial partners from both Leningrad Region (LR), Russia and Finland. The main targets of the research were to identify the possibilities for deinking sludge management scenarios in co-operation with partner companies, to compare the sustainability of the alternatives, and to provide recommendations for the companies in the Leningrad Region on how to best manage deinking sludge. During the literature review, 24 deinking sludge utilization possibilities were identified, the majority falling under material recovery. Furthermore, 11 potential utilizers of deinking sludge were found within the search area determined by the transportation cost. Each potential utilizer was directly contacted in order to establish cooperation for deinking sludge utilization. Finally, four companies, namely, “Finnsementti” – a cement plant in Finland (S1), “St.Gobian Weber” – a light-weight aggregate plant in Finland (S2), “LSR-Cement” – a cement plant in LR (S3), and “Rockwool” – a stone wool plant in LR (S4) were seen as the most promising partners and were included in the economic and environmental assessments. Economic assessment using cost-benefit analysis (CBA) indicated that substitution of heavy fuel oil with dry deinking sludge in S2 was the most feasible option with a benefit/cost ratio (BCR) of 3.6 when all the sludge was utilized. At the same time, the use of 15% of the total sludge amount (the amount that could potentially be treated in the scenario) resulted in a BCR of only 0.16. The use of dry deinking sludge in the production of cement (S3) is a slightly more feasible option with a BCR of 1.1. The use of sludge in stone wool production is feasible only when all the deinking sludge is used and burned in an existing incineration plant. The least economically feasible utilization possibility is the use of sludge in cement production in Finland (S1) due to the high gate fee charged. Environmental assessment was performed applying internationally recognized life cycle assessment (LCA) methodologies: ISO 14040 and ISO 14044. The results of a consequential LCA stated that only S1 and S2 lead to a reduction of all environmental impacts within the impact categories chosen compared to the baseline scenario where deinking sludge is landfilled. Considering S1, the largest reduction of 13% was achieved for the global warming potential (GWP), whereas for S2, the largest decrease of abiotic depletion potential (ADP) was by 1.7%, the eutrophication potential (EP) by 1.8%, and a GWP of 2.1% was documented. In S3, the most notable increase of ADP and acidification potential (AP) by 2.6 and 1.5% was indicated, while the GWP was reduced by 12%, the largest out of all the impact categories. In S4, ADP and AP increased by 2.3 and 2.1% respectively, whereas ODP was reduced by 25%. During LCA, it was noticed that substitution of fuels causes a greater reduction of environmental impact (S1 and S2) than substitution of raw materials (S3 and S4). Despite a number of economically and environmentally acceptable deinking sludge utilization methods being assessed in the research, evaluation of bottlenecks and communications with companies’ representatives uncovered the fact that the availability of the raw materials consumed, and the risks associated with technological problems resulting from the sludge utilization, limited the willingness of industrial partners to start deinking sludge utilization. The research results are of high value for decision-makers at already existing paper mills since the result provide insights regarding alternatives to the deinking sludge utilization possibilities already applied. Thus, the research results support the maximum economic and environmental value recovery from waste paper utilization.

Éléments nécessaires à une recherche évaluative de programmes de formation et de soutien aux préceptrices en sciences infirmières

Travail dirigé présenté à la Faculté des sciences infirmières en vue de l’obtention du grade de Maître ès sciences (M.Sc.) en sciences infirmières option formation

L'avaluació de la recerca. Noves eines?

Conferència emmarcada dins el 2on Workshop Biblioteca UdG: La Universitat de Girona davant els reptes del nou Espai Europeu d'Educació Superior, on es posa de manifest que s'avalua per a poder prioritzar sol·licituds de convocatòries, donar reconeixements, promocionar personal, entre d'altres motius. El que s'avalua són propostes que encara s'han de dur a terme i currículums, i això es fa per mitjà d'avaluacions subjectives (peer-review) i avaluacions objectives (basat en indicadors), tot això s'avalua a partir d'indicis de qualitat de les publicacions

Selecting Scientific Papers for Publication via Citation Auctions

The scientific community has been suffering from peer review for decades. This process (also called refereeing) subjects an author's scientific work or ideas to the scrutiny of one or more experts in the field. Publishers use it to select and screen manuscript submissions, and funding agencies use it to award research funds. The goal is to get authors to meet their discipline's standards and thus achieve scientific objectivity. Publications and awards that haven't undergone peer review are often regarded with suspicion by scholars and professionals in many fields. However, peer review, although universally used, has many drawbacks. We propose replacing peer review with an auction-based approach: the better the submitted paper, the more scientific currency the author likely bid to have it published. If the bid correctly reflects the paper's quality, the author is rewarded in this new scientific currency; otherwise, the author loses this currency. We argue that citations are an appropriate currency for all scientists. We believe that citation auctions encourage scientists to better control their submissions' quality. It also inspire them to prepare more exciting talks for accepted papers and to invite discussion of their results at congresses and conferences and among their colleagues. In the long run, citation auctions could have the power to greatly improve scientific research

Citation auctions as a method to improve selection of scientific papers

This paper describes the basis of citation auctions as a new approach to selecting scientific papers for publication. Our main idea is to use an auction for selecting papers for publication through - differently from the state of the art - bids that consist of the number of citations that a scientist expects to receive if the paper is published. Hence, a citation auction is the selection process itself, and no reviewers are involved. The benefits of the proposed approach are two-fold. First, the cost of refereeing will be either totally eliminated or significantly reduced, because the process of citation auction does not need prior understanding of the paper's content to judge the quality of its contribution. Additionally, the method will not prejudge the content of the paper, so it will increase the openness of publications to new ideas. Second, scientists will be much more committed to the quality of their papers, paying close attention to distributing and explaining their papers in detail to maximize the number of citations that the paper receives. Sample analyses of the number of citations collected in papers published in years 1999-2004 for one journal, and in years 2003-2005 for a series of conferences (in a totally different discipline), via Google scholar, are provided. Finally, a simple simulation of an auction is given to outline the behaviour of the citation auction approach

Evaluación de la ciencia y tecnología como instrumento de intervención del Estado en la Política Nacional de Ciencia, Tecnología e Innovación

El uso de instrumentos y directrices en la política pública para la modelación de los resultados de la actividad científica y tecnológica ha sido frecuente en el Estado colombiano. Este trabajo bajo la ‘teoría de la regulación’ de Black, examina el Modelo de Medición de Grupos de Investigación y de calificación de Revistas Científicas –Publindex- de Colciencias, como instrumentos de intervención del Estado, fundados en el uso de indicadores bibliométricos y cienciométricos. Para ello, se da respuesta a interrogantes referidos a la auto-organización de la ciencia; su relación con el Modelo de Grupos de Investigación, la influencia que dicho modelo tiene sobre la libertad de investigación; las implicaciones que tiene el otorgar categoría o status a los Grupos por actos estatales y la conveniencia de que el Estado tenga un sistema de incentivos para el examen de información científica y técnica originada en indicadores científicos, entre otros. Se busca en síntesis, aportar elementos que permitan, desde una perspectiva sistémica e interdisciplinaria explicar algunas de las razones por las cuales los elementos involucrados en la estructuración de la normativa de ciencia y tecnología, pueden inducir a afectaciones negativas y positivas en el quehacer científico y tecnológico.