Boron diffusion in Ge+ premorphized and BF2+ implanted Si(001)

The annealing behavior of Si implanted with Ge and then BF2 has been characterized by double crystal X-ray diffraction (DCXRD) and secondary ion mass spectroscopy (SIMS). The results show that annealing at 600 degrees C for 60 minutes can only remove a little damage induced by implantation and nearly no redistribution of Ge and B atoms has occurred during the annealing. The initial crystallinity of Si is fully recovered after annealing at 950 degrees C for 60 minutes and accompanied by Ge diffusion. Very shallow boron junction depth has been formed. When annealing temperature rises to 1050 degrees C, B diffusion enhances, which leads to a deep diffusion and good distribution of B atoms into the Si substrate. The X-ray diffraction (004) rocking curves from the samples annealed at 1050 degrees C for 60 minutes display two SiGe peaks, which may be related to the B concentration profiles.

环糊精衍生物的设计、合成及其对环辛烯光异构化研究

环糊精(Cyclodextrins, CDs)经化学修饰后可以得到各种类型的衍生物，不仅可以扩展其原有的键合能力，而且还可以改变其选择性，是当代超分子化学的一个研究热点。环糊精第二面的仲羟基比第一面的伯羟基有着更好的催化性能，第二面的选择性修饰将产生更多有价值的衍生物，可用于催化、酶模拟、手性识别等方面。 取代苯甲酰基修饰环糊精对顺式环辛烯(cis-cyclooctene)光异构化反应有非常重要的影响作用，苯环上取代基的性质和取代位置与产物的%ee值和对映体构型之间存在某种内在联系。有目的地选择适宜取代基，设计、合成新型环糊精光增感剂, 有可能按预定目的得到更高%ee值的反式环辛烯；同时，取代苯甲酰基修饰环糊精对cis-cyclooctene光异构化的增感机理有待于进一步阐明。 本论文工作对环糊精的化学修饰以及超分子体系对cis-cyclooctene不对称光异构化反应方面的进展进行了调研。合成了一系列单-6-位取代苯甲酰基修饰环糊精，用于cis-cyclooctene光异构化增感反应，并用圆二色光谱滴定法研究这些环糊精衍生物与cis-cyclooctene的相互作用，以探索光增感反应机理。在此基础上，探讨了环糊精第二面的选择性修饰方法。内容主要包括： 1. 简要介绍了超分子化学的概况，并对环糊精的选择性修饰方法和超分子体系对cis-cyclooctene不对称光异构化反应的主要成果和最新进展进行了评述。 2. 合成了12种单-6-O-(取代苯甲酰基)-β-环糊精，其中10种为新化合物。采用紫外光谱、红外光谱、核磁共振波谱以及质谱等手段对化合物的结构进行了表征。 3. 探索了直接选择性修饰环糊精第二面的便捷新方法。用取代苯甲酰咪唑酯为酰化试剂，0.2M碳酸盐缓冲溶液(pH=9.9)作催化剂，能够有效地活化2-位仲羟基，对环糊精第二面进行选择性修饰，此方法既简便又经济；同时，发现取代苯甲酰基能够在β-CD第二面的2-位、3-位羟基间相互迁移。 4. 用单-6-O-(取代苯甲酰基)-β-环糊精作光增感剂，对cis-cyclooctene光异构化反应进行研究。实验结果证明：取代苯甲酰基上的取代基性质、位置、长度对反应的对映选择性有很大影响；此外，反应体系溶剂极性对产物的%ee值和对映体构型也有重大影响。用单-6-O-(3-甲氧苯甲酰基)-β-CD作增感剂，cis-cyclooctene光异构化反应产物(R)-trans-cyclooctene的对映选择性为45.8%ee，是到目前为止取得的最好对映选择性。 5. 采用圆二色光谱滴定法研究环糊精衍生物与cis-cyclooctene的相互作用，计算包结物的平衡常数，研究包结物的相对稳定性，为探索光增感反应机理提供基础。我们猜测：电子效应对cis-cyclooctene光异构化反应的影响，可能比取代基位置对反应的影响更大，借助电子效应有希望获得更高的%ee值。 Cyclodextrins can be subjected to diverse modifications to give a wide variety of cyclodextrin derivatives, which could not only extend their original molecular binding ability, but also alter their molecular selectivity. Therefore, cyclodextrin chemistry is currently a significant topic in supramolecular chemistry. The more open secondary hydroxyl side of CDs is stated to be catalytically very important, modifications of this face are believed to produce valuable derivatives for catalysis, enzyme mimic, chiral discrimination, etc. Mono-6-O-(substituted benzoyl)-β-CDs as novel supramolecular photosensitizing hosts have recently excited considerable attention in photochirogenesis. The supramolecular photosenstization of cis-cyclooctene mediated by them gave chiral trans-cyclooctene, enantiomeric excess of which was critically affected by the substituent introduced to the sensitizer moiety. In order to enhance the photoenantiodifferentiating ability, and elucidate the origin mechanisms of substituent-dependent enantioselectivity, in this work a series of mono-6-O-(substituted benzoyl)-β-CDs have been synthesized, and applied for enantiodifferentiating photoisomerization of cis-cyclooctene. The major contents are as follows: 1. The general aspects of supramolecular chemistry were descibed briefly. The new progress and important achievements on methods of selective modification of cyclodextrin and supramolecular enantiodifferentiating photoisomerization of cis-cyclooctene were reviewed. 2. Twelve mono-6-O-(substituted benzoyl)-β-CDs including ten novel compounds have been synthesized. Their structures have been characterized by using UV-vis, IR, NMR and MS methods. 3. A new convenient strategy for direct acylation of β-cyclodextrin on the secondary hydroxyl face was achieved by using the combination of N-benzoylimidazole and carbonate buffer in DMF, and the acyl migration between the C-2 and C-3 hydroxyl groups of β-cyclodextrin was found. 4. Experiments using mono-6-O-(substituted benzoyl)-β-CDs as chiral sensitizing hosts for mediating the enantiodifferentiating photoisomerization of cis-cyclooctene, were carried out. The results indicate that enantiomeric excess was critically affected, or even switched in sign, by the substituent introduced to the sensitizer moiety, and polarity of solvent. Using mono-6-O-(3-methoxybenzoyl)-β-CD as chiral sensitizing host, (R)-trans-cyclooctene was obtained in up to 45.8% enantiomeric excess, which is the highest value ever reported for supramolecular photochirogenesis with analogous hosts. 5. The conformational variation of these modified CDs and their complexation behaviors with cis-cyclooctene were examined by circular dichroism spectroscopy in water-methanol mixed solvents, which reveal that the orientation of chromophore was highly sensitive to the type, position and length of the introduced substituents. In the end, the complex stability constants(Ks) were calculated, and the mechanisms of reaction were discussed. Maybe, electronic effects are more important than positions of substituents for mediating the enantiodifferentiating photoisomerization of cis-cyclooctene.

Activated carbon supported bimetallic CoMo carbides synthesized by carbothermal hydrogen reduction

A carbothermal hydrogen reduction method was employed for the preparation of activated carbon supported bimetallic carbide. The resultant samples were characterized by BET surface area measurement, X-ray diffraction, and temperature-programmed reduction-mass spectroscopy. The results showed that nanostructured beta-Mo2C can be formed on the activated carbon by carbothermal hydrogen reduction above 700 degreesC. The particle sizes of beta-Mo2C increase with increasing reaction temperatures and Mo loading. The bimetallic CoMo carbide can be synthesized by the carbothermal hydrogen reduction even around 600 degreesC. The bimetallic CoMo carbide is from carbothermal hydrogen reduction of CoMoO4 precursor and is easily formed when the Co/Mo molar ratio is 1.0. Separation of the bimetallic CoMo carbide phase into Mo carbide and Co metal occurs when the temperature of the reduction is above 700 degreesC. The addition of a second metal such as Co and Ni, decreases the formation temperature of carbide because the second metal promotes formation of CHx species from reactive carbon atoms or groups on carbon material and hydrogen, which further carburizes oxide precursors. (C) 2003 Elsevier Science Ltd. All rights reserved.

Ammonia synthesis on graphitic-nanofilament supported Ru catalysts

Graphitic-nanofilaments (GNFs) supported ruthenium catalysts were prepared and characterized by NZ physisorption, X-ray diffraction (XRD), transmission electron microscope (TEM) and temperature programmed reduction-mass spectroscopy (TPR-MS) and used for ammonia synthesis in a fixed bed microreactor. The TEMs of the Ru/GNFs and Ru-Ba/GNFs catalysts indicate that the Ru particles are in the range of 2-4 nm, which is the optimum size of Ru particles for the maximum number of B5 type sites. The activity of Ru-Ba/GNFs catalysts is higher than that of Ru-Ba/AC by about 25%. The methanation reaction on the Ru/GNFs catalyst is remarkably inhibited compared with a Ru/AC catalyst. High graphitization of GNFs is likely to be the reason for the high resistance to the methanation reaction. The power rate law for ammonia synthesis on Ru-Ba/GNFs catalysts can be expressed by r = Kp(NH3)(-0.4) P-N2(0.8) P-H2(-0.7), indicating that H-2 is an inhibitor for N-2 activation on the catalyst. Catalysts with the promoters Ba, K and Cs show large differences in activity for ammonia synthesis. The catalyst promoted with Ba (Ba/Ru = 0.2 molar ratio) was found to be the most active, whereas that with a K promoter was the least active. (C) 2003 Elsevier B.V. All rights reserved.

One-Step Synthesis of Folic Acid Protected Gold Nanoparticles and Their Receptor-Mediated Intracellular Uptake

We report here a facile method to obtain folic acid (FA)-protected gold nanoparticles (Au NPs) by heating an aqueous solution of HAuCl4/FA in which FA acts as both the reducing and stabilizing agent. The successful formation of FA-protected Au NPs is demonstrated by UV/Vis spectroscopy, transmission electron microscopy (TEM), selected-area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR). ne intracellular uptake of these nanoparticles is facilitated by HeLa cells overexpressing the folate reporter, which itself is significantly inhibited by free FA in a competitive assay as quantified by inductively coupled plasma mass spectroscopy (ICP-MS). This simple one-step approach affords a new perspective for creating functional nanomaterials, and the resulting biocompatible, functional Au NPs may find some prospective applications in various biomedical fields.

Electronic structures and chemical bonding in transition metal monosilicides MSi (M=3d, 4d, 5d elements)

Bond distances, vibrational frequencies, electron affinities, ionization potentials, dissociation energies, and dipole moments of the title molecules in neutral, positively, and negatively charged ions were studied using the density functional method. Ground state was assigned for each species. The bonding patterns were analyzed and compared with both the available data and across the series. It was found that besides an ionic component, covalent bonds are formed between the metal s, d orbitals and the silicon 3p orbital. The covalent character increases from ScSi (YSi) to NiSi (PdSi) for 3d (4d) metal monosilicides, then decreases. For 5d metal monosilicides, the covalent character increases from LaSi to OsSi, then decreases. For the dissociation of cations, the dissociation channel depends on the magnitude of the ionization potential between metal and silicon. If the ionization potential of the metal is smaller than that of silicon, channel MSi+-> M++Si is favored. Otherwise, MSi+-> M+Si+ will be favored. A similar behavior was observed for anions, in which the dissociation channel depends on the magnitude of electron affinity.

Highly efficient iridium(III) complexes with diphenylquinoline ligands for organic light-emitting diodes: Synthesis and effect of fluorinated substitutes on electrochemistry, photophysics and electroluminescence

A series of novel cyclometalated iridium(III) complexes bearing 2,4-diphenylquinoline ligands with fluorinated substituent were prepared and characterized by elemental analysis, NMR and mass spectroscopy. The cyclic voltammetry, absorption, emission and electroluminescent properties of these complexes were systematically investigated. Electrochemical studies showed that the oxidation of the fluorinated complexes occurred at more positive potentials (in the range 0.57-0.69 V) than the unfluorinated complex 1 (0.42 V). In view of the energy level, the lowering of the LUMO by fluorination is significantly less than that of the HOMO. The weak and low energies absorption bands in the range of 300-600 nm are well resolved, likely associated with MLCT and (3)pi-pi* transitions. These complexes show strong orange red emission both in the solution and solid state. The emission maxima of the fluorinated complexes showed blue shift by 9, 24 and 15 nm for 2, 3 and 4, respectively, with respect to the unfluorinated analogous 1. Multilayered organic light-emitting diodes (OLEDs) were fabricated by using the complexes as dopant materials. Significantly higher performance and lower turn-on voltage were achieved using the fluorinated complexes as the emitter than that using the unfluorinated counterpart 1 under the same doping level.

Synthesis and characterization of novel orange-emitting iridium(III) complexes with diphenylquinoline ligands containing fluorinated substituent

Three new cyclometalated iridium(III) complexes based on ligands of diphenylquinoline with fluorinated substituents were prepared, and characterized by elemental analysis (EA), H-1 NMR, and mass spectroscopy (MS). The photophysical and electrophosphorescent properties of the complexes were briefly discussed.

Enzymatic and kinetic properties of selenium-containing catalytic antibody with cGPX activity

Three selenium-containing catalytic antibodies mHB4, mHB5 and mHB7 which acted as mimics of cytosolic glutathione peroxidase(cGPX), were prepared by chemically introducing selenium into monoclonal antibodies HB4, HB5 and HB7. HB4. HB5 and HB7 were raised against a GSH derivative GSH-S-DNP dibenzyl ester, The cGPX activity of mHB4, mHB5, mHB7 were 170, 1 867, 32 U/mu mol, respectively. The cGPX activity of mHB5 was 0, 32 fold of natural rabbit liver cGPX and 1. 51 fold of m4A4. About two atoms of selenium existed in each of mHB5 molecule determined by inductively-coupled plasma/mass spectroscopy (ICP-MS), The optimal activity of mHB5 was at between pH 8. 4 and 8, 8, The reaction catalyzed by mHB5 involved a Ping-Pong mechanism. At pH 7. 0 and 37 degreesC, the apparent second-order rate constants for reaction of mHB5 with H2O2 and t-ROOH were as followed: k(+1) (H2O2) = 9. 71 x 10(6) L/(mol min), k(+1)(t-ROOH) = 5. 99 x 10(5) L/(mol.min). Rate accelerations (k(cat)/K-m/k(uncat)) 9. 8 x 10(6) and 3.7 x 10(5) fold those of the uncatalytic reaction were observed.

Morphology, structure, and rheological property of linear low-density polyethylene grafted with acrylic acid

The chain structure, spherulite morphology, and theological property of LL-DPE-g-AA were studied by using electronspray mass spectroscopy, C-13-NMR, and rheometer. Experimental evidence proved that AA monomers grafted onto the LLDPE backbone formed multiunit AA branch chains. It was found that AA branch chains could hinder movement of the LLDPE main chain during crystallization. Spherulites of LLDPE became more anomalous because of the presence of AA branch chains. Rheological behavior showed that AA branch chains could act as an inner plasticizer at the temperature range of 170-200 degreesC, which made LLDPE-g-AA easy to further process. (C) 2001 John Wiley & Sons, Inc.

SYNTHESIS AND X-RAY STRUCTURE OF A SEMICONDUCTING ORGANOMETALLIC SALT [FECP(TOL)](2)[NI(MNT)(2)]

The compound [FeCp(Tol)](2)[Ni(mnt)(2)] has been prepared from [FeCp(Tol)]AlCl4 and Na-2[Ni(mnt)(2)]. This new organometallic radical ionic salt has been characterized by elemental analysis, IR, H-1 NMR and mass spectroscopy. The X-ray structure of the compound shows there are segregated cation and anion stacks in the perpendicular directions, The molecular anions form a zig-zag stacking along the b axis, and between every two neighbouring anion planes a methyl group of the cation is inserted. This gives rise to a long spacing of 6.87 Angstrom, between the anion planes. The cations stack along the c axis, with the closest spacing of 3.457 Angstrom between the cyclopentadienyl plane and the neighbouring toluene plane, which is shorter than the sum of Van der Wall's radii. Conductivity measurements showed the compound as a semiconductor with a room temperature conductivity of 1.6 X 10(-4) Scm(-1).

A NOVEL BROMOPHENOL FROM MARINE RED ALGA Symphyocladia latiuscula

2,3,6-Tribromo-4,5-dihydroxybenzyl ethyl ether (1), a new bromophenol, was isolated from the ethanol extract of marine red alga Symphyocladia latiuscula, with a known compound, 2,3,6-tribromo-4,5-dihydroxybenzyl methyl ether ( 2). Their structures were elucidated by spectroscopic analysis, including high-resolution mass spectroscopy, and 1 and 2-dimensional NMR techniques. Compounds 1 and 2 showed inhibitory activity against Staphyloccocus aureus with IC50 102 and 50 mu g/mL, respectively.

Self-assembled triple helicates with preferential helicity

The enantiomerically pure ligands LRR and LSS (N,N'-bis(-2,2'-bipyridyl-5-yl)carbonyl-(1S/R,2S/R)-(+/-)-1,2-diaminocyclohexane) have been synthesised by linking two 2,2'-bipyridine units by (R,R)- and (S,S)-1,2-diaminocyclohexane respectively. The crystal structure confirmed that the ligand had a twisted orientation between the two chelating units. The reaction of LRR and LSS with Fe(II), Co(III), Cd(II) and Zn(II) afforded dinuclear complexes confirmed by ES mass spectroscopy. CD spectroscopy indicated that the chiral diaminocyclohexane conferred helicity to the metal centre giving a dominant triple helicate diastereoisomer, with the LRR ligand giving a delta-configuration of each metal centre (P helicate) and the LSS ligand a lambda configuration (M helicate). 1H NMR spectroscopy confirmed a dominant major diastereoisomer with cadmium. The Zn(II) and Cd(II) complexes however were observed to undergo rapid ligand dissociation in solution.

CHARACTERIZATION OF FILLING MATERIALS FOR EASEL PAINTINGS

Developing appropriate treatments for easel paintings can be complex, as many works are composed of various materials that respond in different ways. When selecting a filling material for these artworks, several properties are investigated including: the need for the infill to react to environmental conditions in a similar manner as the original material; the need for the infill to have good handling properties, adhesion to the original support, and cohesion within the filling material; the ability for the infill to withstand the stress of the surrounding material and; be as flexible as the original material to not cause further damage. Also, changes in colour or mechanical properties should not occur as part of the ageing process. Studies are needed on acrylic-based materials used as infills in conservation treatments. This research examines some of the chemical, physical, and optical changes of eleven filling materials before and after ageing, with the aim to evaluate the overall appropriateness of these materials as infills for easel paintings. The materials examined were three rabbit skin glue (RSG) gessoes, and seven commercially prepared acrylic materials, all easily acquired in North America. Chemical analysis was carried out with Fourier transform infrared (FTIR) spectroscopy and X-ray fluorescence (XRF), pyrolysis gas chromatography-mass spectroscopy (Py-GC/MS), and differential scanning calorimetry (DSC). Overall the compositions of the various materials examined were found to be in agreement with the available literature and previous research. This study also examined characteristics of these materials not described in previous works and, additionally, presented the compositions and behaviour of several commonly used materials with little literature description. After application of an ageing regimen, most naturally aged and artificially aged samples displayed small changes in gloss, colour, thickness, and diffusive behaviour; however, to evaluate these materials fully mechanical testing and environmental studies should be carried out.