Perylene as an electron-rich moiety in healable, complementary π–π stacked, supramolecular polymer systems

A two-component, supramolecular polymer blend has been designed using a novel π-electron rich bisperylene- terminated polyether. This polymer is able to self-assemble through electronically complementary π–π stacking interactions with a π-electron-deficient chain-folding polydiimide to afford thermally healable polymer blends. Model compounds were developed to assess the suitability of the deep green complexes formed between perylene residues and chain-folding bis-diimides for use in polymer blends. The polymer blends thus synthesised were elastomeric in nature and demonstrated healable properties as demonstrated by scanning electron microscopy. Healing was observed to occur rapidly at ca. 75 degC, and excellent healing efficiencies were found by tensometric and rheometric analyses. These tuneable, stimuli-responsive, supramolecular polymer blends are compared to related healable blends featuring pyrene-terminated oligomers.

Structural Characterization of Rare-Earth Doped Yttrium Aluminoborate Laser Glasses Using Solid State NMR

The structure of laser glasses in the system (B(2)O(3))(0.6){(Al(2)O(3))(0.4-x)(Y(2)O(3))(x)} (0.1 <= x <= 0.25) has been investigated by means of (11)B, (27)Al, and (89)Y solid state NMR as well as Y-3d core-level X-ray photoelectron spectroscopy, (11)B magic-angle spinning (MAS) NMR spectra reveal that the majority of the boron atoms are three-coordinated, and a slight increase of four-coordinated boron content with increasing x can be noticed. (27)Al MAS NMR spectra show that the alumina species are present in the coordination states four, five and six. All of them are in intimate contact with both the three- and the four-coordinate boron species and vice versa, as indicated by (11)B/(27)Al rotational echo double resonance (REDOR) data. These results are consistent with the formation of a homogeneous, nonsegregated glass structure. For the first time, (89)Y solid state NMR has been used to probe the local environment of Y(3+) ions in a glass-forming system. The intrinsic sensitivity problem associated with (89)Y NMR has been overcome by combining the benefits of paramagnetic doping with those of signal accumulation via Carr-Purcell spin echo trains. Both the (89)Y chemical shifts and the Y-3d core level binding energies are found to be rather sensitive to the yttrium bonding state and reveal that the bonding properties of the yttrium atoms in these glasses are similar to those found in the model compounds YBO(3) and YAl(3)(BO(3))(4), Based on charge balance considerations as well as (11)B NMR line shape analyses, the dominant borate species are concluded to be meta- and pyroborate anions.

Polymeric electro-mechanic devices applied to antibiotic-controlled release

Polymeric electroactive blends formed by electropolymerized aniline inside a non-conductive polyacrylamide porous matrix were already shown as suitable materials for the electrocontrolled release of model compounds like safranin. In this paper the intermolecular interactions between the two components of the blend are put in evidence by Raman spectroscopy measurements. Also, in situ optical microscopy was used to follow changes occurring in the polyaniline/polyacrylamide blend during pyrocathecol violet release tests. These two sets of experiments show the possibility of controlling electrochemically the release of both, safranin (a cation) and pyrocathecol violet (an anion) and allow to infer a release mechanism based on the electromechanical properties of the blends explaining the dependence of the release kinetics on the applied potential. Tetracycline release curves for different potentials and pHs are shown and the obtained profiles are in agreement with those expected for a device acting as an electrochemically driven pump due to the artificial muscle properties of the conducting phase of the blends. (c) 2007 Elsevier B.V. All rights reserved.

Monodisperse lignin fractions as standards in size-exclusion analysis Comparison with polystyrene standards

The difficulty of preparing monodisperse lignin fractions on a large scale is a limiting factor in many applications. The present paper addresses this problem by examining the properties and size-exclusion behavior of lignin isolated by the acetosolv pulping process from post-extraction crushed sugarcane bagasse. The isolated lignin was subjected to a solvent pretreatment, followed by preparative gel permeation chromatography fractionation. The fractions were analyzed by high-performance size-exclusion chromatography (HPSEC) and these samples showed a great decrease in polydispersity, compared to the original acetosolv lignin. Several fractions of very low polydispersity, close to unity, were employed as calibration curve standards in HPSEC analysis. This original analytical approach allowed calibration with these lignin fractions to be compared with the polystyrene standards that are universally employed for lignin molecular mass determination. This led to a noteworthy result, namely that the lignin fractions and polystyrene standards showed very similar behavior over a large range of molecular masses in a typical HPSEC analysis of acetosolv lignin. (C) 2009 Elsevier B.V. All rights reserved.

Eletrodos impressos modificados com poli-histidina aplicados na construção de sensores eletroquímicos para crômio(VI) e fármacos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hexahydrobenzofuranoid neolignans from an Aniba species

The trunk wood of an Amazonian Aniba species contains three novel neolignans: (2R, 3R, 3aS, 5R)-3a-allyl-5-methoxy-2-(3,4,5-trimethoxyphenyl)-3-methyl-2,3,3a,4,5,6-hexahydro-6-oxobenzofuran (canellin-D), (2R,3R,3aS,5R)-3a-allyl-5,7-dimethoxy-2-(3-methoxy-4,5-methylenedioxyphenyl)-3-methyl-2,3,3a,4,5,6-hexahydro-6-oxobenzofuran (canellin-E) and (2S,3S,3aS,5R)-3a-allyl-5-methoxy-2-(3-methoxy-4,5-methylenedioxyphenyl)-3-methyl-2,3,3a,4,5,6-hexahydro-6-oxobenzofuran (armenin-C). The absolute stereochemistries of these and of all other known hexahydro-6-oxobenzofurans were determined by CD comparisons with model compounds. © 1984.

From Sample Processing to Quantification: A Full Electrochemical Approach for Neutral Analyte Derivatization, Capillary Electrophoresis Separation, and Contactless Conductivity Detection

A thin-layer electrochemical flow cell coupled to capillary electrophoresis with contactless conductivity detection (EC-CE-(CD)-D-4) was applied for the first time to the derivatization and quantification of neutral species using aliphatic alcohols as model compounds. The simultaneous electrooxidation of four alcohols (ethanol, 1-propanol, 1-butanol, and 1-pentanol) to the corresponding carboxylates was carried out on a platinum working electrode in acid medium. The derivatization step required 1 min at 1.6 V vs. Ag/AgCl under stopped flow conditions, which was preceded by a 10 s activation at 0 V. The solution close to the electrode surface was then hydrodynamically injected into the capillary, and a 2.5 min electrophoretic separation was carried out. The fully automated flow system operated at a frequency of 12 analyses per hour. Simultaneous determination of the four alcohols presented detection limits of about 5 x 10(-5) mol As a practical application with a complex matrix, ethanol concentrations were determined in diluted pale lager beer and in nonalcoholic beer. No statistically significant difference was observed between the EC-CE-(CD)-D-4 and gas chromatography with flame ionization detection (GC-FID) results for these samples. The derivatization efficiency remained constant over several hours of continuous operation with lager beer samples (n = 40).

First report on the kinetics of the uncatalyzed esterification of cellulose under homogeneous reaction conditions: a rationale for the effect of carboxylic acid anhydride chain-length on the degree of biopolymer substitution

The kinetics of the homogeneous acylation of microcrystalline cellulose, MCC, with carboxylic acid anhydrides with different acyl chain-length (Nc; ethanoic to hexanoic) in LiCl/N,N-dimethylacetamide have been studied by conductivity measurements from 65 to 85 A degrees C. We have employed cyclohexylmethanol, CHM, and trans-1,2-cyclohexanediol, CHD, as model compounds for the hydroxyl groups of the anhydroglucose unit of cellulose. The ratios of rate constants of acylation of primary (CHM; Prim-OH) and secondary (CHD; Sec-OH) groups have been employed, after correction, in order to split the overall rate constants of the reaction of MCC into contributions from the discrete OH groups. For the model compounds, we have found that k((Prim-OH))/k((Sec-OH)) > 1, akin to reactions of cellulose under heterogeneous conditions; this ratio increases as a function of increasing Nc. The overall, and partial rate constants of the acylation of MCC decrease from ethanoic- to butanoic-anhydride and then increase for pentanoic- and hexanoic anhydride, due to subtle changes in- and compensations of the enthalpy and entropy of activation.

Revision of Singlet Quantum Yields in the Catalyzed Decomposition of Cyclic Peroxides

The chemiluminescence of cyclic peroxides activated by oxidizable fluorescent dyes is an example of chemically initiated electron exchange luminescence (CIEEL), which has been used also to explain the efficient bioluminescence of fireflies. Diphenoyl peroxide and dimethyl-1,2-dioxetanone were used as model compounds for the development of this CIEEL mechanism. However, the chemiexcitation efficiency of diphenoyl peroxide was found to be much lower than originally described. In this work, we redetermine the chemiexcitation quantum efficiency of dimethyl-1,2-dioxetanone, a more adequate model for firefly bioluminescence, and found a singlet quantum yield (Phi(s)) of 0.1%, a value at least 2 orders of magnitude lower than previously reported. Furthermore, we synthesized two other 1,2-dioxetanone derivatives and confirm the low chemiexcitation efficiency (Phi(s) < 0.1%) of the intermolecular CIEEL-activated decomposition of this class of cyclic. peroxides. These results are compared with other chemiluminescent reactions, supporting the general trend that intermolecular CIEEL systems are much less efficient in generating singlet excited states than analogous intramolecular processes (Phi(s) approximate to 50%), with the notable exception of the peroxyoxalate reaction (Phi(s) approximate to 60%).

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Synthesis, multiscale-multiphase characterization and applications of thiophene-based biohybrids

Biohybrid derivatives of π-conjugated materials are emerging as powerful tools to study biological events through the (opto)electronic variations of the π-conjugated moieties, as well as to direct and govern the self-assembly properties of the organic materials through the organization principles of the bio component. So far, very few examples of thiophene-based biohybrids have been reported. The aim of this Ph. D thesis has been the development of oligothiophene-oligonucleotide hybrid derivatives as tools, on one side, to detect DNA hybridisation events and, on the other, as model compounds to investigate thiophene-nucleobase interactions in the solid state. To obtain oligothiophene bioconjugates with the required high level of purity, we first developed new synthetic ecofriendly protocols for the synthesis of thiophene oligomers. Our innovative heterogeneous Suzuki coupling methodology, carried out in EtOH/water or isopropanol under microwave irradiation, allowed us to obtain alkyl substituted oligothiophenes and thiophene based co-oligomers in high yields and very short reaction times, free from residual metals and with improved film forming properties. These methodologies were subsequently applied in the synthesis of oligothiophene-oligonucleotide conjugates. Oligothiophene-5-labeled deoxyuridines were synthesized and incorporated into 19-meric oligonucletide sequences. We showed that the oligothiophene-labeled oligonucletide sequences obtained can be used as probes to detect a single nucleotide polymorphism (SNP) in complementary DNA target sequences. In fact, all the probes showed marked variations in emission intensity upon hybridization with a complementary target sequence. The observed variations in emitted light were comparable or even superior to those reported in similar studies, showing that the biohybrids can potentially be useful to develop biosensors for the detection of DNA mismatches. Finally, water-soluble, photoluminescent and electroactive dinucleotide-hybrid derivatives of quaterthiophene and quinquethiophene were synthesized. By means of a combination of spectroscopy and microscopy techniques, electrical characterizations, microfluidic measurements and theoretical calculations, we were able to demonstrate that the self-assembly modalities of the biohybrids in thin films are driven by the interplay of intra and intermolecular interactions in which the π-stacking between the oligothiophene and nucleotide bases plays a major role.

Von zwei- zu dreidimensionalen Graphitausschnitten

Zusammenfassung: 'Von zwei- zu dreidimensionalen Graphitausschnitten'Dissertation Florian Dötz Die vorliegende Arbeit zeichnet den synthetischen Weg von zwei- zu dreidimensionalen Graphitausschnitten nach und thematisiert insbesondere die Schnittstelle dieser beiden Bereiche, die durch den Übergang von planaren Systemen zu räumlichen Strukturen verkörpert wird und daher die Darstellung nicht-planarer polycyclischer aromatischer Kohlenwasserstoffe (PAH) vorsieht. Diese Zielsetzung mündet in einer dreiteiligen Gliederung der angefertigten Dissertation und sieht im ersten Teil die Synthese planarer Graphitsegmente durch oxidative Cyclodehydrierung entsprechender Oligophenylvorläufer mit Eisen(III)chlorid vor, gefolgt von der Darstellung nicht-planarer PAHs mit denselben oxidativen Methoden sowie der Präparation und Charakterisierung dreidimensionaler, supramolekularer PAH-Aggregate.Der erste Abschnitt beschreibt die Synthese von kleineren PAHs als Modellverbindung für größere Systeme und ihre UV-spektroskopische Charakterisierung. Daran anknüpfend wird die Synthese mehrerer heteroatomsubstituierter Derivate des Hexa-peri-hexabenzocoronens (HBC) vorgestellt und ihre flüssigkristallinen Eigenschaften eingehend untersucht. Dabei wurde mit der oxidativen Cyclodehydrierung geeigneter Vorläufer auf Einkristalloberflächen ein neuer Weg zur Synthese dieser Verbindungen etabliert.Im Zentrum des zweiten Teils dieser Arbeit stand die Induktion von Nichtplanarität in ausgedehnten PAHs mit den im ersten Abschnitt entwickelten Synthesekonzepten. Hier konnte mit der erfolgreichen Darstellung eines 18fach methoxysubstituierten HBC-Derivats eine erstaunliche Krümmung des aromatischen Systems erreicht werden, wie durch Kristallstrukturanalyse gezeigt wurde. Anhand mehrerer Beispiele wurde ebenso die Leistungsfähigkeit der verwendeten Cyclodehydrierungsmethode verdeutlicht, da viele Vorläufermoleküle gegenüber den Reaktionsbedingungen nicht inert sind.Der letzte Teil dieser Arbeit beschreibt schließlich die Präparation und Charakterisierung dreidimensionaler, supramolekularer PAH-Aggregate auf der Basis von HBC-Amiden, deren Eigenschaften sich durch eine sorgfältige Wahl der jeweiligen Monomerbausteine manipulieren lassen. Bei Verwendung von chiralen Monomeren wird hier die Expression von supramolekularer Chiralität erreicht und durch spektroskopische und chiroptische Methoden belegt.

Squaraine mit ausgedehnter Konjugation

Squaraine mit ausgedehnter Konjugation: Die vorliegende Arbeit ist in zwei Teilbereiche gegliedert, wobei der erste Teil die Synthese und Eigenschaftsuntersuchung symmetrischer und unsymmetrischer, stilbenoider Squaraine mit ausgedehnter Konjugation (DAD-Systeme) betrifft. Im zweiten Teil der Arbeit werden als Modellverbindungen für diese Squaraine Oligo(phenylenvinylen)e (OPVs) mit terminaler Donor-Acceptor-Substitution hergestellt.Es wurden drei unterschiedliche Klassen von konjugationsverlängerten Squarainen synthetisiert: unsymmetrische und symmetrische Monosquaraine sowie Oligosquaraine mit zwei, drei oder vier quarylium-Einheiten. Um eine bessere Löslichkeit zu gewährleisten, tragen die meisten Verbindungen voluminöse, flexible Bis(2-hexyloctyl)amino-Reste. Teilweise konnte die Löslichkeit auch durch zusätzliche Hexylseitenketten noch weiter verbessert werden. Der Aufbau der stilbenoiden Resorcine, die zur Synthese der entsprechenden Squaraine benötigt werden, erfolgte fast ausschließlich über die Wittig-Horner-Reaktion. Die 3,5-Dihydroxysubstitution erhöht die Nucleophilie in der 4-Position, so daß sich die stilbenoiden Resorcine in guten Ausbeuten mit Quadratsäure oder mit einer Semiquadratsäure zu den gewünschten Squarainen kondensieren ließen. Die Herstellung der Donor-Acceptor-substituierten OPVs erfolgte nach einer konvergenten Synthesestrategie, bei der auf eine repetitive Wittig-Horner-Reaktion und eine einfache Schutzgruppentechnik zurückgegriffen wurde. Als Acceptorgruppen dienten Formyl-, Cyano- und Nitrosubstituenten, als Donorgruppe wurden Bis(2-Hexyloctyl)amino-Reste eingesetzt. Die igenschaftsuntersuchungen an den konjugierten Oligomeren konnten zur Aufklärung des ungewöhnlichen spektroskopischen Verhaltens der Squaraine beitragen. Es wurde ein athematischer Ansatz entwickelt, der das Absorptionsverhalten D-A-substituierter Oligo(phenylenvinylen)e exakt beschreiben kann. Semiempirische Rechnungen und elektrooptische bsorptionsmessungen an diesen Verbindungen bestätigten die experimentell gefundenen Trends.

Protonenleitung in imidazolhaltigen Materialien als Modellsysteme für wasserfreie Brennstoffzellenmembranen

Es wird ein neues Konzept für ein protonenleitendes Polymer vorgestellt, das ohne eine zweite, flüssige Phase auskommt. Es beruht darauf, basische Gruppen (Imidazol) über flexible Spacer kovalent an ein Polymerrückgrat zu binden und durch Dotierung mit einer geringen Menge Säure Ladungsträger (Protonen) in dieses System einzubringen.Um die für die Leitfähigkeit und ihren Mechanismus verantwortlichen Größen zu identifizieren, wurde ein Satz von niedermolekularen Modellverbindungen definierter Struktur und hoher Reinheit synthetisiert und im reinen Zustand sowie nach Dotierung mit geringen Mengen Säure umfassend charakterisiert. Untersucht wurden die thermischen Eigenschaften, die Leitfähigkeit, die Diffusion der jeweiligen Modellverbindung sowie ggf. der zugesetzten Säure, das Protonierungsgleichgewicht und die dielektrischen Eigenschaften. Insbesondere wurden durch den Vergleich von Leitfähigkeits- und Diffusionsdaten unter Anwendung der Nernst-Einstein-Beziehung Rückschlüsse auf den Leitmechanismus gezogen.Es wurden Leitfähigkeiten von bis zu 6.5E-3 S/cm bei 120°C erreicht. Der Anteil der Strukturdiffusion (vergleichbar mit dem Grotthus-Mechanismus in Wasser) an der protonischen Leitfähigkeit betrug bis zu über 90%. Als entscheidende Faktoren für die Leitfähigkeit wurden die Glastemperatur und, mit geringerer Priorität, der Imidazolgehalt des Materials identifiziert. Die Temperaturabhängigkeit aller untersuchten Transportgrößen ließ sich durch die Vogel-Tamman-Fulcher-Gleichung exzellent beschreiben.Die vorgestellten Daten bilden die Grundlage für den Entwurf eines entsprechenden Polymers.

Synthese und Reaktivität styrylsubstituierter p-Benzochinone

Synthese und Reaktivität styrylsubstituierter p-Benzochinone Oligo- und Poly(1,4-phenylenvinylene) (OPV, PPV) stellen eine für die Materialwissenschaft äußerst interessante Verbindungsklasse dar, die in Form von Halbleitern, Photoleitern, elektrolumineszierenden Systemen und negativen Photoresists breitgefächerte Anwendung findet. Allerdings stellt die Alterung dieser Materialien in Gegenwart von Sauerstoff und anderen Oxidationsmitteln ein signifikantes Problem dar. So wird z. B. die technische Anwendung von Leuchtdioden auf Polymerbasis durch ihre geringe Betriebsdauer eingeschränkt. Als Beitrag zur Untersuchung des oxidativen Abbaus von Poly- bzw. Oligo(p-phenylenvinylenen) [PPV, OPV] wurden verschiedene 2-Styryl-1,4-benzochinone - sowie höhere Oligomere - synthetisiert, die das Strukturelement einer hoch oxidierten Form von OPV's aufweisen. Durch Einführung einer Cyanogruppe an der olefinischen Doppelbindung wurde die Reaktivität der Modellsysteme gezielt beeinflußt. Die 2-Styryl-1,4-benzochinone mit unsubstituierter Doppelbindung dimerisieren in Lösung quantitativ im Sinne von Diels-Alder-Reaktionen zu den entsprechenden Cycloaddukten. Die Dimerisierungen verlaufen chemo-, regio- und stereoselektiv, was sich anhand von Grenzorbital-Betrachtungen erklären läßt.An der Oberfläche von Kieselgel erfolgt eine vollständige Umwandlung der Dimere, deren zwei Hauptprodukte identifiziert werden konnten: Neben Verbindungen, die durch eine intramolekulare [4+2]-Cycloaddition nach erfolgter Dehydrierung / Oxidation gebildet werden, entstehen verschiedene Additionsprodukte der Dimere mit Nucleophilen (Wasser, Ethanol). Cyanosubstitution führt bereits bei den als Vorstufe dienenden Stilbenen zu einer erleichterten (E/Z)-Photoisomerisierung in Lösung, die zu einem photostationären Gleichgewicht führt, welches sich durch einen hohen Anteil der (E)-Konfiguration auszeichnet. Nach erfolgter Oxidation kann ebenfalls eine Dimerisierung beobachtet werden. Bei direkter Nachbarschaft der Cyanogruppe zum Chinonring erfolgt stattdessen ein intramolekularer Ringschluß unter Ausbildung eines Benzofuranderivats.Die beobachtete Reaktivität der synthetisierten Chinonsysteme steht in Einklang mit einem möglichen sekundären Abbaumechanismus, der nach primärer Oxidation zu der Alterung von PPV's beitragen kann.