Evaluation and Minimization of Low-Order Harmonic Torque in Low-Switching-Frequency Inverter-Fed Induction Motor Drives

A low-order harmonic pulsating torque is a major concern in high-power drives, high-speed drives, and motor drives operating in an overmodulation region. This paper attempts to minimize the low-order harmonic torques in induction motor drives, operated at a low pulse number (i.e., a low ratio of switching frequency to fundamental frequency), through a frequency domain (FD) approach as well as a synchronous reference frame (SRF) based approach. This paper first investigates FD-based approximate elimination of harmonic torque as suggested by classical works. This is then extended into a procedure for minimization of low-order pulsating torque components in the FD, which is independent of machine parameters and mechanical load. Furthermore, an SRF-based optimal pulse width modulation (PWM) method is proposed to minimize the low-order harmonic torques, considering the motor parameters and load torque. The two optimal methods are evaluated and compared with sine-triangle (ST) PWM and selective harmonic elimination (SHE) PWM through simulations and experimental studies on a 3.7-kW induction motor drive. The SRF-based optimal PWM results in marginally better performance than the FD-based one. However, the selection of optimal switching angle for any modulation index (M) takes much longer in case of SRF than in case of the FD-based approach. The FD-based optimal solutions can be used as good starting solutions and/or to reasonably restrict the search space for optimal solutions in the SRF-based approach. Both of the FD-based and SRF-based optimal PWM methods reduce the low-order pulsating torque significantly, compared to ST PWM and SHE PWM, as shown by the simulation and experimental results.

The temperature dependence of effective thermal conductivity of open-celled steel alloy foams

The effective thermal conductivity of steel alloy FeCrAlY (Fe-20 wt.% Cr-5 wt.% Al-2 wt.% Y-20 wt.%) foams with a range of pore sizes and porosities was measured between 300 and 800 K, under both vacuum and atmospheric conditions. The results show that the effective thermal conductivity increases rapidly as temperature is increased, particularly in the higher temperature range (500-800 K) where the transport of heat is dominated by thermal radiation. The effective conductivity at temperature 800 K can be three times higher than that at room temperature (300 K). Results obtained under vacuum conditions reveal that the effective conductivity increases with increasing pore size or decreasing porosity. The contribution of natural convection to heat conduction was found to be significant, with the effective thermal conductivity at ambient pressure twice the value of vacuum condition. The results also show that natural convection in metal foams is strongly dependent upon porosity. © 2003 Elsevier B.V. All rights reserved.

First-passage failure and its feedback minimization of quasi-partially integrable Hamiltonian systems

An n degree-of-freedom Hamiltonian system with r (1¡r¡n) independent 0rst integrals which are in involution is calledpartially integrable Hamiltonian system. A partially integrable Hamiltonian system subject to light dampings andweak stochastic excitations is called quasi-partially integrable Hamiltonian system. In the present paper, the procedures for studying the 0rst-passage failure and its feedback minimization of quasi-partially integrable Hamiltonian systems are proposed. First, the stochastic averaging methodfor quasi-partially integrable Hamiltonian systems is brie4y reviewed. Then, basedon the averagedIt ˆo equations, a backwardKolmogorov equation governing the conditional reliability function, a set of generalized Pontryagin equations governing the conditional moments of 0rst-passage time and their boundary and initial conditions are established. After that, the dynamical programming equations and their associated boundary and 0nal time conditions for the control problems of maximization of reliability andof maximization of mean 0rst-passage time are formulated. The relationship between the backwardKolmogorov equation andthe dynamical programming equation for reliability maximization, andthat between the Pontryagin equation andthe dynamical programming equation for maximization of mean 0rst-passage time are discussed. Finally, an example is worked out to illustrate the proposed procedures and the e9ectiveness of feedback control in reducing 0rst-passage failure.

Complete solution of the columbus problem for large-disturbance cases

The Columbus problem has been rigorously solved by Lyapunov's direct approach to the continuous system in gencral cases of large disturbance and the theory has proved to be in strict consistency with Kelvin's experiments.

The Stability of the Roommate Problem Revisited

The lack of stability in some matching problems suggests that alternative solution concepts to the core might be applied to find predictable matchings. We propose the absorbing sets as a solution for the class of roommate problems with strict preferences. This solution, which always exists, either gives the matchings in the core or predicts some other matchings when the core is empty. Furthermore, it satisfies an interesting property of outer stability. We also characterize the absorbing sets, determine their number and, in case of multiplicity, we find that they all share a similar structure.

Analysis of micro-indentation problem of a soft film on a hard substrate

Two stages have been observed in micro-indentation experiment of a soft film on a hard substrate. In the first stage, the hardness of the thin film decreases with increasing depth of indentation when indentation is shallow; and in the second stage, the hardness of the film increases with increasing depth of indentation when the indenter tip approaches the hard substrate. In this paper, the new strain gradient theory is used to analyze the micro-indentation behavior of a soft film on a hard substrate. Meanwhile, the classic plastic theory is also applied to investigating the problem. Comparing two theoretical results with the experiment data, one can find that the strain gradient theory can describe the experiment data at both the shallow and deep indentation depths quite well, while the classic theory can't explain the experiment results.

Sustainability of Open Access Services - Phases 1 & 2

Although some services that support Open Access have developed a sustainable business model, many started as projects and continue to run on recurrent project funding or goodwill. If these are critical components of the evolving scholarly communication system the foundation of Open Access is vulnerable. Knowledge Exchange has commissioned this study as part of a larger programme of work to look at the issue of sustaining key services into the long term. This report focuses on phases one and two of the programme. Phase one was a scoping exercise, carried out mainly through a literature review and an extensive stakeholder interview exercise, to describe the services that are currently available or would be valuable in the future. It also investigated what roles stakeholders could play in this future scenario. Phase two was a stakeholder consultation and engagement exercise. The aim was to engage stakeholders with the work programme so that they could contribute their views, get involved with the work and have a voice in the thinking about future scenarios. The key services are presented for three future scenarios: ‘Gold’ Open Access, fully ‘Green’ Open Access and Green’ Open Access supplementing subscription access as ‘Gold’ OA grows. Three strategic areas are identified as having particular potential for future work. These are embedding business development expertise into service development; consideration of how to move money around the system to enable Open Access to be achieved optimally; and governance and coordination of the infrastructural foundation of Open Access. The report concludes with seven recommendations, both high-level and practical, for further work around these strategic areas.

SUSTAINABILITY OF OPEN ACCESS SERVICES: Phase 3: The Collective Provision of Open Access Resources

The report ‘Sustainability of Open Access Services - Phase 3: The Collective Provision of Open Access Resources’ discusses the economic and institutional issues faced by those sustaining free infrastructure services. It also identifies strategies to coordinate the collective provision of infrastructure services. These considerations are valuable input for the phases 4 and 5 of the project ‘Sustainability of Open Access Services’. This body of work will lead to practical recommendations for funders and project planners to consider when initiating an infrastructure service. The report was written by Raym Crow and funded by SPARC. Several key messages from the report are of interest. Providing infrastructure services as a public good imposes specific requirements on the design of the sustainability model. The challenge is to get enough institutions to reveal their demand for the service and support this. Arguments for an institution to support can be altruism or reciprocity or there being sufficient benefit to the institution for supporting a service. Institutions can also work together on a service through collective action (collecting voluntary contributions) and cross subsidies (funding collected by offering exclusive benefits to contributors).

Review of Open Access Policy Dependencies

Knowledge Exchange analysed the extent to which OA policies are dependent on a number of non-commercial, compliance-enabling services used by researchers and institutions. This work offers clear evidence to policy makers on the importance of a number of non-commercial services to the successful implementation of OA policies. It also shows that many of these services are at risk and warrant further support in financial and/or governance terms. The summary report (available here) includes an analysis of a wide range of OA services and policies currently in use and presents: • an analysis of the common elements found in the current OA policies adopted by research funders and institutions • a set of case studies that illustrate the direct or indirect dependency of OA policies on key services • the views of stakeholders on the key services that enable compliance with OA policies • use cases, presented in accessible formats and language for a non-technical audience • a set of priorities for action if OA policies are to be successfully implemented