Syntyykö Suomeen puulaaksoja - Suomen puutuoteteollisuuden pk-yritysten tila ja tulevaisuus

Metsäteollisuus on tullut Suomeen ulkomaisen pääoman ja tietotaidon avulla vajaat kaksisataa vuotta sitten. Se on toiminut melkein koko jatkosodan jälkeisen ajan suojatussa ympäristössä ja ulkomaisesta kilpailusta riippumattomassa toimintaympäristössä. Kuten Porter ja muut ovat todistaneet, tällainen toimintaympäristö ei kehitä kansainvälisesti kilpailukykyistä teollisuutta globaaleilla markkinoilla. Liittyminen Euroopan unioniin ja sittemmin Euroopan rahaliittoon saattoi puunjalostusteollisuuden täysin uudenlaiseen kilpailutilanteeseen. Sama tapahtui myös alan pk-yrityksille, jotka olivat joutuneet toimimaan heikosti kilpailluilla raaka-ainemarkkinoilla. Tutkimus on tulevaisuudentutkimus, jossa tutkimusongelmia lähestytään kolmen teorian avulla. Porterin klusteriteoria tarjoaa mahdollisuuden arvioida metsäteollisuutta sekä kokonaisuutena että toimivana monimuotoisena organisaationa, jossa kustannukset ja hinta muodostuvat arvoketjun toimijoiden osakustannuksista. Bionomiateoria eli darvinistinen talousteoria testaa suomalaisen puunjalostusteollisuuden pk-yritysten kilpailukykyä ja paineita hakeutua edullisemmille toiminta- alueille. Evoluutioteoria tarkastelee sukupolvenvaihdoksen problematiikkaa. Sukupolvenvaihdoksen onnistuminen muodostuu puutoimialan elämän ja kuoleman kysymykseksi. Tämä on etenkin pk-yrityksiä kohtaava ongelma. Asiaa selvitettiin Mauno Rintalan suorittamalla kyselytutkimuksella Puuteollisuusyrittäjien jäsenistön keskuudessa. Ongelma johtuu suurista sodan jälkeen syntyneistä ikäluokista. Nämä vuosina 1945– 50 syntyneet ovat siirtymässä eläkkeelle vuosien 2005 ja 2015 välillä. Kyseisissä ikäluokissa yritystiheys on noin kaksi kertaa suurempi kuin sen jälkeisissä ikäluokissa. Suoritetun kyselyn sekä muiden suomalaisten ja kansainvälisten tutkimusten perusteella näyttää siltä, että eläkkeelle siirryttäessä vain noin 30 %:lla yrityksistä on jatkaja tiedossa suvusta tai lähipiiristä. Tämä merkitsee sitä, että 70 % eläköityvän ikäluokan omistamista yrityksistä poistuu pysyvästi markkinoilta. Suomessa poistuma merkitsee noin 40 % koko yritysvarannosta eli noin 80 000 yritystä. Tilastot toimivien yritysten määrästä ovat kuitenkin hyvin ristiriitaisia, joten todellista määrää on mahdoton arvioida. Noin suuren määrän poistuminen markkinoilta uhkaa jo hyvinvointivaltion perusrakenteita. Tutkimustulos edellyttää nopeita toimenpiteitä teollisten pkyritysten pelastamiseksi ja säilyttämiseksi Suomessa. Sukupolvenvaihdoksen onnistuminen on tässä prosessissa ensiarvoisessa asemassa. Kaikkien edellä mainittujen yritysten poistuminen markkinoilta edellyttäisi noin 400 000 uuden yrityksen perustamista, koska ainoastaan noin 20 % yrityksistä selviää ensimmäiset kolme vuotta. Tutkimukseen perustuen esitetään prosessimalli sukupolvenvaihdoksen suorittamiseksi. Suomen tärkeimmissä kilpailijamaissa valtioiden metsäomistus on määräävässä asemassa. Meillä metsät ovat yksityisessä omistuksessa ja vain pieni osa valtion omistuksessa. Puumarkkinat toimivat markkinatalouden ehdoilla ilman valtion ohjausta. Ongelmaksi on kehittymässä puun saanti. Metsänomistus on sukupolvien myötä hajaantunut hyvin pieniksi metsälöiksi. Nykyiset metsänomistajat asuvat kaupungeissa ja ovat pääosin palkkatyössä. He eivät ole samalla tavoin riippuvaisia puutuloista kuin heidän esi-isänsä. Metsäverotuksen uudistuminen lisää puun saannin epävarmuutta. Se on muuttumassa pinta-alaverotuksesta puun myynnin verotukseen. Puun myynti on vilkasta ennen järjestelmien vaihtumista ja vähäisempää sen jälkeen. Myös näitä ongelmia on pyritty ratkomaan uudenlaisen metsänomistusmallin avulla. Puuteollisuus on hyvin vanha teollisuudenala. Raaka-aine muodostaa määräävän osan kustannuksista. Muutokset ovat hitaita ja todelliset innovaatiot pitkäkestoisia. Uusia innovaatioita tapahtuu harvoin. Kannattavuutta parannetaan tuoteprosessien ja arvoketjujen kehittämisen kautta. Yhteiskunnan osuus alan kehittämisessä ja säilyttämisessä on ratkaiseva. Asioiden moninaisuus tekee tutkimuksen vaikeaksi, mutta sitäkin tärkeämmäksi kansantalouden kannalta. Tällaisissa suurissa murroksissa korostuu kaikkien päättävien tahojen henkinen valmius ja tahto tehdä oikeita ratkaisuja oikeaan aikaan.

Optimization of strength and toughness on the effect of the weldable high strength steels (hss) used in offshore structures

Optimization of high strength and toughness combination on the effect of weldability is very vital to be considered in offshore oil and gas industries. Having a balanced and improved high strength and toughness is very much recommended in offshore structures for an effective production and viable exploration of hydrocarbons. This thesis aims to investigate the possibilities to improve the toughness of high strength steel. High carbon contents induce hardness and needs to be reduced for increasing toughness. The rare combination of high strength with high toughness possibilities was examined by determining the following toughening mechanism of: Heat treatment and optimal microstructure, Thermomechanical processing, Effect of welding parameters on toughness and weldability of steel. The implementation of weldability of steels to attain high toughness for high strength in offshore structures is mostly in shipbuilding, offshore platforms, and pipelines for high operating pressures. As a result, the toughening mechanisms suggested have benefits to the aims of the effect of high strength to high toughness of steel for efficiency, production and cost reduction.

Suurlujuusterästen hitsausliitoksen muutosvyöhykkeen metallurgiset muutokset

Tässä kandidaatintyössä käsitellään suurlujuusteräksiä ja niiden hitsausta, keskittyen varsinkin hitsauksessa perusaineeseen syntyvään muutosvyöhykkeeseen. Työn alkuosio on suoritettu kirjallisuustutkimuksena ja siinä käydään läpi yleisesti suurlujuusterästen määrittelyä, valmistustapoja, hitsausta ja hitsaukseen liittyviä erityisnäkökohtia. Työn loppuosassa on tutustuttu suurlujuusteräksiä hitsattaessa syntyvään muutosvyöhykkeeseen koehitsien avulla. Suurlujuusteräksille ei ole luotu yleistä standardisoitua määrittelyasteikkoa, mutta teräksiä aletaan usein pitämään suurlujuusteräksinä kun niiden myötöraja ylittään 460–550 MPa. Tällaisia teräksiä voidaan valmistaa pääasiassa joko nuorruttamalla, termomekaanisesti valssaamalla tai suorakarkaisemalla. Valmistustavalla on suuri vaikutus teräksen hitsattavuuteen. Nuorrutetuille teräksille hitsattaessa muodostuvan muutosvyöhykkeen karkearakeisen osion raekoko voi kasvaa huomattavasti varsinkin suurempia lämmöntuonteja käytettäessä ja täten aiheuttaa merkittävääkin kovuuden kasvua, kuten myös tämän kandidaatintyön koehitseissä havaittiin. Termomekaanisesti valmistetuilla teräksillä ei vastaavanlaista kovuuden kasvua yleensä ilmene. Valmistustavasta riippumatta suurlujuusterästen mekaaniset ominaisuudet vaikuttaisivat heikentyvän kyseisellä vyöhykkeellä suurempia lämmöntuonteja käytettäessä. Suurlujuusterästen hitsausliitosten laatua pyritäänkin parantamaan jatkuvasti esimerkiksi kehittämällä materiaaleista paremmin hitsattavia ja hitsausprosesseista paremmin suurlujuusteräksien erityistarpeita huomioivia.

Electrochemical determination of plant-derived leuco-indigo after chemical reduction by glucose

Electrochemical determination of redox active dye species is demonstrated in indigo samples contaminated with high levels of organic and inorganic impurities. The use of a hydrodynamic electrode system based on a vibrating probe (250 Hz, 200 mu m lateral amplitude) allows time-independent diffusion controlled signals to be enhanced and reliable concentration data to be obtained under steady state conditions at relatively fast scan rates up to 4 V s-1In this work the indigo content of a complex plant-derived indigo sample (dye content typically 30%) is determined after indigo is reduced by addition of glucose in aqueous 0.2 M NaOH. The soluble leuco-indigo is measured by its oxidation response at a vibrating electrode. The vibrating electrode, which consisted of a laterally vibrating 500 mu m diameter gold disc, is calibrated with Fe(CN)(6) 3-/4- in 0.1 M KCl and employed for indigo determination at 55, 65, and 75 C in 0.2 M NaOH. Determinations of the indigo content of 25 different samples of plant-derived indigo are compared with those obtained by conventional spectrophotometry. This comparison suggests a significant improvement by the electrochemical method, which appears to be less sensitive to impurities.

Gas-solid reactions of single crystals: a study of the reaction of bromine with single crystals of trans-cinnamic acid and a range of its derivatives by infrared and Raman microspectroscopy

Single crystals of trans-cinnamic acid and of a range of derivatives of this compound containing halogen substituents on the aromatic ring have been reacted with 165 Torr pressure of bromine vapour in a sealed desiccator at 20 degrees C for 1 week. Infrared and Raman microspectroscopic examination of the crystals shows that bromination of the aliphatic double bond, but not of the aromatic ring, has occurred. It is demonstrated also that the reaction is truly gas-solid in nature. A time-dependent study of these reactions shows that they do not follow a smooth diffusion-controlled pathway. Rather the reactions appear to be inhomogeneous and to occur at defects within the crystal. The reaction products are seen to flake from the surface of the crystal. It is shown, therefore, that these are not single crystal to single crystal transitions, as have been observed previously for the photodimerisation of trans-cinnamic acid and several of its derivatives. It is shown that there are no by-products of the reaction and that finely ground samples react to form the same products as single crystals.

A molecular and structural characterization of senescing Arabidopsis siliques and comparison of transcriptional profiles with senescing petals and leaves

Senescence of plant organs is a genetically controlled process that regulates cell death to facilitate nutrient recovery and recycling, and frequently precedes, or is concomitant with, ripening of reproductive structures. In Arabidopsis thaliana, the seeds are contained within a silique, which is itself a photosynthetic organ in the early stages of development and undergoes a programme of senescence prior to dehiscence. A transcriptional analysis of the silique wall was undertaken to identify changes in gene expression during senescence and to correlate these events with ultrastructural changes. The study revealed that the most highly up-regulated genes in senescing silique wall tissues encoded seed storage proteins, and the significance of this finding is discussed. Global transcription profiles of senescing siliques were compared with those from senescing Arabidopsis leaf or petal tissues using microarray datasets and metabolic pathway analysis software (MapMan). In all three tissues, members of NAC and WRKY transcription factor families were up-regulated, but components of the shikimate and cell-wall biosynthetic pathways were down-regulated during senescence. Expression of genes encoding ethylene biosynthesis and action showed more similarity between senescing siliques and petals than between senescing siliques and leaves. Genes involved in autophagy were highly expressed in the late stages of death of all plant tissues studied, but not always during the preceding remobilization phase of senescence. Analyses showed that, during senescence, silique wall tissues exhibited more transcriptional features in common with petals than with leaves. The shared and distinct regulatory events associated with senescence in the three organs are evaluated and discussed.

New mathematical modeling approach for predicting microbial inactivation by high hydrostatic pressure

A new primary model based on a thermodynamically consistent first-order kinetic approach was constructed to describe non-log-linear inactivation kinetics of pressure-treated bacteria. The model assumes a first-order process in which the specific inactivation rate changes inversely with the square root of time. The model gave reasonable fits to experimental data over six to seven orders of magnitude. It was also tested on 138 published data sets and provided good fits in about 70% of cases in which the shape of the curve followed the typical convex upward form. In the remainder of published examples, curves contained additional shoulder regions or extended tail regions. Curves with shoulders could be accommodated by including an additional time delay parameter and curves with tails shoulders could be accommodated by omitting points in the tail beyond the point at which survival levels remained more or less constant. The model parameters varied regularly with pressure, which may reflect a genuine mechanistic basis for the model. This property also allowed the calculation of (a) parameters analogous to the decimal reduction time D and z, the temperature increase needed to change the D value by a factor of 10, in thermal processing, and hence the processing conditions needed to attain a desired level of inactivation; and (b) the apparent thermodynamic volumes of activation associated with the lethal events. The hypothesis that inactivation rates changed as a function of the square root of time would be consistent with a diffusion-limited process.

Processing of electroactive nanostructured films incorporating carbon nanotubes and phthalocyanines for sensing

The use of carbon nanotubes (CNTs) combined with other materials in nanostructured films has demonstrated their versatility in tailoring specific properties. In this study, we produced layer-by-layer (LbL) films of polyamidoamine-PAMAM-incorporating multiwalled carbon nanotubes (PAMAM-NT) alternated with nickel tetrasulfonated metallophthalocyanine (NiTsPc), in which the incorporation of CNTs enhanced the NiTsPc redox process and its electrocatalytic properties for detecting dopamine. Film growth was monitored by UV-vis spectroscopy, which pointed to an exponential growth of the multilayers, whose roughness increased with the number of bilayers according to atomic force microscopy (AFM) analysis. Strong interactions between -NH3+ terminal groups from PAMAM and -SO3- from NiTsPc were observed via infrared spectroscopy, while the micro-Raman spectra confirmed the adsorption of carbon nanotubes (CNTs) onto the LbL film containing NiTsPc. Cyclic voltammograms presented well-defined electroactivity with a redox pair at 0.86 and 0.87 V, reversibility, a charge-transfer controlled process, and high stability up to 100 cycles. The films were employed successfully in dopamine (DA) detection, with limits of detection and quantification of 10(-7) and 10(-6) mol L-1, respectively. Furthermore, films containing immobilized CNTs could distinguish between DA and its natural interferent, ascorbic acid (AA).

Radical acetylation of 2`-deoxyguanosine and L-histidine coupled to the reaction of diacetyl with peroxynitrite in aerated medium

Diacetyl, like other alpha-dicarbonyl compounds, is reportedly cytotoxic and genotoxic. A food and cigarette contaminant, it is related with alcohol hepatotoxicity and lung disease. Peroxynitrite is a potent oxidant formed in vivo by the diffusion-controlled reaction of the superoxide radical anion with nitric oxide, which is able to form adducts with carbon dioxide and carbonyl compounds. Here, we investigate the nucleophilic addition of peroxynitrite to diacetyl forming acetyl radicals, whose reaction with molecular oxygen leads to acetate. Peroxynitrite is shown to react with diacetyl in phosphate buffer (bell-shaped pH profile with maximum at 7.2) at a very high rate constant (k(2) = 1.0 X 10(4) M-1 s(-1)) when compared with monocarbonyl substrates (k(2) < 10(3) M-1 s(-1)). Phosphate ions (100-500 MM) do not affect the rate of spontaneous peroxynitrite decay, but the H2PO4- anion catalyzes the nucleophilic addition of the peroxynitrite anion to diacetyl. The intermediacy of acetyl radicals is suggested by a three-line spectrum (a(N) = a(H) = 0.83 mT) obtained by EPR spin trapping of the reaction mixture with 2-methyl-2-nitrosopropane. The peroxynitrite reaction is accompanied by concentration-dependent oxygen uptake. Stoichiometric amounts of acetate from millimolar amounts of peroxynitrite and diacetyl were obtained under nonlimiting conditions of dissolved oxygen. In the presence of either L-histidine or 2`-deoxyguanosine, the peroxynitrite/diacetyl system afforded the corresponding acetylated molecules identified by HPLC-MS"". These studies provide evidence that the peroxynitrite/diacetyl reaction yields acetyl radicals and raise the hypothesis that protein and DNA nonenzymatic acetylation may occur in cells and be implicated in aging and metabolic disorders in which oxygen and nitrogen reactive species are putatively involved.

Picosecond Dynamics of Proton Transfer of a 7-Hydroxyflavylium Salt in Aqueous-Organic Solvent Mixtures

The intermediacy of the geminate base proton pair (A*center dot center dot center dot H(+)) in excited-state proton-transfer (ESPT) reactions (two-step mechanism) has been investigated employing the synthetic flavylium salt 7-hydroxy-4-methyl-flavylium chloride (HMF). In aqueous solution, the ESPT mechanism involves solely the excited acid AH* and base A* forms of HMF as indicated by the fluorescence spectra and double-exponential fluorescence decays (two species, two decay times). However, upon addition of either 1,4-dioxane or 1,2-propylene glycol, the decays become triple-exponential with a term consistent with the presence of the geminate base proton pair A*center dot center dot center dot H(+). The geminate pair becomes detectable because of the increase in the recombination rate constant, k(rec), of (A*center dot center dot center dot H(+)) with increasing the mole fraction of added organic cosolvent. Because the two-step ESPT mechanism splits the intrinsic prototropic reaction rates (deprotonation of AH(+)*, k(d), and recombination, k(rec) of A*center dot center dot center dot H(+)) from the diffusion controlled rates (dissociation, k(diss) and formation, k(diff)[H(+)], of A*center dot center dot center dot H+), the experimental detection of the geminate pair provides a wealth of information on the proton-transfer reaction (k(d) and k(rec)) as well as on proton diffusion/migration (k(diss) and k(diff)).

Quenching of excited states of red-pigment zinc protoporphyrin IX by hemin and natural reductors in dry-cured hams

Zinc protoporphyrin IX (ZnPP), the major red pigment in hams dry-cured without nitrates/nitrites, is an efficient photosensitizer, which upon absorption of visible light forms short-lived excited singlet state ((1)ZnPP*) and by intersystem crossing yields the very reactive triplet-excited state ((3)ZnPP*). Using nano-second laser flash photolysis and transient absorption spectroscopy NADH, ascorbic acid, hemin and dehydroascorbic acid were each found to be efficient quenchers of (3)ZnPP*. The deactivation followed, in homogeneous dimethyl sulfoxide (DMSO) or DMSO:water (1:1) solutions, second-order kinetics. The rate constant for ascorbic acid and NADH for reductive quenching of (3)ZnPP* was at 25 A degrees C found to be 7.5 +/- A 0.1 x 10(4) L mol(-1) s(-1) and 6.3 +/- A 0.1 x 10(5) L mol(-1) s(-1), respectively. The polyphenols catechin and quercetin had no effect on (3)ZnPP*. The quenching rate constant for oxidative deactivation of (3)ZnPP* by dehydroascorbic acid and hemin was at 25 A degrees C: 1.6 +/- A 0.1 x 10(5) L mol(-1) s(-1) and 1.47 +/- A 0.1 x 10(9) L mol(-1) s(-1), respectively. Oxidized glutathione did not act as an oxidative quencher for (3)ZnPP*. After photoexcitation of ZnPP to (1)ZnPP*, fluorescence was only found to be quenched by the presence of hemin in a diffusion-controlled reaction. The efficient deactivation of (3)ZnPP* and (1)ZnPP* by the metalloporphyrin (hemin) naturally present in meat may accordingly inherently protect meat proteins and lipids against ZnPP photosensitized oxidation.

Thermal stability of extracellular hemoglobin of Glossoscolex paulistus: Determination of activation parameters by optical spectroscopic and differential scanning calorimetric studies

Glossoscolex paulistus hemoglobin (HbGp) was studied by dynamic light scattering (DLS), optical absorption spectroscopy (UV-VIS) and differential scanning calorimetry (DSC). At pH 7.0, cyanomet-HbGp is very stable, no oligomeric dissociation is observed, while denaturation occurs at 56 degrees C, 4 degrees C higher as compared to oxy-HbGp. The oligomeric dissociation of HbGp occurs simultaneously with some protein aggregation. Kinetic studies for oxy-HbGp using UV-VIS and DES allowed to obtain activation energy (E(a)) values of 278-262 kJ/mol (DES) and 333 kJ/mol (UV-VIS). Complimentary DSC studies indicate that the denaturation is irreversible, giving endotherms strongly dependent upon the heating scan rates, suggesting a kinetically controlled process. Dependence on protein concentration suggests that the two components in the endotherms are due to oligomeric dissociation effect upon denaturation. Activation energies are in the range 200-560 kJ/mol. The mid-point transition temperatures were in the range 50-65 degrees C. Cyanomet-HbGp shows higher mid-point temperatures as well as activation energies, consistent with its higher stability. DSC data are reported for the first time for an extracellular hemoglobin. (C) 2010 Elsevier B.V. All rights reserved.

Silver Nanoparticles Obtained in PAH/PAA-Based Multilayers by Photochemical Reaction

Carboxylic acid groups in PAH/PAA-based multilayers bind silver cations by ion exchange with the acid protons. The aggregation and spatial distribution of the nanoparticles proved to be dependent oil the process used to reduce the silver acetate aqueous solution. The reducing method with ambient light formed larger nanoparticles with diameters ranging from 4-50 nm in comparison with the reduction method using UV light, which gave particles with diameters of 2-4 nm The high toughness of samples reduced by ambient light is a result of two population distributions of particle sizes caused by different mechanisms when compared with the UV light process. According to these phenomena, a judicious choice of the spectral source call be used as a way to control the type and size of silver nanoparticles formed on PEMs. Depending on the energy of the light source, the Ag nanoparticles present cubic and/or hexagonal crystallographic structures, as confirmed by XRD. Beyond the kinetically controlled process of UV photoinduced cluster formation, the annealing produced by UV light allowed a second mechanism to modify the growth rates, spatial distribution, and phases.

SISAL - Um sistema supervisório para elevação artificial de petróleo

MEDEIROS, Adelardo A. D. et al. SISAL - Um Sistema Supervisório para Elevação Artificial de Petróleo. In: Rio Oil and Gas Expo Conference, 2006, Rio de Janeiro, RJ. Anais... Rio de Janeiro, 2006.

Dynamics and Heterogeneity of Pb(II) Binding by SiO2 Nanoparticles in an Aqueous Dispersion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)