Pinoamislaitteen suunnittelu vetokoneen jälkeiselle linjalle

Työn tavoitteena oli suunnitella vetokoneen linjalle pinoamislaite. Laitteen tehtävänä on pinota yksittäin vetokoneelta tulevista tuotteista asiakasvaatimusten mukaisia pinoja. Laitteen suunnittelu toteutettiin käyttämällä systemaattisen koneensuunnittelun metodia. Diplomityö rajattiin koskemaan laitteen mekaanisten ratkaisujen suunnittelua. Suunnittelussa huomioitiin linjan asettamat vaatimukset, jotka koskevat sekä tuotantomäärää että tilojen käyttöä. Laitteen suunnittelussa ja mallinnuksessa käytettiin Solidworksin 3D-mallinnusohjelmaa. Mallinnettuja ratkaisuvaihtoehtoja verrattiin keskenään. Parhaiten vaatimusluettelossa esitetyt vaatimukset täyttänyt ratkaisumalli valittiin kehitettäväksi. Suunnitellusta laitteesta valmistettiin työpiirustukset sekä kokoonpanokuvat.

Pyörivän palopään suunnittelu

Työssä suunniteltiin pienten kiinteistöjen keskuslämmityksen käyttöön kiinteää polttoainetta käyttävä palopää, jossa palopään pyörimisliike sekoittaa polttoainetta palamisen aikana. Polttoaineen sekoittamisella pyritään parantamaan palamisen hyötysuhdetta ja vähentämään haitallisia päästöjä. Laitteen suunnittelu toteutettiin systemaattista koneensuunnittelun metodia mukaillen. Työn aihe rajattiin koskemaan ainoastaan palopään mekaniikan suunnittelua ja mitoitusta. Suunnittelussa pyrittiin huomioimaan valmistusystävällisyys ja minimoimaan kustannukset. Laitteen suunnittelussa käytettiin SolidWorks 2014 – ohjelmaa.

Vaakatasossa toimivan modulaarisen pakkausyksikön prässin suunnittelu kartonkipakkauksille

Kartonkivuokien käyttö elintarviketeollisuudessa on kasvanut vuosi vuodelta ja kuluttajat ovat löytäneet kartonkipakkaukset niiden ekologisuuden, graafisen ulkoasun sekä turvallisuuden ansiosta. Vuokien valmistus mekaanisella prässäyksellä kehittyy jatkuvasti ja uusi teknologia mahdollistaa täysin uudentyyppisten prässien valmistuksen. Työn tavoitteena on tutkia voidaanko mekaaninen prässäys toteuttaa vaakatasossa uutta teknologiaa hyödyntämällä kustannustehokkaasti. Lisäksi tavoitteena on selvittää, millä voimantuottomenetelmällä prässiltä vaadittava voimantuotto on edullisinta toteuttaa. Suunnittelussa otetaan huomioon olemassa olevat työkalut, modulaarisuus, EU:n elintarvikelainsäädäntö sekä muut kriittiset tekijät. Työssä sovelletaan metodisen konstruoinnin mukaisesti systemaattista ongelmanratkaisua (VDI 2221). Lisäksi työssä käydään läpi kilpaileva menetelmä arvoanalyysi. Suunnittelua ja komponenttivalintoja analysoidaan SWOT- sekä pisteanalyysien avulla. Suunnittelussa syntyneiden ratkaisujen lujuusominaisuuksia tarkastellaan FEM-analyysillä. Tuloksista havaittiin, että vaakatasossa suoritettava prässäyksen voimantuotto on edullisinta ja yksinkertaisinta toteuttaa sähkömekaniikalla, että halutut ominaisuudet voidaan saavuttaa ja rakenne pitää mahdollisimman kompaktina. Kustannustehokkuuden saavuttamiseksi hankinnat on syytä kilpailuttaa huolellisesti. Työn lopussa esitetään mahdollisia jatkokehityskohteita, joita syntyi tämän diplomityön aikana.

Desenvolupament d'una draga per al mostreig de sòls marins

A l'empresa PRAESENTIS S.L. se li proposà la construcció d'una draga per utilitzar-la en el mostreig de sòls marins en expedicions científiques a mar obert. Segons les especificacions del projecte, la draga resultant haurà de ser capaç de recollir mostres d'una capacitat d'entre 60 i 80 l. amb una profunditat de cavat de fins a 20 cm., i haurà de poder assolir profunditats de treball de fins a 500 m. per sota el nivell del mar. El tipus de sòl en el qual es treballarà és de tipus arenós. La draga projectada és un mecanisme basat en una pala bivalva activada per un cilindre hidràulic que utilitza com a bancada una estructura que a l'hora fa la funció de xassís

Disseny d'una equilibradora de rotors per a ús didàctic

El Laboratori de Mecànica de l’Escola Politècnica Superior disposa d’una màquina equilibradora de rotors. El projecte consisteix a fer un nou disseny de l’equilibradora i els seus components, realitzar tots els càlculs necessaris per assegurar-ne el bon funcionament i pressupostar la màquina per si, en un futur, es creu convenient construir-la. A l’hora de fer aquest nou disseny s’ha mantingut un principi de funcionament i un manteniment el més senzill possible. També s’ha procurat que l’aparell tingui una gran flexibilitat a l’hora de plantejar casos pràctics, ja que la finalitat d’aquesta equilibradora de rotors és realitzar pràctiques de laboratori. Pel que fa a la part mecànica s’ha hagut d’assegurar una bona transmissió de moviment entre el motor i el rotor, i garantir una bona lectura dels aparells de mesura. El fet de ser un aparell d’ús docent ha fet que es donés molta importància a la seguretat

Disseny del capçal d'un molinet motoritzat per a realitzar extractes de plantes en el sector de la indústria farmacèutica

Una empresa de la indústria farmacèutica vol comercialitzar càpsules elaborades amb plantes medicinals. El procés a seguir per a aconseguir el producte final es realitza mitjançant un molí motoritzat que consta d’unes ganivetes, la funció de les quals és triturar les fulles de les plantes prèviament seleccionades a unes mides realment minúscules, de tal manera que llavors es puguin introduir dins les càpsules. Actualment el procés de trituració es realitza aproximadament a 3.000 rpm i en intentar assolir majors velocitats de treball el capçal de la màquina no les aguanta, cedint un o més dels seus components, patint sobretot l’eix de transmissió i els rodaments, que en ocasions acaben trencant-se. Per a intentar resoldre aquest problema, l’empresa subministradora de maquinària industrial es planteja la viabilitat d’un nou prototipus. La primera mesura que es proposa al client per a solucionar el problema derivat d’aquest augment de la producció és dissenyar un nou capçal del molí motoritzat perquè pugui treballar a velocitats superiors, aproximadament de 18.000 r.p.m, que significaria un canvi total de la transmissió de la màquina

A structure excited by a DC motor of limited power supply and controlled by a pendulum like device

In this paper, a mathematical model is derived via Lagrange's Equation for a shear building structure that acts as a foundation of a non-ideal direct current electric motor, controlled by a mass loose inside a circular carving. Non-ideal sources of vibrations of structures are those whose characteristics are coupled to the motion of the structure, not being a function of time only as in the ideal case. Thus, in this case, an additional equation of motion is written, related to the motor rotation, coupled to the equation describing the horizontal motion of the shear building. This kind of problem can lead to the so-called Sommerfeld effect: steady state frequencies of the motor will usually increase as more power (voltage) is given to it in a step-by-step fashion. When a resonance condition with the structure is reached, the better part of this energy is consumed to generate large amplitude vibrations of the foundation without sensible change of the motor frequency as before. If additional increase steps in voltage are made, one may reach a situation where the rotor will jump to higher rotation regimes, no steady states being stable in between. As a device of passive control of both large amplitude vibrations and the Sommerfeld effect, a scheme is proposed using a point mass free to bounce back and forth inside a circular carving in the suspended mass of the structure. Numerical simulations of the model are also presented Copyright © 2007 by ASME.

A case study of concurrent engineering application on the development of parts for the white goods industry in Brazil

This classical way to manage product development processes for massive production seems to be changing: high pressure for cost reduction, higher quality standards, markets reaching for innovation lead to the necessity of new tools for development control. Into this, and learning from the automotive and aerospace industries factories from other segments are starting to understand and apply manufacturing and assembly oriented projects to ease the task of generate goods and from this obtain at least a part of the expected results. This paper is intended to demonstrate the applicability of the concepts of Concurrent Engineering and DFM/DFA (Design for Manufacturing and Assembly) in the development of products and parts for the White Goods industry in Brazil (major appliances as refrigerators, cookers and washing machines), showing one case concerning the development and releasing of a component. Finally is demonstrated in a short term how was reached a solution that could provide cost savings and reduction on the time to delivery using those techniques.

Networked control system for the guidance of a four-wheel steering agricultural robotic platform

A current trend in the agricultural area is the development of mobile robots and autonomous vehicles for precision agriculture (PA). One of the major challenges in the design of these robots is the development of the electronic architecture for the control of the devices. In a joint project among research institutions and a private company in Brazil a multifunctional robotic platform for information acquisition in PA is being designed. This platform has as main characteristics four-wheel propulsion and independent steering, adjustable width, span of 1,80m in height, diesel engine, hydraulic system, and a CAN-based networked control system (NCS). This paper presents a NCS solution for the platform guidance by the four-wheel hydraulic steering distributed control. The control strategy, centered on the robot manipulators control theory, is based on the difference between the desired and actual position and considering the angular speed of the wheels. The results demonstrate that the NCS was simple and efficient, providing suitable steering performance for the platform guidance. Even though the simplicity of the NCS solution developed, it also overcame some verified control challenges in the robot guidance system design such as the hydraulic system delay, nonlinearities in the steering actuators, and inertia in the steering system due the friction of different terrains. Copyright © 2012 Eduardo Pacincia Godoy et al.

Bioengineering of exercise: biomechanical and metabolic aspects

The field of research of this dissertation concerns the bioengineering of exercise, in particular the relationship between biomechanical and metabolic knowledge. This relationship can allow to evaluate exercise in many different circumstances: optimizing athlete performance, understanding and helping compensation in prosthetic patients and prescribing exercise with high caloric consumption and minimal joint loading to obese subjects. Furthermore, it can have technical application in fitness and rehabilitation machine design, predicting energy consumption and joint loads for the subjects who will use the machine. The aim of this dissertation was to further understand how mechanical work and metabolic energy cost are related during movement using interpretative models. Musculoskeletal models, when including muscle energy expenditure description, can be useful to address this issue, allowing to evaluate human movement in terms of both mechanical and metabolic energy expenditure. A whole body muscle-skeletal model that could describe both biomechanical and metabolic aspects during movement was identified in literature and then was applied and validated using an EMG-driven approach. The advantage of using EMG driven approach was to avoid the use of arbitrary defined optimization functions to solve the indeterminate problem of muscle activations. A sensitivity analysis was conducted in order to know how much changes in model parameters could affect model outputs: the results showed that changing parameters in between physiological ranges did not influence model outputs largely. In order to evaluate its predicting capacity, the musculoskeletal model was applied to experimental data: first the model was applied in a simple exercise (unilateral leg press exercise) and then in a more complete exercise (elliptical exercise). In these studies, energy consumption predicted by the model resulted to be close to energy consumption estimated by indirect calorimetry for different intensity levels at low frequencies of movement. The use of muscle skeletal models for predicting energy consumption resulted to be promising and the use of EMG driven approach permitted to avoid the introduction of optimization functions. Even though many aspects of this approach have still to be investigated and these results are preliminary, the conclusions of this dissertation suggest that musculoskeletal modelling can be a useful tool for addressing issues about efficiency of movement in healthy and pathologic subjects.

Development of a grid connected micro wind generator. A practical activity for the course on electric generation with wind energy

This paper describes a practical activity, part of the renewable energy course where the students have to build their own complete wind generation system, including blades, PM-generator, power electronics and control. After connecting the system to the electric grid the system has been tested during real wind scenarios. The paper will describe the electric part of the work surface-mounted permanent magnet machine design criteria as well as the power electronics part for the power control and the grid connection. A Kalman filter is used for the voltage phase estimation and current commands obtained in order to control active and reactive power. The connection to the grid has been done and active and reactive power has been measured in the system.

Die Maschinen-Elemente, ihre Berechnung und Konstruktion mit Rücksicht auf die neuern Versuche,

Bibliographical footnotes.

Technical data on Soviet heavy machinery.

"CSO DC-1942."

The experimental stress analysis of the Firestone type R-5⁰, 20 x 75 truck rim.

Vols. 2-3 have title: The experimental stress analysis of truck rims.