Effects of chloride substitution on the chemical and physical properties and the crystallization behavior in heavy metal fluoride glasses

Effect of the substitutions of chloride for fluoride on the chemical and physical properties and the crystallization behavior in heavy metal fluoride glasses has been investigated. The characteristic temperature of the glass does not changed obviously when the fluoride was taken place by chloride. Compared with samples of being free of ErF3, the doping samples are more inclined to be surface crystallization. Optical basicity in the glass system increases with increasing the negative charge provided by the chloride atoms and the absorption peak red shifted is observed in absorption spectra. XRD measurements show that not a single crystalline phase appears in the heated glass samples, which indicate the substitutions of chloride for fluoride with a variety of crystalline precipitation trends. (c) 2007 Elsevier B.V All rights reserved.

Substitution of Artemia with Brachionus in different ratios during larval rearing of Macrobrachium rosenbergii and evaluation of their feed efficacy

Larval growth during stage I-VIII was studied in Macrobrachium rosenbergii. Duration in moult periodicity were recorded-during larval development period, larvae were fed with Brachionus (grown on Baker's yeast and also Brachinous raised through organic manuring in outdoor culture containers). The performance of the feed was evaluated through substitution of Brachionus in the feeding protocol, in lieu of Artemia 1st instar. The Artemia, Brachionus substitution ratio of 75:25 was found to be most efficient. The study also indicates that the comparative growth rate of Brachionus plicatilis is higher in manure loaded tanks than with Baker's yeast. Growth rate "Y'' in culture tank being 0.245 and 0.112 and corresponding duplicating time (Td) too was found to be 2.855 and 6.365 respectively in tanks manured/enriched with pig manure.

Substitution of live feed by formulated diet: effect on the growth and survival of Betta splendens (Regan) fry

The present work evaluates the effectiveness of partial or total replacement of live feed (LF) (Tubifex) together with formulated diet (FD) for Betta splendens. Three hundred Betta splendens fry of uniform size (mean weight 0.19±0.01g) were equally distributed in five treatment groups with three replicates in glass aquaria of 351itre capacity. Fishes were given diets at different ratio of LF and FD viz. T1(C) 100% LF; T2 75% LF, 25% FD; T3 50% LF, 50% FD; T4 25% LF, 75% FD and T5 100% FD and the experiment continued for 105 days. T2 group registered highest (P<0.05) % body weight gain (125.61±0.26) and specific growth rate (2.34±0.02), which was similar to T1 and T3 groups. Lowest FCR was recorded in T2 (2.40±0.11) group, which was similar to Tl, T3 and T4 groups. Highest (P<0.05) PER was observed in T4 (1.00±0.03) group, which was similar to T3 and T5 groups. At the end of experiment, highest % survival was recoded in T1, T2 and T3 groups (96.67±1.67), which was similar to T4 group. From the study, it is concluded that LF can be successfully replaced up to 75% by FD without any adverse effect on the growth and survival of Betta splendens.

Import substitution of combination wire rope. Part 1. Design, production and evaluation of a prototype combination wire rope

Model combination wire ropes with different covering materials were prepared and worked out specification for the prototype. A table model hand operated wire rope twisting machine was also developed for this. Prototype combination wire rope was twisted in collaboration with M/s South India Wire Ropes Ltd., Alwaye. Specification details, properties and field performance of the prototype studied are reported.

Import substitution of combination wire rope. Part 2. Production and standardisation of 17 mm dia combination wire rope.

The prototype combination wire rope (Cift-CWR 1) developed for deep sea trawling was further studied for improvement, optimisation of efficiency and standardization. A series of improved prototype combination wire ropes (Cift-CWR 2 to 6) were twisted and evaluated their mechanical properties and reported in this paper with recommendations for a standard 17mm dia combination wire rope of 6S (7C+8+1 Scr) + 6 Crs(6+1+1 Crc) construction.

Import substitution of combination wire rope. Part 3: Comparison of standard Cift-CWR and imported combination wire rope

Tensile and extension properties of standard Cift-CWR and imported combination wire ropes from Japan, Norway and Denmark are studied and the analysis is presented in the paper. Tensile and chemical properties of steel wire, tensile and abrasive properties of PP covering, effect of twist on material at different stages are worked out and reported.

Some observations on the growth and cyst production characteristics of the brine shrimp Artemia sp. (Gujarat strain) in pond culture and its potential for import substitution

Experimental culture of the brine shrimp Artemia sp. (Gujarat strain) and production of cyst is discussed. The qualitative and quantitative aspects of the cyst and its economic potential for import substitution are highlighted.

Improving the superconducting properties of single grain Sm-Ba-Cu-O bulk superconductors fabricated in air by increased control of Sm/Ba substitution effects

The extreme sensitivity of Sm/Ba at high temperature in air becomes an obstacle to the fabrication of SmBCO single grains that exhibit stable and reliable superconducting properties. In this research, the superconducting properties of SmBCO single grains fabricated by top seeded melt growth (TSMG) from different batches of commercial SmBa2Cu3O 7-d (Sm-123) precursor powder using different processing atmospheres (air and 0.1% O2 in Ar), different processing methods (isothermal growth and continuous cooling) and different amounts of BaO2 content to suppress Sm/Ba substitution in air have been investigated in an attempt to understand fully the TSMG process for this system. As a result, based on extensive data, a novel and simple, low temperature post-annealing approach is proposed specifically to overcome the sensitivity of Tc to Sm/Ba substitution in order to simplify the fabrication of SmBCO and to increase its reliability with a view to the practical processing of these materials. Initial processing trials have been performed successfully to demonstrate the viability of the novel post-annealing process. © 2013 IOP Publishing Ltd.

Exciton localization due to isoelectronic substitution in ZnSTe

We have systematically investigated the optical properties of isoelectronic centers (IECs) of ZnSTe in the whole composition range from ZnS to ZnTe. In the S-rich ZnSTe photoluminescence is dominated by Te-bound excitons, while in Te-rich side, S-related bound exciton emission dominates the radiative recombination. Localization nature of IEC bound exciton emissions in both S-rich and Te-rich side ZnSTe alloys are studied in detail. (c) 2006 Elsevier B.V. All rights reserved.