Utilização De Polímeros à Base De Acrilamida Na Remoção De Cobre De Meio Aquoso

Environmental Laws and Regulations to dump wastewater are increasingly relevant and, together with pressure from environmentalists, provide awareness of academics in search of solutions. In Brazil, federal law, through Resolution No. 357 of 17/03/05 of the National Environmental Council - CONAMA, in Article 24 deals with the disposal of these effluents. Water pollution with heavy metals is concern because of the difficulty of the treatment and removal from the environment. Copper, for example, is a metallic element and in the form of salt is very soluble in water which dificults its removal. In this context, this study aims to evaluate the extraction of copper with acrylamide polymers through the process of assisted flocculation followed by filtration. Therefore, we used acrylamide polymers, produced by SNF Floerger, with varying degrees of ionicity which is the parameter examined on the extraction of copper. We used the FA polymers FA 920 SH, AH 912 SH, AN 905 SH, AN 910 SH, AN 923 SH, AN 945 SH, AN 956 SH and AN 977 SH, which have anionicities different from each other and growing in that order. The parameters temperature, pH, concentration of the copper solution and stirring speed are fixed. The polymer solution was added to a solution of 200 ppm copper, varying the concentration of polymer. After stirring, an assisted flocculation occurred followed by filtration of the effluent. The filtrate was analyzed by atomic absorption spectrophotometer and the percentage removal of copper ranged from 63 % to 97 %, noting that polymers with higher ionic charge were responsible for the highest percentage of copper extraction. The results of this study showed that these polymers can be applied in the treatment of wastewaters containing metals such as copper

Letramento no trânsito: eventos e práticas na formação de condutores de veículos

In the contemporary society, the language is presented in all social spaces and assumes many different purposes in order to meet the needs that emerge from each of these sphere. In traffic, this reality is not different. To guide vehicles, it is necessary to know, by means of reading artifacts, what the legislation establishes in what concerns the way to act in this domain. Thus, this works aims at describing the practices of literacy held in events of driver trainings and know the expectations generated by drivers/learners from this training. In theoretical terms, it anchors in Literacy Studies, comprehended here as social practices (BARTON; HAMILTON, 1998; KLEIMAN, 1995, 2008; MORTATTI, 2004; STREET, 1984; OLIVEIRA, 2008, 2010; ROJO, 2009; PAZ, 2008). Genre Theory (BRONCKART, 2004, 1999; OLIVEIRA, 2010) and in your multimodal instance (KRESS; VAN LEEUWEN, 1996; DIONÍSIO, 2006). In terms of methodology, it follows the bias of qualitative research, because of its ethnographic nature (BOGDAN; BIKLEN, 1994; MINAYO, 2010; CANÇADO, 1994; CHIZZOTTI, 2005). The research corpus was generated by reading the Brazilian Traffic Code, by observing the literacy events held in Drivers Training Centers of Natal, analysis of course books used in these events, plus questionnaires with open and closed questions and semistructured interviews. The collaborators are constituted of drivers in training, and instructors who work in this field. The analyses show significant contributions regarding the placement more committed of future drivers with the welfare and safety of those who use the public roads, from the practice or reading done during the traffic training. The contribution of this work lies in the possibility to expand the discussion about the language practice uses regarding the training for the traffic, more specifically, the training of drivers of vehicles

Os Polímeros como Sistemas Complexos

Neste trabalho, através de simulações computacionais, identificamos os fenômenos físicos associados ao crescimento e a dinâmica de polímeros como sistemas complexos exibindo comportamentos não linearidades, caos, criticalidade auto-organizada, entre outros. No primeiro capítulo, iniciamos com uma breve introdução onde descrevemos alguns conceitos básicos importantes ao entendimento do nosso trabalho. O capítulo 2 consiste na descrição do nosso estudo da distribuição de segmentos num polímero ramificado. Baseado em cálculos semelhantes aos usados em cadeias poliméricas lineares, utilizamos o modelo de crescimento para polímeros ramificados (Branched Polymer Growth Model - BPGM) proposto por Lucena et al., e analisamos a distribuição de probabilidade dos monômeros num polímero ramificado em 2 dimensões, até então desconhecida. No capítulo seguinte estudamos a classe de universalidade dos polímeros ramificados gerados pelo BPGM. Utilizando simulações computacionais em 3 dimensões do modelo proposto por Lucena et al., calculamos algumas dimensões críticas (dimensões fractal, mínima e química) para tentar elucidar a questão da classe de universalidade. Ainda neste Capítulo, descrevemos um novo modelo para a simulação de polímeros ramificados que foi por nós desenvolvido de modo a poupar esforço computacional. Em seguida, no capítulo 4 estudamos o comportamento caótico do crescimento de polímeros gerados pelo BPGM. Partimos de polímeros criticamente organizados e utilizamos uma técnica muito semelhante aquela usada em transições de fase em Modelos de Ising para estudar propagação de danos chamada de Distância de Hamming. Vimos que a distância de Hamming para o caso dos polímeros ramificados se comporta como uma lei de potência, indicando um caráter não-extensivo na dinâmica de crescimento. No Capítulo 5 analisamos o movimento molecular de cadeias poliméricas na presença de obstáculos e de gradientes de potenciais. Usamos um modelo generalizado de reptação para estudar a difusão de polímeros lineares em meios desordenados. Investigamos a evolução temporal destas cadeias em redes quadradas e medimos os tempos característicos de transporte t. Finalizamos esta dissertação com um capítulo contendo a conclusão geral denoss o trabalho (Capítulo 6), mais dois apêndices (Apêndices A e B) contendo a fenomenologia básica para alguns conceitos que utilizaremos ao longo desta tese (Fractais e Percolação respectivamente) e um terceiro e ´ultimo apêndice (Apêndice C) contendo uma descrição de um programa de computador para simular o crescimentos de polímeros ramificados em uma rede quadrada

Medida da preditividade de instrumentos psicológicos nas avaliações psicológicas de condutores

The object of this study was to identify the possibility of predicting the involvement in traffic infractions from the results of the psychological tests carried out by psychologists specialized in the process of driver licensing in the state of Rio Grande do Norte (RN). The proposal consisted in identifying the penalty points recorded in national driving licenses (CNH) and identifying the corresponding tests and scores obtained, verifying if the average scores in the tests of drivers with and without an infraction record were significantly different and if there is any relation between the test scores and the frequency of the infractions. The results of the psychological instruments were collected in two moments the first being in the act of acquisition of the CNH and the second being during license renewal at the only certified clinic and at the DETRAN-RN. A population of 839 drivers of 14 municipalities were identified. 127 protocols of psychological tests were identified in the records of the DETRAN-RN (2002) and 76 at the clinic (2007), pointing out failures in the process of safekeeping of the psychological material, as well as in its retrieval from the record files. The sample was thus reduced to 68 drivers, all male, with age range between 18 and 41 years old, mean of 21,72 years old (DP = 5,24). 54 drivers were identified without a record of infraction, and 14 with a record. The latter committed 29 infractions. The penalty points recorded in their CNH ranged from 0 to 35 and the typical value of points (median) was zero. In the group with a record of infractions the number of points ranged between 3 and 35, mean of 10,79 (DP = 7,73). Differences were observed in the composition of the battery of tests in the two moments with the same subjects. The use of different tests to assess the same construct of the subject, first and second moment of assessment, did not allow for some analyzes with more efficient statistical proof. It was pointed out that five tests were not carried out and 118 were not corrected/analyzed. Significant differences between the groups were not identified with the psychological instruments used. In another attempt to establish differences between the means, the application of the independent t-Test evidenced a significant difference in the scores of the instruments of concentrated attention in 2002 (t = 2,21, gl = 25, p = 0.037) and of diffuse attention in 2002 (t = 2,37, gl = 24, p = 0.026). The results also did not evidence significant correlation between the scores of the tests and the penalty points of the infractions. Based on this study, it cannot be concluded with precision that the high or low scores are good criteria to determine that a driver will commit more or less traffic infractions, nor that the drivers with higher scores in the tests commit less infractions and vice-versa. Furthermore, the problems to find the instruments and the most basic data require a stronger monitoring on the part of the certified clinic and of the DETRAN-RN.

Obtenção de polímeros graftizados de quitosana e estudo das propriedades físico-químicas para aplicação na indústria do petróleo

Chitosan is a biopolymer derived from the shells of crustaceans, biodegradable, inexpensive and renewable with important physical and chemical properties. Moreover, the different modifications possible in its chemical structure generate new properties, making it an attractive polysaccharide owing to its range of potential applications. Polymers have been used in oil production operations. However, growing concern over environmental constraints has prompted oil industry to search for environmentally sustainable materials. As such, this study sought to obtain chitosan derivatives grafted with hydrophilic (poly(ethylene glycol), mPEG) and/or hydrophobic groups (n-dodecyl) via a simple (one-pot) method and evaluate their physicochemical properties as a function of varying pH using rheology, small-angle Xray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. The chitosan derivatives were prepared using reductive alkylation under mild reaction conditions and the chemical structure of the polymers was characterized by nuclear magnetic resonance (1H NMR) and CHN elemental analysis. Considering a constant mPEG/Chitosan molar ratio on modification of chitosan, the solubility of the polymer across a wide pH range (acidic, neutral and basic) could only be improved when some of the amino groups were submitted to reacetylation using the one-pot method. Under these conditions, solubility is maintained even with the simultaneous insertion of n-dodecyl. On the other hand, the solubility of derivatives obtained only through mPEG incorporation using the traditional methodology, or with the ndodecyl group, was similar to that of its precursor. The hydrophilic group promoted decreased viscosity of the polymer solutions at 10 g/L in acid medium. However, at basic pH, both viscosity and thermal stability increased, as well as exhibited a pronounced pseudoplastic behavior, suggesting strong intermolecular associations in the alkaline medium. The SAXS results showed a polyelectrolyte behavior with the decrease in pH for the polymer systems. DLS analyses revealed that although the dilute polymer solutions at 1 g/L and pH 3 exhibited a high density of protonated amino groups along the polymer chain, the high degree of charge contributed significantly to aggregation, promoting increased particle size with the decrease in pH. Furthermore, the hydrophobic group also contributed to increasing the size of aggregates in solution at pH 3, whereas the hydrophilic group helped reduce their size across the entire pH range. Nevertheless, the nature of aggregation was dependent on the pH of the medium. Zeta potential results indicated that its values do not depend solely on the surface charge of the particle, but are also dependent on the net charge of the medium. In this study, water soluble associative polymers exhibit properties that can be of great interest in the petroleum industry

Polímeros biodegradáveis - uma solução parcial para diminuir a quantidade dos resíduos plásticos

The large use of plastics has generated a waste deposit problem. Today plastic wastes represent 20% in volume of the total waste in the municipal landfills. To solve the disposal problem of plastics methods have been employed such as incineration, recycling, landfill disposal, biodegradation and the use of biodegradable polymers. Incineration of plastic wastes provokes pollution due to the production of poisonous gases. Recycling is important to reduce final costs of plastic materials, but is not enough in face of the amount of discarded plastic. In landfills plastic wastes remain undegraded for a long time, causing space and pollution problems. Biodegradation is a feasible method to treat some plastics, but intensive research is necessary to find conditions for the action of microorganisms. All of these methods are important and the practical application of each one depends on the type and amount of the plastic wastes and the environmental conditions. Therefore, a great deal of research has focused on developing biodegradable plastics and its application because it is an important way for minimizing the effect of the large volume of plastic waste discarded in the world.

Polímeros biorreabsorvíveis como substrato para cultura de células e engenharia tecidual

Biomateriais poliméricos são desenvolvidos para uso como substitutos de tecidos danificados e/ou estimular sua regeneração. Uma classe de biomateriais poliméricos são os biorreabsorvíveis, compostos que se decompõem tanto in vitro quanto in vivo. São empregados em tecidos que necessitam de um suporte temporário para sua recomposição tecidual. Dentre os vários polímeros biorreabsorvíveis, destacam-se os alfa-hidróxi ácidos, entre eles, diferentes composições do poli(ácido lático) (PLA), como o poli(L-ácido lático) (PLLA), poli(D-ácido lático) (PDLA), poli(DL-ácido lático) (PDLLA), além do poli(ácido glicólico) (PGA) e da policaprolactona (PCL). Estes polímeros são considerados biorreabsorvíveis por apresentarem boa biocompatibilidade e os produtos de sua decomposição serem eliminados do corpo por vias metabólicas. Diversas linhas de pesquisa mostram que os diferentes substratos à base de PLA estudados não apresentam toxicidade, uma vez que as células são capazes de crescer e proliferar sobre eles. Além disso, diversos tipos de células cultivadas sobre diferentes formas de PLA são capazes de se diferenciarem sobre os diferentes polímeros e passar a produzir componentes de matriz extracelular. Neste trabalho, é revisada a utilização de substratos à base de alfa-hidróxi ácidos, com destaque para diferentes formas de PLA, utilizados como substratos para cultura de células, bem como suas aplicações.

Um modelo para condutores múltiplos considerando a distribuição da corrente nos subcondutores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atitudes de condutores de atividades de aventura e a perspectiva de disseminação da sensibilização ambiental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de filmes nanoestruturados de polianilina/látex de borracha natural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigações sobre a adesão de bactérias a polímeros tratados a plasma

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Comparacão entre polímeros de mamona(Ricinus communis)e auto-enxerto ósseo esponjoso no tratamento de defeito ósseo segmentar induzido no rádio de coelhos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de polímeros comerciais tratados a plasma em pressão atmosférica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tratamento de polímeros com jato de plasma em pressão atmosférica

Pós-graduação em Física - FEG

Estudo de propriedades elétricas em sistemas orgânicos e inorgânicos correlacionados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)