Avaliação da vinhaça líquida em substituição à água na terminação de bovinos em confinamento 2. Parâmetros etológicos e perfil metabólico

Fifteen animals from Canchim group and fifteen from Nelore were observed in the following treatments: water (A), molasses soluble + magnesium oxide (V) and molasses soluble + magnesium oxide + sodium bicarbonate (V+B). They were observed during continuous 24 hours every 30 days up to 90 days periods. During the weighting, every 28 days blood samples were collected to determine metabolic outline. Treatments did not affect (P>.05) animal behaviour on metabolic and the obtained mean values were within the normal range. They were, respectively for Canchim and Nelore: Feeding 270 and 223 minutes; Rumination 374 and 356 minutes; Idleness 745 and 863 minutes; Glicose 86 and 88 mg/dl; Urea 10 and 23 mg/dl: Uric acid 1,3 and 1,2 mg/dl; Total protein 7,0 and 6,8 g/dl; Albumin 3,1 and 3,1 g/dl; Creatinin 1,5 and 1,6 mg/dl; Sodium 140 and 142 meq/dl; Potassium 4,2 and 4,3 meq/1 and Calcium 10,0 and 9,8 mg/dl. It was concluded that molasses soluble as a substitute of water has not changed the ethologic parameters neither metabolic outline of both genetic group when in finishing feedlot.

Avaliação da vinhaça líquida em substituição à água na terminação de bovinos em confinamento. 1. Desempenho

During 90 days 243 finishing feedlot animals from two genetic groups, were weighed every 28 days in a randomized experimental procedure in a 2 x 3 factorial arrangement, with two breeds - Nelore (Nel) and Canchim (Can) - and three treatments: water (A), cane stillage + magnesium oxide (V) and cane stillage + magnesium oxide + sodium bicarbonate (V + B). The diet for all treatments was composed of 70% of corn silage and 30% of chopped sugar cane ad libitum plus 1 kg of ground corn and 1,5 kg of soluble yeast per animal. Results showed higher weight gain (P < 0,01) of the Can group relation to those of Nel, having respectively 1,35 and 1,22 kg/head/day. Both Can and Nel groups showed higher weight gain (P <.01) when fed with V + B, with 1,44 and 1,32 kg/head/day respectively when comparing to the other diets: Can (A) = 1,30; Can (V) = 1,31; Nel (A) = 1,16 and Nel (V) = 1,20 kg/head/day. The diet using V + B has also showed a tendency (.05

Síntese de éster de cadeia longa via catálise básica heterogênea

Um éster de cadeia longa foi sintetizado pela transesterificação do palmitato de metila com álcoois de cadeia longa usando óxido de magnésio como catalisador. Esses foram preparados pela decomposição térmica de diferentes precursores, buscando estabelecer relações entre propriedades estruturais e atividades. Temperatura e quantidade de catalisador foram variados para se avaliar o rendimento do éster em função do precursor utilizado na preparação do óxido.

Synthesis, characterization and thermal studies of alkaline earth glycolate, except beryllium and radium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Controle da porosidade e das características ácido-base de óxidos mistos derivados da hidrotalcita para aplicação em catálise

Pós-graduação em Química - IQ

Effects of different coagulants on sweet sorghum juice clarification

Sweet sorghum is a potential complementary crop for ethanol production in Brazil, United States and India. Since, phenols are playing inhibitory role in the process of ethanol production from extracted juice from sweet sorghum stalks, it's removal from juice is necessary for better ethanol yield. The aim of this research was to evaluate the use of magnesium oxide and calcium hydroxide as coagulant agents in different pH levels in the juice treatment. The experiment was arranged in a split-plot statistical design. Main treatments corresponded to the different coagulants and secondary treatments were the pH levels (6.0 and 7.0). Analysis of coagulant volume, juice pH, settling rate and sludge volume were performed during the decantation process. Clarified juice was analyzed as Brix, pH, ashes, phenolic compounds and starch. The use of magnesium oxide resulted in lower sludge volume, phenolic compounds and ashes. The use of calcium hydroxide decreased starch content, whereas clarification at pH 7.0 promoted higher sludge volume. Treating juice with magnesium oxide improved decantation dynamics of the process and clarified juice quality.

Thermal study and characterization of nicotinates of some alkaline earth metals using TG-DSC-FTIR and DSC-system photovisual

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Usinagem do alumínio da classe 6005 com uso de ferramenta cerâmica

The machining process is so much important in the economic world. Many machining parameters have been studied to maximize results, in terms of cost and lifetime. (decrease of cutting tool wear, improved surface finish, among others). The objective of this study is to evaluate the wear of a ceramic tool in the machining of the aluminum alloy 6005 A. The analysis of the wear of the cutting tools is very important due to its big impact on the final finishing of the piece as a whole. The evaluation took place in two stages, first it was done a detailed study of the literature of the whole machining process, where the study of the formation and swarf classification were among the most important steps in this phase. The second step consisted in the machining of the piece of aluminum 6005 A with a ceramic cutting tool constituded of aluminum oxide and magnesium oxide with silicon carbide impregnation. The swarf generated in this process was then photographed with a Zeiss optical microscope and analyzed for its size and shape. Through this comparison it was concluded that the swarf are generated shear swarfs, shaped like a tangled, fragmented and arcs connected, thus classifying the material as medium difficulty machining. Through the image analysis tool it was concluded that the parameter of lower wear was the: Vc = 500m / min, f = 0.10mm / rev and ap = 0.5mm

Usinagem do alumínio da classe 6005 com uso de ferramenta cerâmica

The machining process is so much important in the economic world. Many machining parameters have been studied to maximize results, in terms of cost and lifetime. (decrease of cutting tool wear, improved surface finish, among others). The objective of this study is to evaluate the wear of a ceramic tool in the machining of the aluminum alloy 6005 A. The analysis of the wear of the cutting tools is very important due to its big impact on the final finishing of the piece as a whole. The evaluation took place in two stages, first it was done a detailed study of the literature of the whole machining process, where the study of the formation and swarf classification were among the most important steps in this phase. The second step consisted in the machining of the piece of aluminum 6005 A with a ceramic cutting tool constituded of aluminum oxide and magnesium oxide with silicon carbide impregnation. The swarf generated in this process was then photographed with a Zeiss optical microscope and analyzed for its size and shape. Through this comparison it was concluded that the swarf are generated shear swarfs, shaped like a tangled, fragmented and arcs connected, thus classifying the material as medium difficulty machining. Through the image analysis tool it was concluded that the parameter of lower wear was the: Vc = 500m / min, f = 0.10mm / rev and ap = 0.5mm

Charge induced enhancement of adsorption for hydrogen storage materials

The rising concerns about environmental pollution and global warming have facilitated research interest in hydrogen energy as an alternative energy source. To apply hydrogen for transportations, several issues have to be solved, within which hydrogen storage is the most critical problem. Lots of materials and devices have been developed; however, none is able to meet the DOE storage target. The primary issue for hydrogen physisorption is a weak interaction between hydrogen and the surface of solid materials, resulting negligible adsorption at room temperature. To solve this issue, there is a need to increase the interaction between the hydrogen molecules and adsorbent surface. In this study, intrinsic electric dipole is investigated to enhance the adsorption energy. The results from the computer simulation of single ionic compounds with hydrogen molecules to form hydrogen clusters showed that electrical charge of substances plays an important role in generation of attractive interaction with hydrogen molecules. In order to further examine the effects of static interaction on hydrogen adsorption, activated carbon with a large surface area was impregnated with various ionic salts including LiCl, NaCl, KCl, KBr, and NiCl and their performance for hydrogen storage was evaluated by using a volumetric method. Corresponding computer simulations have been carried out by using DFT (Density Functional Theory) method combined with point charge arrays. Both experimental and computational results prove that the adsorption capacity of hydrogen and its interaction with the solid materials increased with electrical dipole moment. Besides the intrinsic dipole, an externally applied electric field could be another means to enhance hydrogen adsorption. Hydrogen adsorption under an applied electric field was examined by using porous nickel foil as electrodes. Electrical signals showed that adsorption capacity increased with the increasing of gas pressure and external electric voltage. Direct measurement of the amount of hydrogen adsorption was also carried out with porous nickel oxides and magnesium oxides using the piezoelectric material PMN-PT as the charge supplier due to the pressure. The adsorption enhancement from the PMN-PT generated charges is obvious at hydrogen pressure between 0 and 60 bars, where the hydrogen uptake is increased at about 35% for nickel oxide and 25% for magnesium oxide. Computer simulation reveals that under the external electric field, the electron cloud of hydrogen molecules is pulled over to the adsorbent site and can overlap with the adsorbent electrons, which in turn enhances the adsorption energy Experiments were also carried out to examine the effects of hydrogen spillover with charge induced enhancement. The results show that the overall storage capacity in nickel oxide increased remarkably by a factor of 4.

Sand geochemistry on sediment core CRP-3 from the Ross Sea, Antarctica

A total of 167 samples distubuted throughout the CRP-3 drillhole from 5.77 to 787.68 mbsf and representing fine to coarse sandstones have been analysed by X-ray fluorescence spectrometry (XRF) Bulk sample geochemistry (major and trace elements) indicates a dominant provenance of detritus from the Ferrar Supergroup in the uppermost 200 mbsf of the core. A markedly increased contribution from the Beacon sandstones is recognized below 200 mbsf and down to 600 mbsf. In the lower part of CRP-3, down to 787.68 mbsf, geochemical evidence for influxes of Ferrar materials is again recorded. On the basis of preliminary magnetostratigraphic data reported for the lower 447 mbsf of the drillhole, we tentatively evaluated the main periodicities modulating the geochemical records. Our results identify a possible influence of the precession, obliquity and long-eccentricity astronomical components (21, 41, and 400 ky frequency bands) on the deposition mechanisms of the studied glaciomarine sediments.

(Table T1) Geochemical composition of tochilinite and related minerals of ODP Hole 173-1068A

Tochilinite (approximately FeS(Mg,Fe)(OH)2) is locally abundant in Hole 1068A serpentinites from Cores 173-1068A-21R and 22R. It occurs in veins, as fillings in void space, and in intergrowths with serpentine and andradite. An apparently related mineral, but with Ca and Al largely replacing Mg, occurs in association with, and possibly as a replacement of, pyrrhotite in serpentinite breccias from the bottom of Core 173-1068A-20R. The transition from Mg-Fe-rich brucite tochilinites to Ca- and S-rich carbonate tochilinites is consistent with increasing sulfur and oxygen activity upsection. Tochilinite has been reported at other sites on the Iberia Abyssal Plain and is abundant to the point of being a rock-forming mineral in several samples from Site 1068. Rather than being a mineralogical curiosity, tochilinite appears to be common and a major sink for sulfur in the upper serpentinites of the Iberia Abyssal Plain.