Diplomatic history of the Panama Canal. Correspondence relating to the negotiation and application of certain treaties on the subject of the construction of an interoceanic canal, and accompanying papers.

Includes a report of the secretary of state, with papers relative to the construction of the Panama Canal.

Geometry and Optimization of Relative Arbitrage

Thesis (Ph.D.)--University of Washington, 2016-06

The determinants of the vertical boundaries of the construction firm

In the last few years, transaction cost economics has become a popular theory within the construction research community. This approach has been singularly applied as a means to explain and predict phenomena concerning the construction firm, including its vertical boundaries. However, this is at a time when the chief proponents of transaction costs are urging researchers to take a pluralistic stance in relation to the theory of the firm. The aim of this paper is to develop a pluralistic approach to the vertical boundaries of the construction firm. In order to achieve this, an integrative framework is described, based on the development of the efficient boundaries problem and the capabilities approach to vertical integration. Specifically, this framework draws on the complementary strengths of transaction cost economics and the resource-based view. It is concluded that the potential relative merits of theoretical pluralism, in terms of the vertical boundaries of the construction firm, are sufficient grounds to motivate empirical testing of the predictions associated with the integrative framework of vertical integration presented

Electrodynamic heart model construction and ECG simulation

Objectives: In this paper, we present a unified electrodynamic heart model that permits simulations of the body surface potentials generated by the heart in motion. The inclusion of motion in the heart model significantly improves the accuracy of the simulated body surface potentials and therefore also the 12-lead ECG. Methods: The key step is to construct an electromechanical heart model. The cardiac excitation propagation is simulated by an electrical heart model, and the resulting cardiac active forces are used to calculate the ventricular wall motion based on a mechanical model. The source-field point relative position changes during heart systole and diastole. These can be obtained, and then used to calculate body surface ECG based on the electrical heart-torso model. Results: An electromechanical biventricular heart model is constructed and a standard 12-lead ECG is simulated. Compared with a simulated ECG based on the static electrical heart model, the simulated ECG based on the dynamic heart model is more accordant with a clinically recorded ECG, especially for the ST segment and T wave of a V1-V6 lead ECG. For slight-degree myocardial ischemia ECG simulation, the ST segment and T wave changes can be observed from the simulated ECG based on a dynamic heart model, while the ST segment and T wave of simulated ECG based on a static heart model is almost unchanged when compared with a normal ECG. Conclusions: This study confirms the importance of the mechanical factor in the ECG simulation. The dynamic heart model could provide more accurate ECG simulation, especially for myocardial ischemia or infarction simulation, since the main ECG changes occur at the ST segment and T wave, which correspond with cardiac systole and diastole phases.

Problematising the construction of journal quality:an engagement with the mainstream

Journal ranking studies have generally adopted citation techniques or academic perceptions as the basis for assessing journal quality. They have traditionally been a source of information about potential research outlets, new journals, and an aid to developing a consensus about the relative merit of publications for promotion decisions. The aim of our research is to address specific shortcomings in the conventional literature and construct an alternative view of how we might more appropriately assess journal ‘quality’. We attempt to engage with the conventional literature by applying an approach that does not privilege either citation techniques or academic perceptions. We have adopted from Zeff (1996) an objective measure of academic journal library holdings, which Zeff describes as a ‘market test’. Our construct provides evidence of an important difference in journal holdings for the Australasian region that could significantly influence further research on journal quality. The method itself is entirely mundane but may be considered to reflect a complex of historic and more contemporary variables which impact on academic and administrative decisions, influencing the makeup of academic library holdings and providing a proxy for journal ‘quality’.

Is it all tough talking at the top? A post-structuralist analysis of the construction of gendered speaker identities of British business leaders within interview narratives

This paper uses a feminist post-structuralist approach to examine the gendered identities of a sample of British business leaders in Britain. While recent national surveys offer many material reasons why women are acutely under-represented as business leaders, the role of language is rarely addressed. This paper explores the ways in which ten senior women and men construct their sense of leadership identities through the medium of interview narratives. Drawing upon two poststructuralist models of analysis (Derrida’s 1987 theory of deconstruction and Bakhtin’s 1927/1981 concept of double-voiced discourse), the paper shows how both females and males are able to shift pragmatically between interwoven corporate discourses, which demand competing cultural allegiances from one moment to the next, allegiances constantly tested by the rapid change and uncertainty that characterise global business. While male leaders experience a relative freedom of movement between different cultural discourses, female leaders are circumscribed by negative and reductive representations of female speech and behaviour. In sum, senior women are required constantly to observe, review, police and repair their use of leadership language, which potentially undermines their confidence and authority as leaders.

Design, modeling and construction of a novel ablative fast pyrolysis reactor and product collection system

The objective of this work was to design, construct and commission a new ablative pyrolysis reactor and a high efficiency product collection system. The reactor was to have a nominal throughput of 10 kg/11r of dry biomass and be inherently scalable up to an industrial scale application of 10 tones/hr. The whole process consists of a bladed ablative pyrolysis reactor, two high efficiency cyclones for char removal and a disk and doughnut quench column combined with a wet walled electrostatic precipitator, which is directly mounted on top, for liquids collection. In order to aid design and scale-up calculations, detailed mathematical modelling was undertaken of the reaction system enabling sizes, efficiencies and operating conditions to be determined. Specifically, a modular approach was taken due to the iterative nature of some of the design methodologies, with the output from one module being the input to the next. Separate modules were developed for the determination of the biomass ablation rate, specification of the reactor capacity, cyclone design, quench column design and electrostatic precipitator design. These models enabled a rigorous design protocol to be developed capable of specifying the required reactor and product collection system size for specified biomass throughputs, operating conditions and collection efficiencies. The reactor proved capable of generating an ablation rate of 0.63 mm/s for pine wood at a temperature of 525 'DC with a relative velocity between the heated surface and reacting biomass particle of 12.1 m/s. The reactor achieved a maximum throughput of 2.3 kg/hr, which was the maximum the biomass feeder could supply. The reactor is capable of being operated at a far higher throughput but this would require a new feeder and drive motor to be purchased. Modelling showed that the reactor is capable of achieving a reactor throughput of approximately 30 kg/hr. This is an area that should be considered for the future as the reactor is currently operating well below its theoretical maximum. Calculations show that the current product collection system could operate efficiently up to a maximum feed rate of 10 kg/Fir, provided the inert gas supply was adjusted accordingly to keep the vapour residence time in the electrostatic precipitator above one second. Operation above 10 kg/hr would require some modifications to the product collection system. Eight experimental runs were documented and considered successful, more were attempted but due to equipment failure had to be abandoned. This does not detract from the fact that the reactor and product collection system design was extremely efficient. The maximum total liquid yield was 64.9 % liquid yields on a dry wood fed basis. It is considered that the liquid yield would have been higher had there been sufficient development time to overcome certain operational difficulties and if longer operating runs had been attempted to offset product losses occurring due to the difficulties in collecting all available product from a large scale collection unit. The liquids collection system was highly efficient and modeling determined a liquid collection efficiency of above 99% on a mass basis. This was validated due to the fact that a dry ice/acetone condenser and a cotton wool filter downstream of the collection unit enabled mass measurements of the amount of condensable product exiting the product collection unit. This showed that the collection efficiency was in excess of 99% on a mass basis.

(Table S1) Tie-points used in age model construction for ODP Leg 172 sites

ix Ocean Drilling Program (ODP) sites, in the Northwest Atlantic have been used to investigate kinematic and chemical changes in the "Western Boundary Undercurrent" (WBUC) during the development of full glacial conditions across the Marine Isotope Stage 5a/4 boundary (~70,000 years ago). Sortable silt mean grain size(sort s) measurements are employed to examine changes in near bottom flow speeds, together with carbon isotopes measured in benthic foraminifera and % planktic foraminiferal fragmentation as proxies for changes in water-mass chemistry. A depth transect of cores, spanning 1.8-4.6 km depth, allows changes in both the strength and depth of the WBUC to be constrained across millennial scale events. Sort s measurements reveal that the flow speed structure of the WBUC during warm intervals ("interstadials") was comparable to modern (Holocene) conditions. However, significant differences are observed during cold intervals, with higher relative flow speeds inferred for the shallow component of the WBUC (~2 km depth) during all cold "stadial" intervals (including Heinrich Stadial 6), and a substantial weakening of the deep component (~3-4 km) during full glacial conditions. Our results therefore reveal that the onset of full glacial conditions was associated with a regime shift to a shallower mode of circulation (involving Glacial North Atlantic Intermediate Water) that was quantitatively distinct from preceding cold stadial events. Furthermore, our chemical proxy data show that the physical response of the WBUC during the last glacial inception was probably coupled to basin-wide changes in the water-mass composition of the deep Northwest Atlantic.

Telenovela’s orality: from medium to a linguistic-discursive construction

Telenovela’s orality: from medium to a linguistic-discursive construction. Studies about telenovelas usually highlight their "orality". However, a literature review, specifically for Latin American telenovelas, shows that the term "orality" has been used with varying senses. In contrast with those devoted to telenovelas, literary studies have addressed the question by conceptualizing it as fictional orality. This paper takes fictional orality as a key concept to explain telenovela’s discursive peculiarities, and on that base, it distinguishes several dimensions of linguistic and discursive variation, in which such orality is being portrayed.

Acoustic absorption of hemp-lime construction

Hemp-lime concrete is a sustainable alternative to standard wall construction materials. It boasts excellent hygrothermal properties in part deriving from its porous structure. This paper investigates the acoustic properties of hemp-lime concrete, using binders developed from hydrated lime and pozzolans as well as hydraulic and cementicious binders. To assess the acoustic absorption of hemp-lime walls, as they are commonly finished in practical construction, wall sections are rendered and the resulting impact on absorption is evaluated. Hemp-concretes with lime-pozzolan binders display superior acoustic properties relative to more hydraulic binders. These are diminished when rendered, as the open surface porosity is affected, however hemp-lime construction offers the potential to meet standard and guideline targets for spaces requiring acoustic treatment.

Floating Wetlands in the Puget Lowlands: Design, Construction, and Viability

Thesis (Master's)--University of Washington, 2016-06

Design, construction, and applications of a high-resolution terahertz time-domain spectrometer

This thesis reports on the design, construction, and initial applications of a high-resolution terahertz time-domain ASOPS spectrometer. The instrument employs asynchronous optical sampling (ASOPS) between two Ti:sapphire ultrafast lasers operating at a repetition rate of approximately 80 MHz, and we thus demonstrate a THz frequency resolution approaching the limit of that repetition rate. This is an order of magnitude improvement in resolution over typical THz time-domain spectrometers. The improved resolution is important for our primary effort of collecting THz spectra for far-infrared astronomy. We report on various spectroscopic applications including the THz rotational spectrum of water, where we achieve a mean frequency error, relative to established line centers, of 27.0 MHz. We also demonstrate application of the THz system to the long-duration observation of a coherent magnon mode in a anti-ferromagnetic yttrium iron oxide (YFeO3) crystal. Furthermore, we apply the all-optical virtual delay line of ASOPS to a transient thermoreflectance experiment for quickly measuring the thermal conductivity of semiconductors.

Burrows with Chimneys of the Fiddler Crab Uca thayeri: Construction, Occurrence, and Function

Joao B. L. Gusmao-Junior, Glauco B. O. Machado, and Tania M. Costa (2012) Burrows with chimneys of the fiddler crab Uca thayeri: construction, occurrence, and function. Zoological Studies 51(5): 598-605. Building of soil structures is observed in a variety of semi-terrestrial crustaceans. In fiddler crabs (Genus Uca), this behavior occurs in several species, some of which build structures that are largely ornamental and others construct barriers that are apparently for defense. Although there is a relative abundance of studies on this type of behavior in Uca, the relationship between the social context and the occurrence of these structures remains poorly studied. Thus, this study attempted to analyze in detail the construction, occurrence, and function of mud chimneys built by the fiddler crab Uca thayeri; these sedimentary structures are possibly associated with burrow defense. Field investigations and laboratory experiments were conducted. Both sexes were often found in burrows with chimneys; however, laboratory experiments showed that only females actively built and maintained chimneys, with some difference in the morphology of these structures between sexes. The social context had little influence on the construction of chimneys, which showed that the stimulus for constructing chimneys could be endogenous. Our results suggest that burrows with chimney of U. thayeri may have functions other than defense, and may act in regulating the internal conditions of the burrow, as observed in other crustaceans with such building behavior. http://zoolstud.sinica.edu.tw/Journals/51.5/598.pdf

Trends in NE Atlantic landings (southern Portugal): identifying the relative importance of fisheries and environmental variables

Time series of commercial landings from the Algarve (southern Portugal) from 1982 to 1999 were analyzed using min/max autocorrelation factor analysis (MAFA) and dynamic factor analysis (DFA). These techniques were used to identify trends and explore the relationships between the response variables (annual landings of 12 species) and explanatory variables [sea surface temperature, rainfall, an upwelling index, Guadiana river (south-east Portugal) flow, the North Atlantic oscillation, the number of licensed fishing vessels and the number of commercial fishermen]. Landings were more highly correlated with non-lagged environmental variables and in particular with Guadiana river flow. Both techniques gave coherent results, with the most important trend being a steady decline over time. A DFA model with two explanatory variables (Guadiana river flow and number of fishermen) and three common trends (smoothing functions over time) gave good fits to 10 of the 12 species. Results of other models indicated that river flow is the more important explanatory variable in this model. Changes in the mean flow and discharge regime of the Guadiana river resulting from the construction of the Alqueva dam, completed in 2002, are therefore likely to have a significant and deleterious impact on Algarve fisheries landings.