Factors affecting the establishment and dispersal of nymphs of Pristhesancus plagipennis Walker (Hemiptera : Reduviidae) when released onto soybean, cotton and sunflower crops

A problem with augmenting predatory bugs through mass release is the logistical difficulty of delivering nymphs onto the foliage of field crops. In this paper we examine postrelease establishment and dispersal of the nymphs of the predatory bug Pristhesancus plagipennis on soybean, cotton and sunflower in an effort to devise an appropriate strategy for field release. The effects of predator stadia and release rates on field establishment and within-crop-canopy dispersal after hand release were recorded in soybean, cotton and sunflower. Field establishment improved with the release of more-developed nymphs, with third instars providing the most appropriate compromise between field hardiness and rearing cost. Increased nymphal density at the point of release had little effect on nymphal dispersal throughout the crop canopy. The patterns of nymphal dispersal observed on the three crops suggest that crop-canopy architecture may have an effect on the ability of nymphs to spread out postrelease, as nymphs dispersed poorly in cotton and sunflower compared to soybean. To overcome poor dispersal of nymphs after release, a mechanical release method, where nymphs were mixed with vermiculite and delivered onto a target crop through a spinning disk fertiliser spreader, was tested, and provided similar nymph establishment rates and dispersal patterns as releasing nymphs individually by hand. The implications of nymph dispersal and field hardiness in regard to inundative field release techniques are discussed.

2,6,,9-trioxabicyclo[3.3.1]nona-3,7-dienes and 2,4,6,8-tetraoxaadamantanes: Novel chiral spacer units in macrocyclic polyethers

The unusual chiral heterocyclic systems, trioxabicyclo[3.3.1]nona-3,7-dienes (bridged bisdioxines), are incorporated as novel spacer molecules into macrocyclic polyether ring systems of various sizes (8, 9 as well as 11-15) by cyclocondensation reaction of the! bisacid chloride 4b or bisesters 6,7 and 10, with several ethylene glycols. The 2:2 macrocycles 12-14 are obtained in approximately 50:50 mixtures of diastereomers. These conclusions are mainly based on HPLC data presented in Table I as well as X-ray analyses of (1R,5R)-8c (space group Pbca, a = 10.163(3) Angstrom, b = 18.999(4) Angstrom, c = 36.187(10) Angstrom, V = 6987(3) Angstrom(3), Z = 8, d(calc) = 1.218 g cm(-3), 6974 reflections, R = 0.0553.), mesolrac-11 (space group P (1) over bar, a = 10.472(5) Angstrom, b = 16.390(5) Angstrom, c = 17.211(5) Angstrom, alpha = 98.69(2)degrees, beta = 93.04(2)degrees, gamma = 98.52(2)degrees, V = 2879.3(18) Angstrom(3), Z = 2, d(calc) = 1.173 g cm(-3), 11,162 reflections, R = 0.0945) and meso-12 (space group P2(1)/c, a = 9.927(2), b = 18.166(3), c = 17.820(3) Angstrom, beta = 96.590(10)degrees, V = 3192.3(10)Angstrom(3), Z = 4, D-c = 1.109 g cm(-3), 3490 reflections, R = 0.0646). The 1:1 macrocycles 8b,c are also formed by intramolecular transesterification of the open-chain bisesters 7b,c and their formation is favored by the use of metal ions as templates. The bridged bisdioxine moieties in 8b and 12 are converted into the corresponding chiral tetra-oxaadamantane spacers to afford macrocycles 16 and 17. Preliminary metal ion complexation studies with selected species (8c, 11-14) were also performed.

Two-dimensional balanced sampling plans excluding contiguous units

A balanced sampling plan excluding contiguous units (or BSEC for short) was first introduced by Hedayat, Rao and Stufken in 1988. These designs can be used for survey sampling when the units are arranged in one-dimensional ordering and the contiguous units in this ordering provide similar information. In this paper, we generalize the concept of a BSEC to the two-dimensional situation and give constructions of two-dimensional BSECs with block size 3. The existence problem is completely solved in the case where lambda = 1.

High dependency units: Issues to consider in their planning

This review discusses the issues to be considered in establishing new or extending existing high dependency unit (HDU) services. A defined high dependency service becomes cost-effective when patient care requires more than one nurse for three patients. Professional guidelines for HDUs vary and there are no national accreditation criteria. Casemix and service delivery specifications for the HDU need to be defined and agreed upon within the institution. Establishing a new HDU service requires changes to care delivery. Many potential HDU patients are currently managed in general wards or in the intensive care unit. The service should be discussed widely and marketed within the institution, and the development of defined working relationships with the ICU and primary care teams oil the wards is mandatory.

Dispersal patterns in a regional koala population in south-east Queensland

Koala dispersal was investigated as part of a detailed ecological study of a nationally significant koala population located 20 km south-east of Brisbane, Queensland. From 1996 to 2000, 195 koalas from three sites were captured and fitted with radio-collars. A total of 40 koalas ( 23 males and 17 females) dispersed from these sites. Most (93%) dispersing individuals were 20 - 36 months of age. Three adult females ( more than 36 months old) dispersed and no adult males dispersed during the study. A significantly higher proportion of young males dispersed than females. Dispersal occurred between June and December, with most dispersal of males commencing in July and August and that of females commencing between September and November prior to, and early in, the annual breeding season. The mean straight-line distance between the natal and breeding home ranges for males and females was similar and was measured at 3.5 km ( range 1.1 - 9.7 km) and 3.4 km ( range 0.3 - 10.6 km) respectively. Dispersing males and females tended to successfully disperse south and west of their natal home ranges and were generally unable to successfully disperse to urban areas within the study area, as a high proportion of the mortality of dispersing koalas was associated with attacks by domestic dogs and with collisions with vehicles on roads. Information from other studies indicates that most young koalas disperse from their natal areas. It is likely that the social behaviour and mating systems of koala populations provide mechanisms for young koalas to disperse. The potential role of dispersal in the dynamics of regional koala populations is discussed.

Divorce, dispersal and incest avoidance in the cooperatively breeding superb fairy-wren Malurus cyaneus

1. Between 1988 and 2001, we studied social relationships in the superb fairy-wren Malurus cyaneus (Latham), a cooperative breeder with male helpers in which extra-group fertilizations are more common than within-pair fertilizations. 2. Unlike other fairy-wren species, females never bred on their natal territory. First-year females dispersed either directly from their natal territory to a breeding vacancy or to a foreign 'staging-post' territory where they spent their first winter as a subordinate. Females dispersing to a foreign territory settled in larger groups. Females on foreign territories inherited the territory if the dominant female died, and were sometimes able to split the territory into two by pairing with a helper male. However, most dispersed again to obtain a vacancy. 3. Females dispersing from a staging post usually gained a neighbouring vacancy, but females gaining a vacancy directly from their natal territory travelled further, perhaps to avoid pairing or mating with related males. 4. Females frequently divorced their partner, although the majority of relationships were terminated by the death of one of the pair. If death did not intervene, one-third of pairings were terminated by female-initiated divorce within 1000 days. 5. Three divorce syndromes were recognized. First, females that failed to obtain a preferred territory moved to territories with more helpers. Secondly, females that became paired to their sons when their partner died usually divorced away from them. Thirdly, females that have been in a long relationship divorce once a son has gained the senior helper position. 6. Dispersal to avoid pairing with sons is consistent with incest avoidance. However, there may be two additional benefits. Mothers do not mate with their sons, so dispersal by the mother liberates her sons to compete for within-group matings. Further, divorcing once their son has become a breeder or a senior helper allows the female to start sons in a queue for dominance on another territory. Females that do not take this option face constraints on their ability to recruit more sons into the local neighbourhood.

Stratigraphy, facies architecture and tectonic implications of the Upper Devonian to Lower Carboniferous Campwyn Volcanics of the northern New England Fold Belt

Upper Devonian to Lower Carboniferous strata of the Campwyn Volcanics of east central Queensland preserve a substantial sequence of first-cycle volcaniclastic sedimentary and coeval volcanic rocks that record prolonged volcanic activity along the northern New England Fold Belt. The style and scale of volcanism varied with time, producing an Upper Devonian sequence of mafic volcano-sedimentary rocks overlain by a rhyolitic ignimbrite-dominated sequence that passes upward into a Lower Carboniferous limestone-bearing sedimentary sequence. We define two facies associations for the Campwyn Volcanics. A lower facies association is dominated by mafic volcanic-derived sedimentary breccias with subordinate primary mafic volcanic rocks comprising predominantly hyaloclastite and peperite. Sedimentary breccias record episodic and high energy, subaqueous depositional events with clastic material sourced from a mafic lava-dominated terrain. Some breccias contain a high proportion of attenuated dense, glassy mafic juvenile clasts, suggesting a syn-eruptive origin. The lower facies association coarsens upwards from a lithic sand-dominated sequence through a thick interval of pebble- to boulder-grade polymict volcaniclastic breccias, culminating in facies that demonstrate subaerial exposure. The silicic upper facies association marks a significant change in eruptive style, magma composition and the nature of eruptive sources, as well as the widespread development of subaerial depositional conditions. Crystal-rich, high-grade, low- to high-silica rhyolite ignimbrites dominate the base of this facies association. Biostratigraphic age controls indicate that the ignimbrite-bearing sequences are Famennian to lower-mid Tournaisian in age. The ignimbrites represent extra-caldera facies with individual units up to 40 m thick and mostly lacking coarse lithic breccias. Thick deposits of pyroclastic material interbedded with fine-grained siliceous sandstone and mudstone (locally radiolarian-bearing) were deposited from pyroclastic flows that crossed palaeoshorelines or represent syn-eruptive, resedimented pyroclastic material. Some block-bearing lithic-pumice-crystal breccias may also reflect more proximal subaqueous silicic explosive eruptions. Crystal-lithic sandstones interbedded with, and overlying the ignimbrites, contain abundant detrital volcanic quartz and feldspar derived from the pyroclastic deposits. Limestone is common in the upper part of the upper facies association, and several beds are oolitic (cf. Rockhampton Group of the Yarrol terrane). Overall, the upper facies association fines upward and is transgressive, recording a return to shallow-marine conditions. Palaeocurrent data from all stratigraphic levels in the Campwyn Volcanics indicate that the regional sediment-dispersal direction was to the northwest, and opposed to the generally accepted notion of easterly sediment dispersal from a volcanic arc source. The silicic upper facies association correlates in age and lithology to Early Carboniferous silicic volcanism in the Drummond (Cycle 1) and Burdekin Basins, Connors Arch, and in the Yarrol terranes of eastern Queensland. The widespread development of silicic volcanism in the Early Carboniferous indicates that silicic (rift-related) magmatism was not restricted to the Drummond Basin, but was part of a more substantial silicic igneous province.

Scheduling of head-dependent cascaded reservoirs considering discharge ramping constraints and start/stop of units

This paper is on the problem of short-term hydro scheduling (STHS), particularly concerning head-dependent reservoirs under competitive environment. We propose a novel method, based on mixed-integer nonlinear programming (MINLP), for optimising power generation efficiency. This method considers hydroelectric power generation as a nonlinear function of water discharge and of the head. The main contribution of this paper is that discharge ramping constraints and start/stop of units are also considered, in order to obtain more realistic and feasible results. The proposed method has been applied successfully to solve two case studies based on Portuguese cascaded hydro systems, providing a higher profit at an acceptable computation time in comparison with classical optimisation methods based on mixed-integer linear programming (MILP).

Comparison of fungal contamination between hospitals and companies food units

A descriptive study was developed to compare air and surfaces fungal contamination in ten hospitals’ food units and two food units from companies. Fifty air samples of 250 litres through impaction method were collected from hospitals’ food units and 41 swab samples from surfaces were also collected, using a 10 by 10 cm square stencil. Regarding the two companies, ten air samples and eight surface samples were collected. Air and surface samples were collected in food storage facilities, kitchen, food plating and canteen. Outdoor air was also collected since this is the place regarded as a reference. Simultaneously, temperature, relative humidity and meal numbers were registered. Concerning air from hospitals’ food units, 32 fungal species were identified, being the two most commonly isolated genera Penicillium sp.

Air fungal contamination in ten hospitals’ food units from Lisbon

A descriptive study was developed to monitor air fungal contamination in ten food units from hospitals. Fifty air samples of 250 litres were collected through impaction method. Samples were collected in food storage facilities, kitchen, food plating, canteen and also, outside premises, since this is the place regarded as reference. Simultaneously, environmental parameters were also monitored, including temperature and relative humidity through the equipment Babouc, LSI Sistems and according to the International Standard ISO 7726.

Comparison of indoor and outdoor fungi and particles in poultry units

A descriptive study was developed in order to compare indoor and outdoor air contamination caused by fungi and particles in seven poultry units. Twenty eight air samples of 25 litters were collected through the impaction method on malt extract agar. Air sampling and particles concentration measurement were done in the interior and also outside premises of the poultries’ pavilions. Regarding the fungal load in the air, indoor concentration of mold was higher than outside air in six poultry units. Twenty eight species / genera of fungi were identified indoor, being Scopulariopsis brevicaulis (40.5%) the most commonly isolated species and Rhizopus sp. (30.0%) the most commonly isolated genus. Concerning outdoor, eighteen species/genera of fungi were isolated, being Scopulariopsis brevicaulis (62.6%) also the most isolated. All the poultry farms analyzed presented indoor fungi different from the ones identified outdoors. Regarding particles’ contamination, PM2.5, PM5.0 and PM10 had a statistically significant difference (Mann-Whitney U test) between the inside and outside of the pavilions, with the inside more contaminated (p=.006; p=.005; p=.005, respectively). The analyzed poultry units are potential reservoirs of substantial amounts of fungi and particles and could therefore free them in the atmospheric air. The developed study showed that indoor air was more contaminated than outdoors, and this can result in emission of potentially pathogenic fungi and particles via aerosols from poultry units to the environment, which may post a considerable risk to public health and contribute to environmental pollution.

An heuristic approach for optimal location of gas supply units in transportation system

The best places to locate the Gas Supply Units (GSUs) on a natural gas systems and their optimal allocation to loads are the key factors to organize an efficient upstream gas infrastructure. The number of GSUs and their optimal location in a gas network is a decision problem that can be formulated as a linear programming problem. Our emphasis is on the formulation and use of a suitable location model, reflecting real-world operations and constraints of a natural gas system. This paper presents a heuristic model, based on lagrangean approach, developed for finding the optimal GSUs location on a natural gas network, minimizing expenses and maximizing throughput and security of supply.The location model is applied to the Iberian high pressure natural gas network, a system modelised with 65 demand nodes. These nodes are linked by physical and virtual pipelines – road trucks with gas in liquefied form. The location model result shows the best places to locate, with the optimal demand allocation and the most economical gas transport mode: by pipeline or by road truck.

Optimal location of gas supply units in natural gas system network

Natural gas industry has been confronted with big challenges: great growth in demand, investments on new GSUs – gas supply units, and efficient technical system management. The right number of GSUs, their best location on networks and the optimal allocation to loads is a decision problem that can be formulated as a combinatorial programming problem, with the objective of minimizing system expenses. Our emphasis is on the formulation, interpretation and development of a solution algorithm that will analyze the trade-off between infrastructure investment expenditure and operating system costs. The location model was applied to a 12 node natural gas network, and its effectiveness was tested in five different operating scenarios.