Multimedia Standards

The aim of this paper is to review some of the standards, connected with multimedia and their metadata. We start with MPEG family. MPEG-21 provides an open framework for multimedia delivery and consumption. MPEG- 7 is a multimedia content description standard. With the Internet grow several format were proposed for media scenes description. Some of them are open standards such as: VRML1, X3D2, SMIL3, SVG4, MPEG-4 BIFS, MPEG-4, XMT, MPEG-4, LaSER, COLLADA5, published by ISO, W3C, etc. Television has become the most important mass medium. Standards such as MHEG, DAVIC, Java TV, MHP, GEM, OCAP and ACAP have been developed. Efficient video-streaming is presented. There exist a large number of standards for representing audiovisual metadata. We cover the Material Exchange Format (MXF), the Digital Picture Exchange (DPX), and the Digital Cinema Package (DCP).

Global compilation of benthic data sets I

Approaches to quantify the organic carbon accumulation on a global scale generally do not consider the small-scale variability of sedimentary and oceanographic boundary conditions along continental margins. In this study, we present a new approach to regionalize the total organic carbon (TOC) content in surface sediments (<5 cm sediment depth). It is based on a compilation of more than 5500 single measurements from various sources. Global TOC distribution was determined by the application of a combined qualitative and quantitative-geostatistical method. Overall, 33 benthic TOC-based provinces were defined and used to process the global distribution pattern of the TOC content in surface sediments in a 1°x1° grid resolution. Regional dependencies of data points within each single province are expressed by modeled semi-variograms. Measured and estimated TOC values show good correlation, emphasizing the reasonable applicability of the method. The accumulation of organic carbon in marine surface sediments is a key parameter in the control of mineralization processes and the material exchange between the sediment and the ocean water. Our approach will help to improve global budgets of nutrient and carbon cycles.

Bridging Perspectives

People’s ability to change their social and economic circumstances may be constrained by various forms of social, cultural and political domination. Thus to consider a social actor’s particular lifeworld in which the research is embedded assists in the understanding of how and why different trajectories of change occur or are hindered and how those changes fundamentally affect livelihood opportunities and constraints. In seeking to fulfill this condition this thesis adopted an actor-oriented approach to the study of rural livelihoods. A comprehensive livelihoods study requires grasping how social reality is being historically constituted. That means to understand how the interaction of modes of production and symbolical reproduction produces the socio-space. Research is here integrated to action through the facilitation of farmer groups. The overall aim of the groups was to prompt agency, as essential conditions to build more resilient livelihoods. The smallholder farmers in the Mabalane District of Mozambique are located in a remote semi-arid area. Their livelihoods customarily depend at least as much on livestock as on (mostly) rain-fed food crops. Increased climate variability exerts pressure on the already vulnerable production system. An extensive 10-month duration of participant observation divided into 3 periods of fieldwork structured the situated multi-method approach that drew on a set of interview categories. The actor-oriented appraisal of livelihoods worked in building a mutually shared definition of the situation. This reflection process was taken up by the facilitation of the farmer groups, one in Mabomo and one in Mungazi, which used an inquiry iteratively combining individual interviews and facilitated group meetings. Integration of action and reflection was fundamental for group constitution as spaces for communicative action. They needed to be self-organized and to achieve understanding intersubjectively, as well as to base action on cooperation and coordination. Results from this approach focus on how learning as collaboratively generated was enabled, or at times hindered, in (a) selecting meaningful options to test; (b) in developing mechanisms for group functioning; and (c) in learning from steering the testing of options. The study of livelihoods looked at how the different assets composing livelihoods are intertwined and how the increased severity of dry spells is contributing to escalated food insecurity. The reorganization of the social space, as households moved from scattered homesteads to form settlements, further exerts pressure on the already scarce natural resource-based livelihoods. Moreover, this process disrupted a normative base substantiating the way that the use of resources is governed. Hence, actual livelihood strategies and response mechanisms turn to diversification through income-generating activities that further increase pressure on the resource-base in a rather unsustainable way. These response mechanisms are, for example, the increase in small-livestock keeping, which has easier conversion to cash, and charcoal production. The latter results in ever more precarious living and working conditions. In the majority of the cases such responses are short-term and reduce future opportunities in a downward spiral of continuously decreasing assets. Thus, by indicating the failure of institutions in the mediation of smallholders’ adaptive capabilities, the livelihood assessment in Mabomo and Mungazi sheds light on the complex underlying structure of present day social vulnerability, linking the macro-context to the actual situation. To assist in breaking this state of “subordination”, shaped by historical processes, weak institutions and food insecurity, the chosen approach to facilitation of farmer groups puts farmer knowledge at the center of an evolving process of intersubjective co-construction of knowledge towards emancipation.

Analysis of the Market Potential of Syrian Organic Fruit and Vegetables for Exports to Germany

Syria has been a major producer and exporter of fresh fruit and vegetables (FFV) in the Arabic region. Prior to 2011, Syrian FFV were mainly exported to the neighbouring countries, the Gulf States and Northern Africa as well as to Eastern European countries. Although the EU is potentially one of the most profitable markets of high quality FFV (such as organic ones) in the world, Syrian exports of FFV to Western European countries like Germany have been small. It could be a lucrative opportunity for Syrian growers and exporters of FFV to export organic products to markets such as Germany, where national production is limited to a few months due to climatic conditions. Yet, the organic sector in Syria is comparatively young and only a very small area of FFV is certified according to EU organic regulations. Up to the author’s knowledge, little was known about Syrian farmers’ attitudes towards organic FFV production. There was also no study so far that explored and analysed the determining factors for organic FFV adoption among Syrian farmers as well as the exports of these products to the EU markets. The overarching aim of the present dissertation focused on exploring and identifying the market potential of Syrian exports of organic FFV to Germany. The dissertation was therefore concerned with three main objectives: (i) to explore if German importers and wholesalers of organic FFV see market opportunities for Syrian organic products and what requirements in terms of quality and quantity they have, (ii) to determine the obstacles Syrian producers and exporters face when exporting agricultural products to Germany, and (iii) to investigate whether Syrian farmers of FFV can imagine converting their farms to organic production as well as the underlying reasons why they do so or not. A twofold methodological approach with expert interviews and a farmer survey were used in this dissertation to address the abovementioned objectives. While expert interviews were conducted with German and Syrian wholesalers of (organic) FFV in 2011 (9 interviews each), the farmer survey was administrated with 266 Syrian farmers of FFV in the main region for the production of FFV (i.e. the coastal region) from November 2012 till May 2013. For modelling farmers’ decisions to adopt organic farming, the Theory of Planned Behaviour as theoretical framework and Partial Least Squares Structural Equation Modelling as the main method for data analysis were used in this study. The findings of this dissertation yield implications for the different stakeholders (governmental institutions and NGOs, farmers, exporters, wholesalers, etc.) who are interested in prompting the Syrian export of organic products. Based on the empirical results and a literature review, an action plan to promote Syrian production and export of organic products was developed which can help in the post-war period in Syria at improving the organic sector.

Diseño de un modelo de abastecimiento de insumos para la gestión de compras de la empresa Salsas Aderezos S.A.

El proceso de abastecimiento de materiales y/o productos en las empresas, ya sean productoras, comercializadoras o incluso prestadora de servicios, es la base para que éstas lleven a cabalidad el cumplimiento de sus objetivos y satisfagan el mercado al cual pertenecen, para así obtener rentabilidad; es por esto, que la logística juega un papel muy importante en cada uno de los pasos a seguir en el proceso de compra y distribución de productos, pues es la encargada que dichos procesos se cumplan de manera eficaz y rápida, en búsqueda de una disminución en los costos y el futuro alcance de una ventaja competitiva para la empresa. Este trabajo es elaborado como requisito de grado y busca mostrar los diferentes procesos logísticos que se llevan a cabo en la empresa SALSAS Y ADEREZOS S.A, para el correcto abastecimiento de sus productos, realizando primero una revisión a la teoría de inventarios y de los pasos a seguir para que este abastecimiento se pueda llevar a cabo correctamente. Por último, se expondrán algunos de los cambios realizados para llevar a cabo un mejor control en el manejo de los inventarios y dar algunas recomendaciones de futuras posibles mejoras que podrían realizarse.

Options for poverty reduction through community empowerment towards sustainable fisheries resource production and equity

The current situation is that, by any measure, most fisheries worldwide are fully over exploited. This is also true of the Uganda's fisheries where the effort needed to catch fish has increased, and the average size of fish and of stocks have both declined. A productive fisheries offers many benefits: food for local consumption; raw materials for industry; employment that generates income, which in turn encourages other industrial, commercial and service activities; export markets that can be identified and met to generate hard currency, The national economy also benefits from import substitution and·opportunities for increased taxation. But for fisheries to be productive it is not enough to produce, products must be marketed. Fishers have to learn the lesson that it is no longer enough to expect production to drive the market; success will come from producing what the market demands. It is hoped that co-management can play a big role in harnessing the various energies for sustainable development and management of the fisheries resources.

Integrated soil fertility management in eastern and western Africa: The role of knowledge and innovation systems, its adoption and impact

The rise in population growth, as well as nutrient mining, has contributed to low agricultural productivity in Sub-Saharan Africa (SSA). A plethora of technologies to boost agricultural production have been developed but the dissemination of these agricultural innovations and subsequent uptake by smallholder farmers has remained a challenge. Scientists and philanthropists have adopted the Integrated Soil Fertility Management (ISFM) paradigm as a means to promote sustainable intensification of African farming systems. This comparative study aimed: 1) To assess the efficacy of Agricultural Knowledge and Innovation Systems (AKIS) in East (Kenya) and West (Ghana) Africa in the communication and dissemination of ISFM (Study I); 2) To investigate how specifically soil quality, and more broadly socio-economic status and institutional factors, influence farmer adoption of ISFM (Study II); and 3) To assess the effect of ISFM on maize yield and total household income of smallholder farmers (Study III). To address these aims, a mixed methodology approach was employed for study I. AKIS actors were subjected to social network analysis methods and in-depth interviews. Structured questionnaires were administered to 285 farming households in Tamale and 300 households in Kakamega selected using a stratified random sampling approach. There was a positive relationship between complete ISFM awareness among farmers and weak knowledge ties to both formal and informal actors at both research locations. The Kakamega AKIS revealed a relationship between complete ISFM awareness among farmers and them having strong knowledge ties to formal actors implying that further integration of formal actors with farmers’ local knowledge is crucial for the agricultural development progress. The structured questionnaire was also utilized to answer the query pertaining to study II. Soil samples (0-20 cm depth) were drawn from 322 (Tamale, Ghana) and 459 (Kakamega, Kenya) maize plots and analysed non-destructively for various soil fertility indicators. Ordinal regression modeling was applied to assess the cumulative adoption of ISFM. According to model estimates, soil carbon seemed to preclude farmers from intensifying input use in Tamale, whereas in Kakamega it spurred complete adoption. This varied response by farmers to soil quality conditions is multifaceted. From the Tamale perspective, it is consistent with farmers’ tendency to judiciously allocate scarce resources. Viewed from the Kakamega perspective, it points to a need for farmers here to intensify agricultural production in order to foster food security. In Kakamega, farmers with more acidic soils were more likely to adopt ISFM. Other household and farm-level factors necessary for ISFM adoption included off-farm income, livestock ownership, farmer associations, and market inter-linkages. Finally, in study III a counterfactual model was used to calculate the difference in outcomes (yield and household income) of the treatment (ISFM adoption) in order to estimate causal effects of ISFM adoption. Adoption of ISFM contributed to a yield increase of 16% in both Tamale and Kakamega. The innovation affected total household income only in Tamale, where ISFM adopters had an income gain of 20%. This may be attributable to the different policy contexts under which the two sets of farmers operate. The main recommendations underscored the need to: (1) improve the functioning of AKIS, (2) enhance farmer access to hybrid maize seed and credit, (3) and conduct additional multi-locational studies as farmers operate under varying contexts.

The knowledge exchange intermediary as service provider : a discussion and an Australian case

The critical impact of innovation on national and the global economies has been discussed at length in the literature. Economic development requires the diffusion of innovations into markets. It has long been recognised that economic growth and development depends upon a constant stream of innovations. Governments have been keenly aware of the need to ensure this flow does not dry to a trickle and have introduced many and varied industry policies and interventions to assist in seeding, supporting and diffusing innovations. In Australia, as in many countries, Government support for the transfer of knowledge especially from publicly funded research has resulted in the creation of knowledge exchange intermediaries. These intermediaries are themselves service organisations, seeking innovative service offerings for their markets. The choice for most intermediaries is generally a dichotomous one, between market-pull and technology-push knowledge exchange programmes. In this article, we undertake a case analysis of one such innovative intermediary and its flagship programme. We then compare this case with other successful intermediaries in Europe. We put forward a research proposition that the design of intermediary programmes must match the service type they offer. That is, market-pull programmes require market-pull design, in close collaboration with industry, whereas technology programmes can be problem-solving innovations where demand is latent. The discussion reflects the need for an evolution in knowledge transfer policies and programmes beyond the first generation ushered in with the US Bayh-Dole Act (1980) and Stevenson-Wydler Act (1984). The data analysed is a case study comparison of market-pull and technology-push programmes, focusing on primary and secondary socio-economic benefits (using both Australian and international comparisons).

A survey on six sigma implementation in Singapore service industries

The concept of Six Sigma was initiated in the 1980s by Motorola. Since then it has been implemented in several manufacturing and service organizations. In case of services, health care and finance were major beneficiaries till now. The application of Six Sigma is gradually picking up in other services like; call centers, utilities and public services. This paper provides empirical evidence on Six Sigma implementation in service industries in Singapore. By using a sample size of 50 service organizations (10 responses are from organizations which have implemented Six Sigma), the paper helps in understanding the status of Six Sigma in service organizations in Singapore. The findings confirm the inclusion of critical success factors, critical to quality characteristics, tools and key performance indicators as observed from the literature. The revelation of “not relevant” as a reason for not implementing Six Sigma shows the need for understanding specific requirements of service organizations before its application.

Developing a framework for Six Sigma in financial service institutions : empirical evidence from expert interviews

Six Sigma is considered to be an important management philosophy to obtain satisfied customers. But financial service organisations have been slow to adopt Six Sigma issues so far. Despite the extensive effort that has been invested and benefits that can be obtained, the systematic implementation of Six Sigma in financial service organisations is limited. As a company wide implementation framework is missing so far, this paper tries to fill this gap. Based on theory, a conceptual framework is developed and evaluated by experts from financial institutions. The results show that it is very important to link Six Sigma with the strategic as well as the operations level. Furthermore, although Six Sigma is a very important method for improving quality of processes others such as Lean Management are also used This requires a superior project portfolio management to coordinate resources and projects of Six Sigma with the other methods used. Beside the theoretical contribution, the framework can be used by financial service companies to evaluate their Six Sigma activities. Thus, the framework grounded through literature and empirical data will be a useful guide for sustainable and successful implementation of a Six Sigma initiative in financial service organisations.

Developing a creative cluster in a post-industrial city : the Creative Industries Development Service (CIDS) and Manchester

This article takes the establishment and demise of Manchester’s Creative Industries Development Service (CIDS) as an exemplary case study for the ways in which creative industry policy has intersected with urban economic policy over the last decade. The authors argue that the creative industries required specific kinds of economic development agencies that would be able to act as “intermediaries” between the distinct languages of policymakers and “creatives.” They discuss the tensions inherent in such an approach and how CIDS attempted to manage them and suggest that the main reason for the demise of the CIDS was the domination of the “economic” over the “cultural” logic, both of which are present within the creative industries policy discourse.

Customer Needing - Conceptualising Industrial Service from a Customer Perspective

Views on industrial service have conceptually progressed from the output of the provider’s production process to the result of an interaction process in which the customer also is involved. Although there are attempts to be customer-oriented, especially when the focus is on solutions, an industrial company’s offering combining goods and services is inherently seller-oriented. There is, however, a need to go beyond the current literature and company practices. We propose that what is needed is a genuinely customer-based parallel concept to offering that takes the customer’s view and put forward a new concept labelled customer needing. A needing is based on the customer’s mental model of their business and strategies which will affect priorities, decisions, and actions. A needing can be modelled as a configuration of three dimensions containing six functions that create realised value for the customer. These dimensions and functions can be used to describe needings which represent starting points for sellers’ creation of successful offerings. When offerings match needings over time the seller should have the potential to form and sustain successful buyer relationships.

Re-Conceptualizing Value-Creation From Industrial Business Logic to Service Business Logic

There is an urgent interest in marketing to move away from neo-classical value definitions suggesting that value creation is a process of exchanging goods for money. In the present paper, value creation is conceptualized as an integration of two distinct, yet closely coupled processes. First, actors co-create what this paper calls an underlying basis of value. This is done by interactively re-configuring resources. By relating and combining resources, activity sets, and risks across actor boundaries in novel ways actors create joint productivity gains – a concept very similar to density (Normann, 2001). Second, actors engage in a process of signification and evaluation. Signification implies co-constructing the meaning and worth of joint productivity gains co-created through interactive resource re-configuration, as well as sharing those gains through a pricing mechanism as value to involved actors. The conceptual framework highlights an all-important dynamics associated with ´value creation´ and ´value´ - a dynamics the paper claims has eluded past marketing research. The paper argues that the framework presented here is appropriate for the interactive service perspective, where value and value creation are not objectively given, but depend on the power of involved actors´ socially constructed frames to mobilize resources across actor boundaries in ways that ´enhance system well-being´ (Vargo et al., 2008). The paper contributes to research on Service Logic, Service-Dominant Logic, and Service Science.

Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.  

Mid-Century Molecular: The Material Culture of X-ray Crystallographic Visualisation across Postwar British Science and Industrial Design

This thesis investigates the use and significance of X-ray crystallographic visualisations of molecular structures in postwar British material culture across scientific practice and industrial design. It is based on research into artefacts from three areas: X-ray crystallographers’ postwar practices of visualising molecular structures using models and diagrams; the Festival Pattern Group scheme for the 1951 Festival of Britain, in which crystallographic visualisations formed the aesthetic basis of patterns for domestic objects; and postwar furnishings with a ‘ball-and-rod’ form and construction reminiscent of those of molecular models. A key component of the project is methodological. The research brings together subjects, themes and questions traditionally covered separately by two disciplines, the history of design and history of science. This focus necessitated developing an interdisciplinary set of methods, which results in the reassessment of disciplinary borders and productive cross-disciplinary methodological applications. This thesis also identifies new territory for shared methods: it employs network models to examine cross-disciplinary interaction between practitioners in crystallography and design, and a biographical approach to designed objects that over time became mediators of historical narratives about science. Artefact-based, archival and oral interviewing methods illuminate the production, use and circulation of the objects examined in this research. This interdisciplinary approach underpins the generation of new historical narratives in this thesis. It revises existing histories of the cultural transmissions between X-ray crystallography and the production and reception of designed objects in postwar Britain. I argue that these transmissions were more complex than has been acknowledged by historians: they were contingent upon postwar scientific and design practices, material conditions in postwar Britain and the dynamics of historical memory, both scholarly and popular. This thesis comprises four chapters. Chapter one explores X-ray crystallographers’ visualisation practices, conceived here as a form of craft. Chapter two builds on this, demonstrating that the Festival Pattern Group witnesses the encounter between crystallographic practice, design practice and aesthetic ideologies operating within social networks associated with postwar modernisms. Chapters three and four focus on ball-and-rod furnishings in postwar and present-day Britain, respectively. I contend that strong relationships between these designed objects and crystallographic visualisations, for example the appellation ‘atomic design’, have been largely realised through historical narratives active today in the consumption of ‘retro’ and ‘mid-century modern’ artefacts. The attention to contemporary historical narratives necessitates this dual historical focus: the research is rooted in the period from the end of the Second World War until the early 1960s, but extends to the history of now. This thesis responds to the need for practical research on methods for studying cross-disciplinary interactions and their histories. It reveals the effects of submitting historical subjects that are situated on disciplinary boundaries to interdisciplinary interpretation. Old models, such as that of unidirectional ‘influence’, subside and the resulting picture is a refracted one: this study demonstrates that the material form and meaning of crystallographic visualisations, within scientific practice and across their use and echoes in designed objects, are multiple and contingent.