Avaliação do efeito ambiental nas propriedades mecânicas e viscoelásticas de compósitos híbridos de titânio/fibra de carbono/resina epóxi

Hybrid composites combining metal plates and laminates with continuous fiber reinforced polymer, called fiber-metal (CHMF), have been particularly attractive for aerospace applications, due mainly to their high mechanical strength and stiffness associated with low density. These laminates (CHMF) consist of a sandwich structure consisting of layers of polymer composites and metal plates, stacked alternately. This setting allows you to combine the best mechanical performance of polymer composites reinforced with long fibers, to the high toughness of metals. Environmental effects should always be considered in the design of structural components, because these materials in applications are submitted to the effects of moisture in the atmosphere, the large cyclical variations of temperature around 82 ° C to -56 ° C, and high effort mechanical. The specimens of fibermetal composite were prepared at EMBRAER with titanium plates and laminates of carbon fiber/epoxy resin. This study aims to evaluate the effect of different environmental conditions (water immersion, hygrothermal chamber and thermal shock) of laminate hybrid titanium/carbon fiber/epoxy resin. The effects of conditioning were evaluated by interlaminar shear tests - ILSS, tensile, and vibration free

Diagnóstico ambiental do Córrego Bandeirantes, município de Rio Claro, SP: parâmetros biológicos e metais-traço

This study was conducted to verify water quality and environmental impacts related to the occupation of the watershed of the Bandeirantes stream, located in Rio Claro, SP. The intention is to propose measures to enable the mitigation of negative impacts, and boosting the recovery and maintenance of the quality of water resources, preventing its complete degradation. Water analysis were performed at three different points, east, crossing the Ring Road (dirt road) and near the confluence with the Ribeirão Claro. The results indicated significant degradation of water, especially after the crossing, where it witnessed the accumulation of solid waste and easy access to the stream, both for animals as for people, due to limited riparian it. Another impact was observed the current construction of the Forum of Rio Claro in the right side of the stream studied, causing change in the landscape, change the flow properties and removal of existing vegetation at the site of work, defined as an environmentally protected area, as determined by existing law. Measures such as: restoration of riparian zones, effluent treatment, planned urban growth and environmental education of the population, would be essential to mitigate the environmental impacts of watershed Bandeirantes stream

Estudo das alterações das propriedades mecânicas em aço A-516 grau 70 soldado e submetido a tratamento térmico de alívio de tensões

Pressure vessels are equipments that require a great care because of their high cost and human life risk in case of fail, and its fabrication methods are different for each manufacturer. Normally, pressure vessels and its parts are fabricated by welding, which may change local properties of metals. The head of a pressure vessel is a very important structural component and it is fabricated by welding and mechanical conformation. Because its excellent mechanical properties, de steel A-516 Grade 70 is often used in manufacturing of large pressure vessels that are subjected to high pressure and temperature, but was verified that its mechanical resistance is decreased when submitted to a tension relief heat treatment. By experience it was defined that before mechanical conformation of the head of a large pressure vessel, the steel should be submitted to a stress relief heat treatment in order to facilitate the mechanical conformation, but there is no quantitative analysis to prove this method and study its possible risks. In the present work the steel A-516 Grade 70 demonstrated a decrease of its mechanical resistance when submitted to a stress relief heat treatment, but keeping above the minimum limit defined in the literature. By other side its ductility was substantially increased, being possible to deduce that the stress relief heat treatment before mechanical conformation is a viable e recommended technique, but with reservations. With the data acquired during the fabrication e preparation of the specimen and the result of the tests, it was possible to elaborate a welding procedure that provides the same results obtained in this present work

Propriedades luminescentes de polioxometalato contendo európio(III) correlacionadas à sua conformação em sólido estendido e em filmes auto-organizados de Langmuir e Langmuir-Blodgett

Pós-graduação em Química - IQ

Influência de elementos terras raras nas propriedades catalíticas de óxidos derivados de hidrotalcitas para produção de biodiesel etílico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Síntese, estrutura e propriedades de polímeros de coordenação à base de íons lantanídeos e ácidos benzenodicarboxílicos

Metal Organic Frameworks (MOFs) are hybrids materials, often crystalline, consisting of metal or metal clusters, connected by polytopic organic ligands repetitively, leading to structures, usually porous. In this work, MOFs based on lanthanide ions (La3+ and Gd3+) and dicarboxylate type of ligands (isophthalic and terephthalic acids), were synthesized by hydrothermal, solvothermal and hydro(solvo)thermal methods. The effects of the synthetic route as well as the type of heating, conventional or by microwave, on the structure and properties of MOFs were studied. The powder samples obtained were characterized by X-ray diffraction, infrared spectroscopy, thermal analysis and scanning electron microscopy. The results suggest that the addition of an organic or inorganic base is needed to promote the deprotonation of the ligand, since in the samples prepared by the hydrothermal method, without the use of a base, no formation of the metalorganic framework was observed. On the other hand, the presence of DMF as solvent or cosolvent, afforded the deprotonation of the ligand with the consequent formation of MOFs. At least two different crystalline structures were identified for the samples prepared with terephthalic acid. These samples are isostructural with those reported for phases Eu(1,3-BDC)DMF, Eu2(1,4-BDC)3 (DMF)2 and Tb(1,4-BDC)H2O. The presence of water in the reaction medium in the hydro(solvo)thermal method, provoked the growth of the structure different from that observed in the absence of water. This can be explained by the difference in the coordination mode of water and DMF to lanthanide ions. Although not identified by XRD, the samples prepared with isophthalic acid, also present metalorganic structures, which was confirmed by the presence of the characteristic displacement of the carbonyl group band in their infrared spectra, compared to the spectrum of the pure ligand. This shift was also observed in the samples prepared with terephthalic acid. Thermal analisys shows that the metal organic frameworks do not collapse occurs at a temperature below 430°C.The analysis of scanning electron microscopy suggests that the morphology of powders is highly dependent on the type of heating used, conventional or by microwave.

Distribuição dos metais nas poeiras colhidas em Estarreja: estudo da mobilidade e impacto potencial dos metais no ambiente

As poeiras urbanas, vulgarmente designadas na literatura por street dusts ou road dusts, são misturas heterogêneas de partículas minerais do solo e partículas resultantes do tráfego, formando um material com características únicas e específicas de cada local. Estas partículas, geralmente enriquecidas com elementos potencialmente tóxicos, quando inaladas ou ingeridas poderão ser um risco para a saúde das populações. Neste trabalho foram recolhidas 21 amostras de poeiras urbanas na cidade de Estarreja assim como amostras representativas de partículas relacionados com o tráfego (poeiras resultante do desgaste dos travões e das marcações dos pavimentos e estradas) com o objetivo de investigar a contribuição relativa destas partículas no comportamento geoquímico dessas amostras e o risco associado para as populações locais. Para a concretização do objetivo proposto caracterizou-se química e mineralogicamente as amostras de poeiras urbanas e as partículas relacionadas com o tráfego e avaliou-se a disponibilidade e bioacessibilidade para três elementos considerados potencialmente tóxicos (Cu, Pb e Zn) usando uma combinação de ensaios: (a) digestão ácida; (b) extração sequencial para identificar o fracionamento do Cu, Pb e Zn nas diferentes fases-suporte dos metais, e (c) bioaccessibilidade oral in vitro. Os resultados da análise química mostram que as poeiras dos travões apresentam concentrações elevadas em Fe, Cu, Zn, Mn, Ba, Sb, Cr e Ni sendo de referir diferenças composicionais significativas entre as amostras estudadas. A amostra de tinta contém teores elevados de Ba, Ca, Ti e Pb e também pode conter outros elementos tais como Co, Cr, Cu, Mn. Mineralogicamente constata-se que as amostras de poeiras dos travões tem uma composição mineralógica semelhante mostrando que são constituídas por uma elevada percentagem de material de baixa cristalinidade, grafite e óxidos/hidróxidos de Fe amorfos. A amostra de tinta de marcação dos pavimentos das estradas é composta por material mais cristalino do que a poeira dos travões e é essencialmente constituída por carbonatos (maioritariamente dolomite) e também por barite (em menor quantidade). Os resultados obtidos nas amostras de poeiras urbanas indicam a existência de associações de elementos que definem claramente a componente geogénica e/ou antropogénica e apontam para diferenças entre essas associações nas duas frações estudadas (250 m e 63 m). A heterogeneidade das poeiras é revelada pela existência de partículas com origem geogénica (por exemplo quartzo e aluminossilicatos), de partículas com características marcadamente antropogénicas (partículas enriquecidas em Fe, Pb, Zn e Cu) ou ainda de partículas com origem mista (óxidos de Fe e Ti). Os resultados da extração química seletiva sequencial permitiu concluir que, nas amostras em estudo, as fases de troca e ácido-solúveis são as fases suporte mais importantes para o Cu, Pb e Zn Os resultados dos ensaios de bioacessibilidade mostraram também que uma percentagem significativa de Cu, Pb e Zn total está disponível para absorção gástrica. Este estudo destaca também a necessidade de se caracterizar em detalhe as propriedades intrínsecas das partículas antrópicas presentes nas poeiras urbanas, de forma a compreender as variações da fração bioacessível nos diferentes elementos estudados assim como nas diferentes frações.

Óxido nítrico: propriedades e potenciais usos terapêuticos

Nitric oxide ( NO) is a substance that acts as a second-messenger and is associated with a number of important physiological functions such as regulation of the vascular tonus, immune modulation and neurotransmission. As a physiological mediator, alteration of its concentration level may cause pathophysiological disfunctions such as hypertension, septic shock and impotence. Possible therapeutic approaches are being developed to control NO levels in vivo. We review herein the main physical and chemical properties of NO, its biological functions and available chemical interventions to reduce and increment its physiological concentration levels. Recent developments in the field are also highlighted.

Azul de metileno imobilizado na celulose/TiO2 e SiO2/TiO2: propriedades eletroquímicas e planejamento fatorial

The electrochemical properties of methylene blue immobilized on cellulose/TiO2 and mixed oxide SiO2/TiO2 matrices were investigated by means of cyclic voltammetry. The electron mediator property of the methylene blue was optimized using a factorial design, consisting of four factors in two levels. The experimental observations and data analyses on the system indicate that the lowest peak separation occurs for Sil/TiOAM, 1.0 mol L-1 KCl solution and 20 mV s-1 scan rate, while values of current ratio closest to unity were found for Cel/TiOAM independent of electrolyte concentration, 0.2 or 1.0 mol L-1, and scan rate, 20 mV s-1 or 60 mV s-1.

Surfactina: propriedades químicas, tecnológicas e funcionais para aplicações em alimentos

Surfactin, a lipopeptide produced by strains of Bacillus subtilis, has been proved to be a suitable biosurfactant in several applications. For many years, it has been investigated mainly for oil recovery and environmental usage. Its chemical, technological and functional characteristics turn surfactin into an attractive compound for several utilizations. In this review we emphasize some aspects of surfactin as a new food ingredient and its potential pharmaceutical and health applications.

Carotenóides: propriedades, aplicações e biotransformação para formação de compostos de aroma

Carotenoids are widely distributed in nature, providing yellow, orange or red color in a great number of vegetables, microorganisms and in some animals. Carotenoids act as biological antioxidants and seem to play an important role in human health by protecting cells and tissues from the damaging effects of free radicals and singlet oxygen. Several authors describe the oxidative cleavage of carotenoids in flavor compounds as occuring through chemical or photochemical degradations or through biotechnological processes. Biotransformation of carotenoids seems to be a reasonable alternative to produce flavor compounds since these compounds are considered 'natural' ingredients. In this work we describe the properties of some carotenoids, as well as biotechnological approaches to obtain its oxyfunctionalized derivatives.

Propriedades elétricas e magnéticas de novos compostos com o ânion condutor [Ni(dmit)2]- e radicais magnéticos nitronil nitróxido

Three compounds have been synthesized with formulae [3-MeRad][Ni(dmit)2] (1), [4-MeRad][Ni(dmit)2] (2) and [4-PrRad][Ni(dmit)2] (3) where [Ni(dmit)2]- is an anionic pi-radical (dmit = 1,3-dithiol-2-thione-4,5-dithiolate) and [3-MeRad]+ is 3-N-methylpyridinium alpha-nitronyl nitroxide, [4-MeRad]+ is 4-N-methylpyridinium alpha-nitronyl nitroxide and [4-PrRad]+ is 4-N-propylpyridinium alpha-nitronyl nitroxide. The temperature-dependent magnetic susceptibility of 1 revealed that an antiferromagnetic interaction operates between the 3-MeRad+ radical cations with exchange coupling constants of J1 = - 1.72 cm-1 and antiferromagnetism assigned to the spin ladder chains of the Ni(dmit)2 radical anions. Compound 1 exhibits semiconducting behavior and 3 presents capacitor behavior in the temperature range studied (4 - 300 K).

Cutinases fúngicas: propriedades e aplicações industriais

Cutinases (EC 3.1.1.74) are also known as cutin hidrolases. These enzymes share catalytic properties of lipases and esterases, presenting a unique feature of being active regardless the presence of an oil-water interface, making them interesting as biocatalysts in several industrial processes involving hydrolysis, esterification and trans-esterification reactions. They are also active in different reaction media, allowing their applications in different areas such as food industry, cosmetics, fine chemicals, pesticide and insecticide degradation, treatment and laundry of fiber textiles and polymer chemistry. The present review describes the characteristics, potential applications and new perspectives for these enzymes.

Desempenho analítico de laboratórios prestadores de serviço na determinação de metais em águas

Analytical laboratories are expected to produce reliable results. Decision makers are guided in their actions (financial, legal and environmental) using analytical data provided by numerous laboratories. This work aimed to evaluate the analytical performance of Brazilian laboratories on producing trustworthy results. Nineteen laboratories, accredited and non-accredited ones, were contracted to analyze a USGS (United States Geological Survey) certified water sample for 17 chemical elements (mostly metals) without knowing the origin of the sample. Considering all the results produced, only 35% of them were valid. Three laboratories present satisfactory performances, whereas the majority showed a very poor overall performance. The outcomes of this work show the need for a more effective analytical quality program to Brazilian laboratories.

Estudo por espectroscopia micro-Raman dos mecanismos de separação de fase em vidros fosfatos de metais de transição

Glass-ceramics are prepared by controlled separation of crystal phases in glasses, leading to uniform and dense grain structures. On the other hand, chemical leaching of soluble crystal phases yields porous glass-ceramics with important applications. Here, glass/ceramic interfaces of niobo-, vanado- and titano-phosphate glasses were studied by micro-Raman spectroscopy, whose spatial resolution revealed the multiphase structures. Phase-separation mechanisms were also determined by this technique, revealing that interface composition remained unchanged as the crystallization front advanced for niobo- and vanadophosphate glasses (interface-controlled crystallization). For titanophosphate glasses, phase composition changed continuously with time up to the equilibrium composition, indicating a spinodal-type phase separation.