Characterising loss and damage from climate change

Policy-makers are creating mechanisms to help developing countries cope with loss and damage from climate change, but the negotiations are largely neglecting scientific questions about what the impacts of climate change actually are. Mitigation efforts have failed to prevent the continued increase of anthropogenic greenhouse gas (GHG) emissions. Adaptation is now unlikely to be sufficient to prevent negative impacts from current and future climate change1. In this context, vulnerable nations argue that existing frameworks to promote mitigation and adaptation are inadequate, and have called for a third international mechanism to deal with residual climate change impacts, or “loss and damage”2. In 2013, the United Nations Framework Convention on Climate Change (UNFCCC) responded to these calls and established the Warsaw International Mechanism (WIM) to address loss and damage from the impacts of climate change in developing countries3. An interim Executive Committee of party representatives has been set up, and is currently drafting a two-year workplan comprising meetings, reports, and expert groups; and aiming to enhance knowledge and understanding of loss and damage, strengthen dialogue among stakeholders, and promote enhanced action and support. Issues identified as priorities for the WIM thus far include: how to deal with non-economic losses, such as loss of life, livelihood, and cultural heritage; and linkages between loss and damage and patterns of migration and displacement2. In all this, one fundamental issue still demands our attention: which losses and damages are relevant to the WIM? What counts as loss and damage from climate change?

Sutton Common (South Yorkshire): a monument at risk in England’s wetlands

The work on the Iron Age site at Sutton Common, South Yorkshire, UK, has provided both inspiration and a testing ground for the development of English Heritage's strategy for wetlands. This paper concentrates on the non-technical aspects of the developing conservation management of the site, which includes in situ preservation of selected waterlogged remains, and summarises the main results of the Monuments at Risk in England's Wetlands project, the new strategy for which it formed the basis

Transit times – the link between hydrology and water quality at the catchment scale

In spite of trying to understand processes in the same spatial domain, the catchment hydrology and water quality scientific communities are relatively disconnected and so are their respective models. This is emphasized by an inadequate representation of transport processes, in both catchment-scale hydrological and water quality models. While many hydrological models at the catchment scale only account for pressure propagation and not for mass transfer, catchment scale water quality models are typically limited by overly simplistic representations of flow processes. With the objective of raising awareness for this issue and outlining potential ways forward we provide a non-technical overview of (1) the importance of hydrology-controlled transport through catchment systems as the link between hydrology and water quality; (2) the limitations of current generation catchment-scale hydrological and water quality models; (3) the concept of transit times as tools to quantify transport and (4) the benefits of transit time based formulations of solute transport for catchment-scale hydrological and water quality models. There is emerging evidence that an explicit formulation of transport processes, based on the concept of transit times has the potential to improve the understanding of the integrated system dynamics of catchments and to provide a stronger link between catchment-scale hydrological and water quality models.

A qualidade no serviço de advocacia empresarial: um estudo de caso

° objetivo deste estudo exploratório foi o de investigar a percepção da qualidade no serviço de advocacia empresarial. Para tanto foi realizado um estudo de caso, envolvendo uma organização de grande porte e uma sociedade de advogados que lhe presta serviços de assessoria jurídica, ambos com sede no estado do Rio de Janeiro. Os dados foram obtidos a partir de entrevistas em profundidade com profissionais de ambos os lados, tendo em vista o forte caráter de interação inerente ao serviço estudado e, também, buscando-se identificar eventuais discrepâncias relativas aos critérios de julgamento quanto à sua qualidade. Os resultados indicam que o processo de avaliação da qualidade de serviços tende a apresentar traços distintos na sociedade brasileira devido às peculiaridades de seu sistema cultural. Especificamente quanto ao serviço de advocacia empresarial, restou claro que as expectativas do cliente desempenham um papel relevante para a percepção de sua qualidade, e que fatores não técnicos, ou de natureza funcional, também possuem grande influência no processo.

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Um protocolo de comunicação multicast na camada de aplicação com Consciência de Localização

Internet applications such as media streaming, collaborative computing and massive multiplayer are on the rise,. This leads to the need for multicast communication, but unfortunately group communications support based on IP multicast has not been widely adopted due to a combination of technical and non-technical problems. Therefore, a number of different application-layer multicast schemes have been proposed in recent literature to overcome the drawbacks. In addition, these applications often behave as both providers and clients of services, being called peer-topeer applications, and where participants come and go very dynamically. Thus, servercentric architectures for membership management have well-known problems related to scalability and fault-tolerance, and even peer-to-peer traditional solutions need to have some mechanism that takes into account member's volatility. The idea of location awareness distributes the participants in the overlay network according to their proximity in the underlying network allowing a better performance. Given this context, this thesis proposes an application layer multicast protocol, called LAALM, which takes into account the actual network topology in the assembly process of the overlay network. The membership algorithm uses a new metric, IPXY, to provide location awareness through the processing of local information, and it was implemented using a distributed shared and bi-directional tree. The algorithm also has a sub-optimal heuristic to minimize the cost of membership process. The protocol has been evaluated in two ways. First, through an own simulator developed in this work, where we evaluated the quality of distribution tree by metrics such as outdegree and path length. Second, reallife scenarios were built in the ns-3 network simulator where we evaluated the network protocol performance by metrics such as stress, stretch, time to first packet and reconfiguration group time

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

A Top-Down Approach for Distribution Loss Evaluation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilizing cross-domain SOAP Web services using client-side languages in an enterprise mashup platform

Service oriented architectures (SOA) based on Simple Object Access Protocol (SOAP) Web services have attracted the attention of enterprises mainly for business-to-business integration and to create composite applications that execute business processes. An existing problem is the lack of preoccupation with non technical users due to the fact that to create a composite application to fulfill users needs, it is necessary to be in contact with IT staff. To overcome this issue, enterprises can take advantage of web 2.0, 'introducing in the development stage some technologies like mashups and some concepts like user empowerment, collaborative work and collective intelligence. Some results [3] [13] have shown how web 2.0 concepts can help non technical users to produce relative complex business processes. However, traditional enterprise requirements goes beyond typical web 2.0 solutions in several aspects: (1) traditional enterprise systems are based on heterogeneous stack of technologies that are not directly exploitable from a web-based client (where SOAP web services play an important role); (2) web browsers set some cross-domain security constraints making difficult to integrate services from diverse domains. In this paper, a contribution to two web 2.0 research projects [14] [15] partially solves the problems described: provide a way to invoke cross-domain backend services (based on SOAP technologies) directly only using clientside languages, without a need for any adaptation layer. © 2010 ACM.

Planejamento da expansão de sistemas elétricos de distribuição considerando fatores de riscos em análise econômica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A aprendizagem baseada em problemas (ABP): uma aplicação na disciplina “Gestão empresarial” do curso de Engenharia Civil

A metodologia da Aprendizagem Baseada em Problemas (ABP), diferentemente dos métodos de ensino convencionais, é uma metodologia que usa problemas para diminuir a lacuna entre a teoria e a prática no processo de aprendizagem. Além de favorecer a construção de conhecimentos, se propõe a contribuir para o desenvolvimento de algumas capacidades profissionais não técnicas, consideradas importantes para a prática do engenheiro em uma sociedade em constantes e rápidas transformações. Este trabalho, uma pesquisa-ação, buscou vivenciar e analisar a eficiência do método durante sua aplicação na disciplina “Gestão Empresarial”, ministrada a alunos do penúltimo e último semestre do Curso de Graduação em Engenharia Civil. Os dados para a análise foram coletados por meio de observação participante do professor/tutor da disciplina e de relatórios de avaliação, nos quais os alunos opinavam sobre a ABP, suas vantagens e desvantagens e seu potencial para atingir os objetivos propostos. Nos três estudos de caso realizados, apesar de aplicados em turmas diferentes, evidenciam-se através dos relatórios apresentados pelos alunos e de avaliações feitas durante todo o processo, a ocorrência tanto da aprendizagem dos conhecimentos quanto o desenvolvimento de algumas habilidades e atitudes objetivadas pela disciplina, tais como: capacidade de pesquisa, desenvolvimento de espírito empreendedor e busca de conhecimentos inovadores. De forma geral, os alunos reagiram positivamente à ABP, o que sugere sua possível utilização nos contextos estudados. A metodologia também demonstrou ser um instrumento interessante de desenvolvimento profissional para o professor/tutor, no que concerne ao aprimoramento docente.

Otimização da operação de sistemas de distribuição radiais usando um algoritmo genético especializado

Pós-graduação em Engenharia Elétrica - FEIS

Impact of Team Familiarity in the Operating Room on Surgical Complications

BACKGROUND: The quality of surgical performance depends on the technical skills of the surgical team as well as on non-technical skills, including teamwork. The present study evaluated the impact of familiarity among members of the surgical team on morbidity in patients undergoing elective open abdominal surgery. METHODS: A retrospective analysis was performed to compare the surgical outcomes of patients who underwent major abdominal operations between the first month (period I) and the last month (period II) of a 6-month period of continuous teamwork (stable dyads of one senior and one junior surgeon formed every 6 months). Of 117 patients, 59 and 58 patients underwent operations during period I and period II, respectively, between January 2010 and June 2012. Team performance was assessed via questionnaire by specialized work psychologists; in addition, intraoperative sound levels were measured. RESULTS: The incidence of overall complications was significantly higher in period I than in period II (54.2 vs. 34.5 %; P = 0.041). Postoperative complications grade <3 were significantly more frequently diagnosed in patients who had operations during period I (39.0 vs. 15.5 %; P = 0.007), whereas no between-group differences in grade ≥3 complications were found (15.3 vs. 19.0 %; P = 0.807). Concentration scores from senior surgeons were significantly higher in period II than in period I (P = 0.033). Sound levels during the middle third part of the operations were significantly higher in period I (median above the baseline 8.85 dB [range 4.5-11.3 dB] vs. 7.17 dB [5.24-9.43 dB]; P < 0.001). CONCLUSIONS: Team familiarity improves team performance and reduces morbidity in patients undergoing abdominal surgery.

Predicting dependencies using domain-based coupling

Software dependencies play a vital role in programme comprehension, change impact analysis and other software maintenance activities. Traditionally, these activities are supported by source code analysis; however, the source code is sometimes inaccessible or difficult to analyse, as in hybrid systems composed of source code in multiple languages using various paradigms (e.g. object-oriented programming and relational databases). Moreover, not all stakeholders have adequate knowledge to perform such analyses. For example, non-technical domain experts and consultants raise most maintenance requests; however, they cannot predict the cost and impact of the requested changes without the support of the developers. We propose a novel approach to predicting software dependencies by exploiting the coupling present in domain-level information. Our approach is independent of the software implementation; hence, it can be used to approximate architectural dependencies without access to the source code or the database. As such, it can be applied to hybrid systems with heterogeneous source code or legacy systems with missing source code. In addition, this approach is based solely on information visible and understandable to domain users; therefore, it can be efficiently used by domain experts without the support of software developers. We evaluate our approach with a case study on a large-scale enterprise system, in which we demonstrate how up to 65 of the source code dependencies and 77% of the database dependencies are predicted solely based on domain information.

Justification of Data Warehousing Projects

Project justification is regarded as one of the major methodological deficits in Data Warehousing practice. As reasons for applying inappropriate methods, performing incomplete evaluations, or even entirely omitting justifications, the special nature of Data Warehousing benefits and the large portion of infrastructure-related activities are stated. In this paper, the economic justification of Data Warehousing projects is analyzed, and first results from a large academiaindustry collaboration project in the field of non-technical issues of Data Warehousing are presented. As conceptual foundations, the role of the Data Warehouse system in corporate application architectures is analyzed, and the specific properties of Data Warehousing projects are discussed. Based on an applicability analysis of traditional approaches to economic IT project justification, basic steps and responsibilities for the justification of Data Warehousing projects are derived.