951 resultados para Organized labor
Resumo:
The self-organized growth of uniform carbon nanocone arrays using low-temperature non-equilibrium Ar + H 2 + CH 4 plasma-enhanced chemical vapor deposition (PECVD) is studied. The experiment shows that size-, shape-, and position-uniform carbon nanocone arrays can develop even from non-uniformly fragmented discontinuous nickel catalyst films. A three-stage scenario is proposed where the primary nanocones grow on large catalyst particles during the first stage, and the secondary nanocones are formed between the primary ones at the second stage. Finally, plasma-related effects lead to preferential growth of the secondary nanocones and eventually a uniform nanopattern is formed. This does not happen in a CVD process with the same gas feedstock and surface temperature. The proposed three-stage growth scenario is supported by the numerical experiment which generates nanocone arrays very similar to the experimentally synthesized nanopatterns. The self-organization process is explained in terms of re-distribution of surface and volumetric fluxes of plasma-generated species in a developing nanocone array. Our results suggest that plasma-related self-organization effects can significantly reduce the non-uniformity of carbon nanostructure arrays which commonly arises from imperfections in fragmented Ni-based catalyst films.
Resumo:
Self-assembly of size-uniform and spatially ordered quantum dot (QD) arrays is one of the major challenges in the development of the new generation of semiconducting nanoelectronic and photonic devices. Assembly of Ge QD (in the ∼5-20 nm size range) arrays from randomly generated position and size-nonuniform nanodot patterns on plasma-exposed Si (100) surfaces is studied using hybrid multiscale numerical simulations. It is shown, by properly manipulating the incoming ion/neutral flux from the plasma and the surface temperature, the uniformity of the nanodot size within the array can be improved by 34%-53%, with the best improvement achieved at low surface temperatures and high external incoming fluxes, which are intrinsic to plasma-aided processes. Using a plasma-based process also leads to an improvement (∼22% at 700 K surface temperature and 0.1 MLs incoming flux from the plasma) of the spatial order of a randomly sampled nanodot ensemble, which self-organizes to position the dots equidistantly to their neighbors within the array. Remarkable improvements in QD ordering and size uniformity can be achieved at high growth rates (a few nms) and a surface temperature as low as 600 K, which broadens the range of suitable substrates to temperature-sensitive ultrathin nanofilms and polymers. The results of this study are generic, can also be applied to nonplasma-based techniques, and as such contributes to the development of deterministic strategies of nanoassembly of self-ordered arrays of size-uniform QDs, in the size range where nanodot ordering cannot be achieved by presently available pattern delineation techniques.
Resumo:
The paper presents an investigation of self-organizational and -assembly processes of nanostructure growth on surfaces exposed to low-temperature plasmas. We have considered three main growth stages-initial, or sub-monolayer growth stage, separate nanostructure growth stage, and array growth stages with the characteristic sizes of several nm, several tens of nm, and several hundreds of nm, respectively, and have demonstrated, by the experimental data and hybrid multiscale numerical simulations, that the plasma parameters can strongly influence the surface processes and hence the kinetics of self-organization and -assembly. Our results show that plasma-controlled self-organization is a promising way to assemble large regular arrays of nanostructures. © 2008 IUPAC.
Resumo:
This work presents the details of the numerical model used in simulation of self-organization of nano-islands on solid surfaces in plasma-assisted assembly of quantum dot structures. The model includes the near-substrate non-neutral layer (plasma sheath) and a nanostructured solid deposition surface and accounts for the incoming flux of and energy of ions from the plasma, surface temperature-controlled adatom migration about the surface, adatom collisions with other adatoms and nano-islands, adatom inflow to the growing nano-islands from the plasma and from the two-dimensional vapour on the surface, and particle evaporation to the ambient space and the two-dimensional vapour. The differences in surface concentrations of adatoms in different areas within the quantum dot pattern significantly affect the self-organization of the nano-islands. The model allows one to formulate the conditions when certain islands grow, and certain ones shrink or even dissolve and relate them to the process control parameters. Surface coverage by selforganized quantum dots obtained from numerical simulation appears to be in reasonable agreement with the available experimental results.
Resumo:
An advanced inductively coupled plasma (ICP)-assisted rf magnetron sputtering deposition method is developed to synthesize regular arrays of pear-shaped ZnO nanodots on a thin SiNx buffer layer pre-deposited onto a silicon substrate. It is shown that the growth of ZnO nanodots obey the cubic root-law behavior. It is also shown that the synthesized ZnO nanodots are highly-uniform, controllable by the experimental parameters, and also feature good structural and photoluminescent properties. These results suggest that this custom-designed ICP-based technique is very effective and highly-promising for the synthesis of property- and size-controllable highly-uniform ZnO nanodots suitable for next-generation light emitting diodes, energy storage, UV nanolasers, and other applications.
Resumo:
Charge transport properties in organic semiconductors depend strongly on molecular order. Here we demonstrate field-effect transistors where drain current flows through a precisely defined array of nanostripes made of crystalline and highly ordered molecules. The molecular stripes are fabricated across the channel of the transistor by a stamp-assisted deposition of the molecular semiconductors from a solution. As the solvent evaporates, the capillary forces drive the solution to form menisci under the stamp protrusions. The solute precipitates only in the regions where the solution is confined by the menisci once the critical concentration is reached and self-organizes into molecularly ordered stripes 100-200 nm wide and a few monolayers high. The charge mobility measured along the stripes is 2 orders of magnitude larger than the values measured for spin-coated thin films.
Impact of child labor on academic performance : evidence from the program "Edúcame Primero Colombia"
Resumo:
In this study, the effects of different variables of child labor on academic performance are investigated. To this end, 3302 children participating in the child labor eradication program “Edúcame Primero Colombia” were interviewed. The interview format used for the children's enrollment into the program was a template from which socioeconomic conditions, academic performance, and child labor variables were evaluated. The academic performance factor was determined using the Analytic Hierarchy Process (AHP). The data were analyzed through a logistic regression model that took into account children who engaged in a type of labor (n = 921). The results showed that labor conditions, the number of weekly hours dedicated to work, and the presence of work scheduled in the morning negatively affected the academic performance of child laborers. These results show that the relationship between child labor and academic performance is based on the conflict between these two activities. These results do not indicate a linear and simple relationship associated with the recognition of the presence or absence of child labor. This study has implications for the formulation of policies, programs, and interventions for preventing, eradicating, and attenuating the negative effects of child labor on the social and educational development of children.
Resumo:
During the 18th and 19th centuries, prostitution came to be understood as a potentially disruptive element in the management of society. New forms of social control developed that sought to transform the souls of prostitutes to better control their bodies. Institutions for managing prostitutes, such as Magdalen Homes and lock hospitals, were introduced or increased in number throughout the British Empire, North America, and Western Europe. Often these institutions had as their stated objective the physical purification and moral reform of prostitutes, appearing to make a dramatic break with earlier methods of social control that had relied on practices of physical punishment and spatial segregation. Emergent institutions for the social control of prostitutes used a regimen of religious training, hard labor, and medical expertise. The objective of the Magdalen Home was not to punish sin but to absolve it, while the function of the lock hospital was not simply to confine the ill, but to confine the ill to "cure" them. The role of these institutions was not only symbolic, mirroring in some way the operation of earlier forms of social control, but was also practical and transformative. The mass institutionalization of prostitutes that occurred during the 18th and 19th centuries produced and emphasized sexual, class, and gender boundaries, grounded in the broad distinction between "pure" and "impure" women. Because of its association with sin, prostitution before the 18th century had been constructed as a religious problem relating to salvation and penitence. Throughout Western Europe during the Middle Ages, prostitutes, like the medieval leper and the Jew, were subject to restrictions designed to distinguish and isolate them from other members of their communities. The repression of prostitution during the Middle Ages was neither systematic nor highly organized, although it reinforced the image of the prostitute as sinful "other".
Resumo:
The monoanionic ligand 1,1,3,3 tetracyano-2 ethoxypropenide (tcnoet) is reported with its Cu(II)–bpy complex of formula [Cu2(µ-tcnoet)2(tcnoet)2(bpy)2]. The structure has been determined using X-ray diffraction and features an alternating chain with bridging tcnoet ligands. One ligand acts as a bidentate, dinucleating ligand with one short Cu–N and one medium Cu–N bond, whereas the other tcnoet is largely monodentate, albeit with a very weak interdimer Cu–N bond. Despite the arrangement in dinuclear units, further arranged into linear chains through the non-bridging tcnoet ligand, the compound shows no significant magnetic exchange, as deduced from magnetic susceptibility down to 4 K. Ligand-field, IR and EPR spectra in the solid state and in frozen solution are reported and are consistent with the overall structure.
Resumo:
We develop a dynamic overlapping generations model to highlight the role of income inequality in explaining the persistence of child labor under declining poverty. Differential investment in two forms of human capital—schooling and health—in the presence of inequality gives rise to a nonconvergent income distribution in the steady state characterized by multiple steady states of relative income with varying levels of education, health, and child labor. The child labor trap thus generated is shown to preserve itself despite rising per capita income. Policy recommendations include public provision of education targeted toward reducing schooling costs for the poor or raising the efficacy of public health infrastructure.
Resumo:
In the United States, there has been a fierce debate over the Trans-Pacific Partnership (TPP), and its impact upon jobs, employment, and labor rights and standards. This sweeping trade agreement spans the Pacific Rim, and includes such countries as Australia, New Zealand, Canada, Mexico, Peru, Chile, Malaysia, Singapore, Vietnam, Brunei, and Japan. There has been concern over the secrecy surrounding the Trans-Pacific Partnership — particularly in respect of labor rights.
Resumo:
We and others have published on the rapid manufacture of micropellet tissues, typically formed from 100-500 cells each. The micropellet geometry enhances cellular biological properties, and in many cases the micropellets can subsequently be utilized as building blocks to assemble complex macrotissues. Generally, micropellets are formed from cells alone, however when replicating matrix-rich tissues such as cartilage it would be ideal if matrix or biomaterials supplements could be incorporated directly into the micropellet during the manufacturing process. Herein we describe a method to efficiently incorporate donor cartilage matrix into tissue engineered cartilage micropellets. We lyophilized bovine cartilage matrix, and then shattered it into microscopic pieces having average dimensions < 10 μm diameter; we termed this microscopic donor matrix "cartilage dust (CD)". Using a microwell platform, we show that ~0.83 μg CD can be rapidly and efficiently incorporated into single multicellular aggregates formed from 180 bone marrow mesenchymal stem/stromal cells (MSC) each. The microwell platform enabled the rapid manufacture of thousands of replica composite micropellets, with each micropellet having a material/CD core and a cellular surface. This micropellet organization enabled the rapid bulking up of the micropellet core matrix content, and left an adhesive cellular outer surface. This morphological organization enabled the ready assembly of the composite micropellets into macroscopic tissues. Generically, this is a versatile method that enables the rapid and uniform integration of biomaterials into multicellular micropellets that can then be used as tissue building blocks. In this study, the addition of CD resulted in an approximate 8-fold volume increase in the micropellets, with the donor matrix functioning to contribute to an increase in total cartilage matrix content. Composite micropellets were readily assembled into macroscopic cartilage tissues; the incorporation of CD enhanced tissue size and matrix content, but did not enhance chondrogenic gene expression.
Resumo:
I approached the editorial prompt as an opportunity to work through some of the concerns driving my current research on creative labor in emergent or ‘peripheral’ media hubs, centers of production activity outside established media capitals that are nevertheless increasingly integrated into a global production apparatus. It builds from my research on the role that film, television and digital media production have played in the economic and cultural strategies of Glasgow, Scotland, and extends the focus on media work to other locations, including Prague and Budapest. I am particularly drawn to the spatial dynamics at play in these locations and how local producers, writers, directors and crew negotiate a sense of place and creative identity against the flows and counter-flows of capital and culture. This means not only asking questions about the growing ensemble of people, places, firms and policies that make international productions possible, but also studying the more quotidian relationships between media workers and the locations (both near and far) where they now find work. I do not see these tasks as unrelated. On the one hand, such queries underscore how international production depends on a growing constellation of interchangeable parts and is facilitated by various actors whose agendas may or may not converge. On the other hand, these questions also betray an even more complicated dynamic, a process that is shifting the spatial orientation of both location and labor around uneven and contested scales. As local industries reimagine themselves as global players, media practitioners are caught up in a new geography of creative labor: not only are personnel finding it increasingly necessary to hop from place to place to follow the work, but also place itself is changing, as locations morph into nebulous amalgamations of tax rebates, subsidized facilities, production services and (when it still matters) natural beauty.
Resumo:
We demonstrate the phenomenon of self-organized criticality (SOC) in a simple random walk model described by a random walk of a myopic ant, i.e., a walker who can see only nearest neighbors. The ant acts on the underlying lattice aiming at uniform digging, i.e., reduction of the height profile of the surface but is unaffected by the underlying lattice. In one, two, and three dimensions we have explored this model and have obtained power laws in the time intervals between consecutive events of "digging." Being a simple random walk, the power laws in space translate to power laws in time. We also study the finite size scaling of asymptotic scale invariant process as well as dynamic scaling in this system. This model differs qualitatively from the cascade models of SOC.