An example-based generator of XSLT programs

XSLT is a powerful and widely used language for transforming XML documents. However, its power and complexity can be overwhelming for novice or infrequent users, many of whom simply give up on using this language. On the other hand, many XSLT programs of practical use are simple enough to be automatically inferred from examples of source and target documents. An inferred XSLT program is seldom adequate for production usage but can be used as a skeleton of the final program, or at least as scaffolding in the process of coding it. It should be noted that the authors do not claim that XSLT programs, in general, can be inferred from examples. The aim of Vishnu—the XSLT generator engine described in this chapter—is to produce XSLT programs for processing documents similar to the given examples and with enough readability to be easily understood by a programmer not familiar with the language. The architecture of Vishnu is composed by a graphical editor and a programming engine. In this chapter, the authors focus on the editor as a GWT Web application where the programmer loads and edits document examples and pairs their content using graphical primitives. The programming engine receives the data collected by the editor and produces an XSLT program.

The dilution effect: The influence of expertise and abstraction on consumer's judgements of products

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

The Triplaria tree (Triplaris spp) and Pseudomyrmex ants: a symbiotic relationship with risks of attack for humans

The authors report a massive attack by Pseudomyrmex ants on a human who touched a Triplaria - novice tree (Triplaris spp). The ants naturally live in these trees and their stings cause intense pain and discrete to moderate local inflammation. The problem is common in some Brazilian regions and can be prevented by identifying the trees.

Cell-based computational modeling of vascular morphogenesis using Tissue Simulation Toolkit.

Computational modeling has become a widely used tool for unraveling the mechanisms of higher level cooperative cell behavior during vascular morphogenesis. However, experimenting with published simulation models or adding new assumptions to those models can be daunting for novice and even for experienced computational scientists. Here, we present a step-by-step, practical tutorial for building cell-based simulations of vascular morphogenesis using the Tissue Simulation Toolkit (TST). The TST is a freely available, open-source C++ library for developing simulations with the two-dimensional cellular Potts model, a stochastic, agent-based framework to simulate collective cell behavior. We will show the basic use of the TST to simulate and experiment with published simulations of vascular network formation. Then, we will present step-by-step instructions and explanations for building a recent simulation model of tumor angiogenesis. Demonstrated mechanisms include cell-cell adhesion, chemotaxis, cell elongation, haptotaxis, and haptokinesis.

Testing for potential contextual bias effects during the verification stage of the ACE-V methodology when conducting fingerprint comparisons

This study was conducted to assess if fingerprint specialists could be influenced by extraneous contextual information during a verification process. Participants were separated into three groups: a control group (no contextual information was given), a low bias group (minimal contextual information was given in the form of a report prompting conclusions), and a high bias group (an internationally recognized fingerprint expert provided conclusions and case information to deceive this group into believing that it was his case and conclusions). A similar experiment was later conducted with laypersons. The results showed that fingerprint experts were influenced by contextual information during fingerprint comparisons, but not towards making errors. Instead, fingerprint experts under the biasing conditions provided significantly fewer definitive and erroneous conclusions than the control group. In contrast, the novice participants were more influenced by the bias conditions and did tend to make incorrect judgments, especially when prompted towards an incorrect response by the bias prompt.

Evaluation of Virtual Reality Snowplow Simulator Training: A Literature Review, September 2006

Each winter, the Iowa Department of Transportation (Iowa DOT) maintenance operators are primarily responsible for plowing snow off federal and state roads. Drivers typically work long shifts under treacherous conditions. In addition to properly navigating the vehicle, drivers are required to operate several plowing mechanisms simultaneously, such as plow controls and salt sprayers. However, operators have few opportunities during the year to practice and refine their skills. An ideal training program would provide operators with the opportunity to practice these skills under realistic yet safe conditions, as well as provide basic training to novice or less-experienced operators. Recent technological advancements have made driving simulators a desirable training and research tool. This literature review discusses much of the recent research establishing simulator fidelity and espousing its applicability. Additionally, this report provides a summary of behavioral and eye tracking research involving driving simulators. Other research topics include comparisons between novice and expert drivers’ behavioral patterns, methods for avoiding cybersickness in virtual environments, and a synopsis of current personality measures with respect to job performance and driving performance. This literature review coincides with a study designed to examine the effectiveness of virtual reality snowplow simulator training for current maintenance operators, using the TranSim VS III truck and snowplow simulator recently purchased by the Iowa DOT.

Evaluation of Virtual Reality Snowplow Simulator Training, January 2007

Each winter, Iowa Department of Transportation (Iowa DOT) maintenance operators are responsible for plowing snow off federal and state roads in Iowa. Drivers typically work long shifts under treacherous conditions. In addition to properly navigating the vehicle, drivers are required to operate several plowing mechanisms simultaneously, such as plow controls and salt spreaders. There is little opportunity for practicing these skills in real-world situations. A virtual reality training program would provide operators with the opportunity to practice these skills under realistic yet safe conditions, as well as provide basic training to novice or less-experienced operators. In order to provide such training to snowplow operators in Iowa, the Iowa DOT purchased a snowplow simulator. The Iowa DOT commissioned a study through Iowa State University designed to (1) assess the use of this simulator as a training tool and (2) examine personality and other characteristics associated with being an experienced snowplow operator. The results of this study suggest that Iowa DOT operators of all ages and levels of experience enjoyed and seemed to benefit from virtual reality snowplow simulator training. Simulator sickness ratings were relatively low, implying that the simulator is appropriate for training a wide range of Iowa DOT operators. Many reported that simulator training was the most useful aspect of training for them.

Access to a simulator is not enough: the benefits of virtual reality training based on peer-group-derived benchmarks--a randomized controlled trial.

BACKGROUND: Virtual reality (VR) simulators are widely used to familiarize surgical novices with laparoscopy, but VR training methods differ in efficacy. In the present trial, self-controlled basic VR training (SC-training) was tested against training based on peer-group-derived benchmarks (PGD-training). METHODS: First, novice laparoscopic residents were randomized into a SC group (n = 34), and a group using PGD-benchmarks (n = 34) for basic laparoscopic training. After completing basic training, both groups performed 60 VR laparoscopic cholecystectomies for performance analysis. Primary endpoints were simulator metrics; secondary endpoints were program adherence, trainee motivation, and training efficacy. RESULTS: Altogether, 66 residents completed basic training, and 3,837 of 3,960 (96.8 %) cholecystectomies were available for analysis. Course adherence was good, with only two dropouts, both in the SC-group. The PGD-group spent more time and repetitions in basic training until the benchmarks were reached and subsequently showed better performance in the readout cholecystectomies: Median time (gallbladder extraction) showed significant differences of 520 s (IQR 354-738 s) in SC-training versus 390 s (IQR 278-536 s) in the PGD-group (p < 0.001) and 215 s (IQR 175-276 s) in experts, respectively. Path length of the right instrument also showed significant differences, again with the PGD-training group being more efficient. CONCLUSIONS: Basic VR laparoscopic training based on PGD benchmarks with external assessment is superior to SC training, resulting in higher trainee motivation and better performance in simulated laparoscopic cholecystectomies. We recommend such a basic course based on PGD benchmarks before advancing to more elaborate VR training.

Aplicación y asistente web para la gestión del catálogo de un fabricante de herramientas

Desarrollada dentro de la empresa fabricante de herramientas de corte Myfhe, S.A., esta aplicación web multilingüe cataloga el amplio programa de productos de este exportador mundial. Se presentan también una interfaz asistida (para usuarios noveles) así como otra interfaz manual (para usuarios expertos) que permiten generar el desglose de productos, el plano acotado de estos mismos ensamblados y otra información técnica una vez el usuario completa un sencillo cuestionario. De esta manera, se consigue automatizar – mejorando en tiempo y en calidad – una tarea que es imprescindible realizar siempre que se compran los productos de esta empresa y antes de la puesta en marcha de estos en el taller.

Tree and Brush Control For County Road Right-of-Way, Ocotober 2002

This manual summarizes the roadside tree and brush control methods used by all of Iowa's 99 counties. It is based on interviews conducted in Spring 2002 with county engineers, roadside managers and others. The target audience of this manual is the novice county engineer or roadside manager. Iowa law is nearly silent on roadside tree and brush control, so individual counties have been left to decide on the level of control they want to achieve and maintain. Different solutions have been developed but the goal of every county remains the same: to provide safe roads for the traveling public. Counties in eastern and southern Iowa appear to face the greatest brush control challenge. Most control efforts can be divided into two categories: mechanical and chemical. Mechanical control includes cutting tools and supporting equipment. A chain saw is the most widely used cutting tool. Tractor mounted boom mowers and brush cutters are used to prune miles of brush but have significant safety and aesthetic limitations and boom mowers are easily broken by inexperienced operators. The advent of tree shears and hydraulic thumbs offer unprecedented versatility. Bulldozers are often considered a method of last resort since they reduce large areas to bare ground. Any chipper that violently grabs brush should not be used. Chemical control is the application of herbicide to different parts of a plant: foliar spray is applied to leaves; basal bark spray is applied to the tree trunk; a cut stump treatment is applied to the cambium ring of a cut surface. There is reluctance by many to apply herbicide into the air due to drift concerns. One-third of Iowa counties do not use foliar spray. By contrast, several accepted control methods are directed toward the ground. Freshly cut stumps should be treated to prevent resprouting. Basal bark spray is highly effective in sensitive areas such as near houses. Interest in chemical control is slowly increasing as herbicides and application methods are refined. Fall burning, a third, distinctly separate technique is underused as a brush control method and can be effective if timed correctly. In all, control methods tend to reflect agricultural patterns in a county. The use of chain saws and foliar sprays tends to increase in counties where row crops predominate, and boom mowing tends to increase in counties where grassland predominates. For counties with light to moderate roadside brush, rotational maintenance is the key to effective control. The most comprehensive approach to control is to implement an integrated roadside vegetation management (IRVM) program. An IRVM program is usually directed by a Roadside Manager whose duties may be shared with another position. Funding for control programs comes from the Rural Services Basic portion of a county's budget. The average annual county brush control budget is about $76,000. That figure is thought not to include shared expenses such as fuel and buildings. Start up costs for an IRVM program are less if an existing control program is converted. In addition, IRVM budgets from three different northeastern Iowa counties are offered for comparison in this manual. The manual also includes a chapter on temporary traffic control in rural work zones, a summary of the Iowa Code as it relates to brush control, and rules on avoiding seasonal disturbance of the endangered Indiana bat. Appendices summarize survey and forest cover data, an equipment inventory, sample forms for record keeping, a sample brush control policy, a few legal opinions, a literature search, and a glossary.

In vitro activity of gentamicin-loaded bioabsorbable beads against different microorganisms

Grâce à la prophylaxie antibiotique per-opératoire, à l'amélioration des techniques chirurgicales et au flux laminaire dans les blocs opératoires le taux d'infections postopératoires a pu être diminué dans les interventions chirurgicales orthopédiques. Il stagne néanmoins à environ 0,5- 2% dans les fractures fermées ainsi que dans les interventions orthopédiques électives, et peut monter jusqu'à 30% dans les fractures ouvertes stade III. L'ostéomyelite et la pseudarthrose infectée, qui peuvent en découler, sont responsables de séjours hospitaliers prolongés, engendrent des coûts de traitement élevés, et conduisent souvent à une morbidité substantielle. Le traitement de l'ostéomyelite combine le débridement chirurgical et l'administration d'antibiotiques. Cependant l'administration systémique d'antibiotiques à hautes doses est problématique en raison de leur toxicité systémique et de leur faible pénétration dans les tissus ischémiques et nécrotiques, souvent présents dans l'ostéomyelite. Pour ces raisons, le traitement standard actuel consiste, après débridement chirurgical, en la mise en place de billes de Polyrnéthylmétacrylate (PMMA) imprégnées d'antibiotique, qui fournissent des concentrations locales élevées mais systémiques basses. Malheureusement, ces billes doivent être enlevées une fois l'infection guérie, ce qui nécessite une nouvelle intervention chirurgicale. Des systèmes de libération antibiotique alternatifs devraient non seulement guérir l'infection osseuse, mais également encourager activement la consolidation osseuse et ne pas nécessiter de nouvelle chirurgie pour leur ablation. Nous avons investigué l'activité de billes résorbables chargées en gentamicine contre différents microorganismes (Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, Candida albicans), des germes communément responsables d'infections osseuses, par microcalorimétrie, une méthode novice basée sur la mesure de la chaleur produite par des microorganismes qui se répliquent dans une culture. Des billes composées essentiellement de sulfate de calcium et chargées en gentamicine ont été incubées dans des ampoules microcalorimétriques contenant différentes concentrations du germe correspondant. Les bouillons de culture avec chaque germe et billes non-chargées ont été utilisés comme contrôle positif, le bouillon de culture avec bille chargée mais sans germe comme contrôle négatif. La production de chaleur provenant de la croissance bactérienne à 37°C a été mesurée pendant 24 heures. Les cultures ne contenant pas de billes chargées en gentamicine ont. produit des pics de chaleur équivalents à la croissance exponentielle du microorganisme correspondant en milieu riche. Par contre, les germes susceptibles à la gentamicine incubés avec les billes chargées ont complètement supprimé leur production de chaleur pendant 24 heures, démontrant ainsi l'activité antibiotique des billes chargées en gentamicine contre ces germes. Les billes résorbables chargées en gentamicine inhibent donc de façon effective la croissance des germes susceptibles sous les conditions in vitro décrites. Des études sur animaux sont maintenant nécessaires pour déterminer la cinétique d'élution et l'effet antimicrobien de la gentamicine sous conditions in vivo. Finalement des études cliniques devront démontrer que l'utilisation de ces billes est effectivement une bonne option thérapeutique dans le traitement des infections osseuses.

Typing less common ovarian tumors: A training tool based on a pattern-based algorithm applied to a set of 20 virtual slides.

Context: Ovarian tumors (OT) typing is a competency expected from pathologists, with significant clinical implications. OT however come in numerous different types, some rather rare, with the consequence of few opportunities for practice in some departments. Aim: Our aim was to design a tool for pathologists to train in less common OT typing. Method and Results: Representative slides of 20 less common OT were scanned (Nano Zoomer Digital Hamamatsu®) and the diagnostic algorithm proposed by Young and Scully applied to each case (Young RH and Scully RE, Seminars in Diagnostic Pathology 2001, 18: 161-235) to include: recognition of morphological pattern(s); shortlisting of differential diagnosis; proposition of relevant immunohistochemical markers. The next steps of this project will be: evaluation of the tool in several post-graduate training centers in Europe and Québec; improvement of its design based on evaluation results; diffusion to a larger public. Discussion: In clinical medicine, solving many cases is recognized as of utmost importance for a novice to become an expert. This project relies on the virtual slides technology to provide pathologists with a learning tool aimed at increasing their skills in OT typing. After due evaluation, this model might be extended to other uncommon tumors.

Siirtyminen C-kielestä Pythoniin ohjelmoinnin perusopetuksessa

Ohjelmointitaito on asia, jonka oppimisesta ja opettamisesta voidaan olla montaa mieltä, eikä yhtä oikeaa tapaa toteuttaa ohjelmoinnin opetusta tunnu olevan olemassa. Se on kuitenkin selvää, että jotkin menetelmät ja työkalut tuntuvat olevan parempia kuin toiset. Lukuvuoden 2005-2006 päätteeksi Lappeenrannan teknillinen yliopisto päätti päivittää ohjelmoinnin perusopetusta, ja kokeili siirtymistä Python-ohjelmointikieleen ohjelmoinnin alkeiskursseilla. Koska kurssin varsinaiset muutokset keskittyivät tekniseen infrastruktuuriin, tutustuttiin alustavassa kirjallisuustutkimuksessa ensin erilaisiin lähestymistapoihin,aiempiin tapauksiin sekä mielekkäiden työkalujen löytämiseen. Tässä diplomityössä perehdytään ohjelmoinnin opetuksen työkaluihin sekä erityisesti Python-ohjelmointikielen hyödyntämiseen ohjelmoinnin perusopetuksessa. Diplomityö esittelee useita lähestymistapoja sekä keskittyy tutkimaan Pythonin soveltuvuutta alkeisopetuksen käyttötarkoituksiin. Diplomityö tutustuu myös Lappeenrannassa järjestetyn ohjelmoinnin perusteiden kurssin tuloksiin, ja analysoi sitä, pystyikö Python-pohjainen kurssi toteuttamaan teknisen yliopiston sille asettamat vaatimukset. Lopuksi aineistosta analysoidaan jatkotutkimuksen tarpeita sekä pyritään löytämään ne osa-alueet, joita näissä jatkotutkimuksissa tulisi vielä kehittää.

Exploration of the visual system: Part 1: Dissection of the mouse eye for RNA, protein, and histological analyses

Due to the power of genetics, the mouse has become a widely used animal model in vision research. However, its eyeball has an axial length of only about 2 mm. The present protocol describes how to easily dissect the small rodent eye post mortem. This allows collecting different tissues of the eye, i.e., cornea, lens, iris, retina, optic nerve, retinal pigment epithelium (RPE), and sclera. We further describe in detail how to process these eye samples in order to obtain high‐quality RNA for RNA expression profiling studies. Depending on the eye tissue to be analyzed, we present appropriate lysis buffers to prepare total protein lysates for immunoblot and immuno‐precipitation analyses. Fixation, inclusion, embedding, and cryosectioning of the globe for routine histological analyses (HE staining, DAPI staining, immunohistochemistry, in situ hybridization) is further presented. These basic protocols should allow novice investigators to obtain eye tissue samples rapidly for their experiments.

Pientalon asiakaskeskeisenLVI-teknisen laatusuunnittelujärjestelmän kehittäminen

Tämä opinnäytetyö on tehty SkinnAir Oy:lle, ja se käsittelee pientalojen LVI-teknistä suunnittelua pienen suunnitteluyrityksen näkökulmasta. Nykyinen kiivas rakentamistyyli, kasvaneet asumisviihtyvyydenvaatimukset, asennusammattilaisten puute sekä jatkuvasti kohoavat vaatimukset rakennusten energiatehokkuuden parantamiseksi vaativat yhä parempia ja laadukkaampia suunnitelmia pientalojen LVI-teknisten ratkaisujen toteuttamiseksi. Suunnittelusta saatavan heikon tuottavuuden johdosta monet suunnittelutoimistot eivät ole kiinnostuneita pientalojen LVI-suunnittelusta. Tässä työssä pyritään etsimään niitä menetelmiä, joilla erityisesti pieni suunnitteluyritys kykenee parantamaankannattavuuttaan ja nostamaan palvelun laatua kyseisellä suunnittelun osa-alueella. Työ on toteutettu perehtymällä yksityiskohtaisesti suunnitteluprosessin eri vaiheisiin sekä analysoimalla näistä vaiheista saadut tulokset Työssä tunnistetaan erilaiset asiakastyypit sekä heidän tarpeensa. Asiakastarpeiden perusteellasaadaan määritettyä oikeat lähtötiedot kohteen LVI-suunnittelua varten. Työn keskeinen osa on suunnitteluprosessin etenemisen sekä suunnittelutyöhön kuuluvien tehtävien tarkastelu. Tämän tarkastelun avulla pyritään löytämään keinot, joillakyetään tehostamaan suunnitteluprosessin eri vaiheisiin liittyviä toimintoja, parantamaan palvelun laatua sekä lisäksi minimoimaan suunnitteluprosessin aikaisia kustannuksia yrityksen kannattavuuden parantamiseksi. LVI-suunnittelutyön eteneminen painottuu asiakas- ja lähtötietojen keräämiseen sekä eri välivaiheiden hyväksyttämiseen tilaajalla. Suunnittelutyöhön vaikuttavat tekijät saadaan selville jatkuvassa, ennalta hyvin aikataulutetussa asiakaskontaktissa. Asiakkaan huomioiminen suunnitteluprosessin eri vaiheissa parantaa kokonaisvaltaista asiakaspalvelua. Näin asiakkaan saama vastine rahoilleen kasvaa. Suunnittelijan kannalta turhat muutostyöt vähenevät, koska asiakas on selvillä suunnittelutyön etenemisestä. Johtopäätöksenä voidaan todeta, että hyvän suunnitteluprosessin edellytyksenä on yksityiskohtaisten lähdetietojen käyttö. Työn tuloksena ilmeni, että valmiiden, ennalta hyvin laadittujen lomakkeiden käyttäminen parantaa selkeästi suunnittelutyön tehokkuutta. Lopputuloksena syntyi jatkokehittelyä vaativa lomakepohja asiakastarpeisiin perustuvalle lähtötietolomakkeelle. Lisäksi yrityksen käyttöön on tarkoitus laatia tarvittavat tietokannat sekä valmiit asennuspiirrokset. Lopullinen tavoite on rakentaa tässä työssä kuvatuista menetelmistä kattava tietotekninen järjestelmä parantamaan sekä yrityksen kannattavuutta että suunnittelutyön laatua. Lisäksi voidaan todeta, että rakennettava järjestelmä mahdollistaa myös vaativan suunnittelutyön tuotteistamisen.