Main Progress of Microgravity Sciences and Space Life Sciences Research in China

The progress of the research activities on space material sciences, microgravity ‰uid physics and combustion, space life sciences and biotechnology research, fundamental Physics in China are brie‰y summarized in the present paper. The major space missions and experimental results obtained on board the Chinese recoverable/non-recoverable satellites and the Chinese manned spaceship named ``Shen-Zhou'' are presented summarily. The recent main activities of the ground-based studies in China are introduced in brief.

Transmission Electron Microscopy Characterization of Laser Welding Cast Ni-Based Superalloy K418 Turbo Disk And Alloy Steel 42Crmo Shaft

Microstructure characterization is important for controlling the quality of laser welding. In the present work, a detailed microstructure characterization by transmission electron microscopy was carried out on the laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft and an unambiguous identification of phases in the weldment was accomplished. It was found that there are gamma-FeCrNiC austenite solid solution dendrites as the matrix, (Nb, Ti) C type MC carbides, fine and dispersed Ni-3 Al gamma' phase as well as Laves particles in the interdendritic region of the seam zone. A brief discussion was given for their existence based on both kinetic and thermodynamic principles. (c) 2007 Elsevier B.V. All rights reserved.

Research on laser welding of cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft

Exploratory experiments of laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft were conducted. Microstructure of the welded seam was characterized by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive spectrometer (EDS). Mechanical properties of the welded seam were evaluated by microhardness and tensile strength testing. The corresponding mechanisms were discussed in detail. Results showed that the laser-welded seam had non-equilibrium solidified microstructures consisting of FeCr0.29Ni0.16C0.06 austenite solid solution dendrites as the dominant and some fine and dispersed Ni3Al gamma' phase and Laves particles as well as little amount of MC short stick or particle-like carbides distributed in the interdendritic regions. The average microhardness of the welded seam was relatively uniform and lower than that of the base metal due to partial dissolution and suppression of the strengthening phase gamma' to some extent. About 88.5% tensile strength of the base metal was achieved in the welded joint because of a non-full penetration welding and the fracture mechanism was a mixture of ductility and brittleness. The existence of some Laves particles in the welded seam also facilitated the initiation and propagation of the microcracks and microvoids and hence, the detrimental effects of the tensile strength of the welded joint. The present results stimulate further investigation on this field. (c) 2006 Elsevier B.V. All rights reserved.

Hardware development and ground-based studies for drop shaft experiment on oscillatory convection in half floating-zone

Coordinated measurement of temperature, velocity and free surface oscillation were obtained by using the drop shaft facility for microgravity experiments of half floating zone convection. The ground-based studies gave transition from steady to oscillatory convection for multi-quantities measurement.

Main Progress of Microgravity Sciences and Space Life Sciences Research in China

KE Workshop Report - Main Drivers for Successful re-use of Research Data

On 23-24 September 2009 an international discussion workshop on “Main Drivers for Successful Re-Use of Research Data” was held in Berlin, prepared and organised by the Knowledge Exchange working group on Primary Research Data. The main focus of the workshop was on the benefits, challenges and obstacles of re-using data from a researcher’s perspective. The use cases presented by researchers from a variety of disciplines were supplemented by two key notes and selected presentations by specialists from infrastructure institutions, publishers, and funding bodies on national and European level. Researchers' perspectives The workshop provided a critical evaluation of what lessons have been learned on sharing and re-using research data from a researcher’s perspective and what actions might be taken on to still improve the successful re-use. Despite the individual differences characterising the diverse disciplines it became clear that important issues are comparable. Combine forces to support re-use and sharing of data Apart from several technical challenges such as metadata exchange standards and quality assurance it was obvious that the most important obstacles to re-using research data more efficiently are socially determined. It was agreed that in order to overcome this problem more efforts should be made to rise awareness and combine forces to support re-using and sharing of research data on all levels (researchers, institutions, publishers, funders, governments).

Odontocete Stranding Patterns in the Main Hawaiian Islands 1937–2002): how do they compare with live animal surveys?

In this study we (1) synthesized 65 yr of odontocete stranding data around the main Hawaiian Islands (1937–2002); (2) analyzed stranding patterns and trends over time; and (3) compared occurrence patterns based on sightings of live animals with stranding data and evaluated the compatibility of these data sets. From 1937 to 2002, 202 odontocete strandings were recorded by the National Marine Fisheries Service, Pacific Islands Regional Office. Strandings increased through time due to increased reporting effort and occurred throughout the year. The four most common of 16 species reported were Kogia spp. (18%), spinner dolphins (Stenella longirostris) (15%), striped dolphins (Stenella coeruleoalba) (11%), and sperm whales (Physeter macrocephalus) (10%). The highest proportion of strandings was recorded on O‘ahu (48%), followed by Maui/La¯na‘i (24%), Kaua‘i (12%), Hawai‘i (11%), and Moloka‘i (5%). Comparison with four previously published live animal survey studies suggests that stranding records are a good indicator of species composition and yield reasonable data on the frequency of occurrence of species in the region they cover.

Flood risk management: What are the main drivers of prevention?

4 p.

Caminhos contemporâneos Cortázar e outros destruidores de bússolas

A presente tese se ocupa de uma vertente da literatura e do cinema contemporâneos, especialmente do escritor Julio Cortázar e do cineasta David Lynch, que: busca um novo tratamento para a realidade, não esconde os artifícios discursivos das obras, joga com estratégias ilusionistas e antiilusionistas, debate a própria ficção por meio de recursos metaficcionais, que se utiliza da metáfora do teatro como espaço diferenciado e como palco de ilusões e que trabalha com a questão do fantástico (ou absurdo). Grande parte do trabalho é dedicada ao estudo da obra do escritor argentino Julio Cortázar. Estudo esse que se constrói a partir das correspondências entre as produções ficcionais e teóricas de Cortázar, além de suas próprias entrevistas. Cortázar é nosso foco principal e dele, acreditamos, brotou um veio dos mais significativos na narrativa contemporânea, que estabelece novos modos de se lidar com a representação e com as referências. É devido a esses aspectos, apontados anteriormente, que estabelecemos relações com outros autores, inclusive do cinema, como é o caso de David Lynch

Far-field spot compression without energy loss in main lob in wireless laser communication

Far-field spot compression without energy loss in main lob is of great significance to wireless laser communication. In this letter, we propose two schemes to obtain far-field spot compression without energy loss in main lob. One scheme is based on the simulated annealing (SA) algorithm. Using SA algorithm, we design the phase profile of the diffractive phase element (DPE). Using the designed DPE, far-field spot compression without energy loss in main lob is achieved. The other scheme is based on YG algorithm. By means of YG algorithm, we appropriately designed the DPE in the emitting plane. Using the DPE, far-field spot compression without energy loss in main lob is obtained. (c) 2007 Elsevier GmbH. All rights reserved.

Identification of the main allergen sensitizers in an Iran asthmatic population by molecular diagnosis

Background: There has been a significant growth in the prevalence of allergy, mainly associated to IgE-mediated disorders such as asthma and rhinitis. The identification of atopy in asthmatic patients through the measurement of specific IgE can help to identify risk factors that cause asthmatic symptoms in patients. The development and use of individualized allergen-based tests by the Component Resolved Diagnosis has been a crucial advance in the accurate diagnosis and control of allergic patients. The objective of this work was to assess the usefulness of molecular diagnosis to identify environmental allergens as possible factors influencing the development and manifestation of asthma in a group of asthmatic patients from Iran. Methods: Studied population: 202 adult asthmatic patients treated at the Loghman Hakim Hospital and Pasteur Institute of Teheran (Iran) from 2011 to 2012. Specific IgE determined by the ImmunoCAP system were used to both evaluate the patients' atopic condition and the molecules involved in the allergic sensitization. SDS-PAGE IgE-immunoblotting associated with mass spectrometry was carried out to study the cockroach IgE-binding sensitizing proteins. Results: Forty-five percent of all patients could be considered atopic individuals. Eighty-two percent of atopic patients were sensitized to pollen allergens. The Salsola kali (Sal k 1) and the Phleum pratense (rPhl p 1 and/or rPhl p 5) major allergens were the most common sensitizers among pollens (71% and 18%, respectively). Thirty-five percent of the atopic population was sensitized to cockroach. Four different allergens, including a previously unknown alpha-amylase, were identified in the cockroach extract. No significant associations could be demonstrated between the severity of asthma and the specific IgE levels in the atopic population. Statistical analysis identified the Sal k 1 as the main protein allergen influencing the development and expression of asthma in the studied population. Conclusions: Pollen and cockroach were the most relevant allergen sources in the asthmatic population. The Salsola kali major allergen was the main cause for sensitization in the atopic patients suffering asthma. Using the Component Resolved Diagnosis, it was possible to identify a new Blattella germanica cockroach allergen (Blattella alpha amylase 53 kDa) that could sensitize a relevant percentage of this population.