Princípios de redução das fraturas panfaciais: revisão de literatura

Are called panfacial fractures when the upper, middle and lower facial thirds present fractures concurrently. In clinical practice, came to imply the involvement of two facial thirds. Panfacial fractures are usually accompanied by other systemic lesions that impair the patient's life and therefore require primary treatment. Almost invariably are associated with damage to soft tissues and severe losses of bone structures which may lead to severe facial deformations and malocclusions. The panfacial fractures treatment is complex because often there isn’t a stable bone structure to guide the reduction of various fractures. Several orders of treatment have been proposed, but they are variations of the two classical approaches "bottom to top and inside-out" and "top to bottom and out-inside". The aim of this paper is to discuss the principles of management and panfacial fractures treatment, emphasizing the sequence of fracture reduction and highlighting its indications, advantages and disadvantages, through literature review and reports of surgical clinic cases. We conclude that the exact sequence of fracture reduction is not as important as developing a treatment plan that allows accurate positioning of the fractured segments.

Temporomandibular disorders in females: acupuncture compared to occlusal splint

To compare the effect of acupuncture and occlusal splint in the treatment of temporomandibular disorders (TMD) in female patients.Method: Forty-eight female patients (mean age of 39.3±6.8 years) with diagnosed pain in muscles or joint according to RDC/TMD criteria were attended at UNESP - Aracatuba Dental School. Including criteria were reported pain in the chewing muscles and/or in the temporomandibular joint measured by a visual analogue scale (range from 0 to 10) and a reported reduction of the maximum mouth opening. Excluding factors were major occlusal problems, systemic diseases, pregnancy and age below 18 years. After randomization, the first group was treated with acupuncture performed by instructed dentist. The second group was treated with occlusal splint. The outcome variables were assessed at baseline (prior to the first treatment session) and after 1, 3 and 6 months. Primary criteria of success were improvement of mouth opening and pain reduction.Result: Acupuncture group exhibited chewing pain decrease from 5 (at baseline) to 1, 2 and 1 after 1, 3 and 6 months, respectively. In the splint group, chewing pain decreased from 4 to 2, 1 and 2 after 1, 3 and 6 months, respectively. The mouth opening (in mm) increased from 28 (at baseline) to 42, 44 and 46 after 1, 3 and 6 months, respectively in the acupuncture group. In the splint group, mouth opening improved from 29 to 40 after 1 month, and to 43 and 42 after 3 and 6 months. A significant pain reduction was noted for both groups when compared to the baseline (p<.001; Wilcoxon test). Acupuncture group had a significant clinical improvement of opening mouth (Mann-Whitney). Conclusion: The present outcomes suggest a positive association among acupuncture and occlusal splint on the reduction of chewing pain. Acupuncture was more effective in the mouth opening increase.

Parafunção severa: reabilitação oral com prótese total mandibular x overlay maxilar: relato de caso

In many oral rehabilitation professionals seeking venture renew people smile. However, these procedures have functional implications and aesthetic criteria which must be satisfied so that the final result is predictable. The restoration of relations intermaxillary, phonetics, masticatory function, esthetics and patient comfort are the goals to be achieved. An effective way to achieve these goals when immediate reconstruction with permanent dentures is not possible, make use of a type of partial denture called overlay. Bruxism is a manifestation of biopsychological imbalance that affects the stomatognathic system, characterized by clenching and / or attrition of teeth together so centric or eccentric, can be manifestation of nocturnal or diurnal. Its effects can manifest themselves in different parts of the stomatognathic system, varying the severity of the damage as the resistance of the structures affected, the time of existence, its regularity and the general state of the wearer. The description of the steps followed in solving this case, in which the patient edentulous mandibular arch while the maxillary arch showed absence of teeth 16 and 26 and, except for the teeth 17 and 27, all other teeth showed wear very sharp in the sense denoting incisal cervical, severe impairment of the vertical dimension, the quality of masticatory function and a marked impairment phonetic, this case report aims to guide the beginning of a rehabilitation, as well as the transitional phase of treatment for recovery of functional and aesthetic relationships intermaxillary .

Tratamento compensatorio da má oclusnao de classe lll: revisão de literatura

Class III malocclusion is less common occlusal relationship, covering less than 5% of the population. There are various forms of treatment in Class III malocclusion. Depending on how the form is expressed Class III and age of the patient, the therapy may be orthopedic and orthodontic surgical orthodontics. The objective was to review the literature of the last 10 years about ways to compensatory treatment of Class III malocclusion. Several articles were published between 04/2003 and 04/2013 in the Pubmed database from the keyword "Class III malocclusion". However, only 19 articles that addressed the compensatory treatment of Class III were selected. Based on the selected items it was concluded that the treatment of Class III malocclusions in children before the peak of pubertal growth has better prognosis with greater effects orthopedic and orthodontic minor effects. The ideal treatment option for this condition is the Rapid maxillary expansion associated with maxillary protraction of the same. The treatment of Class III malocclusion in young people after the peak of pubertal growth is doubtful prognosis. You can opt to treat rapid maxillary expansion and maxillary protraction of the same or fixed appliance, however, orthopedic effects can be the same or smaller than the orthodontic effects, depending on the age of the patient. Depending on the degree of Class III malocclusion in adults, the treatment will consist of dental compensations or orthognathic surgery.

Oclusão em prótese sobre implante - parte I

Osseointegrated implants have specific nature distinguish them from natural teeth making them more susceptible to the efforts generated by mastication. The absence of periodontal ligament, which absorbs the masticatory forces and allows the movement of the teeth interfere with the reception of occlusal loads and therefore the predictability of implants. In the boneimplant interface did not occur the phenomena of dissipation of impact, even the movement induced. Thus, during planning and installation of implant prosthesis, the type and characteristics of occlusal pattern adopted should be established with criteria to be no grounds for future failures. In this regard we highlight the occlusal overload generated by several reasons like the presence of premature contacts, interference during motion excursive, deleterious habits and inappropriate extensions on cantilevers. Thus, the objective is to provide a review of the literature regarding the importance of occlusion in oral rehabilitation with implants. Factors to be considered in establishing a favorable occlusion, consistent with prostheses on implants will be described

Oclusão em prótese sobre implante - parte II

In part I of this article, the factors related to the establishment of a favourable occlusion for the implant prosthodontics as well as its real importance in this kind of rehabilitation were showed up. However, it is known that the occlusal characteristics adopted in implant prosthodontics show specific patterns which must be different between each other in accordance to the type of prosthesis installed. The objective of the second part of this work is to present to the reader, by a literature review, those characteristics, justifying the reason because they must be associated to specific kind of prosthesis for favor the treatment established.

Saúde bucal de adolescentes que receberam assistência odontológica na primeira década de vida

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Submental Endotracheal Intubation: A Valuable Resource for the Management of Panfacial Fractures

Modern techniques for surgical treatment of midfacial and panfacial fractures in maxillofacial trauma lead to special problems for airway management. Usually, in perioperative management of panfacial fractures, the surgeon needs to control the dental occlusion and nasal pyramid assessment. For these reasons, oral and nasal endotracheal intubations are contraindicated for the management of panfacial fractures. Tracheotomy is considered by many as the preferred route for airway management in patients with severe maxillofacial fractures, but there are often perioperative and postoperative complications concerning this technique. The submental route for endotracheal intubation has been proposed as an alternative to tracheotomy in the surgical management of patients with panfacial fractures, besides it is accompanied by low morbidity. Thus, this paper aimed to describe the submental endotracheal intubation technique in a patient experiencing panfacial fracture. The subject was well treated using the submental endotracheal intubation to get good reconstruction of the fractures because the authors obtained free access of all facial fractures.

The effect of a Lucia jig for 30 minutes on neuromuscular re-programming, in normal subjects

The Lucia jig is a technique that promotes neuromuscular reprogramming of the masticatory system and allows the stabilization of the mandible without the interference of dental contacts, maintaining the mandible position in harmonic condition with the musculature in normal subjects or in patients with temporomandibular dysfunction (TMD). This study aimed to electromyographically analyze the activity (RMS) of the masseter and temporal muscles in normal subjects (control group) during the use of an anterior programming device, the Lucia jig, in place for 0, 5, 10, 20 and 30 minutes to demonstrate its effect on the stomatognathic system. Forty-two healthy dentate individuals (aged 21 to 40 years) with normal occlusion and without parafunctional habits or ternporomandibular dysfunction (RDC/TMD) were evaluated on the basis of the electromyographic activity of the masseter and temporal muscles before placement of a neuromuscular re-programming device, the Lucia jig, on the upper central incisors. There were no statistically significant differences (p < 0.05) in the electromyographic activity of the masticatory muscles in the different time periods. The Lucia jig changed the electromyographic activity by promoting a neuromuscular reprogramming. In most of the time periods, it decreased the activation of the masticatory muscles, showing that this device has wide applicability in dentistry. The use of a Lucia jig over 0, 5, 10, 15, 20 and 30 minutes did not promote any statistically significant increase in muscle activity despite differences in the data, thus showing that this intra-oral device can be used in dentistry.

Masticatory efficiency in class II and class III dentofacial deformities

Masticatory efficiency may be impaired in individuals with dentofacial deformities. The objective of the present study was to determine the condition of masticatory efficiency in individuals with dentofacial deformities. 30 patients with class II (DG-II) and 35 patients with class III (DG-III) dentofacial deformity participated in the study, all had an indication for orthognathic surgery. 30 volunteers (CG) with no alterations of facial morphology or dental occlusion and with no signs or symptoms of temporomandibular joint dysfunction also participated. Masticatory efficiency was analysed using a bead system (colorimetric method). Each individual chewed 4 beads, one at a time, over 20 s measured with a chronometer. The groups were compared in term's of masticatory efficiency using analysis of variance (ANOVA), with the level of significance set at P < 0.05. Masticatory efficiency was significantly greater in CG (P < 0.05) than in DG-II and DG-III in all chewing tasks tested, with no significant difference between DG-II and DG-III (P > 0.05). It was observed that the presence of class II and class III dentofacial deformity affected masticatory efficiency compared to CG, although there was no difference between DG-II and DG-III.

Influence of adenotonsillectomy on hard palate dimensions

Objective: To evaluate hard palate width and height in mouth-breathing children pre- and post-adenotonsillectomy. Methods: We evaluated 44 children in the 3-6 year age bracket, using dental study casts in order to determine palatal height, intercanine width, and intermolar width. The children were divided into two groups: nasal breathing (n = 15) and mouth breathing (n = 29). The children in the latter group underwent adenotonsillectomy. The study casts were obtained prior to adenotonsillectomy, designated time point 1(11), at 13 months after adenotonsillectomy (T2), and at 28 months after adenotonsillectomy (13). Similar periods of observation were obtained for nasal breathing children. Results: At T1, there was a significantly lower intercanine width in mouth breathing children; intermolar width and palate height were similar between groups. After surgery, there was a significant increase in all the analyzed parameters in both groups, probably due to facial growth. Instead, the increase in intercanine width was substantially more prominent in mouth breathing children than in nasal breathing children, and the former difference failed in significance after the procedure. Conclusions: There were no significant differences between the nasal-breathing and mouth-breathing children in terms of intermolar width and palatal height prior to or after tonsillectomy. Although intercanine width was initially narrower in the mouth-breathing children, it showed normalization after the surgical procedure. These results confirm that the restoration of nasal breathing is central to proper occlusal development. (C) 2012 Elsevier Ireland Ltd. All rights reserved.

Study of the number of occlusal contacts in maximum intercuspation before orthodontic treatment in subjects with Angle Class I and Class II Division 1 malocclusion

OBJECTIVE: Define and compare numbers and types of occlusal contacts in maximum intercuspation. METHODS: The study consisted of clinical and photographic analysis of occlusal contacts in maximum intercuspation. Twenty-six Caucasian Brazilian subjects were selected before orthodontic treatment, 20 males and 6 females, with ages ranging between 12 and 18 years. The subjects were diagnosed and grouped as follows: 13 with Angle Class I malocclusion and 13 with Angle Class II Division 1 malocclusion. After analysis, the occlusal contacts were classified according to the established criteria as: tripodism, bipodism, monopodism (respectively, three, two or one contact point with the slope of the fossa); cuspid to a marginal ridge; cuspid to two marginal ridges; cuspid tip to opposite inclined plane; surface to surface; and edge to edge. RESULTS: The mean number of occlusal contacts per subject in Class I malocclusion was 43.38 and for Class II Division 1 malocclusion it was 44.38, this difference was not statistically significant (p>0.05). CONCLUSIONS: There is a variety of factors that influence the number of occlusal contacts between a Class I and a Class II, Division 1 malocclusion. There is no standardization of occlusal contact type according to the studied malocclusions. A proper selection of occlusal contact types such as cuspid to fossa or cuspid to marginal ridge and its location in the teeth should be individually defined according to the demands of each case. The existence of an adequate occlusal contact leads to a correct distribution of forces, promoting periodontal health.

A new system for computer-aided preoperative planning and intraoperative navigation during corrective jaw surgery

A new system for computer-aided corrective surgery of the jaws has been developed and introduced clinically. It combines three-dimensional (3-D) surgical planning with conventional dental occlusion planning. The developed software allows simulating the surgical correction on virtual 3-D models of the facial skeleton generated from computed tomography (CT) scans. Surgery planning and simulation include dynamic cephalometry, semi-automatic mirroring, interactive cutting of bone and segment repositioning. By coupling the software with a tracking system and with the help of a special registration procedure, we are able to acquire dental occlusion plans from plaster model mounts. Upon completion of the surgical plan, the setup is used to manufacture positioning splints for intraoperative guidance. The system provides further intraoperative assistance with the help of a display showing jaw positions and 3-D positioning guides updated in real time during the surgical procedure. The proposed approach offers the advantages of 3-D visualization and tracking technology without sacrificing long-proven cast-based techniques for dental occlusion evaluation. The system has been applied on one patient. Throughout this procedure, we have experienced improved assessment of pathology, increased precision, and augmented control.

ANÁLISE CEFALOMÉTRICA LATERAL DE RICKETTS: JOVENS DA REGIÃO NORTE DO BRASIL

Este trabalho teve como objetivo determinar as normas cefalométricas de medidas da análise lateral de RICKETTS 54 de 1981, numa amostra de indivíduos brasileiros, leucodermas, com oclusão normal, sem tratamento ortodôntico prévio, da Região Norte do Brasil e comparar estes valores com os preconizados por RICKETTS54 realizando a projeção destes valores para 18 anos de idade, a fim de tornar possível esta comparação. E determinar a freqüência dos diferentes tipos faciais obtidos pelo índice VERT (quantidade de crescimento vertical), obtido por meio da análise lateral de RICKETTS et al55 de 1982. O material constou de 28 telerradiografias em norma lateral de 15 indivíduos do sexo masculino e 13 do sexo feminino, com idades entre 20 e 26 anos, com média de idade de 22,42 anos. Estes indivíduos foram selecionados na Faculdade de odontologia do CESUPA (Centro Universitário do Pará). O método eleito para os traçados cefalométricos foi o computadorizado (programa Radiocef 2.0). Os resultados permitiram depreender que esta amostra da Região Norte do Brasil quando comparada aos valores normativos preconizados por RICKETTS54 apresentam: Biprotrusão dentária; maxila protruída; padrão braquifacial com tendência para mordida profunda; os molares superiores encontram-se numa posição mais posterior; incisivos inferiores protruídos e vestibularizados; incisivos superiores com inclinação adequada e bem posicionados na base óssea; lábio inferior equilibrado; profundidade facial aumentada; crescimento equilibrado do eixo facial; mandíbula rotacionada no sentido horário, plano palatal com inclinação no sentido horário. Quanto à freqüência dos tipos faciais obtidos pelo índice VERT, do total da amostra estudada 50% dos indivíduos eram braquifaciais, 39,28% dolicofaciais e 10,72% mesofaciais.(AU)

ANÁLISE CEFALOMÉTRICA LATERAL DE RICKETTS: JOVENS DA REGIÃO NORTE DO BRASIL

Este trabalho teve como objetivo determinar as normas cefalométricas de medidas da análise lateral de RICKETTS 54 de 1981, numa amostra de indivíduos brasileiros, leucodermas, com oclusão normal, sem tratamento ortodôntico prévio, da Região Norte do Brasil e comparar estes valores com os preconizados por RICKETTS54 realizando a projeção destes valores para 18 anos de idade, a fim de tornar possível esta comparação. E determinar a freqüência dos diferentes tipos faciais obtidos pelo índice VERT (quantidade de crescimento vertical), obtido por meio da análise lateral de RICKETTS et al55 de 1982. O material constou de 28 telerradiografias em norma lateral de 15 indivíduos do sexo masculino e 13 do sexo feminino, com idades entre 20 e 26 anos, com média de idade de 22,42 anos. Estes indivíduos foram selecionados na Faculdade de odontologia do CESUPA (Centro Universitário do Pará). O método eleito para os traçados cefalométricos foi o computadorizado (programa Radiocef 2.0). Os resultados permitiram depreender que esta amostra da Região Norte do Brasil quando comparada aos valores normativos preconizados por RICKETTS54 apresentam: Biprotrusão dentária; maxila protruída; padrão braquifacial com tendência para mordida profunda; os molares superiores encontram-se numa posição mais posterior; incisivos inferiores protruídos e vestibularizados; incisivos superiores com inclinação adequada e bem posicionados na base óssea; lábio inferior equilibrado; profundidade facial aumentada; crescimento equilibrado do eixo facial; mandíbula rotacionada no sentido horário, plano palatal com inclinação no sentido horário. Quanto à freqüência dos tipos faciais obtidos pelo índice VERT, do total da amostra estudada 50% dos indivíduos eram braquifaciais, 39,28% dolicofaciais e 10,72% mesofaciais.(AU)