Methodological assessment of HCC literature.

Despite the fact that the hepatocellular carcinoma (HCC) represents a major health problem, very few interventions are available for this disease, and only sorafenib is approved for the treatment of advanced disease. Of note, only very few interventions have been thoroughly evaluated over time for HCC patients compared with several hundreds in other, equally highly lethal, tumours. Additionally, clinical trials in HCC have often been questioned for poor design and methodological issues. As a consequence, a gap between what is measured in clinical trials and what clinicians have to face in daily practice often occurs. As a result of this scenario, even the most recent guidelines for treatment of HCC patients use low strength evidence to make recommendations. In this review, we will discuss some of the potential methodological issues hindering a rational development of new treatments for HCC patients.

Pre-analytical and methodological challenges in red blood cell microparticle proteomics.

Microparticles are phospholipid vesicles shed mostly in biological fluids, such as blood or urine, by various types of cells, such as red blood cells (RBCs), platelets, lymphocytes, endothelial cells. These microparticles contain a subset of the proteome of their parent cell, and their ready availability in biological fluid has raised strong interest in their study, as they might be markers of cell damage. However, their small size as well as their particular physico-chemical properties makes them hard to detect, size, count and study by proteome analysis. In this review, we report the pre-analytical and methodological caveats that we have faced in our own research about red blood cell microparticles in the context of transfusion science, as well as examples from the literature on the proteomics of various kinds of microparticles.

The Georgian adolescent health survey: methodological and strategic issues.

OBJECTIVES: To conduct a national survey on adolescent health and lifestyles in Georgia and to thus set up a database on adolescent. METHODS: A two-stage cluster sample of around 8000-10000 in-school 15-18 years adolescents are being reached through a random selection of classes in Georgia. The sample has been stratified by age, region, type of school and language. A self-administered questionnaire of 87 questions has been developed and translated into the four main languages used in Georgia. RESULTS: Up to June 2004, the researchers have reached 511 classes (9306 pupils). In total, 8039 questionnaires have been considered valid. The main concerns encountered for this survey are linked with acceptance of the survey, cross-cultural issues, political and strategic problems as well as inadequate physical environmental support. CONCLUSION: Despite Georgia's unfavourable economical and political situation, it has been possible to run a national survey on the health of adolescents, according to the usual standards used in the field. This survey should allow for 1) the identification of priorities in the field of health care and health promotion 2) the monitoring of adolescent health in the future.

Design of homogeneous territorial units : a methodological proposal

One of the main questions to solve when analysing geographically added information consists of the design of territorial units adjusted to the objectives of the study. This is related with the reduction of the effects of the Modificable Areal Unit Problem (MAUP). In this paper an optimisation model to solve regionalisation problems is proposed. This model seeks to reduce disadvantages found in previous works about automated regionalisation tools

On the use of IRMS in forensic science: proposals for a methodological approach

The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensic science denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstrated its potential to distinguish chemically identical compounds coming from different sources. Despite the numerous applications of IRMS to a wide range of forensic materials, its implementation in a forensic framework is less straightforward than it appears. In addition, each laboratory has developed its own strategy of analysis on calibration, sequence design, standards utilisation and data treatment without a clear consensus.Through the experience acquired from research undertaken in different forensic fields, we propose a methodological framework of the whole process using IRMS methods. We emphasize the importance of considering isotopic results as part of a whole approach, when applying this technology to a particular forensic issue. The process is divided into six different steps, which should be considered for a thoughtful and relevant application. The dissection of this process into fundamental steps, further detailed, enables a better understanding of the essential, though not exhaustive, factors that have to be considered in order to obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratory comparisons.

Design of homogeneous territorial units : a methodological proposal

One of the main questions to solve when analysing geographically added information consists of the design of territorial units adjusted to the objectives of the study. This is related with the reduction of the effects of the Modificable Areal Unit Problem (MAUP). In this paper an optimisation model to solve regionalisation problems is proposed. This model seeks to reduce disadvantages found in previous works about automated regionalisation tools

Quantification of the least limiting water range in an oxisol using two methodological strategies

The least limiting water range (LLWR) has been used as an indicator of soil physical quality as it represents, in a single parameter, the soil physical properties directly linked to plant growth, with the exception of temperature. The usual procedure for obtaining the LLWR involves determination of the water retention curve (WRC) and the soil resistance to penetration curve (SRC) in soil samples with undisturbed structure in the laboratory. Determination of the WRC and SRC using field measurements (in situ ) is preferable, but requires appropriate instrumentation. The objective of this study was to determine the LLWR from the data collected for determination of WRC and SRC in situ using portable electronic instruments, and to compare those determinations with the ones made in the laboratory. Samples were taken from the 0.0-0.1 m layer of a Latossolo Vermelho distrófico (Oxisol). Two methods were used for quantification of the LLWR: the traditional, with measurements made in soil samples with undisturbed structure; and in situ , with measurements of water content (θ), soil water potential (Ψ), and soil resistance to penetration (SR) through the use of sensors. The in situ measurements of θ, Ψ and SR were taken over a period of four days of soil drying. At the same time, samples with undisturbed structure were collected for determination of bulk density (BD). Due to the limitations of measurement of Ψ by tensiometer, additional determinations of θ were made with a psychrometer (in the laboratory) at the Ψ of -1500 kPa. The results show that it is possible to determine the LLWR by the θ, Ψ and SR measurements using the suggested approach and instrumentation. The quality of fit of the SRC was similar in both strategies. In contrast, the θ and Ψ in situ measurements, associated with those measured with a psychrometer, produced a better WRC description. The estimates of the LLWR were similar in both methodological strategies. The quantification of LLWR in situ can be achieved in 10 % of the time required for the traditional method.

Social reciprocity measures based on dyadic discrepancies: Methodological review and software development

This paper examines statistical analysis of social reciprocity at group, dyadic, and individual levels. Given that testing statistical hypotheses regarding social reciprocity can be also of interest, a statistical procedure based on Monte Carlo sampling has been developed and implemented in R in order to allow social researchers to describe groups and make statistical decisions.

Stroke mortality in the Seychelles: methodological issues.

Comment on: Johnston SC, Mendis S, Mathers CD. Global variation in stroke burden and mortality: estimates from monitoring, surveillance, and modelling. Lancet Neurol. 2009 Apr;8(4):345-54. PMID: 19233730

Methodological adaptation for nematodes extration in forest soils of the southern Mata Atlântica

The objective of this work was to clarify whether the method to extract nematodes from European soils is suitable for forest soils and litter in the eastern of Paraná state, Brazil, and whether nematode abundance differs between sites with different ecosystems and levels of human interference. The study sites were situated in the coastal area of the Serra do Mar, near the town of Antonina, in Eastern Paraná, Brazil. Cobb's sieving and decanting method was more appropriate than ISO method, since extraction efficiency was higher and intra-sample variability was significantly lower. In order to achieve an extraction efficiency higher than 90%, Cobb's method was modified. For the extraction of nematodes from litter, the Baermann funnel, with an extraction time of 48 hours, yielded an extraction efficiency higher than 90%. Nematode abundance in litter was higher than in soil. The mean number of individuals extracted from the litter increased with the age stage of the forest sites sampled, and there was no difference in the number of individuals in the soil of the four forest sites. Mean nematode abundance in soil in banana plantations was about twice as high compared to the banana-palmito mixed stands and to the forest sites.

A methodological approach to identify teacher's ICT competencies in online learning environments in Higher Education

Aquest article pretén descriure el procés metodològic d'identificació i mesurament de les competències TIC dels professors i com a formadors en les TIC en un entorn d'aprenentatge en línia en l'Educació Superior portat a terme en el marc del Projecte Europeu Elene-TLC.La revisió de la recerca en les competències en línia del professor demostra que, en primer lloc, el mètode més utilitzat per a identificar aquestes competències és el focus group. En segon lloc, la tècnica Delphi és la tècnica més utilitzada per reunir el consens d'experts sobre quines són les competències principals per al professor en línia entre els que s'indiquen.La proposta metodològica descrita en aquest document consisteix en la creació de 7 grups de discussió en línia, l'objectiu dels quals era identificar les competències formatives dels professors en línia i les dels professos en línia. La llista de competències obtingudes posteriorment es va oferir als experts europeus que participaven en l'aplicació de la tècnica Delphi. A aquests experts se'ls va demanar que ordenessin les competències d'acord amb el seu grau d'importància.Els resultats mostren que els grups de discussió en línia i el mètode Delphi són les metodologies apropiades per a identificar les competències TIC dels professors universitaris en els entorns d'aprenentatge en línia.

On the use of IRMS in forensic science: proposals for a methodological approach

The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensicscience denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstratedits potential to distinguish chemically identical compounds coming from different sources. Despite thenumerous applications of IRMS to a wide range of forensic materials, its implementation in a forensicframework is less straightforward than it appears. In addition, each laboratory has developed its ownstrategy of analysis on calibration, sequence design, standards utilisation and data treatment without aclear consensus.Through the experience acquired from research undertaken in different forensic fields, we propose amethodological framework of the whole process using IRMS methods. We emphasize the importance ofconsidering isotopic results as part of a whole approach, when applying this technology to a particularforensic issue. The process is divided into six different steps, which should be considered for a thoughtfuland relevant application. The dissection of this process into fundamental steps, further detailed, enablesa better understanding of the essential, though not exhaustive, factors that have to be considered in orderto obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratorycomparisons.