Diffraction of a cylindrical pulse by a metallic half plane

A direct transform technique is applied to the initial and boundary value problem involving diffraction of a cylindrical pulse by a half plane, on which impedance type of boundary conditions must be met by the total field. The solution to the time harmonic incident plane wave is deduced as a particular case of the general time-dependent problem considered here and we avoid the Wiener–Hopf technique which leads to very complicated factorization and which masks the role of the impedance factor Z′ (a small quantity) in the expression for the scattered field.

Topology Optimization of Micromachined Structures with the Manufacturing Constraints of KOH Etching of (110) Silicon

The focus of this paper is on designing useful compliant micro-mechanisms of high-aspect-ratio which can be microfabricated by the cost-effective wet etching of (110) orientation silicon (Si) wafers. Wet etching of (110) Si imposes constraints on the geometry of the realized mechanisms because it allows only etch-through in the form of slots parallel to the wafer's flat with a certain minimum length. In this paper, we incorporate this constraint in the topology optimization and obtain compliant designs that meet the specifications on the desired motion for given input forces. Using this design technique and wet etching, we show that we can realize high-aspect-ratio compliant micro-mechanisms. For a (110) Si wafer of 250 µm thickness, the minimum length of the etch opening to get a slot is found to be 866 µm. The minimum achievable width of the slot is limited by the resolution of the lithography process and this can be a very small value. This is studied by conducting trials with different mask layouts on a (110) Si wafer. These constraints are taken care of by using a suitable design parameterization rather than by imposing the constraints explicitly. Topology optimization, as is well known, gives designs using only the essential design specifications. In this work, we show that our technique also gives manufacturable mechanism designs along with lithography mask layouts. Some designs obtained are transferred to lithography masks and mechanisms are fabricated on (110) Si wafers.

MAST: multi-script annotation toolkit for scenic text

This paper describes a semi-automatic tool for annotation of multi-script text from natural scene images. To our knowledge, this is the maiden tool that deals with multi-script text or arbitrary orientation. The procedure involves manual seed selection followed by a region growing process to segment each word present in the image. The threshold for region growing can be varied by the user so as to ensure pixel-accurate character segmentation. The text present in the image is tagged word-by-word. A virtual keyboard interface has also been designed for entering the ground truth in ten Indic scripts, besides English. The keyboard interface can easily be generated for any script, thereby expanding the scope of the toolkit. Optionally, each segmented word can further be labeled into its constituent characters/symbols. Polygonal masks are used to split or merge the segmented words into valid characters/symbols. The ground truth is represented by a pixel-level segmented image and a '.txt' file that contains information about the number of words in the image, word bounding boxes, script and ground truth Unicode. The toolkit, developed using MATLAB, can be used to generate ground truth and annotation for any generic document image. Thus, it is useful for researchers in the document image processing community for evaluating the performance of document analysis and recognition techniques. The multi-script annotation toolokit (MAST) is available for free download.

BILATERAL EDGE DETECTORS

We propose to employ bilateral filters to solve the problem of edge detection. The proposed methodology presents an efficient and noise robust method for detecting edges. Classical bilateral filters smooth images without distorting edges. In this paper, we modify the bilateral filter to perform edge detection, which is the opposite of bilateral smoothing. The Gaussian domain kernel of the bilateral filter is replaced with an edge detection mask, and Gaussian range kernel is replaced with an inverted Gaussian kernel. The modified range kernel serves to emphasize dissimilar regions. The resulting approach effectively adapts the detection mask according as the pixel intensity differences. The results of the proposed algorithm are compared with those of standard edge detection masks. Comparisons of the bilateral edge detector with Canny edge detection algorithm, both after non-maximal suppression, are also provided. The results of our technique are observed to be better and noise-robust than those offered by methods employing masks alone, and are also comparable to the results from Canny edge detector, outperforming it in certain cases.

Humor y puesta en escena en la comedia de Aristófanes

Presentado en las Jornadas sobre "El humor (y los humores) en el mundo antiguo", organizado por el Departamento de Estudios Clásicos y el Instituto de Ciencias de la Antigüedad de la UPV y celebrado en Vitoria-Gasteiz los días 16 y 17 de octubre de 2007.

Investigation of the influence of the aberration induced by a plane interface on STED microscopy

The structure of the inhibition patterns is important to the stimulated emission depletion (STED) microscopy. Usually, Laguerre-Gaussian (LG) beam and the central zero-intensity patterns created by inserting phase masks in Gaussian beams are used as the erase beam in STED microscopy. Aberration is generated when focusing beams through an interface between the media of the mismatched refractive indices. By use of the vectorial integral, the effects of such aberration on the shape of depletion patterns and the size of fluorescence emission spot in the STED microscopy are studied. Results are presented as a comparison between the aberration-free case and the aberrated cases. (C) 2009 Optical Society of America

The modulated grating hologram

A phase and amplitude, off-axis hologram has been synthesized from three computer-generated transmission masks, using a multiple-exposure holographic recording method. Each of the masks controls one fixed-phase component of the complex hologram transmittance. The basic grating is generated optically, relieving the computer of the burden of drawing details the size of each fringe. The maximum information capacity of the computer plotting device can then be applied to the generation of the grating modulation function. By this method large digital holograms (25 mm by 25 mm) have been synthesized in dichromated gelatin. The recording method is applicable to virtually any holographic medium.

The modulated grating hologram was designed primarily for the application of spatial filtering, in which the requirement is a hologram with large dynamic range and large free spectral range. Choice of a low-noise, high-efficiency medium such as dichromated gelatin will allow exceptionally large dynamic range. Independence of the optically-generated carrier grating from the computer-generated modulation functions allows arbitrarily large free spectral range.

The performance of a holographic spatial filter will be limited ultimately by noise originating from imperfections in the holographic medium. The characteristics of this noise are analyzed, and in the case of a high diffraction efficiency hologram are shown to differ significantly from previous analyses. The dominant noise source in holograms of high diffraction efficiency will be scattering of the first order or imaging wave by deformations in the hologram surface or other effects of low spatial frequency. Experimental measurements in various low-noise holographic media verify these predictions.

飞秒脉冲时空变换整形技术

飞秒激光脉冲通过时空变换技术将时域信息变换到空域，通过空域的处理再返回到时域，是实现飞秒激光脉冲整形、测量和控制的一项重要技术。在应用方面，可产生各种所需要的波形．已广泛应用在飞秒化学、信号处理、安全通信、生物学和医学成像等方面。介绍了飞秒时空变换脉冲整形的几种方法。

图像深度估计的光学微分方法

讨论了光学微分方法在图像深度估计问题中的应用。基于线性成像理论对Farid提出的光学微分模型进行了推广，即用于图像深度估计的两幅图像在成像过程中可以满足任意阶的线性微分关系。此模型拓宽了光学微分的概念，使两次成像之间关系有了更多的光学微分形式。围绕如何选择合适的光学微分关系以使系统的整体性能达到最优，分析了光学成像系统的参量对于图像深度估计的精度以及纵向分辨力的影响，并且对光学微分方法中的关键光学元件—光学掩模板的构建方法及优化问题也作了初步的探讨。

El soleamiento en las fachadas, técnicas para su reducción y pre dimensionamiento.

[EU]Lan honen helburu nagusia eraikuntzan gehituko diren argi-babeski sistema mota desberdinak aurkeztea da, bertan ematen den energia kontsumoa murrizteko asmoz. Izan ere, argi naturalaren erabilpen egoki batek eraikinaren efizientzia hobetzera eramango gaitu. Horretarako, ezinbestekoa izango da baliabide hau behar bezala ezagutzea, argitasuna eta beharrezko babesa eskaintzeko, eta ondorioz, energia aurreztea lortzeko. Babes sistema egokiena aukeratu baino lehen, aldez aurretik sortu izan diren argi-babeski mota desberdinak aztertu izan dira. Horrez gain, eguzki erradiazioa neurtzeko metodo grafiko eta analitikoak ere aztertu dira. Ondoren, Ecotect programak eskaintzen dituen simulazioei esker, eguzki erradiazioaren datu zehatzagoak lortzeko asmoz, ikasketa horretan erabiliko den eraikinaren kokapena, orientazioa eta ezaugarriak erabaki dira. Behin prototipoa definituta, programa bidez lau babes sistema mota desberdinak aztertu dira, horrela babesik gabeko eraikinean lortutako datuak alderatzeko. Azterketa Bilbo eta Sevillan egitea erabaki izan da. Izan ere, bi hiriburu hauek klimatologian duten desberdintasuna argi-babeskien aukeraketan duen eragina aztertzeko aukeratu dira, gainera, orientazioak eta argi babeskien dimentsioek ere izan dute zer esana aukeraketa garaian. Horrez gain, argi-babeskiek sortutako itzala ere aztertu izan da. Horrela, sistema hauen jarrera orokorra ikusi daiteke, eta beraz, uda garaian babesteko eta negu garaian eguzki izpiak sartzen uzteko duten ahalmena ikusi da. Bukatzeko, aurretik lortutako datu guztiei esker, eta bai kokapena zein orientazioa kontutan hartuz, babes sistema egokiena aukeratu da, jakinik ezinbestekoa dela argitasuna, babesa eta aurrezte energetikoaren arteko oreka egoki bat lortzea.

A propósito de una posible escena ritual de caza en el abrigo de Legteitira 5 (Agüenit, Sahara Occidental)

[ES] La presencia de unos personajes humanos con grandes cabezas pintadas en uno de los paneles artísticos del abrigo de Legteitira 5 genera diversas impresiones sobre su significado. A lo extraño de la composición, hay que añadir que se trata, por el momento, de un caso único en el repertorio iconográfico del Occidente del Sahara. La hipótesis de una posible relación con cabezas enmascaradas, en el contexto simbólico de una escena ritual cinegética, pudiera acaso retenerse como argumento explicativo.

A History of the Pearl Oyster Fishery in the Archipielago de las Perlas, Panama

The pearl oyster, Pinctada margaritifera mazatlanica, was once found around the Archipielago de las Perlas in Panama in abundance and it supported a substantial fishery by hard hat divers. The products were pearls, shells used for making buttons, and meats used locally for food. After the mid 1920’s, the fishery declined due to overfishing, and by the 1940’s it was nearly gone. The oysters began to repopulate the grounds during the 1970’s, but the oysters remain relatively scarce. Fishing has since resumed on a small scale by skin divers using face masks.

700V smart trench IGBT with monolithic over-voltage and over-current protecting functions

An advanced 700V Smart Trench IGBT with monolithically integrated over-voltage and over-current protecting circuits is presented in this paper. The proposed Smart IGBT comprises a sense IGBT, a low voltage lateral n-channel MOSFET (M 1), an avalanche diode (D av), and poly-crystalline Zener diodes (ZD) and resistor (R poly). Mix-mode transient simulations with MEDICI have proven the functionalities of the protecting circuits when the device is operating under abnormal conditions, such as Unclamped Inductive Switching (UIS) and Short Circuit (SC) condition. A Trench IGBT process is used to fabricate this device with total 11 masks including one metal mask only. The characterizations of the fabricated device exhibit the clamping capability of the avalanche diode and voltage pull-down ability of the MOSFET. © 2012 IEEE.

Optical vortex based Mode Division Multiplexing over graded-index multimode fibre

Mode Division Multiplexing is performed over 2km and 8km of 50μm graded-index multimode fibre using (de)multiplex phase masks based around optical vortex modes to transmit 2×56Gbps QPSK signals without MIMO equalization. © 2013 OSA.

Optical vortex based mode division multiplexing over graded-index multimode fibre

Mode Division Multiplexing is performed over 2km and 8km of 50μm graded-index multimode fibre using (de)multiplex phase masks based around optical vortex modes to transmit 2x56Gbps QPSK signals without MIMO equalization. © 2013 OSA.